Apache OFBiz has unsafe deserialization prior to 17.12.06. An unauthenticated attacker can use this vulnerability to successfully take over Apache OFBiz.

Deserialization of untrusted data vulnerability that may allow class-registration checks to be bypassed during Java lambda deserialization. Only lambda capture class is affected This issue affects Apache Fory: from before 1.4.0. Users are recommended to upgrade to version 1.4.0, which fixes the issue.

Heap type confusion and out-of-bounds read/write in the Apache Fory C++ implementation. When deserializing data in compatible mode, the field-skip paths do not correctly validate the declared field types against the actual data, so input with an inconsistent schema can cause type confusion and out-of-bounds memory access. Only the C++ implementation is affected; other language implementations of Apache Fory are not. This issue affects Apache Fory C++: from 0.14.0 before 1.4.0. Users are recommended to upgrade to version 1.4.0, which fixes the issue.

In Apache Solr versions 5.0.0 to 5.5.5 and 6.0.0 to 6.6.5, the Config API allows to configure the JMX server via an HTTP POST request. By pointing it to a malicious RMI server, an attacker could take advantage of Solr's unsafe deserialization to trigger remote code execution on the Solr side.

Each Apache Dubbo server will set a serialization id to tell the clients which serialization protocol it is working on. But for Dubbo versions before 2.7.8 or 2.6.9, an attacker can choose which serialization id the Provider will use by tampering with the byte preamble flags, aka, not following the server's instruction. This means that if a weak deserializer such as the Kryo and FST are somehow in code scope (e.g. if Kryo is somehow a part of a dependency), a remote unauthenticated attacker can tell the Provider to use the weak deserializer, and then proceed to exploit it.

ZKConfigurationStore which is optionally used by CapacityScheduler of Apache Hadoop YARN deserializes data obtained from ZooKeeper without validation. An attacker having access to ZooKeeper can run arbitrary commands as YARN user by exploiting this. Users should upgrade to Apache Hadoop 2.10.2, 3.2.4, 3.3.4 or later (containing YARN-11126) if ZKConfigurationStore is used.

CVE-2020-9493 identified a deserialization issue that was present in Apache Chainsaw. Prior to Chainsaw V2.0 Chainsaw was a component of Apache Log4j 1.2.x where the same issue exists.

An attacker can use SnakeYAML to deserialize java.net.URLClassLoader and make it load a JAR from a specified URL, and then deserialize javax.script.ScriptEngineManager to load code using that ClassLoader. This unbounded deserialization can likely lead to remote code execution. The code can be run in Helix REST start and Workflow creation. Affect all the versions lower and include 1.2.0. Affected products: helix-core, helix-rest Mitigation: Short term, stop using any YAML based configuration and workflow creation.                   Long term, all Helix version bumping up to 1.3.0 

Deserialization of Untrusted Data vulnerability in Apache Lucene.Net.Replicator. This issue affects Apache Lucene.NET's Replicator library: from 4.8.0-beta00005 through 4.8.0-beta00016. An attacker that can intercept traffic between a replication client and server, or control the target replication node URL, can provide a specially-crafted JSON response that is deserialized as an attacker-provided exception type. This can result in remote code execution or other potential unauthorized access. Users are recommended to upgrade to version 4.8.0-beta00017, which fixes the issue.

If an attacker gains write access to the Apache Superset metadata database, they could persist a specifically crafted Python object that may lead to remote code execution on Superset's web backend. The Superset metadata db is an 'internal' component that is typically only accessible directly by the system administrator and the superset process itself. Gaining access to that database should be difficult and require significant privileges. This vulnerability impacts Apache Superset versions 1.5.0 up to and including 2.1.0. Users are recommended to upgrade to version 2.1.1 or later.

The JMX server embedded in Apache James, also used by the command line client is exposed to a java de-serialization issue, and thus can be used to execute arbitrary commands. As James exposes JMX socket by default only on local-host, this vulnerability can only be used for privilege escalation. Release 3.0.1 upgrades the incriminated library.

Schema parsing in the parquet-avro module of Apache Parquet 1.15.0 and previous versions allows bad actors to execute arbitrary code Users are recommended to upgrade to version 1.15.1, which fixes the issue.

FasterXML jackson-databind before 2.7.9.3, 2.8.x before 2.8.11.1 and 2.9.x before 2.9.5 allows unauthenticated remote code execution because of an incomplete fix for the CVE-2017-7525 deserialization flaw. This is exploitable by sending maliciously crafted JSON input to the readValue method of the ObjectMapper, bypassing a blacklist that is ineffective if the c3p0 libraries are available in the classpath.

Java object deserialization issue in Jackrabbit webapp/standalone on all platforms allows attacker to remotely execute code via RMIVersions up to (including) 2.20.10 (stable branch) and 2.21.17 (unstable branch) use the component "commons-beanutils", which contains a class that can be used for remote code execution over RMI. Users are advised to immediately update to versions 2.20.11 or 2.21.18. Note that earlier stable branches (1.0.x .. 2.18.x) have been EOLd already and do not receive updates anymore. In general, RMI support can expose vulnerabilities by the mere presence of an exploitable class on the classpath. Even if Jackrabbit itself does not contain any code known to be exploitable anymore, adding other components to your server can expose the same type of problem. We therefore recommend to disable RMI access altogether (see further below), and will discuss deprecating RMI support in future Jackrabbit releases. How to check whether RMI support is enabledRMI support can be over an RMI-specific TCP port, and over an HTTP binding. Both are by default enabled in Jackrabbit webapp/standalone. The native RMI protocol by default uses port 1099. To check whether it is enabled, tools like "netstat" can be used to check. RMI-over-HTTP in Jackrabbit by default uses the path "/rmi". So when running standalone on port 8080, check whether an HTTP GET request on localhost:8080/rmi returns 404 (not enabled) or 200 (enabled). Note that the HTTP path may be different when the webapp is deployed in a container as non-root context, in which case the prefix is under the user's control. Turning off RMIFind web.xml (either in JAR/WAR file or in unpacked web application folder), and remove the declaration and the mapping definition for the RemoteBindingServlet:         <servlet>             <servlet-name>RMI</servlet-name>             <servlet-class>org.apache.jackrabbit.servlet.remote.RemoteBindingServlet</servlet-class>         </servlet>         <servlet-mapping>             <servlet-name>RMI</servlet-name>             <url-pattern>/rmi</url-pattern>         </servlet-mapping> Find the bootstrap.properties file (in $REPOSITORY_HOME), and set         rmi.enabled=false     and also remove         rmi.host         rmi.port         rmi.url-pattern  If there is no file named bootstrap.properties in $REPOSITORY_HOME, it is located somewhere in the classpath. In this case, place a copy in $REPOSITORY_HOME and modify it as explained.

In Apache Batik 1.x before 1.10, when deserializing subclass of `AbstractDocument`, the class takes a string from the inputStream as the class name which then use it to call the no-arg constructor of the class. Fix was to check the class type before calling newInstance in deserialization.

A deserialization flaw was found in Apache Chainsaw versions prior to 2.1.0 which could lead to malicious code execution.

Path Equivalence: 'file.Name' (Internal Dot) leading to Remote Code Execution and/or Information disclosure and/or malicious content added to uploaded files via write enabled Default Servlet in Apache Tomcat. This issue affects Apache Tomcat: from 11.0.0-M1 through 11.0.2, from 10.1.0-M1 through 10.1.34, from 9.0.0.M1 through 9.0.98. The following versions were EOL at the time the CVE was created but are known to be affected: 8.5.0 though 8.5.100. Other, older, EOL versions may also be affected. If all of the following were true, a malicious user was able to view security sensitive files and/or inject content into those files: - writes enabled for the default servlet (disabled by default) - support for partial PUT (enabled by default) - a target URL for security sensitive uploads that was a sub-directory of a target URL for public uploads - attacker knowledge of the names of security sensitive files being uploaded - the security sensitive files also being uploaded via partial PUT If all of the following were true, a malicious user was able to perform remote code execution: - writes enabled for the default servlet (disabled by default) - support for partial PUT (enabled by default) - application was using Tomcat's file based session persistence with the default storage location - application included a library that may be leveraged in a deserialization attack Users are recommended to upgrade to version 11.0.3, 10.1.35 or 9.0.99, which fixes the issue.

Apache James prior to version 3.7.5 and 3.8.0 exposes a JMX endpoint on localhost subject to pre-authentication deserialisation of untrusted data. Given a deserialisation gadjet, this could be leveraged as part of an exploit chain that could result in privilege escalation. Note that by default JMX endpoint is only bound locally. We recommend users to:  - Upgrade to a non-vulnerable Apache James version  - Run Apache James isolated from other processes (docker - dedicated virtual machine)  - If possible turn off JMX

Apache Airflow, versions before 2.8.1, have a vulnerability that allows a potential attacker to poison the XCom data by bypassing the protection of "enable_xcom_pickling=False" configuration setting resulting in poisoned data after XCom deserialization. This vulnerability is considered low since it requires a DAG author to exploit it. Users are recommended to upgrade to version 2.8.1 or later, which fixes this issue.

Deserialization of Untrusted Data vulnerability in Apache IoTDB.This issue affects Apache IoTDB: from 0.13.0 through 0.13.4. Users are recommended to upgrade to version 1.2.2, which fixes the issue.

Arbitrary Class Instantiation via Model Manifest in Apache OpenNLP ExtensionLoader Versions Affected: before 1.9.5, before 2.5.9, before 3.0.0-M3 Description:  The ExtensionLoader.instantiateExtension(Class, String) method loads a class by its fully-qualified name via Class.forName() and invokes its no-arg constructor, with the class name sourced from the manifest.properties entry of a model archive. The existing isAssignableFrom check correctly rejects classes that are not subtypes of the expected extension interface (BaseToolFactory for factory=, ArtifactSerializer for serializer-class-*), but the check runs after Class.forName() has already loaded and initialized the named class. Class.forName() with default initialization semantics executes the target class's static initializer before returning, so an attacker who can supply a crafted model archive can cause the static initializer of any class on the classpath to run during model loading, regardless of whether that class passes the subsequent type check. Exploitation requires a class with attacker-useful side effects in its static initializer (for example, JNDI lookup, outbound network I/O, or filesystem access) to be present on the classpath, so this is not a drop-in remote code execution; however, the attack surface grows as third-party model distribution becomes more common (community model repositories, Hugging Face-style sharing), where users routinely load model files from origins they do not control. A secondary, narrower vector affects deployments that ship legitimate BaseToolFactory or ArtifactSerializer subclasses with side-effecting no-arg constructors: a malicious manifest can name such a class and force its constructor to run during model load. Mitigation:  * 2.x users should upgrade to 2.5.9. * 3.x users should upgrade to 3.0.0-M3. Note: The fix introduces a package-prefix allowlist that is consulted before Class.forName() is invoked, so the static initializer of a disallowed class is never executed. Classes under the opennlp. prefix remain permitted by default. Deployments that load models referencing factories or serializers outside opennlp.* must opt those packages in, either programmatically via ExtensionLoader.registerAllowedPackage(String) before the first model load, or by setting the OPENNLP_EXT_ALLOWED_PACKAGES system property to a comma-separated list of allowed package prefixes. Users who cannot upgrade immediately should ensure that all model files are sourced from trusted origins and should audit their classpath for classes with side-effecting static initializers or constructors, particularly any that perform JNDI lookups, network requests, or filesystem operations during class initialization.

OpenStack Object Storage (swift) before 1.7.0 uses the loads function in the pickle Python module unsafely when storing and loading metadata in memcached, which allows remote attackers to execute arbitrary code via a crafted pickle object.

Deserialization of Untrusted Data vulnerability in Apache InLong.This issue affects Apache InLong: from 1.7.0 through 1.9.0, the attackers can make a arbitrary file read attack using mysql driver. Users are advised to upgrade to Apache InLong's 1.10.0 or cherry-pick [1] to solve it. [1]  https://github.com/apache/inlong/pull/9331

A JNDI Injection vulnerability has been discovered in Apache CXF's JCA integration module, which can allow for code execution, if an attacker is able to manipulate the JCA deployment descriptor (ra.xml) or runtime activation parameters. Users are recommended to upgrade to versions 4.2.2 or 4.1.7, which fixes this issue.

In Apache ShardingSphere(incubator) 4.0.0-RC3 and 4.0.0, the ShardingSphere's web console uses the SnakeYAML library for parsing YAML inputs to load datasource configuration. SnakeYAML allows to unmarshal data to a Java type By using the YAML tag. Unmarshalling untrusted data can lead to security flaws of RCE.

Deserialization of Untrusted Data in the Java replace-resolve path in Apache Fory fory-core Java SDK before 1.1.0 on Java/JVM platforms allows a remote attacker to bypass class registration, TypeChecker, and DisallowedList checks and invoke classpath-present readResolve/readExternal hooks via crafted Fory serialized data. Users are recommended to upgrade to version 1.1.0 or later, which fixes this issue.

A Java Serialization vulnerability was found in Apache Tapestry 4. Apache Tapestry 4 will attempt to deserialize the "sp" parameter even before invoking the page's validate method, leading to deserialization without authentication. Apache Tapestry 4 reached end of life in 2008 and no update to address this issue will be released. Apache Tapestry 5 versions are not vulnerable to this issue. Users of Apache Tapestry 4 should upgrade to the latest Apache Tapestry 5 version.

When handler-router component is enabled in servicecomb-java-chassis, authenticated user may inject some data and cause arbitrary code execution. The problem happens in versions between 2.0.0 ~ 2.1.3 and fixed in Apache ServiceComb-Java-Chassis 2.1.5

Deserialization of untrusted data in Apache Fory PyFory. PyFory's ReduceSerializer could bypass documented DeserializationPolicy validation hooks during reduce-state restoration and global-name resolution. An application is vulnerable if it deserializes attacker-controlled data using PyFory Python-native mode with strict mode disabled and relies on DeserializationPolicy to restrict unsafe classes, functions, or module attributes. This issue affects Apache Fory: from before 1.0.0. Mitigation: Users of Apache Fory are recommended to upgrade to version 1.0.0 or later, which enforces DeserializationPolicy validation for the affected ReduceSerializer paths and thus fixes this issue.

Deserialization of Untrusted Data vulnerability in Apache Camel PQC component. The camel-pqc component persists post-quantum key metadata (KeyMetadata) through pluggable KeyLifecycleManager implementations. HashicorpVaultKeyLifecycleManager and AwsSecretsManagerKeyLifecycleManager read that metadata back from the configured secret backend by deserializing a Base64-wrapped value with a raw java.io.ObjectInputStream.readObject() and no ObjectInputFilter or class allow-list; the cast to KeyMetadata happens only after readObject() returns, so any readObject() side effects in a crafted object run before the type check. The same unfiltered legacy-migration read also remained in FileBasedKeyLifecycleManager (for the stored KeyPair and KeyMetadata). A principal who can write to the operator-controlled backend that holds these values - the HashiCorp Vault KV path, or the AWS Secrets Manager secret (requiring a Vault token or secretsmanager:PutSecretValue) - could store a crafted serialized object that is deserialized during normal key-lifecycle operations, potentially leading to code execution in the context of the application that manages the keys. This is an incomplete-remediation follow-on to CVE-2026-40048 (CAMEL-23200), which changed FileBasedKeyLifecycleManager to store metadata as JSON / PKCS#8 / X.509 but did not add an ObjectInputFilter, did not cover the Vault and AWS sibling managers, and left FileBasedKeyLifecycleManager's own legacy-migration deserialization unfiltered. This issue affects Apache Camel: from 4.18.0 before 4.18.3, from 4.19.0 before 4.21.0. Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.18.x LTS releases stream, then they are suggested to upgrade to 4.18.3. For deployments that cannot upgrade immediately, restrict write access to the key backend so that only the application's own identity can write the camel-pqc secrets (least-privilege HashiCorp Vault policies and secretsmanager:PutSecretValue IAM), and keep the PQC key material in a backend separate from any data that less-trusted principals can write.

In Apache Linkis <=1.3.1, because the parameters are not effectively filtered, the attacker uses the MySQL data source and malicious parameters to configure a new data source to trigger a deserialization vulnerability, eventually leading to remote code execution. Versions of Apache Linkis <= 1.3.0 will be affected. We recommend users upgrade the version of Linkis to version 1.3.2.

Untrusted Java Deserialization in Apache OpenNLP SvmDoccatModel Versions Affected:   before 3.0.0-M4 (libsvm document categorization module; introduced in   OPENNLP-1808 and only present on the 3.x line) Description: SvmDoccatModel.deserialize(InputStream) reads an attacker-controlled stream with java.io.ObjectInputStream and calls readObject() without an ObjectInputFilter installed. ObjectInputStream materialises every class referenced in the stream before the resulting object is cast to SvmDoccatModel, so the cast that follows readObject() executes only after the foreign object graph has already been deserialised in full. If a Java deserialization gadget chain is available on the consumer's classpath, a crafted payload supplied to deserialize() executes arbitrary code in the JVM that loads it. Apache OpenNLP itself does not ship a known gadget chain, so the realistic risk is to downstream applications that embed the libsvm module alongside vulnerable transitive dependencies. The method is public and static, so any caller can pass an untrusted stream to it directly. The practical impact is remote code execution against processes that load SvmDoccatModel instances from untrusted or semi-trusted origins. Mitigation: 3.x users should upgrade to 3.0.0-M4. Users who cannot upgrade immediately should treat all serialized SvmDoccatModel streams as untrusted input unless their provenance is verified, and should avoid invoking SvmDoccatModel.deserialize() on streams supplied by end users or fetched from third-party sources without integrity checks.

FasterXML jackson-databind through 2.8.11 and 2.9.x through 2.9.3 allows unauthenticated remote code execution because of an incomplete fix for the CVE-2017-7525 and CVE-2017-17485 deserialization flaws. This is exploitable via two different gadgets that bypass a blacklist.

Improper deserialization in WebGL in Google Chrome on Mac prior to 68.0.3440.75 allowed a remote attacker to potentially exploit heap corruption via a crafted HTML page.

Deserialization of Untrusted Data vulnerability in Apache Camel, Apache Camel JMS component. JmsBinding.extractBodyFromJms() in camel-jms - and the equivalent JmsBinding in camel-sjms - deserializes the payload of an incoming JMS ObjectMessage via jakarta.jms.ObjectMessage.getObject() whenever the mapJmsMessage option is enabled (the default) and Camel acts as a JMS consumer. The CVE-2026-40860 hardening added a post-deserialization class check that rejects classes outside the default allow-list java.**;javax.**;org.apache.camel.**;!*. However org.apache.camel.support.DefaultExchangeHolder itself lives in the allow-listed org.apache.camel.** namespace, so an ObjectMessage whose top-level object is a DefaultExchangeHolder passes the check. The receiving side then calls DefaultExchangeHolder.unmarshal() on it without requiring the transferExchange option to be enabled - an asymmetric trust boundary, since the sending side gates ObjectMessage and transferExchange handling but the receiving side did not - writing every non-null field of the holder into the Exchange: the message body, the IN and OUT headers, the exchange properties, the variables, the exchange id and the exception. An attacker who can publish an ObjectMessage to a queue or topic consumed by an affected Camel application can therefore inject arbitrary Exchange state using only universally-trusted java.lang and java.util types, with no deserialization gadget chain required, to manipulate routing and headers, exchange properties and error handling. The same handling applies to camel-sjms and camel-sjms2, and to the JMS-family components built on JmsComponent and JmsBinding: camel-amqp, camel-activemq and camel-activemq6. This is a bypass of the CVE-2026-40860 fix rather than a flaw in it. This issue affects Apache Camel: from 3.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0; Apache Camel: from 3.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0. Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. After upgrading, JMS ObjectMessage handling is disabled by default in camel-jms, camel-sjms and the JMS-family components (a new objectMessageEnabled option defaults to false at the component and endpoint level), so an incoming ObjectMessage - including a DefaultExchangeHolder payload - is no longer deserialized unless the option is explicitly enabled; only set objectMessageEnabled=true when the consumed JMS destination is fed exclusively by trusted producers. For deployments that cannot upgrade immediately, restrict publish access to the queues and topics consumed by Camel to trusted producers via JMS broker authorization, and do not expose JMS consumers that map ObjectMessage bodies to untrusted networks; a JMS-provider deserialization allow-list does not mitigate this specific bypass because the crafted payload uses only universally-trusted classes.

Deserialization of Untrusted Data vulnerability in Apache Camel PQC Component. The camel-pqc component persists post-quantum key metadata (KeyMetadata) through pluggable KeyLifecycleManager implementations. AwsSecretsManagerKeyLifecycleManager.deserializeMetadata() reads that metadata back from the configured AWS Secrets Manager secret by Base64-decoding the stored value and deserializing it with a raw java.io.ObjectInputStream.readObject() and no ObjectInputFilter or class allow-list; the cast to KeyMetadata happens only after readObject() returns, so any readObject() side effects in a crafted object run before the type check. A principal who can write to the AWS Secrets Manager secret that holds this metadata (requiring secretsmanager:PutSecretValue on that secret) could store a crafted serialized object that is deserialized during normal key-lifecycle operations, potentially leading to code execution in the context of the application that manages the keys. This is the same underlying defect, in the same code path and remediated by the same fix, as CVE-2026-46590, which was reported independently and additionally covers the HashiCorp Vault and file-based sibling managers; both are incomplete-remediation follow-ons to CVE-2026-40048 (CAMEL-23200). This issue affects Apache Camel: from 4.18.0 before 4.18.3, from 4.19.0 before 4.21.0. Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.18.x LTS releases stream, then they are suggested to upgrade to 4.18.3. For deployments that cannot upgrade immediately, restrict write access to the AWS Secrets Manager secret that holds the camel-pqc key metadata so that only the application’s own identity holds secretsmanager:PutSecretValue on it (least-privilege IAM), and keep the PQC key material in a secret separate from any data that less-trusted principals can write.

Deserialization of Untrusted Data vulnerability in Apache Camel Hazelcast component. The camel-hazelcast component creates and manages Hazelcast instances using a default configuration that applies no Java deserialization filter. When Camel builds the Hazelcast Config itself - that is, when no user-supplied HazelcastInstance, hazelcastConfigUri, or referenced Config bean is provided - neither Hazelcast's JavaSerializationFilterConfig nor a Camel-side ObjectInputFilter is configured, so objects received over the Hazelcast cluster protocol are deserialized inside Hazelcast's own serialization layer (ObjectInputStream.readObject) before Camel ever processes them. An attacker who can join or otherwise reach the Hazelcast cluster can publish a crafted serialized Java object that is then deserialized on every Camel node, resulting in remote code execution. The exposure is present by default and requires no opt-in endpoint configuration: any route using a hazelcast consumer (hazelcast-topic, hazelcast-queue, hazelcast-seda, hazelcast-map, hazelcast-multimap, hazelcast-replicatedmap, hazelcast-list, hazelcast-set), as well as the HazelcastAggregationRepository and HazelcastIdempotentRepository, is affected whenever the managed instance is created from Camel's default configuration. This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0. Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. The fix makes Camel apply a default Hazelcast JavaSerializationFilterConfig (whitelisting the java., javax. and org.apache.camel. class-name prefixes and blacklisting java.net.) to instances it creates from its own default configuration, while leaving any user-supplied Config or HazelcastInstance untouched. For deployments that cannot upgrade immediately, configure a deserialization filter on the Hazelcast instance (Hazelcast JavaSerializationFilterConfig, or the JVM-wide system property -Djdk.serialFilter=!java.net.**;java.**;javax.**;org.apache.camel.**;!*) and enable Hazelcast cluster authentication and TLS to restrict who can reach the cluster.

The fix for CVE-2026-41635 was not applied to the 2.1.X and 2.2.X branches. Here was the original issue description: Apache MINA's AbstractIoBuffer.resolveClass() contains two branches, one of them (for static classes or primitive types) does not check the class at all, bypassing the classname allowlist and allowing arbitrary code to be executed. The fix checks if the class is present in the accepted class filter before calling Class.forName(). Affected versions are Apache MINA 2.1.0 <= 2.1.11, and 2.2.0 <= 2.2.6. The problem is resolved in Apache MINA 2.1.12, and 2.2.7 by applying the classname allowlist earlier. Affected are applications using Apache MINA that call IoBuffer.getObject(). Applications using Apache MINA are advised to upgrade.

A bug in Apache Airflow's XCom PATCH endpoint `PATCH /api/v2/xcomEntries/{key}` allowed an authenticated UI/API user with XCom write permission on a Dag to set XCom entries under reserved key names (e.g. `return_value`) that the matching POST endpoint already validated against `FORBIDDEN_XCOM_KEYS`. The endpoint also accepted serialized payload shapes the triggerer's deserializer treats as code; combined, this allowed RCE on the triggerer when the affected task next deferred. Affects deployments where untrusted users have XCom write permission on Dags that defer to the triggerer. This is a fix-bypass of CVE-2026-33858: PR #64148 added the `FORBIDDEN_XCOM_KEYS` validator only on the POST/set path; the PATCH path was not covered. Users who already upgraded for CVE-2026-33858 should additionally upgrade to `apache-airflow` 3.2.2 or later to cover the PATCH-path bypass.

Deserialization of Untrusted Data vulnerability in Apache Camel. The default ObjectInputFilter pattern shipped with several Apache Camel components for defense-in-depth deserialization filtering ('java.**;javax.**;org.apache.camel.**;!*', or the no-'javax.**' variant in the aggregation-repository components) uses a recursive 'java.**' glob that admits classes whose hashCode/equals/readObject methods perform network I/O, notably java.net.URL and java.net.InetAddress. When an attacker can deliver a Java-serialized payload to an affected Camel consumer, deserialization of a HashMap (or any collection that calls hashCode on its elements) containing java.net.URL keys causes the JVM to issue DNS queries to the attacker-supplied host during the deserialization side-effect. The class-level filter check passes because the resulting object's class (HashMap) is allow-listed; the DNS query is observable on an attacker-controlled DNS server, providing an out-of-band side channel. The exposure is highest on the camel-jms family because JmsBinding.extractBodyFromJms invokes ObjectMessage.getObject() unconditionally when mapJmsMessage=true (default). Affected components: camel-jms, camel-sjms, camel-amqp, camel-mina, camel-netty, camel-netty-http, camel-vertx-http, camel-infinispan, and the aggregation repository components camel-leveldb, camel-cassandraql, camel-consul, camel-sql (JDBC aggregation repository). This issue affects Apache Camel: from 4.14.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0. Users are recommended to upgrade to a version that contains the CAMEL-23372 fix once available: 4.21.0 for the 4.21.x line, 4.18.3 for the 4.18.x line, and 4.14.8 for the 4.14.x line. For deployments that cannot upgrade immediately, configure a JMS-provider-side allow-list (Apache ActiveMQ Artemis 'deserializationAllowList' / 'deserializationDenyList', Apache ActiveMQ Classic 'org.apache.activemq.SERIALIZABLE_PACKAGES') as the primary mitigation, and/or override the in-code default via the endpoint-level 'deserializationFilter' option or the JVM-wide '-Djdk.serialFilter' system property with an explicit deny: '!java.net.**;java.**;javax.**;org.apache.camel.**;!*' (or '!java.net.**;java.**;org.apache.camel.**;!*' for the aggregation-repository components, which do not include javax.**).

Apache MINA's AbstractIoBuffer.resolveClass() contains two branches, one of them (for static classes or primitive types) does not check the class at all, bypassing the classname allowlist and allowing arbitrary code to be executed. The fix checks if the class is present in the accepted class filter before calling Class.forName().  Affected versions are Apache MINA 2.0.0 <= 2.0.27, 2.1.0 <= 2.1.10, and 2.2.0 <= 2.2.5. The problem is resolved in Apache MINA 2.0.28, 2.1.11, and 2.2.6 by applying the classname allowlist earlier. Affected are applications using Apache MINA that call  IoBuffer.getObject(). Applications using Apache MINA are advised to upgrade.

The Camel-PQC FileBasedKeyLifecycleManager class deserializes the contents of `<keyId>.key` files in the configured key directory using java.io.ObjectInputStream without applying any ObjectInputFilter or class-loading restrictions. The cast to `java.security.KeyPair` is evaluated only after `readObject()` has already returned, so any `readObject()` side effects in the deserialized object run before the type check. An attacker who can write to the key directory used by a Camel application — for example through a path traversal into the directory, misconfigured filesystem permissions on the volume where keys are stored, a compromised key provisioning pipeline, or a symlink attack — can place a crafted serialized Java object that, when deserialized during normal key lifecycle operations, results in arbitrary code execution in the context of the application. This issue affects Apache Camel: from 4.19.0 before 4.20.0, from 4.18.0 before 4.18.2. Users are recommended to upgrade to version 4.20.0, which fixes the issue by replacing java.io.ObjectInputStream-based key and metadata storage with standard PKCS#8 (private key) / X.509 SubjectPublicKeyInfo (public key) Base64 JSON encoding. For users on the 4.18.x LTS releases stream, upgrade to 4.18.2.

The camel-mina component's MinaConverter.toObjectInput(IoBuffer) type converter wraps an IoBuffer in a java.io.ObjectInputStream without applying any ObjectInputFilter or class-loading restrictions. When a Camel route uses camel-mina as a TCP or UDP consumer and requests conversion to ObjectInput (for example via getBody(ObjectInput.class) or @Body ObjectInput), an attacker sending a crafted serialized Java object over the network to the MINA consumer port can trigger arbitrary code execution in the context of the application during readObject(). This issue affects Apache Camel: from 3.0.0 before 4.14.6, from 4.15.0 before 4.18.2, from 4.19.0 before 4.20.0. Users are recommended to upgrade to version 4.20.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.6. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.2.

JmsBinding.extractBodyFromJms() in camel-jms, and the equivalent JmsBinding class in camel-sjms, deserialized the payload of incoming JMS ObjectMessage values via javax.jms.ObjectMessage.getObject() without applying any ObjectInputFilter, class allowlist or class denylist. Because this code path is reached whenever the mapJmsMessage option is enabled (the default) and Camel acts as a JMS consumer, an attacker able to publish a crafted ObjectMessage to a queue or topic consumed by a Camel application could achieve remote code execution when a deserialization gadget chain was present on the classpath. The same handling was reached transitively through camel-sjms2 (whose Sjms2Endpoint extends SjmsEndpoint) and through camel-amqp (whose AMQPJmsBinding extends JmsBinding), and by other JMS-family components built on JmsComponent such as camel-activemq and camel-activemq6. This issue affects Apache Camel: from 3.0.0 before 4.14.7, from 4.15.0 before 4.18.2, from 4.19.0 before 4.20.0. Users are recommended to upgrade to version 4.20.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.7. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.2.

In Apache Linkis <=1.5.0, due to the lack of effective filtering of parameters, an attacker configuring malicious db2 parameters in the DataSource Manager Module will result in jndi injection. Therefore, the parameters in the DB2 URL should be blacklisted.  This attack requires the attacker to obtain an authorized account from Linkis before it can be carried out. Versions of Apache Linkis <=1.5.0 will be affected. We recommend users upgrade the version of Linkis to version 1.6.0.

Deserialization of Untrusted Data vulnerability in Apache Camel. The camel-vertx-http component deserializes HTTP response bodies carrying the Content-Type application/x-java-serialized-object using a raw java.io.ObjectInputStream, without applying any ObjectInputFilter (VertxHttpHelper.deserializeJavaObjectFromStream) This deserialization path is reached only when the producer endpoint is configured with transferException=true (or the component-level allowJavaSerializedObject=true) and throwExceptionOnFailure is left at its default value of true; in that case a backend HTTP response with a 5xx status and the application/x-java-serialized-object content type has its body deserialized with no class restrictions. An attacker who controls the backend the Camel producer talks to - through a man-in-the-middle position on an unencrypted (plain HTTP) connection, or by compromising the backend service - can return a crafted serialized Java object and, if a suitable gadget chain is present on the classpath, achieve remote code execution on the Camel application host. The path is not reachable in the default configuration, where transferException is false. This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.20.0. Users are recommended to upgrade to version 4.20.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. After upgrading, the deserialization performed by both helper utilities is constrained by a default ObjectInputFilter (allow-list java.**;javax.**;org.apache.camel.**;!*), which can be customised through the new deserializationFilter endpoint option or the JVM-wide -Djdk.serialFilter system property. For deployments that cannot upgrade immediately: do not enable transferException=true (or allowJavaSerializedObject=true) on producers that talk to untrusted or network-reachable backends; ensure producer connections use TLS (https) so that a response cannot be substituted by a man-in-the-middle; and, where the option is required, set an explicit -Djdk.serialFilter allow-list (for example java.**;org.apache.camel.**;!*) to constrain deserialization.

FasterXML jackson-databind 2.x before 2.9.8 might allow attackers to have unspecified impact by leveraging failure to block the axis2-transport-jms class from polymorphic deserialization.

Deserialization of Untrusted Data vulnerability in Apache Storm. Versions Affected: before 2.8.6. Description: When processing topology credentials submitted via the Nimbus Thrift API, Storm deserializes the base64-encoded TGT blob using ObjectInputStream.readObject() without any class filtering or validation. An authenticated user with topology submission rights could supply a crafted serialized object in the "TGT" credential field, leading to remote code execution in both the Nimbus and Worker JVMs. Mitigation: 2.x users should upgrade to 2.8.6. Users who cannot upgrade immediately should monkey-patch an ObjectInputFilter allow-list to ClientAuthUtils.deserializeKerberosTicket() restricting deserialized classes to javax.security.auth.kerberos.KerberosTicket and its known dependencies. A guide on how to do this is available in the release notes of 2.8.6. Credit: This issue was discovered by K.

A Broken Access Control vulnerability in Active Job versions >= 4.2.0 allows an attacker to craft user input which can cause Active Job to deserialize it using GlobalId and give them access to information that they should not have. This vulnerability has been fixed in versions 4.2.11, 5.0.7.1, 5.1.6.1, and 5.2.1.1.

The fix for CVE-2024-52046 in Apache MINA AbstractIoBuffer.getObject() was incomplete. The classname allowlist of classes allowed to be deserialized was applied too late after a static initializer in a class to be read might already have been executed. Affected versions are Apache MINA 2.0.0 <= 2.0.27, 2.1.0 <= 2.1.10, and 2.2.0 <= 2.2.5. The problem is resolved in Apache MINA 2.0.28, 2.1.11, and 2.2.6 by applying the classname allowlist earlier. Affected are applications using Apache MINA that call IoBuffer.getObject(). Applications using Apache MINA are advised to upgrade