A vulnerability in role-based access control (RBAC) for Cisco NX-OS Software could allow an authenticated, remote attacker to execute CLI commands that should be restricted for a nonadministrative user. The attacker would have to possess valid user credentials for the device. The vulnerability is due to incorrect RBAC privilege assignment for certain CLI commands. An attacker could exploit this vulnerability by authenticating to a device as a nonadministrative user and executing specific commands from the CLI. An exploit could allow the attacker to run commands that should be restricted to administrative users. These commands could modify the configuration or boot image on the device. This vulnerability affects MDS 9000 Series Multilayer Switches, Nexus 2000 Series Switches, Nexus 3000 Series Switches, Nexus 3500 Platform Switches, Nexus 3600 Platform Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Nexus 9000 Series Switches in standalone NX-OS mode, Nexus 9500 R-Series Line Cards and Fabric Modules. Cisco Bug IDs: CSCvd77904.

A vulnerability in the role-based resource checking functionality of the Cisco Unified Computing System (UCS) Director could allow an authenticated, remote attacker to view unauthorized information for any virtual machine in the UCS Director end-user portal and perform any permitted operations on any virtual machine. The permitted operations can be configured for the end user on the virtual machines with either of the following settings: The virtual machine is associated to a Virtual Data Center (VDC) that has an end user self-service policy attached to the VDC. The end user role has VM Management Actions settings configured under User Permissions. This is a global configuration, so all the virtual machines visible in the end-user portal will have the VM management actions available. The vulnerability is due to improper user authentication checks. An attacker could exploit this vulnerability by logging in to the UCS Director with a modified username and valid password. A successful exploit could allow the attacker to gain visibility into and perform actions against all virtual machines in the UCS Director end-user portal of the affected system. This vulnerability affects Cisco Unified Computing System (UCS) Director releases 6.0 and 6.5 prior to patch 3 that are in a default configuration. Cisco Bug IDs: CSCvh53501.

A vulnerability in the Cisco IOS XE Software REST API could allow an authenticated, remote attacker to bypass API authorization checks and use the API to perform privileged actions on an affected device. The vulnerability is due to insufficient authorization checks for requests that are sent to the REST API of the affected software. An attacker could exploit this vulnerability by sending a malicious request to an affected device via the REST API. A successful exploit could allow the attacker to selectively bypass authorization checks for the REST API of the affected software and use the API to perform privileged actions on an affected device. Cisco Bug IDs: CSCuz56428.

A vulnerability in the process of uploading new application images to Cisco FXOS on the Cisco Firepower 4100 Series Next-Generation Firewall (NGFW) and Firepower 9300 Security Appliance could allow an authenticated, remote attacker using path traversal techniques to create or overwrite arbitrary files on an affected device. The vulnerability is due to insufficient validation during the application image upload process. An attacker could exploit this vulnerability by creating an application image containing malicious code and installing the image on the affected device using the CLI or web-based user interface (web UI). These actions occur prior to signature verification and could allow the attacker to create and execute arbitrary code with root privileges. Note: A missing or invalid signature in the application image will cause the upload process to fail, but does not prevent the exploit. Cisco Bug IDs: CSCvc21901.

Unspecified vulnerability in Cisco Wireless Control System (WCS) before 4.0.87.0 allows remote authenticated users to gain the privileges of the SuperUsers group, and manage the application and its networks, related to the group membership of user accounts, aka Bug ID CSCsg05190.

The web framework in Cisco Prime Collaboration Assurance before 10.5.1.53684-1 allows remote authenticated users to bypass intended access restrictions, and create administrative accounts or read data from arbitrary tenant domains, via a crafted URL, aka Bug IDs CSCus62671 and CSCus62652.

The web framework in Cisco TelePresence Advanced Media Gateway Series Software before 1.1(1.40), Cisco TelePresence IP Gateway Series Software, Cisco TelePresence IP VCR Series Software before 3.0(1.27), Cisco TelePresence ISDN Gateway Software before 2.2(1.94), Cisco TelePresence MCU Software before 4.4(3.54) and 4.5 before 4.5(1.45), Cisco TelePresence MSE Supervisor Software before 2.3(1.38), Cisco TelePresence Serial Gateway Series Software before 1.0(1.42), Cisco TelePresence Server Software for Hardware before 3.1(1.98), and Cisco TelePresence Server Software for Virtual Machine before 4.1(1.79) allows remote authenticated users to execute arbitrary commands with root privileges via unspecified vectors, aka Bug IDs CSCul55968, CSCur08993, CSCur15803, CSCur15807, CSCur15825, CSCur15832, CSCur15842, CSCur15850, and CSCur15855.

The web framework in Cisco Prime Collaboration Provisioning before 11.0 allows remote authenticated users to bypass intended access restrictions and create administrative accounts via a crafted URL, aka Bug ID CSCut64111.

Cisco Application Policy Infrastructure Controller (APIC) devices with software before 1.0(3o) and 1.1 before 1.1(1j) and Nexus 9000 ACI devices with software before 11.0(4o) and 11.1 before 11.1(1j) do not properly restrict access to the APIC filesystem, which allows remote authenticated users to obtain root privileges via unspecified use of the APIC cluster-management configuration feature, aka Bug IDs CSCuu72094 and CSCuv11991.

A vulnerability in the ConfD CLI of Cisco Elastic Services Controllers could allow an authenticated, remote attacker to run arbitrary commands as the Linux tomcat user on an affected system. More Information: CSCvc76620. Known Affected Releases: 2.2(9.76).

A vulnerability in the esc_listener.py script of Cisco Elastic Services Controllers could allow an authenticated, remote attacker to execute arbitrary commands as the tomcat user on an affected system, aka an Authentication Request Processing Arbitrary Command Execution Vulnerability. More Information: CSCvc76642. Known Affected Releases: 2.2(9.76).

A vulnerability in Cisco Elastic Services Controllers could allow an authenticated, remote attacker to log in to an affected system as the Linux admin user, aka an Insecure Default Credentials Vulnerability. More Information: CSCvc76651. Known Affected Releases: 21.0.0.

A vulnerability in Cisco Ultra Services Framework Element Manager could allow an authenticated, remote attacker to log in to the device with the privileges of the root user, aka an Insecure Default Account Information Vulnerability. More Information: CSCvd85710. Known Affected Releases: 21.0.v0.65839.

The Simple Network Management Protocol (SNMP) subsystem of Cisco IOS and IOS XE Software contains multiple vulnerabilities that could allow an authenticated, remote attacker to remotely execute code on an affected system or cause an affected system to reload. An attacker could exploit these vulnerabilities by sending a crafted SNMP packet to an affected system via IPv4 or IPv6. Only traffic directed to an affected system can be used to exploit these vulnerabilities. The vulnerabilities are due to a buffer overflow condition in the SNMP subsystem of the affected software. The vulnerabilities affect all versions of SNMP - Versions 1, 2c, and 3. To exploit these vulnerabilities via SNMP Version 2c or earlier, the attacker must know the SNMP read-only community string for the affected system. To exploit these vulnerabilities via SNMP Version 3, the attacker must have user credentials for the affected system. A successful exploit could allow the attacker to execute arbitrary code and obtain full control of the affected system or cause the affected system to reload. Customers are advised to apply the workaround as contained in the Workarounds section below. Fixed software information is available via the Cisco IOS Software Checker. All devices that have enabled SNMP and have not explicitly excluded the affected MIBs or OIDs should be considered vulnerable. There are workarounds that address these vulnerabilities.

A vulnerability in the SNMP implementation of could allow an authenticated, remote attacker to cause a reload of the affected system or to remotely execute code. An attacker could exploit this vulnerability by sending a crafted SNMP packet to the affected device.  The vulnerability is due to a buffer overflow in the affected code area. The vulnerability affects all versions of SNMP (versions 1, 2c, and 3). The attacker must know the SNMP read only community string (SNMP version 2c or earlier) or the user credentials (SNMPv3). An exploit could allow the attacker to execute arbitrary code and obtain full control of the system or to cause a reload of the affected system. Only traffic directed to the affected system can be used to exploit this vulnerability.

A vulnerability in the SNMP implementation of could allow an authenticated, remote attacker to cause a reload of the affected system or to remotely execute code. An attacker could exploit this vulnerability by sending a crafted SNMP packet to the affected device.  The vulnerability is due to a buffer overflow in the affected code area. The vulnerability affects all versions of SNMP (versions 1, 2c, and 3). The attacker must know the SNMP read only community string (SNMP version 2c or earlier) or the user credentials (SNMPv3). An exploit could allow the attacker to execute arbitrary code and obtain full control of the system or to cause a reload of the affected system. Only traffic directed to the affected system can be used to exploit this vulnerability.

Cisco NX-OS 4.0 through 7.3 on Multilayer Director and Nexus 1000V, 2000, 3000, 3500, 4000, 5000, 5500, 5600, 6000, 7000, 7700, and 9000 devices allows remote authenticated users to bypass intended AAA restrictions and obtain privileged CLI access via crafted parameters in an SSH connection negotiation, aka Bug IDs CSCum35502, CSCuw78669, CSCuw79754, and CSCux88492.

A vulnerability in the web management interface of Cisco Prime Collaboration Provisioning (PCP) could allow an authenticated, remote attacker to modify sensitive data that is associated with arbitrary accounts on an affected device. The vulnerability is due to a failure to enforce access restrictions on the Help Desk and User Provisioning roles that are assigned to authenticated users. This failure could allow an authenticated attacker to modify critical attributes of higher-privileged accounts on the device. A successful exploit could allow the attacker to gain elevated privileges on the device. This vulnerability affects Cisco Prime Collaboration Provisioning (PCP) Releases 12.1 and prior. Cisco Bug IDs: CSCvd61779.

A vulnerability in the SNMP implementation of could allow an authenticated, remote attacker to cause a reload of the affected system or to remotely execute code. An attacker could exploit this vulnerability by sending a crafted SNMP packet to the affected device.  The vulnerability is due to a buffer overflow in the affected code area. The vulnerability affects all versions of SNMP (versions 1, 2c, and 3). The attacker must know the SNMP read only community string (SNMP version 2c or earlier) or the user credentials (SNMPv3). An exploit could allow the attacker to execute arbitrary code and obtain full control of the system or to cause a reload of the affected system. Only traffic directed to the affected system can be used to exploit this vulnerability.

A vulnerability in the SNMP implementation of could allow an authenticated, remote attacker to cause a reload of the affected system or to remotely execute code. An attacker could exploit this vulnerability by sending a crafted SNMP packet to the affected device.  The vulnerability is due to a buffer overflow in the affected code area. The vulnerability affects all versions of SNMP (versions 1, 2c, and 3). The attacker must know the SNMP read only community string (SNMP version 2c or earlier) or the user credentials (SNMPv3). An exploit could allow the attacker to execute arbitrary code and obtain full control of the system or to cause a reload of the affected system. Only traffic directed to the affected system can be used to exploit this vulnerability.

A vulnerability in Cisco Ultra Services Framework Element Manager could allow an authenticated, remote attacker with access to the management network to log in as an admin or oper user of the affected device, aka an Insecure Default Credentials Vulnerability. More Information: CSCvc76699. Known Affected Releases: 21.0.0.

A vulnerability in Cisco Ultra Services Framework Staging Server could allow an authenticated, remote attacker with access to the management network to log in as an admin user of the affected device, aka an Insecure Default Credentials Vulnerability. More Information: CSCvc76681. Known Affected Releases: 21.0.0.

A vulnerability in the ConfD CLI of Cisco Elastic Services Controllers could allow an authenticated, remote attacker to log in to an affected system as the admin user, aka an Insecure Default Administrator Credentials Vulnerability. More Information: CSCvc76661. Known Affected Releases: 2.2(9.76).

A vulnerability in Cisco Elastic Services Controllers could allow an authenticated, remote attacker to log in to an affected system as the Linux root user, aka an Insecure Default Password Vulnerability. More Information: CSCvc76631. Known Affected Releases: 2.2(9.76).

The Simple Network Management Protocol (SNMP) subsystem of Cisco IOS and IOS XE Software contains multiple vulnerabilities that could allow an authenticated, remote attacker to remotely execute code on an affected system or cause an affected system to reload. An attacker could exploit these vulnerabilities by sending a crafted SNMP packet to an affected system via IPv4 or IPv6. Only traffic directed to an affected system can be used to exploit these vulnerabilities. The vulnerabilities are due to a buffer overflow condition in the SNMP subsystem of the affected software. The vulnerabilities affect all versions of SNMP - Versions 1, 2c, and 3. To exploit these vulnerabilities via SNMP Version 2c or earlier, the attacker must know the SNMP read-only community string for the affected system. To exploit these vulnerabilities via SNMP Version 3, the attacker must have user credentials for the affected system. A successful exploit could allow the attacker to execute arbitrary code and obtain full control of the affected system or cause the affected system to reload. Customers are advised to apply the workaround as contained in the Workarounds section below. Fixed software information is available via the Cisco IOS Software Checker. All devices that have enabled SNMP and have not explicitly excluded the affected MIBs or OIDs should be considered vulnerable. There are workarounds that address these vulnerabilities.

A vulnerability in Cisco Ultra Services Framework Element Manager could allow an authenticated, remote attacker with access to the management network to log in to the affected device using default credentials present on the system, aka an Insecure Default Password Vulnerability. More Information: CSCvc76695. Known Affected Releases: 21.0.0.

The Simple Network Management Protocol (SNMP) subsystem of Cisco IOS and IOS XE Software contains multiple vulnerabilities that could allow an authenticated, remote attacker to remotely execute code on an affected system or cause an affected system to reload. An attacker could exploit these vulnerabilities by sending a crafted SNMP packet to an affected system via IPv4 or IPv6. Only traffic directed to an affected system can be used to exploit these vulnerabilities. The vulnerabilities are due to a buffer overflow condition in the SNMP subsystem of the affected software. The vulnerabilities affect all versions of SNMP - Versions 1, 2c, and 3. To exploit these vulnerabilities via SNMP Version 2c or earlier, the attacker must know the SNMP read-only community string for the affected system. To exploit these vulnerabilities via SNMP Version 3, the attacker must have user credentials for the affected system. A successful exploit could allow the attacker to execute arbitrary code and obtain full control of the affected system or cause the affected system to reload. Customers are advised to apply the workaround as contained in the Workarounds section below. Fixed software information is available via the Cisco IOS Software Checker. All devices that have enabled SNMP and have not explicitly excluded the affected MIBs or OIDs should be considered vulnerable. There are workarounds that address these vulnerabilities.

The Simple Network Management Protocol (SNMP) subsystem of Cisco IOS and IOS XE Software contains multiple vulnerabilities that could allow an authenticated, remote attacker to remotely execute code on an affected system or cause an affected system to reload. An attacker could exploit these vulnerabilities by sending a crafted SNMP packet to an affected system via IPv4 or IPv6. Only traffic directed to an affected system can be used to exploit these vulnerabilities. The vulnerabilities are due to a buffer overflow condition in the SNMP subsystem of the affected software. The vulnerabilities affect all versions of SNMP - Versions 1, 2c, and 3. To exploit these vulnerabilities via SNMP Version 2c or earlier, the attacker must know the SNMP read-only community string for the affected system. To exploit these vulnerabilities via SNMP Version 3, the attacker must have user credentials for the affected system. A successful exploit could allow the attacker to execute arbitrary code and obtain full control of the affected system or cause the affected system to reload. Customers are advised to apply the workaround as contained in the Workarounds section below. Fixed software information is available via the Cisco IOS Software Checker. All devices that have enabled SNMP and have not explicitly excluded the affected MIBs or OIDs should be considered vulnerable. There are workarounds that address these vulnerabilities.

A vulnerability in certain commands of Cisco Elastic Services Controller could allow an authenticated, remote attacker to elevate privileges to root and run dangerous commands on the server. The vulnerability occurs because a "tomcat" user on the system can run certain shell commands, allowing the user to overwrite any file on the filesystem and elevate privileges to root. This vulnerability affects Cisco Elastic Services Controller prior to releases 2.3.1.434 and 2.3.2. Cisco Bug IDs: CSCvc76634.

The server in Cisco Unity Connection 9.1(1) and 9.1(2) allows remote authenticated users to obtain privileged access by conducting an "HTTP Intercept" attack and leveraging the ability to read files within the context of the web-server user account, aka Bug ID CSCup41014.

The VPN implementation in Cisco ASA Software 7.2 before 7.2(5.15), 8.2 before 8.2(5.51), 8.3 before 8.3(2.42), 8.4 before 8.4(7.23), 8.6 before 8.6(1.15), 9.0 before 9.0(4.24), 9.1 before 9.1(5.12), 9.2 before 9.2(2.6), and 9.3 before 9.3(1.1) does not properly implement a tunnel filter, which allows remote authenticated users to obtain failover-unit access via crafted packets, aka Bug ID CSCuq28582.

The Administration GUI in the web framework in Cisco Unified Communications Domain Manager (CDM) in Unified CDM Application Software before 8.1.4 does not properly implement access control, which allows remote authenticated users to modify administrative credentials via a crafted URL, aka Bug ID CSCun49862.

The network-diagnostics administration interface in the Cisco RV router firmware on RV220W devices, before 1.0.5.9 on RV120W devices, and before 1.0.4.14 on RV180 and RV180W devices allows remote authenticated users to execute arbitrary commands via a crafted HTTP request, aka Bug ID CSCuh87126.

A vulnerability in Common Internet Filesystem (CIFS) code in the Clientless SSL VPN functionality of Cisco ASA Software, Major Releases 9.0-9.6, could allow an authenticated, remote attacker to cause a heap overflow. The vulnerability is due to insufficient validation of user supplied input. An attacker could exploit this vulnerability by sending a crafted URL to the affected system. An exploit could allow the remote attacker to cause a reload of the affected system or potentially execute code. Note: Only traffic directed to the affected system can be used to exploit this vulnerability. This vulnerability affects systems configured in routed firewall mode only and in single or multiple context mode. This vulnerability can be triggered by IPv4 or IPv6 traffic. A valid TCP connection is needed to perform the attack. The attacker needs to have valid credentials to log in to the Clientless SSL VPN portal. Vulnerable Cisco ASA Software running on the following products may be affected by this vulnerability: Cisco ASA 5500 Series Adaptive Security Appliances, Cisco ASA 5500-X Series Next-Generation Firewalls, Cisco Adaptive Security Virtual Appliance (ASAv), Cisco ASA for Firepower 9300 Series, Cisco ASA for Firepower 4100 Series. Cisco Bug IDs: CSCvc23838.

The RMI interface in Cisco Secure Access Control System (ACS) 5.x before 5.5 does not properly enforce authorization requirements, which allows remote authenticated users to obtain superadmin access via a request to this interface, aka Bug ID CSCud75180.

A vulnerability in the sponsor portal of Cisco Identity Services Engine (ISE) could allow an authenticated, remote attacker to access notices owned by other users, because of SQL Injection. More Information: CSCvb15627. Known Affected Releases: 1.4(0.908).

Cisco TelePresence TC Software 4.x and 5.x before 5.1.7 and 6.x before 6.0.1 and TE Software 4.x and 6.0 allow remote authenticated users to execute arbitrary commands by using the commands as arguments to tshell (aka tcsh) scripts, aka Bug ID CSCue60202.

The web framework in Cisco Identity Services Engine (ISE) 1.0 and 1.1.0 before 1.1.0.665-5, 1.1.1 before 1.1.1.268-7, 1.1.2 before 1.1.2.145-10, 1.1.3 before 1.1.3.124-7, 1.1.4 before 1.1.4.218-7, and 1.2 before 1.2.0.899-2 allows remote authenticated users to execute arbitrary commands via a crafted session on TCP port 443, aka Bug ID CSCuh81511.

The web framework in IronPort AsyncOS on Cisco Web Security Appliance devices before 7.1.3-013, 7.5 before 7.5.0-838, and 7.7 before 7.7.0-550 allows remote authenticated users to execute arbitrary commands via crafted command-line input in a URL sent over IPv4, aka Bug ID CSCzv69294.

The web framework in Cisco WAAS Software before 4.x and 5.x before 5.0.3e, 5.1.x before 5.1.1c, and 5.2.x before 5.2.1; Cisco ACNS Software 4.x and 5.x before 5.5.29.2; Cisco ECDS Software 2.x before 2.5.6; Cisco CDS-IS Software 2.x before 2.6.3.b50 and 3.1.x before 3.1.2b54; Cisco VDS-IS Software 3.2.x before 3.2.1.b9; Cisco VDS-SB Software 1.x before 1.1.0-b96; Cisco VDS-OE Software 1.x before 1.0.1; and Cisco VDS-OS Software 1.x in central-management mode allows remote authenticated users to execute arbitrary commands by appending crafted strings to values in GUI fields, aka Bug IDs CSCug40609, CSCug48855, CSCug48921, CSCug48872, CSCuh21103, CSCuh21020, and CSCug56790.

Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to execute arbitrary code or cause an affected device to restart unexpectedly. The vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to an affected device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system or cause the device to reload, resulting in a denial of service (DoS) condition. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on the affected device. Cisco has not released software updates that address these vulnerabilities.

A vulnerability in the batch provisioning feature of Cisco Prime Collaboration Provisioning could allow an authenticated, remote attacker to escalate privileges to the Administrator level. The vulnerability is due to insufficient authorization enforcement on batch processing. An attacker could exploit this vulnerability by uploading a batch file and having the batch file processed by the system. A successful exploit could allow the attacker to escalate privileges to the Administrator level. Cisco Bug IDs: CSCvd86578.

A vulnerability in the Redfish protocol of Cisco Integrated Management Controller (IMC) could allow an authenticated, remote attacker to inject and execute arbitrary commands with root privileges on an affected device. The vulnerability is due to insufficient validation of user-supplied input by the affected software. An attacker could exploit this vulnerability by sending crafted authenticated commands to the web-based management interface of the affected software. A successful exploit could allow the attacker to inject and execute arbitrary commands on an affected device with root privileges.

A vulnerability in the web-based management interface of Cisco Integrated Management Controller (IMC) Software could allow an authenticated, remote attacker to inject arbitrary commands that are executed with root privileges on an affected device. The vulnerability is due to insufficient validation of user-supplied input by the affected software. An attacker could exploit this vulnerability by invoking an interface monitoring mechanism with a crafted argument on the affected software. A successful exploit could allow the attacker to inject and execute arbitrary, system-level commands with root privileges on an affected device.

A vulnerability in the web-based management interface of Cisco Adaptive Security Appliance (ASA) Software could allow an authenticated, remote attacker to elevate privileges and execute administrative functions on an affected device. The vulnerability is due to insufficient authorization validation. An attacker could exploit this vulnerability by logging in to an affected device as a low-privileged user and then sending specific HTTPS requests to execute administrative functions using the information retrieved during initial login.

A vulnerability in the web server of Cisco Integrated Management Controller (IMC) could allow an authenticated, remote attacker to set sensitive configuration values and gain elevated privileges. The vulnerability is due to improper handling of substring comparison operations that are performed by the affected software. An attacker could exploit this vulnerability by sending a crafted HTTP request to the affected software. A successful exploit could allow the attacker with read-only privileges to gain administrator privileges.

The web framework in IronPort AsyncOS on Cisco Web Security Appliance devices before 7.1.3-013, 7.5 before 7.5.0-838, and 7.7 before 7.7.0-550; Email Security Appliance devices before 7.1.5-104, 7.3 before 7.3.2-026, 7.5 before 7.5.2-203, and 7.6 before 7.6.3-019; and Content Security Management Appliance devices before 7.2.2-110, 7.7 before 7.7.0-213, and 7.8 and 7.9 before 7.9.1-102 allows remote authenticated users to execute arbitrary commands via crafted command-line input in a URL, aka Bug IDs CSCzv85726, CSCzv44633, and CSCzv24579.

The Simple Network Management Protocol (SNMP) subsystem of Cisco IOS and IOS XE Software contains multiple vulnerabilities that could allow an authenticated, remote attacker to remotely execute code on an affected system or cause an affected system to reload. An attacker could exploit these vulnerabilities by sending a crafted SNMP packet to an affected system via IPv4 or IPv6. Only traffic directed to an affected system can be used to exploit these vulnerabilities. The vulnerabilities are due to a buffer overflow condition in the SNMP subsystem of the affected software. The vulnerabilities affect all versions of SNMP - Versions 1, 2c, and 3. To exploit these vulnerabilities via SNMP Version 2c or earlier, the attacker must know the SNMP read-only community string for the affected system. To exploit these vulnerabilities via SNMP Version 3, the attacker must have user credentials for the affected system. A successful exploit could allow the attacker to execute arbitrary code and obtain full control of the affected system or cause the affected system to reload. Customers are advised to apply the workaround as contained in the Workarounds section below. Fixed software information is available via the Cisco IOS Software Checker. All devices that have enabled SNMP and have not explicitly excluded the affected MIBs or OIDs should be considered vulnerable. There are workarounds that address these vulnerabilities.

The administrative web interface on Cisco TelePresence Recording Server before 1.8.0 allows remote authenticated users to execute arbitrary commands via unspecified vectors, aka Bug ID CSCth85804.

A vulnerability in the vContainer of the Cisco SD-WAN Solution could allow an authenticated, remote attacker to cause a denial of service (DoS) condition and execute arbitrary code as the root user. The vulnerability is due to improper bounds checking by the vContainer. An attacker could exploit this vulnerability by sending a malicious file to an affected vContainer instance. A successful exploit could allow the attacker to cause a buffer overflow condition on the affected vContainer, which could result in a DoS condition that the attacker could use to execute arbitrary code as the root user.