The cxgb_extension_ioctl function in drivers/net/cxgb3/cxgb3_main.c in the Linux kernel before 2.6.36-rc5 does not properly initialize a certain structure member, which allows local users to obtain potentially sensitive information from kernel stack memory via a CHELSIO_GET_QSET_NUM ioctl call.
The xfs_ioc_fsgetxattr function in fs/xfs/linux-2.6/xfs_ioctl.c in the Linux kernel before 2.6.36-rc4 does not initialize a certain structure member, which allows local users to obtain potentially sensitive information from kernel stack memory via an ioctl call.
Red Hat OpenShift Enterprise 3.1 uses world-readable permissions on the /etc/origin/master/master-config.yaml configuration file, which allows local users to obtain Active Directory credentials by reading the file.
The xfs_swapext function in fs/xfs/xfs_dfrag.c in the Linux kernel before 2.6.35 does not properly check the file descriptors passed to the SWAPEXT ioctl, which allows local users to leverage write access and obtain read access by swapping one file into another file.
ICMP information such as (1) netmask and (2) timestamp is allowed from arbitrary hosts.
The tpm_read function in the Linux kernel 2.6 does not properly clear memory, which might allow local users to read the results of the previous TPM command.
The xfs_fs_geometry function in fs/xfs/xfs_fsops.c in the Linux kernel before 2.6.38-rc6-git3 does not initialize a certain structure member, which allows local users to obtain potentially sensitive information from kernel stack memory via an FSGEOMETRY_V1 ioctl call.
The task_show_regs function in arch/s390/kernel/traps.c in the Linux kernel before 2.6.38-rc4-next-20110216 on the s390 platform allows local users to obtain the values of the registers of an arbitrary process by reading a status file under /proc/.
LXD before 2.0.2 does not properly set permissions when switching an unprivileged container into privileged mode, which allows local users to access arbitrary world readable paths in the container directory via unspecified vectors.
net/ipv4/netfilter/ip_tables.c in the IPv4 implementation in the Linux kernel before 2.6.39 does not place the expected '\0' character at the end of string data in the values of certain structure members, which allows local users to obtain potentially sensitive information from kernel memory by leveraging the CAP_NET_ADMIN capability to issue a crafted request, and then reading the argument to the resulting modprobe process.
The Linux kernel, as used in Ubuntu 18.04 LTS and Ubuntu 18.10, allows local users to obtain names of files in which they would not normally be able to access via an overlayfs mount inside of a user namespace.
A data exposure flaw was found in Ansible Tower in versions before 3.7.2, where sensitive data can be exposed from the /api/v2/labels/ endpoint. This flaw allows users from other organizations in the system to retrieve any label from the organization and also disclose organization names. The highest threat from this vulnerability is to confidentiality.
The tcf_fill_node function in net/sched/cls_api.c in the netlink subsystem in the Linux kernel 2.6.x before 2.6.32-rc5, and 2.4.37.6 and earlier, does not initialize a certain tcm__pad2 structure member, which might allow local users to obtain sensitive information from kernel memory via unspecified vectors. NOTE: this issue exists because of an incomplete fix for CVE-2005-4881.
The bcm_connect function in net/can/bcm.c (aka the Broadcast Manager) in the Controller Area Network (CAN) implementation in the Linux kernel 2.6.36 and earlier creates a publicly accessible file with a filename containing a kernel memory address, which allows local users to obtain potentially sensitive information about kernel memory use by listing this filename.
arch/x86/kvm/x86.c in the Linux kernel before 2.6.36.2 does not initialize certain structure members, which allows local users to obtain potentially sensitive information from kernel stack memory via read operations on the /dev/kvm device.
The ax25_getname function in net/ax25/af_ax25.c in the Linux kernel before 2.6.37-rc2 does not initialize a certain structure, which allows local users to obtain potentially sensitive information from kernel stack memory by reading a copy of this structure.
An exposure of sensitive information flaw was found in Ansible version 3.7.0. Sensitive information, such tokens and other secrets could be readable and exposed from the rsyslog configuration file, which has set the wrong world-readable permissions. The highest threat from this vulnerability is to confidentiality. This is fixed in Ansible version 3.7.1.
A flaw was found in Ansible Tower when running jobs. This flaw allows an attacker to access the stdout of the executed jobs which are run from other organizations. Some sensible data can be disclosed. However, critical data should not be disclosed, as it should be protected by the no_log flag when debugging is enabled. This flaw affects Ansible Tower versions before 3.6.4, Ansible Tower versions before 3.5.6 and Ansible Tower versions before 3.4.6.
The btrfs_ioctl_clone function in fs/btrfs/ioctl.c in the btrfs functionality in the Linux kernel 2.6.29 through 2.6.32, and possibly other versions, does not ensure that a cloned file descriptor has been opened for reading, which allows local users to read sensitive information from a write-only file descriptor.
gdm3 3.14.2 and possibly later has an information leak before screen lock
The mm_for_maps function in fs/proc/base.c in the Linux kernel 2.6.30.4 and earlier allows local users to read (1) maps and (2) smaps files under proc/ via vectors related to ELF loading, a setuid process, and a race condition.
The pagemap_open function in fs/proc/task_mmu.c in the Linux kernel before 3.19.3, as used in Android 6.0.1 before 2016-03-01, allows local users to obtain sensitive physical-address information by reading a pagemap file, aka Android internal bug 25739721.
libosinfo 1.5.0 allows local users to discover credentials by listing a process, because credentials are passed to osinfo-install-script via the command line.
virt-bootstrap 1.1.0 allows local users to discover a root password by listing a process, because this password may be present in the --root-password option to virt_bootstrap.py.
Xen allows guest OS users to obtain sensitive information from uninitialized locations in host OS kernel memory by not enabling memory and I/O decoding control bits. NOTE: this vulnerability exists because of an incomplete fix for CVE-2015-0777.
Virt-install(1) utility used to provision new virtual machines has introduced an option '--unattended' to create VMs without user interaction. This option accepts guest VM password as command line arguments, thus leaking them to others users on the system via process listing. It was introduced recently in the virt-manager v2.2.0 release.
fs/btrfs/inode.c in the Linux kernel before 4.3.3 mishandles compressed inline extents, which allows local users to obtain sensitive pre-truncation information from a file via a clone action.
The dgnc_mgmt_ioctl function in drivers/staging/dgnc/dgnc_mgmt.c in the Linux kernel through 4.3.3 does not initialize a certain structure member, which allows local users to obtain sensitive information from kernel memory via a crafted application.
The hso_get_count function in drivers/net/usb/hso.c in the Linux kernel before 2.6.36-rc5 does not properly initialize a certain structure member, which allows local users to obtain potentially sensitive information from kernel stack memory via a TIOCGICOUNT ioctl call.
Twiddle in Red Hat JBoss Enterprise Application Platform (aka JBoss EAP or JBEAP) 4.2 before 4.2.0.CP08 and 4.3 before 4.3.0.CP07 writes the JMX password, and other command-line arguments, to the twiddle.log file, which allows local users to obtain sensitive information by reading this file.
The sco_sock_bind function in net/bluetooth/sco.c in the Linux kernel before 4.3.4 does not verify an address length, which allows local users to obtain sensitive information from kernel memory and bypass the KASLR protection mechanism via a crafted application.
A flaw was found in Red Hat Satellite, which allows a privileged attacker to read OMAPI secrets through the ISC DHCP of Smart-Proxy. This flaw allows an attacker to gain control of DHCP records from the network. The highest threat from this vulnerability is to system availability.
In CISOfy Lynis 2.x through 2.7.5, the license key can be obtained by looking at the process list when a data upload is being performed. This license can be used to upload data to a central Lynis server. Although no data can be extracted by knowing the license key, it may be possible to upload the data of additional scans.
The service daemon in CRIU does not properly restrict access to non-dumpable processes, which allows local users to obtain sensitive information via (1) process dumps or (2) ptrace access.
libvirt before 2.2 includes Ceph credentials on the qemu command line when using RADOS Block Device (aka RBD), which allows local users to obtain sensitive information via a process listing.
In yast2-samba-provision up to and including version 1.0.1 the password for samba shares was provided on the command line to tools used by yast2-samba-provision, allowing local attackers to read them in the process list
An issue was discovered in the fd_locked_ioctl function in drivers/block/floppy.c in the Linux kernel through 4.15.7. The floppy driver will copy a kernel pointer to user memory in response to the FDGETPRM ioctl. An attacker can send the FDGETPRM ioctl and use the obtained kernel pointer to discover the location of kernel code and data and bypass kernel security protections such as KASLR.
The event scripts in Automatic Bug Reporting Tool (ABRT) uses world-readable permission on a copy of sosreport file in problem directories, which allows local users to obtain sensitive information from /var/log/messages via unspecified vectors.
arch/x86/kernel/paravirt.c in the Linux kernel before 4.18.1 mishandles certain indirect calls, which makes it easier for attackers to conduct Spectre-v2 attacks against paravirtual guests.
The HYPERVISOR_xen_version hypercall in Xen 3.2.x through 4.5.x does not properly initialize data structures, which allows local guest users to obtain sensitive information via unspecified vectors.
drivers/xen/usbback/usbback.c in linux-2.6.18-xen-3.4.0 (aka the Xen 3.4.x support patches for the Linux kernel 2.6.18), as used in the Linux kernel 2.6.x and 3.x in SUSE Linux distributions, allows guest OS users to obtain sensitive information from uninitialized locations in host OS kernel memory via unspecified vectors.
The simulate dbus method in aptdaemon before 1.1.1+bzr982-0ubuntu3.1 as packaged in Ubuntu 15.04, before 1.1.1+bzr980-0ubuntu1.1 as packaged in Ubuntu 14.10, before 1.1.1-1ubuntu5.2 as packaged in Ubuntu 14.04 LTS, before 0.43+bzr805-0ubuntu10 as packaged in Ubuntu 12.04 LTS allows local users to obtain sensitive information, or access files with root permissions.
The sched_read_attr function in kernel/sched/core.c in the Linux kernel 3.14-rc before 3.14-rc4 uses an incorrect size, which allows local users to obtain sensitive information from kernel stack memory via a crafted sched_getattr system call.
selinux-policy as packaged in Red Hat OpenShift 2 allows attackers to obtain process listing information via a privilege escalation attack.
IBM DB2 for Linux, UNIX and Windows (includes DB2 Connect Server) 9.7, 10.1, 10.5, and 11.1 contains a vulnerability in db2cacpy that could allow a local user to read any file on the system. IBM X-Force ID: 145502.
The __switch_to function in arch/x86/kernel/process_64.c in the Linux kernel through 3.18.1 does not ensure that Thread Local Storage (TLS) descriptors are loaded before proceeding with other steps, which makes it easier for local users to bypass the ASLR protection mechanism via a crafted application that reads a TLS base address.
The strutils.mask_password function in the OpenStack Oslo utility library, Cinder, Nova, and Trove before 2013.2.4 and 2014.1 before 2014.1.3 does not properly mask passwords when logging commands, which allows local users to obtain passwords by reading the log.
The processutils.execute function in OpenStack oslo-incubator, Cinder, Nova, and Trove before 2013.2.4 and 2014.1 before 2014.1.3 allows local users to obtain passwords from commands that cause a ProcessExecutionError by reading the log.
IBM DB2 10.5 before FP4 on Linux and AIX creates temporary files during CDE table LOAD operations, which allows local users to obtain sensitive information by reading a file while a LOAD is occurring.
Libgcrypt before 1.5.4, as used in GnuPG and other products, does not properly perform ciphertext normalization and ciphertext randomization, which makes it easier for physically proximate attackers to conduct key-extraction attacks by leveraging the ability to collect voltage data from exposed metal, a different vector than CVE-2013-4576.