A vulnerability in the Start Before Logon (SBL) module of Cisco AnyConnect Secure Mobility Client Software for Windows could allow an unauthenticated, local attacker to open Internet Explorer with the privileges of the SYSTEM user. The vulnerability is due to insufficient implementation of the access controls. An attacker could exploit this vulnerability by opening the Internet Explorer browser. An exploit could allow the attacker to use Internet Explorer with the privileges of the SYSTEM user. This may allow the attacker to execute privileged commands on the targeted system. This vulnerability affects versions prior to released versions 4.4.00243 and later and 4.3.05017 and later. Cisco Bug IDs: CSCvc43976.

A vulnerability in the web-based GUI of Cisco UCS Director 6.0.0.0 and 6.0.0.1 could allow an authenticated, local attacker to execute arbitrary workflow items with just an end-user profile, a Privilege Escalation Vulnerability. The vulnerability is due to improper role-based access control (RBAC) after the Developer Menu is enabled in Cisco UCS Director. An attacker could exploit this vulnerability by enabling Developer Mode for his/her user profile with an end-user profile and then adding new catalogs with arbitrary workflow items to his/her profile. An exploit could allow an attacker to perform any actions defined by these workflow items, including actions affecting other tenants. Cisco Bug IDs: CSCvb64765.

Cisco Unified IP Phones 9900 series devices with firmware 9.1 and 9.2 do not properly handle downloads of configuration information to an RT phone, which allows local users to gain privileges via unspecified injected data, aka Bug ID CSCts32237.

A vulnerability in the CLI of Cisco Firepower Extensible Operating System (FXOS) and NX-OS System Software could allow an authenticated, local attacker to perform a command injection attack. The vulnerability is due to insufficient input validation of command arguments to the CLI parser. An attacker could exploit this vulnerability by injecting crafted command arguments into a vulnerable CLI command. An exploit could allow the attacker to execute arbitrary commands at the user's privilege level. On products that support multiple virtual device contexts (VDCs), this vulnerability could allow the attacker to execute commands at the user's privilege level outside the user's environment. This vulnerability affects the following products running Cisco FXOS or NX-OS System Software: Firepower 4100 Series Next-Generation Firewall, Firepower 9300 Security Appliance, Multilayer Director Switches, Nexus 1000V Series Switches, Nexus 2000 Series Fabric Extenders, Nexus 3000 Series Switches, Nexus 3500 Platform Switches, Nexus 5000 Series Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Nexus 9000 Series Switches in standalone NX-OS mode, Nexus 9500 R-Series Line Cards and Fabric Modules, Unified Computing System Manager. Cisco Bug IDs: CSCve51700, CSCve93833, CSCve93860, CSCve93863, CSCve93864, CSCve93880.

A vulnerability in the restricted shell of the Cisco Identity Services Engine (ISE) that is accessible via SSH could allow an authenticated, local attacker to run arbitrary CLI commands with elevated privileges. The vulnerability is due to incomplete input validation of the user input for CLI commands issued at the restricted shell. An attacker could exploit this vulnerability by authenticating to the targeted device and executing commands that could lead to elevated privileges. An attacker would need valid user credentials to the device to exploit this vulnerability. The vulnerability affects the following Cisco Identity Services Engine (ISE) products running Release 1.4, 2.0, 2.0.1, 2.1.0: ISE, ISE Express, ISE Virtual Appliance. Cisco Bug IDs: CSCve74916.

A vulnerability in Cisco NX-OS System Software could allow an authenticated, local attacker to bypass signature verification when loading a software image. The vulnerability is due to insufficient NX-OS signature verification for software images. An authenticated, local attacker could exploit this vulnerability to bypass signature verification and load a crafted, unsigned software image on a targeted device. The attacker would need valid administrator credentials to perform this exploit. This vulnerability affects the following products running Cisco NX-OS System Software: Multilayer Director Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Unified Computing System Manager. Cisco Bug IDs: CSCvf25045, CSCvf31495.

A vulnerability in the CLI of Cisco NX-OS System Software could allow an authenticated, local attacker to perform a command injection attack. The vulnerability is due to insufficient input validation of command arguments to the CLI parser. An attacker could exploit this vulnerability by injecting crafted command arguments into a vulnerable CLI command. An exploit could allow the attacker to execute arbitrary commands at the user's privilege level. On products that support multiple virtual device contexts (VDCs), this vulnerability could allow the attacker to execute commands at the user's privilege level outside the user's environment. This vulnerability affects the following products running Cisco NX-OS System Software: Multilayer Director Switches, Nexus 2000 Series Fabric Extenders, Nexus 3000 Series Switches, Nexus 5000 Series Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Nexus 9000 Series Fabric Switches in Application Centric Infrastructure (ACI) mode, Nexus 9000 Series Switches in standalone NX-OS mode, and Nexus 9500 R-Series Line Cards and Fabric Modules. Cisco Bug IDs: CSCve99925, CSCvf15164, CSCvf15167, CSCvf15170, CSCvf15173.

A vulnerability in Cisco NX-OS System Software running on Cisco MDS Multilayer Director Switches, Cisco Nexus 7000 Series Switches, and Cisco Nexus 7700 Series Switches could allow an authenticated, local attacker to access the Bash shell of an affected device's operating system, even if the Bash shell is disabled on the system. The vulnerability is due to insufficient sanitization of user-supplied parameters that are passed to certain functions of the Python scripting sandbox of the affected system. An attacker could exploit this vulnerability to escape the scripting sandbox and enter the Bash shell of the operating system with the privileges of the authenticated user for the affected system. To exploit this vulnerability, the attacker must have local access to the affected system and be authenticated to the affected system with administrative or Python execution privileges. Cisco Bug IDs: CSCvd86513.

A vulnerability in the Cisco FindIT Network Discovery Utility could allow an authenticated, local attacker to perform a DLL preloading attack, potentially causing a partial impact to device availability, confidentiality, and integrity. The vulnerability is due to the application loading a malicious copy of a specific, nondefined DLL file instead of the DLL file it was expecting. An attacker could exploit this vulnerability by placing an affected DLL within the search path of the host system. An exploit could allow the attacker to load a malicious DLL file into the system, thus partially compromising confidentiality, integrity, and availability on the device. Cisco Bug IDs: CSCve89785.

A vulnerability in the Cisco Unified Computing System (UCS) Manager, Cisco Firepower 4100 Series Next-Generation Firewall (NGFW), and Cisco Firepower 9300 Security Appliance could allow an authenticated, local attacker to obtain root shell privileges on the device, aka Command Injection. The vulnerability is due to improper validation of string input in the shell application. An attacker could exploit this vulnerability through the use of malicious commands. A successful exploit could allow the attacker to obtain root shell privileges on the device. Cisco Bug IDs: CSCvf20741, CSCvf60078.

A vulnerability in the CLI of Cisco NX-OS System Software could allow an authenticated, local attacker to perform a command injection attack. The vulnerability is due to insufficient input validation of command arguments to the CLI parser. An attacker could exploit this vulnerability by injecting crafted command arguments into a vulnerable CLI command and gaining unauthorized access to the underlying operating system of the device. An exploit could allow the attacker to execute arbitrary commands at the user's privilege level. On products that support multiple virtual device contexts (VDCs), this vulnerability could allow an attacker to execute commands at the user's privilege level outside the user's environment. This vulnerability affects the following products running Cisco NX-OS System Software: Multilayer Director Switches, Nexus 2000 Series Fabric Extenders, Nexus 3000 Series Switches, Nexus 5000 Series Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Nexus 9000 Series Switches in standalone NX-OS mode, Nexus 9500 R-Series Line Cards and Fabric Modules. Cisco Bug IDs: CSCve99902, CSCvf14879.

A vulnerability in the TCL scripting subsystem of Cisco NX-OS System Software could allow an authenticated, local attacker to escape the interactive TCL shell and gain unauthorized access to the underlying operating system of the device. The vulnerability exists due to insufficient input validation of user-supplied files passed to the interactive TCL shell of the affected device. An attacker could exploit this vulnerability to escape the scripting sandbox and execute arbitrary commands on the underlying operating system with the privileges of the authenticated user. To exploit this vulnerability, an attacker must have local access and be authenticated to the targeted device with administrative or tclsh execution privileges. This vulnerability affects the following products running Cisco NX-OS System Software: Multilayer Director Switches, Nexus 2000 Series Fabric Extenders, Nexus 3000 Series Switches, Nexus 3500 Platform Switches, Nexus 5000 Series Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Nexus 9000 Series Switches in standalone NX-OS mode, Nexus 9500 R-Series Line Cards and Fabric Modules, Unified Computing System Manager. Cisco Bug IDs: CSCve93750, CSCve93762, CSCve93763, CSCvg04127.

A vulnerability in the Open Agent Container (OAC) feature of Cisco Nexus Series Switches could allow an unauthenticated, local attacker to read and send packets outside the scope of the OAC. The vulnerability is due to insufficient internal security measures in the OAC feature. An attacker could exploit this vulnerability by crafting specific packets for communication on the device-internal network. A successful exploit could allow the attacker to run code on the underlying host operating system. OAC is not enabled by default. For a device to be vulnerable, an administrator would need to install and activate this feature. This vulnerability affects the following Cisco Nexus Series Switches: Nexus 2000 Series Fabric Extenders, Nexus 5000 Series Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches. Cisco Bug IDs: CSCve53542, CSCvf36621.

A vulnerability in the routine that loads DLL files in Cisco Meeting App for Windows could allow an authenticated, local attacker to run an executable file with privileges equivalent to those of Cisco Meeting App. The vulnerability is due to incomplete input validation of the path name for DLL files before they are loaded. An attacker could exploit this vulnerability by installing a crafted DLL file in a specific system directory. A successful exploit could allow the attacker to execute commands on the underlying Microsoft Windows host with privileges equivalent to those of Cisco Meeting App. The attacker would need valid user credentials to exploit this vulnerability. Cisco Bug IDs: CSCvd77907.

The Cisco AMP For Endpoints application allows an authenticated, local attacker to access a static key value stored in the local application software. The vulnerability is due to the use of a static key value stored in the application used to encrypt the connector protection password. An attacker could exploit this vulnerability by gaining local, administrative access to a Windows host and stopping the Cisco AMP for Endpoints service. Cisco Bug IDs: CSCvg42904.

A vulnerability in the CLI of Cisco NX-OS System Software could allow an authenticated, local attacker to perform a command injection attack. The vulnerability is due to insufficient input validation of command arguments. An attacker could exploit this vulnerability by injecting crafted command arguments into a vulnerable CLI command and gain unauthorized access to the underlying operating system of the device. An exploit could allow the attacker to execute arbitrary commands at the user's privilege level. On products that support multiple virtual device contexts (VDCs), this vulnerability could allow an attacker to execute commands at the user's privilege level outside the user's environment. This vulnerability affects the following products running Cisco NX-OS System Software: Multilayer Director Switches, Nexus 2000 Series Fabric Extenders, Nexus 3000 Series Switches, Nexus 5000 Series Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Nexus 9000 Series Switches in standalone NX-OS mode, Nexus 9500 R-Series Line Cards and Fabric Modules, Unified Computing System Manager. Cisco Bug IDs: CSCvf14923, CSCvf14926, CSCvg04095.

A vulnerability in the Cisco FindIT Network Discovery Utility could allow an authenticated, local attacker to perform a DLL preloading attack, potentially causing a partial impact to the device availability, confidentiality, and integrity, aka Insecure Library Loading. The vulnerability is due to the application loading a malicious copy of a specific, nondefined DLL file instead of the DLL file it was expecting. An attacker could exploit this vulnerability by placing an affected DLL within the search path of the host system. An exploit could allow the attacker to load a malicious DLL file into the system, thus partially compromising confidentiality, integrity, and availability on the device. Cisco Bug IDs: CSCvf37955.

A vulnerability in the guest shell feature of Cisco NX-OS System Software could allow an authenticated, local attacker to read and send packets outside the scope of the guest shell container. An attacker would need valid administrator credentials to perform this attack. The vulnerability is due to insufficient internal security measures in the guest shell feature. An attacker could exploit this vulnerability by sending or receiving packets on the device-internal network outside of the guest shell container, aka "Unauthorized Internal Interface Access." This vulnerability affects the following products running Cisco NX-OS System Software: Nexus 3000 Series Switches, Nexus 9000 Series Switches in standalone NX-OS mode, Nexus 9500 R-Series Line Cards and Fabric Modules. Cisco Bug IDs: CSCvf33038.

A vulnerability in Cisco AnyConnect Secure Mobility Client for Windows could allow an authenticated, local attacker to install and execute an arbitrary executable file with privileges equivalent to the Microsoft Windows operating system SYSTEM account. More Information: CSCvb68043. Known Affected Releases: 4.3(2039) 4.3(748). Known Fixed Releases: 4.3(4019) 4.4(225).

A vulnerability in Cisco IOS XR Software could allow an authenticated, local attacker to log in to the device with the privileges of the root user. More Information: CSCva38434. Known Affected Releases: 6.1.1.BASE.

Cisco Aironet Access Point Software 8.2(100.0) on 1830e, 1830i, 1850e, 1850i, 2800, and 3800 access points allows local users to obtain Linux root access via crafted CLI command parameters, aka Bug ID CSCuy64037.

The CLI command parser on Cisco RV110W, RV130W, and RV215W devices allows local users to execute arbitrary shell commands as an administrator via crafted parameters, aka Bug IDs CSCuv90134, CSCux58161, and CSCux73567.

A vulnerability in the installation procedure of the Cisco Hybrid Media Service could allow an authenticated, local attacker to elevate privileges to the root level. More Information: CSCvb81344. Known Affected Releases: 1.0.

The default configuration of Cisco Unity 2.x and 3.x does not block international operator calls in the predefined restriction tables, which could allow authenticated users to place international calls using call forwarding.

Cisco AnyConnect Secure Mobility Client before 4.2.05015 and 4.3.x before 4.3.02039 mishandles pathnames, which allows local users to gain privileges via a crafted INF file, aka Bug ID CSCuz92464.

tac_plus Tacacs+ daemon F4.0.4.alpha, originally maintained by Cisco, creates files from the accounting directive with world-readable and writable permissions, which allows local users to access and modify sensitive files.

The installation procedure on Cisco Application Policy Infrastructure Controller (APIC) devices 1.3(2f) mishandles binary files, which allows local users to obtain root access via unspecified vectors, aka Bug ID CSCva50496.

The TrustZone implementation in certain Broadcom MediaxChange firmware could allow an unauthenticated, physically proximate attacker to achieve arbitrary code execution in the TrustZone Trusted Execution Environment (TEE) of an affected device. This, for example, affects certain Cisco IP Phone and Wireless IP Phone products before 2021-07-07. Exploitation is possible only when the attacker can disassemble the device in order to control the voltage/current for chip pins.

Cisco SN 5420 Storage Router 1.1(3) and earlier allows local users to access a developer's shell without a password and execute certain restricted commands without being logged.

A vulnerability in the command-line interface of the Cisco IP Interoperability and Collaboration System (IPICS) could allow an authenticated, local attacker to elevate the privilege level associated with their session. More Information: CSCva38636. Known Affected Releases: 4.10(1). Known Fixed Releases: 5.0(1).

Cisco Catalyst 5.4.x allows a user to gain access to the "enable" mode without a password.

Cisco Firepower Management Center 6.0.1 has hardcoded database credentials, which allows local users to obtain sensitive information by leveraging CLI access, aka Bug ID CSCva30370.

Cisco IOS XR 6.1.1 allows local users to execute arbitrary OS commands as root by leveraging admin privileges, aka Bug ID CSCva38349.

Cisco Aironet 1800, 2800, and 3800 devices with software before 8.2.110.0, 8.2.12x before 8.2.121.0, and 8.3.x before 8.3.102.0 allow local users to gain privileges via crafted CLI parameters, aka Bug ID CSCuz24725.

UCS Manager and UCS 6200 Fabric Interconnects in Cisco Unified Computing System (UCS) through 3.0(2d) allow local users to obtain OS root access via crafted CLI input, aka Bug ID CSCuz91263.

iox in Cisco IOS, possibly 15.6 and earlier, and IOS XE, possibly 3.18 and earlier, allows local users to execute arbitrary IOx Linux commands on the guest OS via crafted iox command-line options, aka Bug ID CSCuz59223.

A vulnerability in a specific CLI command within the local management (local-mgmt) context for Cisco UCS Fabric Interconnect Software could allow an authenticated, local attacker to gain elevated privileges as the root user on an affected device. The vulnerability is due to extraneous subcommand options present for a specific CLI command within the local-mgmt context. An attacker could exploit this vulnerability by authenticating to an affected device, entering the local-mgmt context, and issuing a specific CLI command and submitting user input. A successful exploit could allow the attacker to execute arbitrary operating system commands as root on an affected device. The attacker would need to have valid user credentials for the device.

A vulnerability in Cisco Enterprise NFV Infrastructure Software (NFVIS) could allow an authenticated, local attacker to execute arbitrary commands on the underlying operating system (OS) of an affected device as root. The vulnerability is due to insufficient input validation of a configuration file that is accessible to a local shell user. An attacker could exploit this vulnerability by including malicious input during the execution of this file. A successful exploit could allow the attacker to execute arbitrary commands on the underlying OS as root.

A vulnerability in the CLI of Cisco Enterprise NFV Infrastructure Software (NFVIS) could allow an authenticated, local attacker to overwrite or read arbitrary files. The attacker would need valid administrator privilege-level credentials. This vulnerability is due to improper input validation of CLI command arguments. An attacker could exploit this vulnerability by using directory traversal techniques when executing a vulnerable command. A successful exploit could allow the attacker to overwrite or read arbitrary files on an affected device.

A vulnerability in the CLI of Cisco Unified Communications Domain Manager (Cisco Unified CDM) Software could allow an authenticated, local attacker to escape the restricted shell. The vulnerability is due to insufficient input validation of shell commands. An attacker could exploit this vulnerability by executing crafted commands in the shell. A successful exploit could allow the attacker to escape the restricted shell and access commands in the context of the restricted shell user, which does not have root privileges.

A vulnerability in the CLI of Cisco Firepower Threat Defense (FTD) Software could allow an authenticated, local attacker to perform a command injection attack. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by injecting commands into arguments for a specific command. A successful exploit could allow the attacker to execute commands with root privileges.

A vulnerability in the Image Signature Verification feature of Cisco NX-OS Software could allow an authenticated, local attacker with administrator-level credentials to install a malicious software patch on an affected device. The vulnerability is due to improper verification of digital signatures for patch images. An attacker could exploit this vulnerability by crafting an unsigned software patch to bypass signature checks and loading it on an affected device. A successful exploit could allow the attacker to boot a malicious software patch image.

A vulnerability in the CLI of Cisco Firepower Threat Defense (FTD) Software could allow an authenticated, local attacker to perform a command injection attack. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by injecting commands into arguments for a specific command. A successful exploit could allow the attacker to execute commands with root privileges.

A vulnerability in the CLI of Cisco NX-OS Software could allow an authenticated, local attacker to access internal services that should be restricted on an affected device, such as the NX-API. The vulnerability is due to insufficient validation of arguments passed to a certain CLI command. An attacker could exploit this vulnerability by including malicious input as the argument to the affected command. A successful exploit could allow the attacker to bypass intended restrictions and access internal services of the device. An attacker would need valid device credentials to exploit this vulnerability.

A vulnerability in the Image Signature Verification feature used in an NX-OS CLI command in Cisco Nexus 3000 Series and 9000 Series Switches could allow an authenticated, local attacker with administrator-level credentials to install a malicious software image on an affected device. The vulnerability exists because software digital signatures are not properly verified during CLI command execution. An attacker could exploit this vulnerability to install an unsigned software image on an affected device. Note: If the device has not been patched for the vulnerability previously disclosed in the Cisco Security Advisory cisco-sa-20190306-nxos-sig-verif, a successful exploit could allow the attacker to boot a malicious software image.

A vulnerability in the filesystem management for the Cisco Nexus 9000 Series Application Centric Infrastructure (ACI) Mode Switch Software could allow an authenticated, local attacker with administrator rights to gain elevated privileges as the root user on an affected device. The vulnerability is due to overly permissive file permissions of specific system files. An attacker could exploit this vulnerability by authenticating to an affected device, creating a crafted command string, and writing this crafted string to a specific file location. A successful exploit could allow the attacker to execute arbitrary operating system commands as root on an affected device. The attacker would need to have valid administrator credentials for the device.

A vulnerability in the development shell (devshell) authentication for Cisco Aironet Series Access Points (APs) running the Cisco AP-COS operating system could allow an authenticated, local attacker to access the development shell without proper authentication, which allows for root access to the underlying Linux OS. The attacker would need valid device credentials. The vulnerability exists because the software improperly validates user-supplied input at the CLI authentication prompt for development shell access. An attacker could exploit this vulnerability by authenticating to the device and entering crafted input at the CLI. A successful exploit could allow the attacker to access the AP development shell without proper authentication, which allows for root access to the underlying Linux OS. Software versions prior to 8.3.150.0, 8.5.135.0, and 8.8.100.0 are affected.

Cisco Secure Desktop (CSD) before 3.1.1.45 allows local users to escape out of the secure desktop environment by using certain applications that switch to the default desktop, aka "System Policy Evasion".

A vulnerability in the Bash shell implementation for Cisco NX-OS Software could allow an authenticated, local attacker to escalate their privilege level by executing commands authorized to other user roles. The attacker must authenticate with valid user credentials. The vulnerability is due to the incorrect implementation of a Bash shell command that allows role-based access control (RBAC) to be bypassed. An attacker could exploit this vulnerability by authenticating to the device and entering a crafted command at the Bash prompt. A successful exploit could allow the attacker to escalate their privilege level by executing commands that should be restricted to other roles. For example, a dev-ops user could escalate their privilege level to admin with a successful exploit of this vulnerability.

A vulnerability in the CLI of Cisco NX-OS Software could allow an authenticated, local attacker to execute arbitrary commands on the underlying operating system of an affected device. The vulnerability is due to insufficient validation of arguments passed to certain CLI commands. An attacker could exploit this vulnerability by including malicious input as the argument of an affected command. A successful exploit could allow the attacker to execute arbitrary commands on the underlying operating system with elevated privileges. An attacker would need valid administrator credentials to exploit this vulnerability. MDS 9000 Series Multilayer Switches are affected running software versions prior to 6.2(27) and 8.2(3). Nexus 3000 Series Switches are affected running software versions prior to 7.0(3)I4(9) and 7.0(3)I7(6). Nexus 3500 Platform Switches are affected running software versions prior to 6.0(2)A8(11) and 7.0(3)I7(6). Nexus 3600 Platform Switches are affected running software versions prior to 7.0(3)F3(5). Nexus 9000 Series Switches in Standalone NX-OS Mode are affected running software versions prior to 7.0(3)I4(9), 7.0(3)I7(6). Nexus 9500 R-Series Line Cards and Fabric Modules are affected running software versions prior to 7.0(3)F3(5). Nexus 7000 and 7700 Series Switches are affected running software versions prior to 6.2(22) and 8.2(3).