In ImageMagick 7.0.6-1, a memory exhaustion vulnerability was found in the function ReadMIFFImage in coders/miff.c, which allows attackers to cause a denial of service.

In ImageMagick 7.0.6-1, a memory exhaustion vulnerability was found in the function ReadSUNImage in coders/sun.c, which allows attackers to cause a denial of service.

In version 0.3.32 of open-webui/open-webui, the absence of authentication mechanisms allows any unauthenticated attacker to access the `api/v1/utils/code/format` endpoint. If a malicious actor sends a POST request with an excessively high volume of content, the server could become completely unresponsive. This could lead to severe performance issues, causing the server to become unresponsive or experience significant degradation, ultimately resulting in service interruptions for legitimate users.

Specific IPv6 DHCP packets received by the jdhcpd daemon will cause a memory resource consumption issue to occur on a Junos OS device using the jdhcpd daemon configured to respond to IPv6 requests. Once started, memory consumption will eventually impact any IPv4 or IPv6 request serviced by the jdhcpd daemon, thus creating a Denial of Service (DoS) condition to clients requesting and not receiving IP addresses. Additionally, some clients which were previously holding IPv6 addresses will not have their IPv6 Identity Association (IA) address and network tables agreed upon by the jdhcpd daemon after the failover event occurs, which leads to more than one interface, and multiple IP addresses, being denied on the client. Affected releases are Juniper Networks Junos OS: 17.4 versions prior to 17.4R2; 18.1 versions prior to 18.1R2.

An SRX Series Service Gateway configured for Unified Threat Management (UTM) may experience a system crash with the error message "mbuf exceed" -- an indication of memory buffer exhaustion -- due to the receipt of crafted HTTP traffic. Each crafted HTTP packet inspected by UTM consumes mbufs which can be identified through the following log messages: all_logs.0:Jun 8 03:25:03 srx1 node0.fpc4 : SPU3 jmpi mbuf stall 50%. all_logs.0:Jun 8 03:25:13 srx1 node0.fpc4 : SPU3 jmpi mbuf stall 51%. all_logs.0:Jun 8 03:25:24 srx1 node0.fpc4 : SPU3 jmpi mbuf stall 52%. ... Eventually the system runs out of mbufs and the system crashes (fails over) with the error "mbuf exceed". This issue only occurs when HTTP AV inspection is configured. Devices configured for Web Filtering alone are unaffected by this issue. Affected releases are Junos OS on SRX Series: 12.1X46 versions prior to 12.1X46-D81; 12.3X48 versions prior to 12.3X48-D77; 15.1X49 versions prior to 15.1X49-D101, 15.1X49-D110.

A vulnerability, which was classified as problematic, has been found in Tongda OA 2017 up to 11.7. This issue affects some unknown processing of the file /inc/package_static_resources.php. The manipulation leads to resource consumption. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used.

Docker Registry before 2.6.2 in Docker Distribution does not properly restrict the amount of content accepted from a user, which allows remote attackers to cause a denial of service (memory consumption) via the manifest endpoint.

WebLog Expert Web Server Enterprise 9.4 allows Remote Denial Of Service (daemon crash) via a long HTTP Accept Header to TCP port 9991.

Microsoft Communicator, and Communicator in Microsoft Office 2010 beta, allows remote attackers to cause a denial of service (memory consumption) via a large number of SIP INVITE requests, which trigger the creation of many sessions.

In Node.js including 6.x before 6.17.0, 8.x before 8.15.1, 10.x before 10.15.2, and 11.x before 11.10.1, an attacker can cause a Denial of Service (DoS) by establishing an HTTP or HTTPS connection in keep-alive mode and by sending headers very slowly. This keeps the connection and associated resources alive for a long period of time. Potential attacks are mitigated by the use of a load balancer or other proxy layer. This vulnerability is an extension of CVE-2018-12121, addressed in November and impacts all active Node.js release lines including 6.x before 6.17.0, 8.x before 8.15.1, 10.x before 10.15.2, and 11.x before 11.10.1.

IBM WebSphere Application Server 7.0, 8.0, 8.5, and 9.0 is vulnerable to a denial of service, caused by sending a specially-crafted request. A remote attacker could exploit this vulnerability to cause the server to consume all available memory. IBM X-Force ID: 172125.

By design, BIND is intended to limit the number of TCP clients that can be connected at any given time. The number of allowed connections is a tunable parameter which, if unset, defaults to a conservative value for most servers. Unfortunately, the code which was intended to limit the number of simultaneous connections contained an error which could be exploited to grow the number of simultaneous connections beyond this limit. Versions affected: BIND 9.9.0 -> 9.10.8-P1, 9.11.0 -> 9.11.6, 9.12.0 -> 9.12.4, 9.14.0. BIND 9 Supported Preview Edition versions 9.9.3-S1 -> 9.11.5-S3, and 9.11.5-S5. Versions 9.13.0 -> 9.13.7 of the 9.13 development branch are also affected. Versions prior to BIND 9.9.0 have not been evaluated for vulnerability to CVE-2018-5743.

IBM Security Guardium Big Data Intelligence 4.0 (SonarG) does not properly restrict the size or amount of resources that are requested or influenced by an actor. This weakness can be used to consume more resources than intended. IBM X-Force ID: 161417.

sshpk is vulnerable to ReDoS when parsing crafted invalid public keys.

An issue was discovered in Mattermost Server before 5.18.0. It allows attackers to cause a denial of service (memory consumption) via a large Slack import.

The ap_proxy_http_process_response function in mod_proxy_http.c in the mod_proxy module in the Apache HTTP Server 2.0.63 and 2.2.8 does not limit the number of forwarded interim responses, which allows remote HTTP servers to cause a denial of service (memory consumption) via a large number of interim responses.

An issue has been discovered in GitLab CE/EE affecting all versions starting from 13.2. When querying the repository branches through API, GitLab was ignoring a query parameter and returning a considerable amount of results.

Crash in USB HID dissector in Wireshark 3.4.0 to 3.4.2 allows denial of service via packet injection or crafted capture file

There is a resource management error vulnerability in eCNS280_TD V100R005C10SPC650. An attacker needs to perform specific operations to exploit the vulnerability on the affected device. Due to improper resource management of the function, the vulnerability can be exploited to cause service abnormal on affected devices.

Excessive memory consumption in MS-WSP dissector in Wireshark 3.4.0 to 3.4.4 and 3.2.0 to 3.2.12 allows denial of service via packet injection or crafted capture file

A vulnerability has been discovered in Citrix ADC (formerly known as NetScaler ADC) and Citrix Gateway (formerly known as NetScaler Gateway), and Citrix SD-WAN WANOP Edition models 4000-WO, 4100-WO, 5000-WO, and 5100-WO. These vulnerabilities, if exploited, could lead to the limited available disk space on the appliances being fully consumed.

VMware Workspace ONE UEM REST API contains a denial of service vulnerability. A malicious actor with access to /API/system/admins/session could cause an API denial of service due to improper rate limiting.

blaze is a Scala library for building asynchronous pipelines, with a focus on network IO. All servers running blaze-core before version 0.14.15 are affected by a vulnerability in which unbounded connection acceptance leads to file handle exhaustion. Blaze, accepts connections unconditionally on a dedicated thread pool. This has the net effect of amplifying degradation in services that are unable to handle their current request load, since incoming connections are still accepted and added to an unbounded queue. Each connection allocates a socket handle, which drains a scarce OS resource. This can also confound higher level circuit breakers which work based on detecting failed connections. The vast majority of affected users are using it as part of http4s-blaze-server <= 0.21.16. http4s provides a mechanism for limiting open connections, but is enforced inside the Blaze accept loop, after the connection is accepted and the socket opened. Thus, the limit only prevents the number of connections which can be simultaneously processed, not the number of connections which can be held open. The issue is fixed in version 0.14.15 for "NIO1SocketServerGroup". A "maxConnections" parameter is added, with a default value of 512. Concurrent connections beyond this limit are rejected. To run unbounded, which is not recommended, set a negative number. The "NIO2SocketServerGroup" has no such setting and is now deprecated. There are several possible workarounds described in the refrenced GitHub Advisory GHSA-xmw9-q7x9-j5qc.

idreamsoft iCMS 7.0.15 allows remote attackers to cause a denial of service (resource consumption) via a query for many comments, as demonstrated by the admincp.php?app=comment&perpage= substring followed by a large positive integer.

Http4s (http4s-blaze-server) is a minimal, idiomatic Scala interface for HTTP services. Http4s before versions 0.21.17, 0.22.0-M2, and 1.0.0-M14 have a vulnerability which can lead to a denial-of-service. Blaze-core, a library underlying http4s-blaze-server, accepts connections unboundedly on its selector pool. This has the net effect of amplifying degradation in services that are unable to handle their current request load, since incoming connections are still accepted and added to an unbounded queue. Each connection allocates a socket handle, which drains a scarce OS resource. This can also confound higher level circuit breakers which work based on detecting failed connections. http4s provides a general "MaxActiveRequests" middleware mechanism for limiting open connections, but it is enforced inside the Blaze accept loop, after the connection is accepted and the socket opened. Thus, the limit only prevents the number of connections which can be simultaneously processed, not the number of connections which can be held open. In 0.21.17, 0.22.0-M2, and 1.0.0-M14, a new "maxConnections" property, with a default value of 1024, has been added to the `BlazeServerBuilder`. Setting the value to a negative number restores unbounded behavior, but is strongly disrecommended. The NIO2 backend does not respect `maxConnections`. Its use is now deprecated in http4s-0.21, and the option is removed altogether starting in http4s-0.22. There are several possible workarounds described in the refrenced GitHub Advisory GHSA-xhv5-w9c5-2r2w.

On WAGO PFC200 devices in different firmware versions with special crafted packets an attacker with network access to the device could cause a denial of service for the login service of the runtime.

A vulnerability in the egress packet processing functionality of the Cisco StarOS operating system for Cisco Aggregation Services Router (ASR) 5700 Series devices and Virtualized Packet Core (VPC) System Software could allow an unauthenticated, remote attacker to cause an interface on the device to cease forwarding packets. The device may need to be manually reloaded to clear this Interface Forwarding Denial of Service condition. The vulnerability is due to the failure to properly check that the length of a packet to transmit does not exceed the maximum supported length of the network interface card (NIC). An attacker could exploit this vulnerability by sending a crafted IP packet or a series of crafted IP fragments through an interface on the targeted device. A successful exploit could allow the attacker to cause the network interface to cease forwarding packets. This vulnerability could be triggered by either IPv4 or IPv6 network traffic. This vulnerability affects the following Cisco products when they are running the StarOS operating system and a virtual interface card is installed on the device: Aggregation Services Router (ASR) 5700 Series, Virtualized Packet Core-Distributed Instance (VPC-DI) System Software, Virtualized Packet Core-Single Instance (VPC-SI) System Software. Cisco Bug IDs: CSCvf32385.

A vulnerability in the HTTP/HTTPS service used by J-Web, Web Authentication, Dynamic-VPN (DVPN), Firewall Authentication Pass-Through with Web-Redirect, and Captive Portal allows an unauthenticated attacker to cause an extended Denial of Service (DoS) for these services by sending a high number of specific requests. This issue affects: Juniper Networks Junos OS 12.3 versions prior to 12.3R12-S17 on EX Series; 12.3X48 versions prior to 12.3X48-D105 on SRX Series; 15.1 versions prior to 15.1R7-S8; 15.1X49 versions prior to 15.1X49-D230 on SRX Series; 16.1 versions prior to 16.1R7-S8; 17.4 versions prior to 17.4R2-S12, 17.4R3-S3; 18.1 versions prior to 18.1R3-S11; 18.2 versions prior to 18.2R3-S6; 18.3 versions prior to 18.3R2-S4, 18.3R3-S3; 18.4 versions prior to 18.4R2-S5, 18.4R3-S4; 19.1 versions prior to 19.1R2-S2, 19.1R3-S2; 19.2 versions prior to 19.2R1-S5, 19.2R3; 19.3 versions prior to 19.3R2-S4, 19.3R3; 19.4 versions prior to 19.4R1-S3, 19.4R2-S2, 19.4R3; 20.1 versions prior to 20.1R1-S3, 20.1R2; 20.2 versions prior to 20.2R1-S1, 20.2R2.

Apache Traffic Server 6.0.0 to 6.2.3, 7.0.0 to 7.1.10, and 8.0.0 to 8.0.7 is vulnerable to certain types of HTTP/2 HEADERS frames that can cause the server to allocate a large amount of memory and spin the thread.

CiphertextHeader.java in Cryptacular 1.2.3, as used in Apereo CAS and other products, allows attackers to trigger excessive memory allocation during a decode operation, because the nonce array length associated with "new byte" may depend on untrusted input within the header of encoded data.

sha256crypt and sha512crypt through 0.6 allow attackers to cause a denial of service (CPU consumption) because the algorithm's runtime is proportional to the square of the length of the password.

Pure-FTPd 1.0.48 allows remote attackers to prevent legitimate server use by making enough connections to exceed the connection limit.

An issue was discovered in the ws crate through 2020-09-25 for Rust. The outgoing buffer is not properly limited, leading to a remote memory-consumption attack.

socket.io-parser before 3.4.1 allows attackers to cause a denial of service (memory consumption) via a large packet because a concatenation approach is used.

In Bento4 1.6.0-638, there is an allocator is out of memory in the function AP4_Array<AP4_TrunAtom::Entry>::EnsureCapacity in Ap4Array.h:172, as demonstrated by GPAC. This can cause a denial of service (DOS).

Java Facebook Thrift servers would not error upon receiving messages declaring containers of sizes larger than the payload. As a result, malicious clients could send short messages which would result in a large memory allocation, potentially leading to denial of service. This issue affects Facebook Thrift prior to v2019.12.09.00.

If Apache HTTP Server 2.4.53 is configured to do transformations with mod_sed in contexts where the input to mod_sed may be very large, mod_sed may make excessively large memory allocations and trigger an abort.

Jonathan Looney discovered that the TCP retransmission queue implementation in tcp_fragment in the Linux kernel could be fragmented when handling certain TCP Selective Acknowledgment (SACK) sequences. A remote attacker could use this to cause a denial of service. This has been fixed in stable kernel releases 4.4.182, 4.9.182, 4.14.127, 4.19.52, 5.1.11, and is fixed in commit f070ef2ac66716357066b683fb0baf55f8191a2e.

In vm-superio before 0.1.1, the serial console FIFO can grow to unlimited memory usage when data is sent to the input source (i.e., standard input). This behavior cannot be reproduced from the guest side. When no rate limiting is in place, the host can be subject to memory pressure, impacting all other VMs running on the same host.

Shibboleth Identify Provider 3.x before 3.4.6 has a denial of service flaw. A remote unauthenticated attacker can cause a login flow to trigger Java heap exhaustion due to the creation of objects in the Java Servlet container session.

A Denial-of-Service (DoS) vulnerability was discovered in Team Server in HelpSystems Cobalt Strike 4.2 and 4.3. It allows remote attackers to crash the C2 server thread and block beacons' communication with it.

Pexip Infinity 27 before 28.0 allows remote attackers to trigger excessive resource consumption and termination because of registrar resource mishandling.

An unauthenticated specially crafted packet sent by an attacker over the network will cause a denial-of-service (DoS) vulnerability. Vulnerability allows attacker to stop the PLC. After stopping (ERR LED flashing red), physical access to the PLC is required in order to restart the application. This issue affects: ABB AC500 V2 products with onboard Ethernet version 2.8.4 and prior versions.

A lack of rate limiting in the 'forgot password' feature of Zammad v5.1.0 allows attackers to send an excessive amount of reset requests for a legitimate user, leading to a possible Denial of Service (DoS) via a large amount of generated e-mail messages.

A Denial-of-Service (DoS) vulnerability was discovered in F-Secure Atlant whereby the fsicapd component used in certain F-Secure products while scanning larger packages/fuzzed files consume too much memory eventually can crash the scanning engine. The exploit can be triggered remotely by an attacker.

Etherpad < 1.8.3 is affected by a missing lock check which could cause a denial of service. Aggressively targeting random pad import endpoints with empty data would flatten all pads due to lack of rate limiting and missing ownership check.

An Environment (CWE-2) vulnerability exists in SoMachine Basic, all versions, and Modicon M221(all references, all versions prior to firmware V1.10.0.0) which could cause cycle time impact when flooding the M221 ethernet interface while the Ethernet/IP adapter is activated.

IBM Secure External Authentication Server 2.4.3.2, 6.0.1, 6.0.2 and IBM Secure Proxy 3.4.3.2, 6.0.1, 6.0.2 could allow a remote user to consume resources causing a denial of service due to a resource leak.

Sydent is a reference Matrix identity server. Sydent does not limit the size of requests it receives from HTTP clients. A malicious user could send an HTTP request with a very large body, leading to memory exhaustion and denial of service. Sydent also does not limit response size for requests it makes to remote Matrix homeservers. A malicious homeserver could return a very large response, again leading to memory exhaustion and denial of service. This affects any server which accepts registration requests from untrusted clients. This issue has been patched by releases 89071a1, 0523511, f56eee3. As a workaround request sizes can be limited in an HTTP reverse-proxy. There are no known workarounds for the problem with overlarge responses.

Fastify node module before 0.38.0 is vulnerable to a denial-of-service attack by sending a request with "Content-Type: application/json" and a very large payload.