A vulnerability in the web-based management interface of Bosch PRAESIDEO until and including version 4.41 and Bosch PRAESENSA until and including version 1.10 allows an unauthenticated remote attacker to trigger actions on an affected system on behalf of another user (Cross-Site Request Forgery). This requires the victim to be tricked into clicking a malicious link or submitting a malicious form. A successful exploit allows the attacker to perform arbitrary actions with the privileges of the victim, e.g. creating and modifying user accounts, changing system configuration settings and cause DoS conditions. Note: For Bosch PRAESIDEO 4.31 and newer and Bosch PRAESENSA in all versions, the confidentiality impact is considered low because user credentials are not shown in the web interface.
A vulnerability classified as problematic was found in TrueConf Server 4.3.7. This vulnerability affects unknown code of the file /admin/service/stop/. The manipulation leads to cross-site request forgery. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used.
Cross-site request forgery (CSRF) vulnerability in TS-WPTCAM, TS-PTCAM, TS-PTCAM/POE, TS-WLC2, TS-WLCE, TS-WRLC firmware version 1.19 and earlier and TS-WPTCAM2 firmware version 1.01 and earlier allows remote attackers to hijack the authentication of administrators via unspecified vectors.
Certain NETGEAR devices are affected by CSRF. This affects R6100 before 1.0.1.12, R7500 before 1.0.0.108, WNDR3700v4 before 1.0.2.86, WNDR4300v1 before 1.0.2.88, WNDR4300v2 before 1.0.0.48, WNDR4500v3 before 1.0.0.48, and WNR2000v5 before 1.0.0.42.
A Cross-Site Request Forgery (CSRF) vulnerability was discovered in the System Management Interface Web component of Avaya Aura Communication Manager and Avaya Aura Messaging. This vulnerability could allow an unauthenticated remote attacker to perform Web administration actions with the privileged level of the authenticated user. Affected versions of Communication Manager are 7.0.x, 7.1.x prior to 7.1.3.5 and 8.0.x. Affected versions of Messaging are 7.0.x, 7.1 and 7.1 SP1.
A vulnerability was found in Navetti PricePoint 4.6.0.0. It has been declared as critical. This vulnerability affects unknown code. The manipulation leads to cross-site request forgery. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. Upgrading to version 4.7.0.0 is able to address this issue. It is recommended to upgrade the affected component.
Certain NETGEAR devices are affected by CSRF. This affects R6300v2 before 1.0.4.8, R6400v2 before 1.0.2.32, R6700 before 1.0.1.22, R6900 before 1.0.1.22, R7000P before 1.0.0.86, R6900P before 1.0.0.56, R7300 before 1.0.0.54, R8300 before 1.0.2.106, R8500 before 1.0.2.106, DGN2200v4 before 1.0.0.86, DGND2200Bv4 before 1.0.0.86, R6050 before 1.0.0.86, JR6150 before 1.0.1.10, R6220 before 1.1.0.50, and WNDR3700v5 before V1.1.0.48.
In Honeywell WIN-PAK 4.7.2, Web and prior versions, the affected product is vulnerable to a cross-site request forgery, which may allow an attacker to remotely execute arbitrary code.
Certain NETGEAR devices are affected by CSRF. This affects R8300 before 1.0.2.94 and R8500 before 1.0.2.94.
Cross-site request forgery (CSRF) vulnerability in WMR-433 firmware Ver.1.02 and earlier, WMR-433W firmware Ver.1.40 and earlier allows remote attackers to hijack the authentication of administrators via unspecified vectors.
Certain NETGEAR devices are affected by CSRF. This affects D6200 before 1.1.00.24, D7000 before 1.0.1.52, JNR1010v2 before 1.1.0.44, JWNR2010v5 before 1.1.0.44, JR6150 before 1.0.1.12, PR2000 before 1.0.0.20, R6020 before 1.0.0.26, R6050 before 1.0.1.12, R6080 before 1.0.0.26, R6120 before 1.0.0.36, R6220 before 1.1.0.60, R6700v2 before 1.2.0.12, R6800 before 1.2.0.12, R6900v2 before 1.2.0.12, WNDR3700v5 before 1.1.0.50, WNR1000v4 before 1.1.0.44, WNR2020 before 1.1.0.44, and WNR2050 before 1.1.0.44.
A vulnerability, which was classified as problematic, has been found in Solare Solar-Log 2.8.4-56/3.5.2-85. Affected by this issue is some unknown functionality. The manipulation leads to cross site request forgery. The attack may be launched remotely. Upgrading to version 3.5.3-86 is able to address this issue. It is recommended to upgrade the affected component.
The marketo-forms-and-tracking plugin through 1.0.2 for WordPress allows wp-admin/admin.php?page=marketo_fat CSRF with resultant XSS.
Certain NETGEAR devices are affected by CSRF. This affects D1500 before 1.0.0.25, D500 before 1.0.0.25, D6100 before 1.0.0.55, D7000 before 1.0.1.50, D7800 before 1.0.1.28, EX6100v2 before 1.0.1.60, EX6150v2 before 1.0.1.60, JNR1010v2 before 1.1.0.46, JR6150 before 1.0.1.16, JWNR2010v5 before 1.1.0.46, PR2000 before 1.0.0.18, R6020 before 1.0.0.26, R6050 before 1.0.1.16, R6080 before 1.0.0.26, R6100 before 1.0.1.20, R6220 before 1.1.0.60, R7500 before 1.0.0.118, R7500v2 before 1.0.3.20, R7800 before 1.0.2.40, R9000 before 1.0.2.52, WN3000RPv3 before 1.0.2.50, WN3100RPv2 before 1.0.0.40, WNDR3700v5 before 1.1.0.48, WNDR4300v2 before 1.0.0.48, WNDR4500v3 before 1.0.0.48, WNR1000v4 before 1.1.0.46, WNR2000v5 before 1.0.0.62, WNR2020 before 1.1.0.46, and WNR2050 before 1.1.0.46.
Certain NETGEAR devices are affected by CSRF. This affects R6050/JR6150 before 1.0.1.7, PR2000 before 1.0.0.17, R6220 before 1.1.0.50, WNDR3700v5 before 1.1.0.48, JNR1010v2 before 1.1.0.40, JWNR2010v5 before 1.1.0.40, WNR1000v4 before 1.1.0.40, WNR2020 before 1.1.0.40, WNR2050 before 1.1.0.40, WNR614 before 1.1.0.40, WNR618 before 1.1.0.40, and D7000 before 1.0.1.50.
Certain NETGEAR devices are affected by CSRF. This affects EX6100 before 1.0.2.16_1.1.130, EX6100v2 before 1.0.1.70, EX6150v2 before 1.0.1.54, EX6200v2 before 1.0.1.50, EX6400 before 1.0.1.60, EX7300 before 1.0.1.60, and WN3000RPv3 before 1.0.2.44.
Cross-site request forgery (CSRF) vulnerability in MFC-J960DWN firmware ver.D and earlier allows remote attackers to hijack the authentication of administrators via unspecified vectors.
A vulnerability was found in Global Content Blocks Plugin 2.1.5. It has been declared as problematic. This vulnerability affects unknown code. The manipulation leads to cross-site request forgery. The attack can be initiated remotely.
Certain NETGEAR devices are affected by CSRF. This affects JR6150 before 1.0.1.10, R6050 before 1.0.1.10, R6250 before 1.0.4.12, R6300v2 before 1.0.4.8, R6700 before 1.0.1.16, R6900 before 1.0.1.16, R7300DST before 1.0.0.54, R7900 before 1.0.1.12, R8000 before 1.0.3.32, and R8500 before 1.0.2.74.
Certain NETGEAR devices are affected by CSRF. This affects R7300 before 1.0.0.54, R8500 before 1.0.2.94, DGN2200v1 before 1.0.0.55, and D2200D/D2200DW-1FRNAS before 1.0.0.32.
The nelio-ab-testing plugin before 4.6.4 for WordPress has CSRF in experiment forms.
PHP Scripts Mall PHP Multivendor Ecommerce has CSRF via admin/sellerupd.php.
The invite-anyone plugin before 1.3.16 for WordPress has admin-panel CSRF.
FS Lynda Clone has CSRF via user/edit_profile, as demonstrated by adding content to the user panel.
The democracy-poll plugin before 5.4 for WordPress has CSRF via wp-admin/options-general.php?page=democracy-poll&subpage=l10n.
Biometric Shift Employee Management System has CSRF via index.php in an edit_holiday action.
admin/configuration.php in Piwigo 2.9.2 has CSRF.
PHP Scripts Mall Professional Service Script has CSRF via admin/general_settingupd.php, as demonstrated by modifying a setting in the user panel.
The avada theme before 5.1.5 for WordPress has CSRF.
PHP Scripts Mall Car Rental Script has CSRF via admin/sitesettings.php.
PHP Scripts Mall Single Theater Booking has CSRF via admin/sitesettings.php.
The twitter-cards-meta plugin before 2.5.0 for WordPress has CSRF.
The update user administration resource in Atlassian Bamboo before version 6.3.1 allows remote attackers to modify user data including passwords via a Cross-site request forgery (CSRF) vulnerability.
The responsive-menu plugin before 3.1.4 for WordPress has no CSRF protection mechanism for the admin interface.
Cross Site Request Forgery vulnerability in the firewall ePO extension of McAfee Endpoint Security (ENS) prior to 10.7.0 November 2020 Update allows an attacker to execute arbitrary HTML code due to incorrect security configuration.
In Apache Airflow 1.8.2 and earlier, a CSRF vulnerability allowed for a remote command injection on a default install of Airflow.
Nagios Log Server 2.1.3 has CSRF.
IBM Business Process Manager 8.6 is vulnerable to cross-site request forgery which could allow an attacker to execute malicious and unauthorized actions transmitted from a user that the website trusts. IBM X-Force ID: 136783.
Piwigo 2.9.2 is vulnerable to Cross-Site Request Forgery via /admin.php?page=configuration§ion=main or /admin.php?page=batch_manager&mode=unit. An attacker can exploit this to coerce an admin user into performing unintended actions.
Vanguard Marketplace Digital Products PHP has CSRF via /search.
Readymade Video Sharing Script has CSRF via user-profile-edit.php.
The saveConfigureSecurity resource in Atlassian Bamboo before version 6.3.1 allows remote attackers to modify security settings via a Cross-site request forgery (CSRF) vulnerability.
Cross-site request forgery (CSRF) vulnerabilities exist in the Auth0 plugin before 4.0.0 for WordPress via the domain field.
Readymade Job Site Script has CSRF via the /job URI.
Subrion CMS 4.1.5 has CSRF in blog/delete/.
PHP Scripts Mall Responsive Realestate Script has CSRF via admin/general.
The jayj-quicktag plugin before 1.3.2 for WordPress has CSRF.
The newsletter-by-supsystic plugin before 1.1.8 for WordPress has CSRF.
The custom-sidebars plugin before 3.1.0 for WordPress has CSRF related to set location, import actions, and export actions.
Cross-site request forgery (CSRF) vulnerability in Easy Property Listings versions prior to 3.4 allows remote attackers to hijack the authentication of administrators via unspecified vectors.