The web interface on Cisco IOS 12.3(8)JA and 12.3(8)JA1, as used on the Cisco Wireless Access Point and Wireless Bridge, reconfigures itself when it is changed to use the "Local User List Only (Individual Passwords)" setting, which removes all security and password configurations and allows remote attackers to access the system.
Cisco Wide Area Application Services (WAAS) 5.1.1 before 5.1.1e, when SharePoint prefetch optimization is enabled, allows remote SharePoint servers to execute arbitrary code via a malformed response, aka Bug ID CSCue18479.
HTTP server for Cisco IOS 11.3 to 12.2 allows attackers to bypass authentication and execute arbitrary commands, when local authorization is being used, by specifying a high access level in the URL.
Cisco IOS 12.0 to 12.4 might allow remote attackers to execute arbitrary code via a heap-based buffer overflow in system timers. NOTE: this issue does not correspond to a specific vulnerability, rather a general weakness that only increases the feasibility of exploitation of any vulnerabilities that might exist. Such design-level weaknesses normally are not included in CVE, so perhaps this issue should be REJECTed.
Multiple vulnerabilities in the web-based management interface of Cisco Small Business 220 Series Smart Switches could allow an attacker to do the following: Hijack a user session Execute arbitrary commands as a root user on the underlying operating system Conduct a cross-site scripting (XSS) attack Conduct an HTML injection attack For more information about these vulnerabilities, see the Details section of this advisory.
Cisco UCS Director (formerly Cloupia) before 4.0.0.3 has a hardcoded password for the root account, which makes it easier for remote attackers to obtain administrative access via an SSH session to the CLI interface, aka Bug ID CSCui73930.
A vulnerability in an API endpoint of Cisco ACI Multi-Site Orchestrator (MSO) installed on the Application Services Engine could allow an unauthenticated, remote attacker to bypass authentication on an affected device. The vulnerability is due to improper token validation on a specific API endpoint. An attacker could exploit this vulnerability by sending a crafted request to the affected API. A successful exploit could allow the attacker to receive a token with administrator-level privileges that could be used to authenticate to the API on affected MSO and managed Cisco Application Policy Infrastructure Controller (APIC) devices.
A vulnerability in the web-based management interface of Cisco Small Business RV320 and RV325 Dual Gigabit WAN VPN Routers could allow an unauthenticated, remote attacker to access administrative credentials. The vulnerability exists because affected devices use weak encryption algorithms for user credentials. An attacker could exploit this vulnerability by conducting a man-in-the-middle attack and decrypting intercepted credentials. A successful exploit could allow the attacker to gain access to an affected device with administrator privileges. This vulnerability affects Cisco Small Business RV320 and RV325 Dual Gigabit WAN VPN Routers running firmware releases prior to 1.4.2.22.
A vulnerability in the loading mechanism of specific dynamic link libraries in Cisco Jabber for Windows could allow an authenticated, local attacker to perform a DLL preloading attack. To exploit this vulnerability, the attacker would need to have valid credentials on the Windows system. The vulnerability is due to insufficient validation of the resources loaded by the application at run time. An attacker could exploit this vulnerability by crafting a malicious DLL file and placing it in a specific location on the targeted system. The malicious DLL file would execute when the Jabber application launches. A successful exploit could allow the attacker to execute arbitrary code on the target machine with the privileges of another user's account.
A vulnerability in the Transport Layer Security (TLS) certificate validation functionality of Cisco Nexus 9000 Series Application Centric Infrastructure (ACI) Mode Switch Software could allow an unauthenticated, remote attacker to perform insecure TLS client authentication on an affected device. The vulnerability is due to insufficient TLS client certificate validations for certificates sent between the various components of an ACI fabric. An attacker who has possession of a certificate that is trusted by the Cisco Manufacturing CA and the corresponding private key could exploit this vulnerability by presenting a valid certificate while attempting to connect to the targeted device. An exploit could allow the attacker to gain full control of all other components within the ACI fabric of an affected device.
The EAP-FAST authentication module in Cisco Secure Access Control Server (ACS) 4.x before 4.2.1.15.11, when a RADIUS server configuration is enabled, does not properly parse user identities, which allows remote attackers to execute arbitrary commands via crafted EAP-FAST packets, aka Bug ID CSCui57636.
Cisco Unified MeetingPlace Web Conferencing Server 7.x before 7.1MR1 Patch 2, 8.0 before 8.0MR1 Patch 2, and 8.5 before 8.5MR3 Patch 1, when the Remember Me option is used, does not properly verify cookies, which allows remote attackers to impersonate users via a crafted login request, aka Bug ID CSCuc64846.
The web interface in the Manager component in Cisco Unified Computing System (UCS) 1.x and 2.x before 2.0(2m) allows remote attackers to obtain sensitive information by reading a (1) technical-support bundle file or (2) on-device configuration backup, aka Bug ID CSCtq86543.
The login page in the Web Console in the Manager component in Cisco Unified Computing System (UCS) before 1.0(2h), 1.1 before 1.1(1j), and 1.3(x) allows remote attackers to bypass LDAP authentication via a malformed request, aka Bug ID CSCtc91207.
The helper application in Cisco AnyConnect Secure Mobility Client (formerly AnyConnect VPN Client) before 2.5.3041, and 3.0.x before 3.0.629, on Linux and Mac OS X downloads a client executable file (vpndownloader.exe) without verifying its authenticity, which allows remote attackers to execute arbitrary code via the url property to a Java applet, aka Bug ID CSCsy05934.
The Web Install ActiveX control (CSDWebInstaller) in Cisco Secure Desktop (CSD) before 3.5.841 does not properly verify the signatures of downloaded programs, which allows remote attackers to force the download and execution of arbitrary files via a crafted web page, aka Bug ID CSCta25876.
The WebLaunch feature in Cisco Secure Desktop before 3.6.6020 does not properly validate binaries that are received by the downloader process, which allows remote attackers to execute arbitrary code via vectors involving (1) ActiveX or (2) Java components, aka Bug IDs CSCtz76128 and CSCtz78204.
A vulnerability in the Cisco Small Business Switches software could allow an unauthenticated, remote attacker to bypass the user authentication mechanism of an affected device. The vulnerability exists because under specific circumstances, the affected software enables a privileged user account without notifying administrators of the system. An attacker could exploit this vulnerability by using this account to log in to an affected device and execute commands with full admin rights. Cisco has not released software updates that address this vulnerability. This advisory will be updated with fixed software information once fixed software becomes available. There is a workaround to address this vulnerability.
Cisco IOS 12.0 through 12.2, when IP routing is disabled, accepts false ICMP redirect messages, which allows remote attackers to cause a denial of service (network routing modification).
Unknown vulnerability in Cisco Catalyst 7.5(1) allows local users to bypass authentication and gain access to the enable mode without a password.
The VPN downloader implementation in the WebLaunch feature in Cisco AnyConnect Secure Mobility Client 2.x before 2.5 MR6 on Windows, and 2.x before 2.5 MR6 and 3.x before 3.0 MR8 on Mac OS X and Linux, does not properly validate binaries that are received by the downloader process, which allows remote attackers to execute arbitrary code via vectors involving (1) ActiveX or (2) Java components, aka Bug ID CSCtw47523.
Multiple vulnerabilities in Cisco Webex Network Recording Player for Microsoft Windows and Cisco Webex Player for Microsoft Windows could allow an attacker to execute arbitrary code on an affected system. The vulnerabilities are due to insufficient validation of certain elements within a Webex recording that is stored in either the Advanced Recording Format (ARF) or the Webex Recording Format (WRF). An attacker could exploit these vulnerabilities by sending a malicious ARF or WRF file to a user through a link or email attachment and persuading the user to open the file on the local system. A successful exploit could allow the attacker to execute arbitrary code on the affected system with the privileges of the targeted user.
A vulnerability in session management for the web-based interface of Cisco Small Business Smart and Managed Switches could allow an unauthenticated, remote attacker to defeat authentication protections and gain unauthorized access to the management interface. The attacker could obtain the privileges of the highjacked session account, which could include administrator privileges on the device. The vulnerability is due to the use of weak entropy generation for session identifier values. An attacker could exploit this vulnerability to determine a current session identifier through brute force and reuse that session identifier to take over an ongoing session. In this way, an attacker could take actions within the management interface with privileges up to the level of the administrative user.
Multiple vulnerabilities in Cisco Firepower Management Center (FMC) Software and Cisco Firepower User Agent Software could allow an attacker to access a sensitive part of an affected system with a high-privileged account. For more information about these vulnerabilities, see the Details section of this advisory.
Multiple vulnerabilities in Cisco Firepower Management Center (FMC) Software and Cisco Firepower User Agent Software could allow an attacker to access a sensitive part of an affected system with a high-privileged account. For more information about these vulnerabilities, see the Details section of this advisory.
A vulnerability in the sftunnel functionality of Cisco Firepower Management Center (FMC) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to obtain the device registration hash. The vulnerability is due to insufficient sftunnel negotiation protection during initial device registration. An attacker in a man-in-the-middle position could exploit this vulnerability by intercepting a specific flow of the sftunnel communication between an FMC device and an FTD device. A successful exploit could allow the attacker to decrypt and modify the sftunnel communication between FMC and FTD devices, allowing the attacker to modify configuration data sent from an FMC device to an FTD device or alert data sent from an FTD device to an FMC device.
A vulnerability in the application protocol handling features of Cisco Jabber for Windows could allow an unauthenticated, remote attacker to execute arbitrary commands. The vulnerability is due to improper handling of input to the application protocol handlers. An attacker could exploit this vulnerability by convincing a user to click a link within a message sent by email or other messaging platform. A successful exploit could allow the attacker to execute arbitrary commands on a targeted system with the privileges of the user account that is running the Cisco Jabber client software.
A vulnerability in the enhanced Preboot eXecution Environment (PXE) boot loader for Cisco IOS XR 64-bit Software could allow an unauthenticated, remote attacker to execute unsigned code during the PXE boot process on an affected device. The PXE boot loader is part of the BIOS and runs over the management interface of hardware platforms that are running Cisco IOS XR Software only. The vulnerability exists because internal commands that are issued when the PXE network boot process is loading a software image are not properly verified. An attacker could exploit this vulnerability by compromising the PXE boot server and replacing a valid software image with a malicious one. Alternatively, the attacker could impersonate the PXE boot server and send a PXE boot reply with a malicious file. A successful exploit could allow the attacker to execute unsigned code on the affected device. Note: To fix this vulnerability, both the Cisco IOS XR Software and the BIOS must be upgraded. The BIOS code is included in Cisco IOS XR Software but might require additional installation steps. For further information, see the Fixed Software section of this advisory.
Cisco AnyConnect Secure Mobility Client 3.1.x before 3.1.00495, and 3.2.x, does not check whether an HTTP request originally contains ScanSafe headers, which allows remote attackers to have an unspecified impact via a crafted request, aka Bug ID CSCua13166.
A vulnerability in the web portal of Cisco Enterprise NFV Infrastructure Software (NFVIS) could allow an unauthenticated, remote attacker to perform a command injection attack and execute arbitrary commands with root privileges. The vulnerability is due to insufficient input validation by the web portal framework. An attacker could exploit this vulnerability by providing malicious input during web portal authentication. A successful exploit could allow the attacker to execute arbitrary commands with root privileges on the underlying operating system.
A vulnerability in the Cisco Webex Teams client for Windows could allow an unauthenticated, remote attacker to execute arbitrary commands on an affected system. This vulnerability is due to improper restrictions on software logging features used by the application on Windows operating systems. An attacker could exploit this vulnerability by convincing a targeted user to visit a website designed to submit malicious input to the affected application. A successful exploit could allow the attacker to cause the application to modify files and execute arbitrary commands on the system with the privileges of the targeted user.
A vulnerability in the web-based management interface of Cisco Adaptive Security Appliance (ASA) Software could allow an unauthenticated, remote attacker to conduct a cross-site request forgery (CSRF) attack on an affected system. The vulnerability is due to insufficient CSRF protections for the web-based management interface on an affected device. An attacker could exploit this vulnerability by persuading a user of the interface to follow a malicious link. A successful exploit could allow the attacker to perform arbitrary actions with the privilege level of the affected user. If the user has administrative privileges, the attacker could alter the configuration of, extract information from, or reload an affected device.
A vulnerability in the REST API of Cisco Prime Infrastructure (PI) and Cisco Evolved Programmable Network Manager (EPNM) could allow an unauthenticated remote attacker to execute arbitrary code with root privileges on the underlying operating system. The vulnerability is due to insufficient input validation during the initial High Availability (HA) configuration and registration process of an affected device. An attacker could exploit this vulnerability by uploading a malicious file during the HA registration period. A successful exploit could allow the attacker to execute arbitrary code with root-level privileges on the underlying operating system. Note: This vulnerability can only be exploited during the HA registration period. See the Details section for more information.
A vulnerability in the Cisco Webex Teams client, formerly Cisco Spark, could allow an attacker to execute arbitrary commands on a targeted system. This vulnerability is due to unsafe search paths used by the application URI that is defined in Windows operating systems. An attacker could exploit this vulnerability by convincing a targeted user to follow a malicious link. Successful exploitation could cause the application to load libraries from the directory targeted by the URI link. The attacker could use this behavior to execute arbitrary commands on the system with the privileges of the targeted user if the attacker can place a crafted library in a directory that is accessible to the vulnerable system.
Cisco Wireless LAN Controller (WLC) devices with software 4.x, 5.x, 6.0, and 7.0 before 7.0.220.4, when CPU-based ACLs are enabled, allow remote attackers to read or modify the configuration via unspecified vectors, aka Bug ID CSCtu56709.
Cisco IOS 12.0, 15.0, and 15.1, when a Policy Feature Card 3C (PFC3C) is used, does not create a fragment entry during processing of an ICMPv6 ACL, which has unspecified impact and remote attack vectors, aka Bug ID CSCtj90091.
Cross-site request forgery (CSRF) vulnerability in the Services Ready Platform Configuration Utility web interface on the Cisco Small Business SRP521W, SRP526W, and SRP527W with firmware before 1.1.24 and the Small Business SRP541W, SRP546W, and SRP547W with firmware before 1.2.1 allows remote attackers to hijack the authentication of administrators for requests that execute arbitrary commands, aka Bug ID CSCtr45124.
A vulnerability in the Cisco Webex Network Recording Player for Microsoft Windows and the Cisco Webex Player for Microsoft Windows could allow an attacker to execute arbitrary code on an affected system. The vulnerability exist because the affected software improperly validates Advanced Recording Format (ARF) and Webex Recording Format (WRF) files. An attacker could exploit this vulnerability by sending a user a malicious ARF or WRF file via a link or an email attachment and persuading the user to open the file by using the affected software. A successful exploit could allow the attacker to execute arbitrary code on the affected system.
A vulnerability in the Cisco Webex Network Recording Player for Microsoft Windows and the Cisco Webex Player for Microsoft Windows could allow an attacker to execute arbitrary code on an affected system. The vulnerability exist because the affected software improperly validates Advanced Recording Format (ARF) and Webex Recording Format (WRF) files. An attacker could exploit this vulnerability by sending a user a malicious ARF or WRF file via a link or an email attachment and persuading the user to open the file by using the affected software. A successful exploit could allow the attacker to execute arbitrary code on the affected system.
A vulnerability in the Cisco Webex Network Recording Player for Microsoft Windows and the Cisco Webex Player for Microsoft Windows could allow an attacker to execute arbitrary code on an affected system. The vulnerability exist because the affected software improperly validates Advanced Recording Format (ARF) and Webex Recording Format (WRF) files. An attacker could exploit this vulnerability by sending a user a malicious ARF or WRF file via a link or an email attachment and persuading the user to open the file by using the affected software. A successful exploit could allow the attacker to execute arbitrary code on the affected system.
A vulnerability in the Cisco Webex Network Recording Player for Microsoft Windows and the Cisco Webex Player for Microsoft Windows could allow an attacker to execute arbitrary code on an affected system. The vulnerability exist because the affected software improperly validates Advanced Recording Format (ARF) and Webex Recording Format (WRF) files. An attacker could exploit this vulnerability by sending a user a malicious ARF or WRF file via a link or an email attachment and persuading the user to open the file by using the affected software. A successful exploit could allow the attacker to execute arbitrary code on the affected system.
Multiple vulnerabilities in Cisco Enterprise NFV Infrastructure Software (NFVIS) could allow an attacker to escape from the guest virtual machine (VM) to the host machine, inject commands that execute at the root level, or leak system data from the host to the VM. For more information about these vulnerabilities, see the Details section of this advisory.
A vulnerability in the authentication functionality of Cisco Wireless LAN Controller (WLC) Software could allow an unauthenticated, remote attacker to bypass authentication controls and log in to the device through the management interface This vulnerability is due to the improper implementation of the password validation algorithm. An attacker could exploit this vulnerability by logging in to an affected device with crafted credentials. A successful exploit could allow the attacker to bypass authentication and log in to the device as an administrator. The attacker could obtain privileges that are the same level as an administrative user but it depends on the crafted credentials. Note: This vulnerability exists because of a non-default device configuration that must be present for it to be exploitable. For details about the vulnerable configuration, see the Vulnerable Products section of this advisory.
Multiple vulnerabilities in Cisco Small Business RV160, RV260, RV340, and RV345 Series Routers could allow an attacker to do any of the following: Execute arbitrary code Elevate privileges Execute arbitrary commands Bypass authentication and authorization protections Fetch and run unsigned software Cause denial of service (DoS) For more information about these vulnerabilities, see the Details section of this advisory.
A vulnerability in the Cisco Webex Network Recording Player for Microsoft Windows and the Cisco Webex Player for Microsoft Windows could allow an attacker to execute arbitrary code on an affected system. The vulnerability exist because the affected software improperly validates Advanced Recording Format (ARF) and Webex Recording Format (WRF) files. An attacker could exploit this vulnerability by sending a user a malicious ARF or WRF file via a link or an email attachment and persuading the user to open the file by using the affected software. A successful exploit could allow the attacker to execute arbitrary code on the affected system.
A vulnerability in the Cisco Webex Network Recording Player for Microsoft Windows and the Cisco Webex Player for Microsoft Windows could allow an attacker to execute arbitrary code on an affected system. The vulnerability exist because the affected software improperly validates Advanced Recording Format (ARF) and Webex Recording Format (WRF) files. An attacker could exploit this vulnerability by sending a user a malicious ARF or WRF file via a link or an email attachment and persuading the user to open the file by using the affected software. A successful exploit could allow the attacker to execute arbitrary code on the affected system.
A vulnerability in the Cisco Webex Network Recording Player for Microsoft Windows and the Cisco Webex Player for Microsoft Windows could allow an attacker to execute arbitrary code on an affected system. The vulnerability exist because the affected software improperly validates Advanced Recording Format (ARF) and Webex Recording Format (WRF) files. An attacker could exploit this vulnerability by sending a user a malicious ARF or WRF file via a link or an email attachment and persuading the user to open the file by using the affected software. A successful exploit could allow the attacker to execute arbitrary code on the affected system.
A vulnerability in the Cisco Webex Network Recording Player for Microsoft Windows and the Cisco Webex Player for Microsoft Windows could allow an attacker to execute arbitrary code on an affected system. The vulnerability exist because the affected software improperly validates Advanced Recording Format (ARF) and Webex Recording Format (WRF) files. An attacker could exploit this vulnerability by sending a user a malicious ARF or WRF file via a link or an email attachment and persuading the user to open the file by using the affected software. A successful exploit could allow the attacker to execute arbitrary code on the affected system.
A vulnerability in the Cisco Webex Network Recording Player for Microsoft Windows and the Cisco Webex Player for Microsoft Windows could allow an attacker to execute arbitrary code on an affected system. The vulnerability exist because the affected software improperly validates Advanced Recording Format (ARF) and Webex Recording Format (WRF) files. An attacker could exploit this vulnerability by sending a user a malicious ARF or WRF file via a link or an email attachment and persuading the user to open the file by using the affected software. A successful exploit could allow the attacker to execute arbitrary code on the affected system.
A vulnerability in the Cisco Webex Network Recording Player for Microsoft Windows and the Cisco Webex Player for Microsoft Windows could allow an attacker to execute arbitrary code on an affected system. The vulnerability exist because the affected software improperly validates Advanced Recording Format (ARF) and Webex Recording Format (WRF) files. An attacker could exploit this vulnerability by sending a user a malicious ARF or WRF file via a link or an email attachment and persuading the user to open the file by using the affected software. A successful exploit could allow the attacker to execute arbitrary code on the affected system.