A vulnerability classified as critical has been found in D-Link DIR-600L up to 2.07B01. This affects the function formSysCmd. The manipulation of the argument host leads to command injection. It is possible to initiate the attack remotely. This vulnerability only affects products that are no longer supported by the maintainer.

An authenticated command injection vulnerability exists in the AOS-CX command line interface. Successful exploitation of this vulnerability results in the ability to execute arbitrary commands on the underlying operating system as a privileged user on the affected switch. This allows an attacker to fully compromise the underlying operating system on the device running AOS-CX.

A vulnerability was found in TOTOLINK N150RT 3.4.0-B20190525. It has been rated as critical. This issue affects some unknown processing of the file /boafrm/formWsc. The manipulation of the argument localPin leads to command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used.

A vulnerability in the REST API and web UI of Cisco Nexus Dashboard Fabric Controller (NDFC) could allow an authenticated, low-privileged, remote attacker to perform a command injection attack against an affected device.   This vulnerability is due to improper user authorization and insufficient validation of command arguments. An attacker could exploit this vulnerability by submitting crafted commands to an affected REST API endpoint or through the web UI. A successful exploit could allow the attacker to execute arbitrary commands on the CLI of a Cisco NDFC-managed device with network-admin privileges.   Note: This vulnerability does not affect Cisco NDFC when it is configured for storage area network (SAN) controller deployment.

IBM Security Identity Manager Virtual Appliance 6.0 and 7.0 could allow a remote authenticated attacker to execute arbitrary commands on the system. By sending a specially-crafted request, an attacker could exploit this vulnerability to execute arbitrary commands on the system. IBM X-Force ID: 127394.

A vulnerability classified as critical was found in TOTOLINK T6 4.1.5cu.748. This vulnerability affects the function ckeckKeepAlive of the file wireless.so of the component MQTT Packet Handler. The manipulation leads to command injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used.

A vulnerability, which was classified as critical, has been found in TOTOLINK N200RE 9.3.5u.6095_B20200916/9.3.5u.6139_B20201216. Affected by this issue is the function sub_41A0F8 of the file /cgi-bin/cstecgi.cgi. The manipulation of the argument Hostname leads to os command injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used.

1Panel is an open source Linux server operation and maintenance management panel. Prior to version 1.3.6, an authenticated attacker can craft a malicious payload to achieve command injection when adding container repositories. The vulnerability has been fixed in v1.3.6.

Azure Identity SDK Remote Code Execution Vulnerability

1Panel is an open source Linux server operation and maintenance management panel. Prior to version 1.3.6, an authenticated attacker can craft a malicious payloads to achieve command injection when entering the container terminal. The vulnerability has been fixed in v1.3.6.

On Mitel 6869i 4.5.0.41 devices, the Manual Firmware Update (upgrade.html) page does not perform sanitization on the username and path parameters (sent by an authenticated user) before appending flags to the busybox ftpget command. This leads to $() command execution.

A vulnerability, which was classified as critical, has been found in Wifi-soft UniBox Controller up to 20250506. Affected by this issue is some unknown functionality of the file /billing/test_accesscodelogin.php. The manipulation of the argument Password leads to os command injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

jcvi is a Python library to facilitate genome assembly, annotation, and comparative genomics. A configuration injection happens when user input is considered by the application in an unsanitized format and can reach the configuration file. A malicious user may craft a special payload that may lead to a command injection. The impact of a configuration injection may vary. Under some conditions, it may lead to command injection if there is for instance shell code execution from the configuration file values. This vulnerability does not currently have a fix.

In Splunk Enterprise versions below 9.2.2, 9.1.5, and 9.0.10 and Splunk Cloud Platform versions below 9.1.2312.109 and 9.1.2308.207, an authenticated user could create an external lookup that calls a legacy internal function. The authenticated user could use this internal function to insert code into the Splunk platform installation directory. From there, the user could execute arbitrary code on the Splunk platform Instance.

Atos Unify OpenScape 4000 Assistant V10 R1 before V10 R1.42.0 and V10 R1.34.8, Assistant V10 R0, Manager V10 R1 before V10 R1.42.0 and V10 R1.34.8, and Manager V10 R0 allow command injection by authenticated users, aka OSFOURK-24036.

A vulnerability was found in Roxy-WI up to 8.1.3. It has been declared as critical. Affected by this vulnerability is the function action_service of the file app/modules/roxywi/roxy.py. The manipulation of the argument action/service leads to os command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. Upgrading to version 8.1.4 is able to address this issue. The identifier of the patch is 32313928eb9ce906887b8a30bf7b9a3d5c0de1be. It is recommended to upgrade the affected component.

Atos Unify OpenScape 4000 Assistant V10 R1 before V10 R1.42.0 and V10 R1.34.8, Assistant V10 R0, Manager V10 R1 before V10 R1.42.0 and V10 R1.34.8, and Manager V10 R0 allow command injection by authenticated users, aka OSFOURK-23556.

TP-Link TL-WR940N V2/V4, TL-WR841N V8/V10, and TL-WR740N V1/V2 was discovered to contain a command injection vulnerability via the component /userRpm/WlanNetworkRpm .

D-Link DIR-842V2 v1.0.3 was discovered to contain a command injection vulnerability via the iperf3 diagnostics function.

A command injection vulnerability in D-Link DIR-823X 240126 and 240802 allows an authorized attacker to execute arbitrary commands on remote devices by sending a POST request to /goform/set_prohibiting via the corresponding function, triggering remote command execution.

A vulnerability in the Smart Licensing Manager service of the Cisco Firepower 4100 Series Next-Generation Firewall (NGFW) and Firepower 9300 Security Appliance could allow an authenticated, remote attacker to inject arbitrary commands that could be executed with root privileges. The vulnerability is due to insufficient input validation of certain Smart Licensing configuration parameters. An authenticated attacker could exploit the vulnerability by configuring a malicious URL within the affected feature. A successful exploit could allow the attacker to execute arbitrary commands with root privileges. This vulnerability affects the following Cisco Firepower Security products running FX-OS code trains 1.1.3, 1.1.4, and 2.0.1 (versions 2.1.1, 2.2.1, and 2.2.2 are not affected): Firepower 4100 Series Next-Generation Firewall and Firepower 9300 Security Appliance. Cisco Bug IDs: CSCvb86863.

TN-5900 Series firmware versions v3.3 and prior are vulnerable to command-injection vulnerability. This vulnerability stems from insufficient input validation and improper authentication in the key-generation function, which could potentially allow malicious users to execute remote code on affected devices.

EDIMAX BR-6288ACL v1.12 was discovered to contain an authenticated remote code execution (RCE) vulnerability via the pppUserName parameter.

Netgear D6220 with Firmware Version 1.0.0.80, D8500 with Firmware Version 1.0.3.60, R6700 with Firmware Version 1.0.2.26, and R6900 with Firmware Version 1.0.2.26 are vulnerable to Command Injection. If an attacker gains web management privileges, they can inject commands into the post request parameters, gaining shell privileges.

A vulnerability was found in D-Link DCS-932L 2.18.01. It has been classified as critical. Affected is the function setSystemAdmin of the file /setSystemAdmin. The manipulation of the argument AdminID leads to os command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability was found in JFinalCMS 1.0. It has been rated as critical. Affected by this issue is the function update of the file \src\main\java\com\cms\controller\admin\TemplateController.java of the component Template Handler. The manipulation of the argument content leads to command injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used.

A vulnerability classified as critical has been found in Linksys RE6500, RE6250, RE6300, RE6350, RE7000 and RE9000 1.0.013.001/1.0.04.001/1.0.04.002/1.1.05.003/1.2.07.001. This affects the function NTP of the file /goform/NTP. The manipulation of the argument manual_year_select/manual_month_select/manual_day_select/manual_hour_select/manual_min_select/manual_sec_select leads to os command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was found in Linksys RE6500, RE6250, RE6300, RE6350, RE7000 and RE9000 1.0.013.001/1.0.04.001/1.0.04.002/1.1.05.003/1.2.07.001. It has been declared as critical. Affected by this vulnerability is the function WPS of the file /goform/WPS. The manipulation of the argument PIN leads to command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

There is a command injection vulnerability in the Tenda G103 Gigabit GPON Terminal with firmware version V1.0.0.5. If an attacker gains web management privileges, they can inject commands gaining shell privileges.

Mattermost versions 10.4.x <= 10.4.2, 10.3.x <= 10.3.3, 9.11.x <= 9.11.8 fail to restrict command execution in archived channels, which allows authenticated users to run commands in archived channels.

LuaTeX before 1.17.0 allows execution of arbitrary shell commands when compiling a TeX file obtained from an untrusted source. This occurs because luatex-core.lua lets the original io.popen be accessed. This also affects TeX Live before 2023 r66984 and MiKTeX before 23.5.

MXsecurity version 1.0 is vulnearble to command injection vulnerability. This vulnerability has been reported in the SSH CLI program, which can be exploited by attackers who have gained authorization privileges. The attackers can break out of the restricted shell and subsequently execute arbitrary code.

A vulnerability was found in Linksys RE6500, RE6250, RE6300, RE6350, RE7000 and RE9000 1.0.013.001/1.0.04.001/1.0.04.002/1.1.05.003/1.2.07.001. It has been rated as critical. Affected by this issue is the function verifyFacebookLike of the file /goform/verifyFacebookLike. The manipulation of the argument uid/accessToken leads to os command injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

TN-4900 Series firmware versions v1.2.4 and prior and TN-5900 Series firmware versions v3.3 and prior are vulnerable to the command injection vulnerability. This vulnerability stems from insufficient input validation in the key-generation function, which could potentially allow malicious users to execute remote code on affected devices.

Motorola CX2L Router 1.0.1 was discovered to contain a command injection vulnerability via the staticroute_list parameter.

Motorola CX2L Router 1.0.1 was discovered to contain a command injection vulnerability via the system_time_timezone parameter.

WWBN AVideo is an open source video platform. In versions 12.4 and prior, a command injection vulnerability exists at `plugin/CloneSite/cloneClient.json.php` which allows Remote Code Execution if you CloneSite Plugin. This is a bypass to the fix for CVE-2023-30854, which affects WWBN AVideo up to version 12.3. This issue is patched in commit 1df4af01f80d56ff2c4c43b89d0bac151e7fb6e3.

** UNSUPPORTED WHEN ASSIGNED ** The Apache Spark UI offers the possibility to enable ACLs via the configuration option spark.acls.enable. With an authentication filter, this checks whether a user has access permissions to view or modify the application. If ACLs are enabled, a code path in HttpSecurityFilter can allow someone to perform impersonation by providing an arbitrary user name. A malicious user might then be able to reach a permission check function that will ultimately build a Unix shell command based on their input, and execute it. This will result in arbitrary shell command execution as the user Spark is currently running as. This issue was disclosed earlier as CVE-2022-33891, but incorrectly claimed version 3.1.3 (which has since gone EOL) would not be affected. NOTE: This vulnerability only affects products that are no longer supported by the maintainer. Users are recommended to upgrade to a supported version of Apache Spark, such as version 3.4.0.

Motorola CX2L Router 1.0.1 was discovered to contain a command injection vulnerability via the smartqos_priority_devices parameter.

TP-Link TL-WPA4530 KIT V2 (EU)_170406 and V2 (EU)_161115 is vulnerable to Command Injection via _httpRpmPlcDeviceRemove.

A vulnerability was found in WeiYe-Jing datax-web 2.1.1. It has been classified as critical. This affects an unknown part of the file /api/job/add/. The manipulation of the argument glueSource leads to os command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used.

A code injection vulnerability exists in the Ambari Alert Definition feature, allowing authenticated users to inject and execute arbitrary shell commands. The vulnerability arises when defining alert scripts, where the script filename field is executed using `sh -c`. An attacker with authenticated access can exploit this vulnerability to inject malicious commands, leading to remote code execution on the server. The issue has been fixed in the latest versions of Ambari.

Cursor is a code editor built for programming with AI. In versions below 1.3, an attacker can bypass the allow list in auto-run mode with a backtick (`) or $(cmd). If a user has swapped Cursor from its default settings (requiring approval for every terminal call) to an allowlist, an attacker can execute arbitrary command execution outside of the allowlist without user approval. An attacker can trigger this vulnerability if chained with indirect prompt injection. This is fixed in version 1.3.

A vulnerability classified as critical was found in FLIR AX8 up to 1.46.16. This vulnerability affects the function setDataTime of the file \usr\www\application\models\settingsregional.php. The manipulation of the argument year/month/day/hour/minute leads to command injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

The `add_llm` function in `llm_app.py` in infiniflow/ragflow version 0.11.0 contains a remote code execution (RCE) vulnerability. The function uses user-supplied input `req['llm_factory']` and `req['llm_name']` to dynamically instantiate classes from various model dictionaries. This approach allows an attacker to potentially execute arbitrary code due to the lack of comprehensive input validation or sanitization. An attacker could provide a malicious value for 'llm_factory' that, when used as an index to these model dictionaries, results in the execution of arbitrary code.

An issue in tiagorlampert CHAOS v5.0.1 allows a remote attacker to execute arbitrary code via the BuildClient function within client_service.go

A condition exists in FlashArray and FlashBlade Purity whereby a malicious user could execute arbitrary commands remotely through a specifically crafted SNMP configuration.

Command injection vulnerability in RaspAP raspap-webgui 2.8.8 and earlier allows remote attackers to run arbitrary commands via crafted POST request to hostapd settings form.

A vulnerability was found in Totolink LR1200GB 9.1.0u.6619_B20230130. It has been rated as critical. This issue affects the function UploadFirmwareFile of the file /cgi-bin/cstecgi.cgi. The manipulation of the argument FileName leads to command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The identifier VDB-249857 was assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.