Unspecified vulnerability in the command line interface (CLI) in Cisco Unified CallManager (CUCM) 5.0(1) through 5.0(3a) allows local users to execute arbitrary commands with elevated privileges via unspecified vectors, involving "certain CLI commands," aka bug CSCse11005.

A vulnerability in the CLI of Cisco NX-OS System Software could allow an authenticated, local attacker to perform a command injection attack. The vulnerability is due to insufficient input validation of command arguments to the CLI parser. An attacker could exploit this vulnerability by injecting crafted command arguments into a vulnerable CLI command and gaining unauthorized access to the underlying operating system of the device. An exploit could allow the attacker to execute arbitrary commands at the user's privilege level. On products that support multiple virtual device contexts (VDCs), this vulnerability could allow an attacker to execute commands at the user's privilege level outside the user's environment. This vulnerability affects the following products running Cisco NX-OS System Software: Multilayer Director Switches, Nexus 2000 Series Fabric Extenders, Nexus 3000 Series Switches, Nexus 5000 Series Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Nexus 9000 Series Switches in standalone NX-OS mode, Nexus 9500 R-Series Line Cards and Fabric Modules. Cisco Bug IDs: CSCve99902, CSCvf14879.

A vulnerability in the Cisco Unified Computing System (UCS) Manager, Cisco Firepower 4100 Series Next-Generation Firewall (NGFW), and Cisco Firepower 9300 Security Appliance could allow an authenticated, local attacker to obtain root shell privileges on the device, aka Command Injection. The vulnerability is due to improper validation of string input in the shell application. An attacker could exploit this vulnerability through the use of malicious commands. A successful exploit could allow the attacker to obtain root shell privileges on the device. Cisco Bug IDs: CSCvf20741, CSCvf60078.

The TCL shell in Cisco IOS 12.2(14)S before 12.2(14)S16, 12.2(18)S before 12.2(18)S11, and certain other releases before 25 January 2006 does not perform Authentication, Authorization, and Accounting (AAA) command authorization checks, which may allow local users to execute IOS EXEC commands that were prohibited via the AAA configuration, aka Bug ID CSCeh73049.

Certain Cisco IOS releases in 12.2S based trains with maintenance release number 25 and later, 12.3T based trains, and 12.4 based trains reuse a Tcl Shell process across login sessions of different local users on the same terminal if the first user does not use tclquit before exiting, which may cause subsequent local users to execute unintended commands or bypass AAA command authorization checks, aka Bug ID CSCef77770.

A vulnerability in the boot logic of Cisco Access Points Software could allow an authenticated, local attacker to execute unsigned code at boot time. The vulnerability is due to an improper check that is performed by the area of code that manages system startup processes. An attacker could exploit this vulnerability by modifying a specific file that is stored on the system, which would allow the attacker to bypass existing protections. A successful exploit could allow the attacker to execute unsigned code at boot time and bypass the software image verification check part of the secure boot process of an affected device. Note: To exploit this vulnerability, the attacker would need to have access to the development shell (devshell) on the device.

The Cisco AMP For Endpoints application allows an authenticated, local attacker to access a static key value stored in the local application software. The vulnerability is due to the use of a static key value stored in the application used to encrypt the connector protection password. An attacker could exploit this vulnerability by gaining local, administrative access to a Windows host and stopping the Cisco AMP for Endpoints service. Cisco Bug IDs: CSCvg42904.

A vulnerability in the restricted shell of the Cisco Identity Services Engine (ISE) that is accessible via SSH could allow an authenticated, local attacker to run arbitrary CLI commands with elevated privileges. The vulnerability is due to incomplete input validation of the user input for CLI commands issued at the restricted shell. An attacker could exploit this vulnerability by authenticating to the targeted device and executing commands that could lead to elevated privileges. An attacker would need valid user credentials to the device to exploit this vulnerability. The vulnerability affects the following Cisco Identity Services Engine (ISE) products running Release 1.4, 2.0, 2.0.1, 2.1.0: ISE, ISE Express, ISE Virtual Appliance. Cisco Bug IDs: CSCve74916.

A vulnerability in Cisco Enterprise NFV Infrastructure Software (NFVIS) could allow an authenticated, local attacker to execute arbitrary commands on the underlying operating system (OS) of an affected device as root. The vulnerability is due to insufficient input validation of a configuration file that is accessible to a local shell user. An attacker could exploit this vulnerability by including malicious input during the execution of this file. A successful exploit could allow the attacker to execute arbitrary commands on the underlying OS as root.

A vulnerability in the CLI of Cisco Unified Communications Domain Manager (Cisco Unified CDM) Software could allow an authenticated, local attacker to escape the restricted shell. The vulnerability is due to insufficient input validation of shell commands. An attacker could exploit this vulnerability by executing crafted commands in the shell. A successful exploit could allow the attacker to escape the restricted shell and access commands in the context of the restricted shell user, which does not have root privileges.

A vulnerability in the Cisco FindIT Network Management Software virtual machine (VM) images could allow an unauthenticated, local attacker who has access to the VM console to log in to the device with a static account that has root privileges. The vulnerability is due to the presence of an account with static credentials in the underlying Linux operating system. An attacker could exploit this vulnerability by logging in to the command line of the affected VM with the static account. A successful exploit could allow the attacker to log in with root-level privileges. This vulnerability affects only Cisco FindIT Network Manager and Cisco FindIT Network Probe Release 1.1.4 if these products are using Cisco-supplied VM images. No other releases or deployment models are known to be vulnerable.

A vulnerability in a specific CLI command within the local management (local-mgmt) context for Cisco UCS Fabric Interconnect Software could allow an authenticated, local attacker to gain elevated privileges as the root user on an affected device. The vulnerability is due to extraneous subcommand options present for a specific CLI command within the local-mgmt context. An attacker could exploit this vulnerability by authenticating to an affected device, entering the local-mgmt context, and issuing a specific CLI command and submitting user input. A successful exploit could allow the attacker to execute arbitrary operating system commands as root on an affected device. The attacker would need to have valid user credentials for the device.

A vulnerability in the CLI of Cisco Firepower Threat Defense (FTD) Software could allow an authenticated, local attacker to perform a command injection attack. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by injecting commands into arguments for a specific command. A successful exploit could allow the attacker to execute commands with root privileges.

A vulnerability in the filesystem management for the Cisco Nexus 9000 Series Application Centric Infrastructure (ACI) Mode Switch Software could allow an authenticated, local attacker with administrator rights to gain elevated privileges as the root user on an affected device. The vulnerability is due to overly permissive file permissions of specific system files. An attacker could exploit this vulnerability by authenticating to an affected device, creating a crafted command string, and writing this crafted string to a specific file location. A successful exploit could allow the attacker to execute arbitrary operating system commands as root on an affected device. The attacker would need to have valid administrator credentials for the device.

A vulnerability in the update service of Cisco Webex Meetings Desktop App and Cisco Webex Productivity Tools for Windows could allow an authenticated, local attacker to execute arbitrary commands as a privileged user. The vulnerability is due to insufficient validation of user-supplied parameters. An attacker could exploit this vulnerability by invoking the update service command with a crafted argument. An exploit could allow the attacker to run arbitrary commands with SYSTEM user privileges. While the CVSS Attack Vector metric denotes the requirement for an attacker to have local access, administrators should be aware that in Active Directory deployments, the vulnerability could be exploited remotely by leveraging the operating system remote management tools. This vulnerability is fixed in Cisco Webex Meetings Desktop App Release 33.6.6 and 33.9.1 releases. This vulnerability is fixed in Cisco Webex Productivity Tools Release 33.0.7.

A vulnerability in the CLI of Cisco Firepower Threat Defense (FTD) Software could allow an authenticated, local attacker to perform a command injection attack. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by injecting commands into arguments for a specific command. A successful exploit could allow the attacker to execute commands with root privileges.

A vulnerability in the Image Signature Verification feature of Cisco NX-OS Software could allow an authenticated, local attacker with administrator-level credentials to install a malicious software patch on an affected device. The vulnerability is due to improper verification of digital signatures for patch images. An attacker could exploit this vulnerability by crafting an unsigned software patch to bypass signature checks and loading it on an affected device. A successful exploit could allow the attacker to boot a malicious software patch image.

A vulnerability in the filesystem permissions of Cisco NX-OS Software could allow an authenticated, local attacker to access sensitive data that could be used to elevate their privileges to administrator. The vulnerability is due to improper implementation of filesystem permissions. An attacker could exploit this vulnerability by logging in to the CLI of an affected device, accessing a specific file, and leveraging this information to authenticate to the NX-API server. A successful exploit could allow an attacker to make configuration changes as administrator. Note: NX-API is disabled by default. Nexus 3000 Series Switches are affected in versions prior to 7.0(3)I7(4). Nexus 3500 Platform Switches are affected in versions prior to 7.0(3)I7(4). Nexus 3600 Platform Switches are affected in versions prior to 7.0(3)F3(5). Nexus 9000 Series Switches-Standalone are affected in versions prior to 7.0(3)I7(4). Nexus 9500 R-Series Line Cards and Fabric Modules are affected in versions prior to 7.0(3)F3(5).

A vulnerability in the local CLI of the Cisco SD-WAN Solution could allow an authenticated, local attacker to escalate privileges and modify device configuration files. The vulnerability exists because user input is not properly sanitized for certain commands at the CLI. An attacker could exploit this vulnerability by sending crafted commands to the CLI of an affected device. A successful exploit could allow the attacker to establish an interactive session with elevated privileges. The attacker could then use the elevated privileges to further compromise the device or obtain additional configuration data from the device.

A vulnerability in the CLI of Cisco NX-OS Software could allow an authenticated, local attacker to execute arbitrary commands on the underlying operating system of an affected device. The vulnerability is due to insufficient validation of arguments passed to certain CLI commands. An attacker could exploit this vulnerability by including malicious input as the argument of an affected command. A successful exploit could allow the attacker to execute arbitrary commands on the underlying operating system with elevated privileges. An attacker would need valid administrator credentials to exploit this vulnerability. MDS 9000 Series Multilayer Switches are affected running software versions prior to 6.2(27) and 8.2(3). Nexus 3000 Series Switches are affected running software versions prior to 7.0(3)I4(9) and 7.0(3)I7(6). Nexus 3500 Platform Switches are affected running software versions prior to 6.0(2)A8(11) and 7.0(3)I7(6). Nexus 3600 Platform Switches are affected running software versions prior to 7.0(3)F3(5). Nexus 9000 Series Switches in Standalone NX-OS Mode are affected running software versions prior to 7.0(3)I4(9), 7.0(3)I7(6). Nexus 9500 R-Series Line Cards and Fabric Modules are affected running software versions prior to 7.0(3)F3(5). Nexus 7000 and 7700 Series Switches are affected running software versions prior to 6.2(22) and 8.2(3).

A vulnerability in the Bash shell implementation for Cisco NX-OS Software could allow an authenticated, local attacker to escalate their privilege level by executing commands authorized to other user roles. The attacker must authenticate with valid user credentials. The vulnerability is due to the incorrect implementation of a Bash shell command that allows role-based access control (RBAC) to be bypassed. An attacker could exploit this vulnerability by authenticating to the device and entering a crafted command at the Bash prompt. A successful exploit could allow the attacker to escalate their privilege level by executing commands that should be restricted to other roles. For example, a dev-ops user could escalate their privilege level to admin with a successful exploit of this vulnerability.

A vulnerability in the Image Signature Verification feature of Cisco NX-OS Software could allow an authenticated, local attacker with administrator-level credentials to install a malicious software image on an affected device. The vulnerability is due to improper verification of digital signatures for software images. An attacker could exploit this vulnerability by loading an unsigned software image on an affected device. A successful exploit could allow the attacker to boot a malicious software image. Note: The fix for this vulnerability requires a BIOS upgrade as part of the software upgrade. For additional information, see the Details section of this advisory. Nexus 3000 Series Switches are affected running software versions prior to 7.0(3)I7(5). Nexus 9000 Series Fabric Switches in ACI Mode are affected running software versions prior to 13.2(1l). Nexus 9000 Series Switches in Standalone NX-OS Mode are affected running software versions prior to 7.0(3)I7(5). Nexus 9500 R-Series Line Cards and Fabric Modules are affected running software versions prior to 7.0(3)F3(5).

A vulnerability in the development shell (devshell) authentication for Cisco Aironet Series Access Points (APs) running the Cisco AP-COS operating system could allow an authenticated, local attacker to access the development shell without proper authentication, which allows for root access to the underlying Linux OS. The attacker would need valid device credentials. The vulnerability exists because the software improperly validates user-supplied input at the CLI authentication prompt for development shell access. An attacker could exploit this vulnerability by authenticating to the device and entering crafted input at the CLI. A successful exploit could allow the attacker to access the AP development shell without proper authentication, which allows for root access to the underlying Linux OS. Software versions prior to 8.3.150.0, 8.5.135.0, and 8.8.100.0 are affected.

A vulnerability in a specific CLI command implementation of Cisco Nexus 9000 Series ACI Mode Switch Software could allow an authenticated, local attacker to escape a restricted shell on an affected device. The vulnerability is due to insufficient sanitization of user-supplied input when issuing a specific CLI command with parameters on an affected device. An attacker could exploit this vulnerability by authenticating to the device CLI and issuing certain commands. A successful exploit could allow the attacker to escape the restricted shell and execute arbitrary commands with root-level privileges on the affected device. This vulnerability only affects Cisco Nexus 9000 Series ACI Mode Switches that are running a release prior to 14.0(3d).

A vulnerability in the controller authorization functionality of Cisco Nexus 9000 Series ACI Mode Switch Software could allow an authenticated, local attacker to escalate standard users with root privilege on an affected device. The vulnerability is due to a misconfiguration of certain sudoers files for the bashroot component on an affected device. An attacker could exploit this vulnerability by authenticating to the affected device with a crafted user ID, which may allow temporary administrative access to escalate privileges. A successful exploit could allow the attacker to escalate privileges on an affected device. This Vulnerability has been fixed in version 4.0(1h)

A vulnerability in the filesystem permissions of Cisco NX-OS Software could allow an authenticated, local attacker to gain read and write access to a critical configuration file. The vulnerability is due to a failure to impose strict filesystem permissions on the targeted device. An attacker could exploit this vulnerability by accessing and modifying restricted files. A successful exploit could allow an attacker to use the content of this configuration file to bypass authentication and log in as any user of the device. MDS 9000 Series Multilayer Switches are affected in versions prior to 6.2(25), 8.1(1b), and 8.3(1). Nexus 3000 Series Switches are affected in versions prior to 7.0(3)I4(9) and 7.0(3)I7(4). Nexus 3500 Platform Switches are affected in versions prior to 6.0(2)A8(10) and 7.0(3)I7(4). Nexus 3600 Platform Switches are affected in versions prior to 7.0(3)F3(5). Nexus 2000, 5500, 5600, and 6000 Series Switches are affected in versions prior to 7.1(5)N1(1b) and 7.3(3)N1(1). Nexus 7000 and 7700 Series Switches are affected in versions prior to 6.2(22), 7.3(3)D1(1), and 8.2(3). Nexus 9000 Series Switches-Standalone are affected in versions prior to 7.0(3)I4(9) and 7.0(3)I7(4). Nexus 9500 R-Series Line Cards and Fabric Modules are affected in versions prior to 7.0(3)F3(5).

A vulnerability in the Tetration Analytics agent for Cisco Nexus 9000 Series Switches in standalone NX-OS mode could allow an authenticated, local attacker to execute arbitrary code as root. The vulnerability is due to an incorrect permissions setting. An attacker could exploit this vulnerability by replacing valid agent files with malicious code. A successful exploit could result in the execution of code supplied by the attacker. Nexus 9000 Series Switches in Standalone NX-OS Mode are affected running versions prior to 7.0(3)I7(5).

Cisco SN 5420 Storage Router 1.1(3) and earlier allows local users to access a developer's shell without a password and execute certain restricted commands without being logged.

A vulnerability in the filesystem of Cisco IOS XE Software could allow an authenticated, local attacker within the IOx Guest Shell to modify the namespace container protections on an affected device. The vulnerability is due to insufficient file permissions. An attacker could exploit this vulnerability by modifying files that they should not have access to. A successful exploit could allow the attacker to remove container protections and perform file actions outside the namespace of the container.

A vulnerability in the Bash shell implementation for Cisco NX-OS Software could allow an authenticated, local attacker to escalate their privilege level to root. The attacker must authenticate with valid user credentials. The vulnerability is due to incorrect permissions of a system executable. An attacker could exploit this vulnerability by authenticating to the device and entering a crafted command at the Bash prompt. A successful exploit could allow the attacker to escalate their privilege level to root. Nexus 3000 Series Switches are affected in versions prior to 7.0(3)I7(4). Nexus 3500 Platform Switches are affected in versions prior to 7.0(3)I7(4). Nexus 3600 Platform Switches are affected in versions prior to 7.0(3)F3(5). Nexus 9000 Series Switches in Standalone NX-OS Mode are affected in versions prior to 7.0(3)I7(4). Nexus 9500 R-Series Line Cards and Fabric Modules are affected in versions prior to 7.0(3)F3(5).

A vulnerability in the CLI of Cisco SD-WAN Solution could allow an authenticated, local attacker to elevate lower-level privileges to the root user on an affected device. The vulnerability is due to insufficient authorization enforcement. An attacker could exploit this vulnerability by authenticating to the targeted device and executing commands that could lead to elevated privileges. A successful exploit could allow the attacker to make configuration changes to the system as the root user.

A vulnerability in the CLI of Cisco NX-OS Software could allow an authenticated, local attacker to escalate lower-level privileges to the administrator level. The vulnerability is due to insufficient authorization enforcement. An attacker could exploit this vulnerability by authenticating to the targeted device and executing commands that could lead to elevated privileges. A successful exploit could allow an attacker to make configuration changes to the system as administrator. Nexus 3000 Series Switches are affected in versions prior to 7.0(3)I7(4). Nexus 3500 Platform Switches are affected in versions prior to 7.0(3)I7(4). Nexus 3600 Platform Switches are affected in versions prior to 7.0(3)F3(5). Nexus 9000 Series Switches-Standalone are affected in versions prior to 7.0(3)I7(4). Nexus 9500 R-Series Line Cards and Fabric Modules are affected in versions prior to 7.0(3)F3(5).

A vulnerability in Cisco IOS XR Software could allow an authenticated, local attacker to log in to the device with the privileges of the root user. More Information: CSCva38434. Known Affected Releases: 6.1.1.BASE.

A vulnerability in Cisco AnyConnect Secure Mobility Client for Windows could allow an authenticated, local attacker to install and execute an arbitrary executable file with privileges equivalent to the Microsoft Windows operating system SYSTEM account. More Information: CSCvb68043. Known Affected Releases: 4.3(2039) 4.3(748). Known Fixed Releases: 4.3(4019) 4.4(225).

A vulnerability in Cisco IOS ROM Monitor (ROMMON) Software for Cisco Catalyst 6800 Series Switches could allow an unauthenticated, local attacker to bypass Cisco Secure Boot validation checks and load a compromised software image on an affected device. The vulnerability is due to the presence of a hidden command in the affected software. An attacker could exploit this vulnerability by connecting to an affected device via the console, forcing the device into ROMMON mode, and writing a malicious pattern to a specific memory address on the device. A successful exploit could allow the attacker to bypass signature validation checks by Cisco Secure Boot technology and load a compromised software image on the affected device. A compromised software image is any software image that has not been digitally signed by Cisco.

A vulnerability in the DLL loading component of Cisco Advanced Malware Protection (AMP) for Endpoints on Windows could allow an authenticated, local attacker to disable system scanning services or take other actions to prevent detection of unauthorized intrusions. To exploit this vulnerability, the attacker would need to have administrative credentials on the Windows system. The vulnerability is due to the improper validation of resources loaded by a system process at run time. An attacker could exploit this vulnerability by crafting a malicious DLL file and placing it in a specific location on the targeted system. A successful exploit could allow the attacker to disable the targeted system's scanning services and ultimately prevent the system from being protected from further intrusion. There are no workarounds that address this vulnerability.

A vulnerability in Cisco Smart Software Manager Satellite could allow an authenticated, local attacker to access sensitive information on an affected system. The vulnerability is due to insufficient protection of static credentials in the affected software. An attacker could exploit this vulnerability by gaining access to the static credential that is stored on the local device. A successful exploit could allow the attacker to view static credentials, which the attacker could use to carry out further attacks.

A vulnerability in the Enable Secret feature of Cisco Nexus 3000 Series Switches and Cisco Nexus 9000 Series Switches in standalone NX-OS mode could allow an authenticated, local attacker to issue the enable command and get full administrative privileges. To exploit this vulnerability, the attacker would need to have valid credentials for the affected device. The vulnerability is due to a logic error in the implementation of the enable command. An attacker could exploit this vulnerability by logging in to the device and issuing the enable command. A successful exploit could allow the attacker to gain full administrative privileges without using the enable password. Note: The Enable Secret feature is disabled by default.

UCS Manager and UCS 6200 Fabric Interconnects in Cisco Unified Computing System (UCS) through 3.0(2d) allow local users to obtain OS root access via crafted CLI input, aka Bug ID CSCuz91263.

Cisco Firepower Management Center 6.0.1 has hardcoded database credentials, which allows local users to obtain sensitive information by leveraging CLI access, aka Bug ID CSCva30370.

The installation procedure on Cisco Application Policy Infrastructure Controller (APIC) devices 1.3(2f) mishandles binary files, which allows local users to obtain root access via unspecified vectors, aka Bug ID CSCva50496.

Cisco AnyConnect Secure Mobility Client before 4.2.05015 and 4.3.x before 4.3.02039 mishandles pathnames, which allows local users to gain privileges via a crafted INF file, aka Bug ID CSCuz92464.

A vulnerability in the command-line interface of the Cisco IP Interoperability and Collaboration System (IPICS) could allow an authenticated, local attacker to elevate the privilege level associated with their session. More Information: CSCva38636. Known Affected Releases: 4.10(1). Known Fixed Releases: 5.0(1).

The Windows Logon installer prior to 4.1.2 did not properly validate file installation paths. This allows an attacker with local user privileges to coerce the installer to write to arbitrary privileged directories. If successful, an attacker can manipulate files used by Windows Logon, cause Denial of Service (DoS) by deleting file(s), or replace system files to potentially achieve elevation of privileges. Note that this can only exploitable during new installations while the installer is running and is not exploitable once installation is finished. Versions 4.1.2 of Windows Logon addresses this issue.

iox in Cisco IOS, possibly 15.6 and earlier, and IOS XE, possibly 3.18 and earlier, allows local users to execute arbitrary IOx Linux commands on the guest OS via crafted iox command-line options, aka Bug ID CSCuz59223.

A vulnerability in the installation procedure of the Cisco Hybrid Media Service could allow an authenticated, local attacker to elevate privileges to the root level. More Information: CSCvb81344. Known Affected Releases: 1.0.

A vulnerability in the system management of certain FireAMP system processes in Cisco FireAMP Connector Endpoint software could allow an authenticated, local attacker to stop certain protected FireAMP processes without requiring a password. Stopping certain critical processes could cause a denial of service (DoS) condition, and certain security features could no longer be available. More Information: CSCvb40597. Known Affected Releases: 1.

A vulnerability in the CLI of Cisco SD-WAN Solution software could allow an authenticated, local attacker to inject arbitrary commands that are executed with root privileges. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by authenticating to the device and submitting crafted input to the CLI utility. The attacker must be authenticated to access the CLI utility. A successful exploit could allow the attacker to execute commands with root privileges.

A vulnerability in the local management (local-mgmt) CLI of Cisco UCS Manager Software could allow an authenticated, local attacker to execute arbitrary commands on the underlying operating system (OS) on an affected device. The vulnerability is due to insufficient input validation of command arguments. An attacker could exploit this vulnerability by including crafted arguments to specific commands on the local management CLI. A successful exploit could allow the attacker to execute arbitrary commands on the underlying OS with the privileges of the currently logged-in user for all affected platforms excluding Cisco UCS 6400 Series Fabric Interconnects. On Cisco UCS 6400 Series Fabric Interconnects, the injected commands are executed with root privileges.

Multiple vulnerabilities in the secure boot process of Cisco Adaptive Security Appliance (ASA) Software and Firepower Threat Defense (FTD) Software for the Firepower 1000 Series and Firepower 2100 Series Appliances could allow an authenticated, local attacker to bypass the secure boot mechanism. The vulnerabilities are due to insufficient protections of the secure boot process. An attacker could exploit these vulnerabilities by injecting code into specific files that are then referenced during the device boot process. A successful exploit could allow the attacker to break the chain of trust and inject code into the boot process of the device, which would be executed at each boot and maintain persistence across reboots.