An issue was discovered in picoTCP and picoTCP-NG through 1.7.0. The DNS domain name record decompression functionality in pico_dns_decompress_name() in pico_dns_common.c does not validate the compression pointer offset values with respect to the actual data present in a DNS response packet, causing out-of-bounds reads that lead to Denial-of-Service.

An issue was discovered in the yh_create_session() function of yubihsm-shell through 2.0.2. The function does not explicitly check the returned session id from the device. An invalid session id would lead to out-of-bounds read and write operations in the session array. This could be used by an attacker to cause a denial of service attack.

Huawei DP300 V500R002C00; RP200 V500R002C00; V600R006C00; TE30 V100R001C10; V500R002C00; V600R006C00; TE40 V500R002C00; V600R006C00; TE50 V500R002C00; V600R006C00; TE60 V100R001C10; V500R002C00; V600R006C00 have an out-of-bounds read vulnerability. An unauthenticated, remote attacker has to control the peer device and craft the Signalling Connection Control Part (SCCP) messages to the target devices. Due to insufficient input validation of some values in the messages, successful exploit will cause out-of-bounds read and some services abnormal.

An issue was discovered in picoTCP and picoTCP-NG through 1.7.0. The code that processes DNS responses in pico_mdns_handle_data_as_answers_generic() in pico_mdns.c does not check whether the number of answers/responses specified in a DNS packet header corresponds to the response data available in the packet, leading to an out-of-bounds read, invalid pointer dereference, and Denial-of-Service.

A vulnerability in the data plane microcode of Lightspeed-Plus line cards for Cisco ASR 9000 Series Aggregation Services Routers could allow an unauthenticated, remote attacker to cause the line card to reset. This vulnerability is due to the incorrect handling of malformed packets that are received on the Lightspeed-Plus line cards. An attacker could exploit this vulnerability by sending a crafted IPv4 or IPv6 packet through an affected device. A successful exploit could allow the attacker to cause the Lightspeed-Plus line card to reset, resulting in a denial of service (DoS) condition for any traffic that traverses that line card.

In Netwide Assembler (NASM) 2.14rc0, there is a heap-based buffer over-read that will cause a remote denial of service attack, related to a while loop in paste_tokens in asm/preproc.c.

An issue was discovered in uIP through 1.0, as used in Contiki and Contiki-NG. Domain name parsing lacks bounds checks, allowing an attacker to corrupt memory with crafted DNS packets.

SCCPX module in Huawei DP300 V500R002C00; RP200 V500R002C00; V600R006C00; TE30 V100R001C10; V500R002C00; V600R006C00; TE40 V500R002C00; V600R006C00; TE50 V500R002C00; V600R006C00; TE60 V100R001C10; V500R002C00; V600R006C00 has an out-of-bounds read vulnerability. An unauthenticated, remote attacker crafts malformed packets with specific parameter to the affected products. Due to insufficient validation of packets, successful exploitation may impact availability of product service.

The File_read_line function in epan/wslua/wslua_file.c in Wireshark through 2.2.11 does not properly strip '\n' characters, which allows remote attackers to cause a denial of service (buffer underflow and application crash) via a crafted packet that triggers the attempted processing of an empty line.

Huawei DP300 V500R002C00, RP200 V500R002C00, V600R006C00, TE30 V100R001C10, V500R002C00, V600R006C00, TE40 V500R002C00, V600R006C00, TE50 V500R002C00, V600R006C00, TE60 V100R001C01, V100R001C10, V500R002C00, V600R006C00 have an out-of-bound read vulnerability. A remote attacker send specially crafted Session Initiation Protocol (SIP) messages to the affected products. Due to insufficient input validation, successful exploit will cause some services abnormal.

Huawei USG6000V with versions V500R001C20SPC300, V500R003C00SPC100, and V500R005C00SPC100 have an out-of-bounds read vulnerability. Due to a logical flaw in a JSON parsing routine, a remote, unauthenticated attacker could exploit this vulnerability to disrupt service in the affected products.

An out-of-bounds buffer read flaw was found in the pluto daemon of libreswan from versions 3.27 till 3.31 where, an unauthenticated attacker could use this flaw to crash libreswan by sending specially-crafted IKEv1 Informational Exchange packets. The daemon respawns after the crash.

An issue was discovered in FNET through 4.6.4. The code for processing the hop-by-hop header (in the IPv6 extension headers) doesn't check for a valid length of an extension header, and therefore an out-of-bounds read can occur in _fnet_ip6_ext_header_handler_options in fnet_ip6.c, leading to Denial-of-Service.

Huawei NIP6800 versions V500R001C30, V500R001C60SPC500, and V500R005C00; and Secospace USG6600 and USG9500 versions V500R001C30SPC200, V500R001C30SPC600, V500R001C60SPC500, and V500R005C00 have an input validation vulnerability where the IPSec module does not validate a field in a specific message. Attackers can send specific message to cause out-of-bound read, compromising normal service.

Insufficient boundary checks when decoding JSON in TryParse reads out of bounds memory, potentially leading to DOS. This issue affects HHVM 4.45.0, 4.44.0, 4.43.0, 4.42.0, 4.41.0, 4.40.0, 4.39.0, versions between 4.33.0 and 4.38.0 (inclusive), versions between 4.9.0 and 4.32.0 (inclusive), and versions prior to 4.8.7.

An issue was discovered in Qt through 5.12.9, and 5.13.x through 5.15.x before 5.15.1. read_xbm_body in gui/image/qxbmhandler.cpp has a buffer over-read.

An issue was discovered in picoTCP 1.7.0. The code for processing the IPv6 destination options does not check for a valid length of the destination options header. This results in an Out-of-Bounds Read, and, depending on the memory protection mechanism, this may result in Denial-of-Service in pico_ipv6_process_destopt() in pico_ipv6.c.

Huawei NIP6800 versions V500R001C30, V500R001C60SPC500, and V500R005C00; Secospace USG6600 and USG9500 versions V500R001C30SPC200, V500R001C30SPC600, V500R001C60SPC500, and V500R005C00 have a vulnerability that a memory management error exists when IPSec Module handing a specific message. This causes 1 byte out-of-bound read, compromising normal service.

Crash in the Sysdig Event dissector in Wireshark 3.6.0 and 3.4.0 to 3.4.10 allows denial of service via packet injection or crafted capture file

SCCPX module in Huawei DP300 V500R002C00; RP200 V500R002C00; V600R006C00; TE30 V100R001C10; V500R002C00; V600R006C00; TE40 V500R002C00; V600R006C00; TE50 V500R002C00; V600R006C00; TE60 V100R001C10; V500R002C00; V600R006C00 has an invalid memory access vulnerabilities. An unauthenticated, remote attacker crafts malformed packets with specific parameter to the affected products. Due to insufficient validation of packets, successful exploitation may impact availability of product service.

Insufficient boundary checks when decoding JSON in handleBackslash reads out of bounds memory, potentially leading to DOS. This issue affects HHVM 4.45.0, 4.44.0, 4.43.0, 4.42.0, 4.41.0, 4.40.0, 4.39.0, versions between 4.33.0 and 4.38.0 (inclusive), versions between 4.9.0 and 4.32.0 (inclusive), and versions prior to 4.8.7.

It is possible for an unauthenticated remote DCOM websocket connection to crash the Command Centre service due to an out-of-bounds buffer access. Affected versions are v8.20 prior to v8.20.1166(MR3), v8.10 prior to v8.10.1211(MR5), v8.00 prior to v8.00.1228(MR6), all versions of 7.90 and earlier.

In nDPI through 3.2, the Oracle protocol dissector has a heap-based buffer over-read in ndpi_search_oracle in lib/protocols/oracle.c.

On Juniper Networks Junos OS platforms configured as DHCPv6 local server or DHCPv6 Relay Agent, Juniper Networks Dynamic Host Configuration Protocol Daemon (JDHCPD) process might crash with a core dump if a malformed DHCPv6 packet is received, resulting with the restart of the daemon. This issue only affects DHCPv6, it does not affect DHCPv4. This issue affects: Juniper Networks Junos OS 17.4 versions prior to 17.4R2-S12, 17.4R3-S3; 18.1 versions prior to 18.1R3-S11; 18.2 versions prior to 18.2R3-S6; 18.2X75 versions prior to 18.2X75-D65; 18.3 versions prior to 18.3R2-S4, 18.3R3-S3; 18.4 versions prior to 18.4R2-S5, 18.4R3-S4; 19.1 versions prior to 19.1R3-S2; 19.2 versions prior to 19.2R1-S5, 19.2R3; 19.2 version 19.2R2 and later versions; 19.3 versions prior to 19.3R2-S4, 19.3R3; 19.4 versions prior to 19.4R1-S3, 19.4R2-S2, 19.4R3; 20.1 versions prior to 20.1R1-S3, 20.1R2; This issue does not affect Juniper Networks Junos OS prior to 17.4R1.

ACCEL-PPP 1.12.0 has an out-of-bounds read in triton_context_schedule if the client exits after authentication.

In Tensorflow before version 2.4.0, an attacker can pass an invalid `axis` value to `tf.quantization.quantize_and_dequantize`. This results in accessing a dimension outside the rank of the input tensor in the C++ kernel implementation. However, dim_size only does a DCHECK to validate the argument and then uses it to access the corresponding element of an array. Since in normal builds, `DCHECK`-like macros are no-ops, this results in segfault and access out of bounds of the array. The issue is patched in eccb7ec454e6617738554a255d77f08e60ee0808 and TensorFlow 2.4.0 will be released containing the patch. TensorFlow nightly packages after this commit will also have the issue resolved.

The Server-Server protocol implementation in ngIRCd before 26~rc2 allows an out-of-bounds access, as demonstrated by the IRC_NJOIN() function.

Rockwell Automation RSLinx Enterprise Software (LogReceiver.exe) CPR9, CPR9-SR1, CPR9-SR2, CPR9-SR3, CPR9-SR4, CPR9-SR5, CPR9-SR5.1, and CPR9-SR6 does not handle input correctly and results in a logic error if it receives a datagram with an incorrect value in the “Record Data Size” field. By sending a datagram to the service over Port 4444/UDP with the “Record Data Size” field modified to an oversized value, an attacker could cause an out-of-bounds read access violation that leads to a service crash. The service can be recovered with a manual reboot. The patches and details pertaining to this vulnerability can be found at the following Rockwell Automation Security Advisory link (login is required): https://rockwellautomation.custhelp.com/app/answers/detail/a_id/537599

A denial of service vulnerability exists in some Xiaomi models of phones. The vulnerability is caused by out-of-bound read/write and can be exploited by attackers to make denial of service.

An issue was discovered in Contiki through 3.0. An Out-of-Bounds Read vulnerability exists in the uIP TCP/IP Stack component when calculating the checksums for IP packets in upper_layer_chksum in net/ipv4/uip.c.

Dell BSAFE Micro Edition Suite, versions prior to 4.5, are vulnerable to a Buffer Under-Read Vulnerability. An unauthenticated remote attacker could potentially exploit this vulnerability resulting in undefined behaviour, or a crash of the affected systems.

In Dovecot before 2.3.11.3, sending a specially formatted RPA request will crash the auth service because a length of zero is mishandled.

In Dovecot before 2.3.11.3, sending a specially formatted NTLM request will crash the auth service because of an out-of-bounds read.

ACCEL-PPP 1.12.0 has an out-of-bounds read in post_msg when processing a call_clear_request.

libautotrace.a in AutoTrace 0.31.1 allows remote attackers to cause a denial of service (invalid read and SEGV), related to the ReadImage function in input-bmp.c:440:14.

In nDPI through 3.2 Stable, an out-of-bounds read in concat_hash_string in ssh.c can be exploited by a network-positioned attacker that can send malformed SSH protocol messages on a network segment monitored by nDPI's library.

Buffer over-read while processing NDL attribute if attribute length is larger than expected and then FW is treating it as more number of immutable schedules in Snapdragon Auto, Snapdragon Compute, Snapdragon Connectivity, Snapdragon Consumer Electronics Connectivity, Snapdragon Consumer IOT, Snapdragon Industrial IOT, Snapdragon Mobile, Snapdragon Voice & Music, Snapdragon Wired Infrastructure and Networking

libxml2 20904-GITv2.9.4-16-g0741801 is vulnerable to a heap-based buffer over-read in the xmlDictAddString function in dict.c. This vulnerability causes programs that use libxml2, such as PHP, to crash. This vulnerability exists because of an incomplete fix for CVE-2016-1839.

libxml2 20904-GITv2.9.4-16-g0741801 is vulnerable to a heap-based buffer over-read in the xmlDictComputeFastKey function in dict.c. This vulnerability causes programs that use libxml2, such as PHP, to crash. This vulnerability exists because of an incomplete fix for libxml2 Bug 759398.

Skia, as used in Google Chrome before 25.0.1364.97 on Windows and Linux, and before 25.0.1364.99 on Mac OS X, allows remote attackers to cause a denial of service (out-of-bounds read) via vectors related to a "user gesture check for dangerous file downloads."

libautotrace.a in AutoTrace 0.31.1 allows remote attackers to cause a denial of service (invalid read and SEGV), related to the input_pnm_reader function in input-pnm.c:243:3.

libautotrace.a in AutoTrace 0.31.1 allows remote attackers to cause a denial of service (invalid read and SEGV), related to the ReadImage function in input-bmp.c:390:12.

libyara/re.c in the regex component in YARA 3.5.0 allows remote attackers to cause a denial of service (out-of-bounds read and application crash) via a crafted rule that is mishandled in the yr_re_exec function.

The FoFiType1C::convertToType0 function in FoFiType1C.cc in Poppler 0.59.0 has a heap-based buffer over-read vulnerability if an out-of-bounds font dictionary index is encountered, which allows an attacker to launch a denial of service attack.

read_header in archive_read_support_format_rar.c in libarchive 3.3.2 suffers from an off-by-one error for UTF-16 names in RAR archives, leading to an out-of-bounds read in archive_read_format_rar_read_header.

The AP4_AvccAtom and AP4_HvccAtom classes in Bento4 version 1.5.0-617 do not properly validate data sizes, leading to a heap-based buffer over-read and application crash in AP4_DataBuffer::SetData in Core/Ap4DataBuffer.cpp.

RP200 V500R002C00, V600R006C00; TE30 V100R001C10, V500R002C00, V600R006C00; TE40 V500R002C00, V600R006C00; TE50 V500R002C00, V600R006C00; TE60 V100R001C10, V500R002C00, V600R006C00 have an out-of-bounds read vulnerabilities in some Huawei products. Due to insufficient input validation, a remote attacker could exploit these vulnerabilities by sending specially crafted SS7 related packets to the target devices. Successful exploit will cause out-of-bounds read and possibly crash the system.

In Eclipse Wakaama, ever since its inception until 2021-01-14, the CoAP parsing code does not properly sanitize network-received data.