In the Linux kernel, the following vulnerability has been resolved: mt76: mt7921: fix possible AOOB issue in mt7921_mcu_tx_rate_report Fix possible array out of bound access in mt7921_mcu_tx_rate_report. Remove unnecessary varibable in mt7921_mcu_tx_rate_report

In the Linux kernel, the following vulnerability has been resolved: sched/scs: Reset task stack state in bringup_cpu() To hot unplug a CPU, the idle task on that CPU calls a few layers of C code before finally leaving the kernel. When KASAN is in use, poisoned shadow is left around for each of the active stack frames, and when shadow call stacks are in use. When shadow call stacks (SCS) are in use the task's saved SCS SP is left pointing at an arbitrary point within the task's shadow call stack. When a CPU is offlined than onlined back into the kernel, this stale state can adversely affect execution. Stale KASAN shadow can alias new stackframes and result in bogus KASAN warnings. A stale SCS SP is effectively a memory leak, and prevents a portion of the shadow call stack being used. Across a number of hotplug cycles the idle task's entire shadow call stack can become unusable. We previously fixed the KASAN issue in commit: e1b77c92981a5222 ("sched/kasan: remove stale KASAN poison after hotplug") ... by removing any stale KASAN stack poison immediately prior to onlining a CPU. Subsequently in commit: f1a0a376ca0c4ef1 ("sched/core: Initialize the idle task with preemption disabled") ... the refactoring left the KASAN and SCS cleanup in one-time idle thread initialization code rather than something invoked prior to each CPU being onlined, breaking both as above. We fixed SCS (but not KASAN) in commit: 63acd42c0d4942f7 ("sched/scs: Reset the shadow stack when idle_task_exit") ... but as this runs in the context of the idle task being offlined it's potentially fragile. To fix these consistently and more robustly, reset the SCS SP and KASAN shadow of a CPU's idle task immediately before we online that CPU in bringup_cpu(). This ensures the idle task always has a consistent state when it is running, and removes the need to so so when exiting an idle task. Whenever any thread is created, dup_task_struct() will give the task a stack which is free of KASAN shadow, and initialize the task's SCS SP, so there's no need to specially initialize either for idle thread within init_idle(), as this was only necessary to handle hotplug cycles. I've tested this on arm64 with: * gcc 11.1.0, defconfig +KASAN_INLINE, KASAN_STACK * clang 12.0.0, defconfig +KASAN_INLINE, KASAN_STACK, SHADOW_CALL_STACK ... offlining and onlining CPUS with: | while true; do | for C in /sys/devices/system/cpu/cpu*/online; do | echo 0 > $C; | echo 1 > $C; | done | done

In the Linux kernel, the following vulnerability has been resolved: IB/mlx5: Fix initializing CQ fragments buffer The function init_cq_frag_buf() can be called to initialize the current CQ fragments buffer cq->buf, or the temporary cq->resize_buf that is filled during CQ resize operation. However, the offending commit started to use function get_cqe() for getting the CQEs, the issue with this change is that get_cqe() always returns CQEs from cq->buf, which leads us to initialize the wrong buffer, and in case of enlarging the CQ we try to access elements beyond the size of the current cq->buf and eventually hit a kernel panic. [exception RIP: init_cq_frag_buf+103] [ffff9f799ddcbcd8] mlx5_ib_resize_cq at ffffffffc0835d60 [mlx5_ib] [ffff9f799ddcbdb0] ib_resize_cq at ffffffffc05270df [ib_core] [ffff9f799ddcbdc0] llt_rdma_setup_qp at ffffffffc0a6a712 [llt] [ffff9f799ddcbe10] llt_rdma_cc_event_action at ffffffffc0a6b411 [llt] [ffff9f799ddcbe98] llt_rdma_client_conn_thread at ffffffffc0a6bb75 [llt] [ffff9f799ddcbec8] kthread at ffffffffa66c5da1 [ffff9f799ddcbf50] ret_from_fork_nospec_begin at ffffffffa6d95ddd Fix it by getting the needed CQE by calling mlx5_frag_buf_get_wqe() that takes the correct source buffer as a parameter.

In the Linux kernel, the following vulnerability has been resolved: KVM: Destroy I/O bus devices on unregister failure _after_ sync'ing SRCU If allocating a new instance of an I/O bus fails when unregistering a device, wait to destroy the device until after all readers are guaranteed to see the new null bus. Destroying devices before the bus is nullified could lead to use-after-free since readers expect the devices on their reference of the bus to remain valid.

In the Linux kernel, the following vulnerability has been resolved: net: sched: flower: protect fl_walk() with rcu Patch that refactored fl_walk() to use idr_for_each_entry_continue_ul() also removed rcu protection of individual filters which causes following use-after-free when filter is deleted concurrently. Fix fl_walk() to obtain rcu read lock while iterating and taking the filter reference and temporary release the lock while calling arg->fn() callback that can sleep. KASAN trace: [ 352.773640] ================================================================== [ 352.775041] BUG: KASAN: use-after-free in fl_walk+0x159/0x240 [cls_flower] [ 352.776304] Read of size 4 at addr ffff8881c8251480 by task tc/2987 [ 352.777862] CPU: 3 PID: 2987 Comm: tc Not tainted 5.15.0-rc2+ #2 [ 352.778980] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 [ 352.781022] Call Trace: [ 352.781573] dump_stack_lvl+0x46/0x5a [ 352.782332] print_address_description.constprop.0+0x1f/0x140 [ 352.783400] ? fl_walk+0x159/0x240 [cls_flower] [ 352.784292] ? fl_walk+0x159/0x240 [cls_flower] [ 352.785138] kasan_report.cold+0x83/0xdf [ 352.785851] ? fl_walk+0x159/0x240 [cls_flower] [ 352.786587] kasan_check_range+0x145/0x1a0 [ 352.787337] fl_walk+0x159/0x240 [cls_flower] [ 352.788163] ? fl_put+0x10/0x10 [cls_flower] [ 352.789007] ? __mutex_unlock_slowpath.constprop.0+0x220/0x220 [ 352.790102] tcf_chain_dump+0x231/0x450 [ 352.790878] ? tcf_chain_tp_delete_empty+0x170/0x170 [ 352.791833] ? __might_sleep+0x2e/0xc0 [ 352.792594] ? tfilter_notify+0x170/0x170 [ 352.793400] ? __mutex_unlock_slowpath.constprop.0+0x220/0x220 [ 352.794477] tc_dump_tfilter+0x385/0x4b0 [ 352.795262] ? tc_new_tfilter+0x1180/0x1180 [ 352.796103] ? __mod_node_page_state+0x1f/0xc0 [ 352.796974] ? __build_skb_around+0x10e/0x130 [ 352.797826] netlink_dump+0x2c0/0x560 [ 352.798563] ? netlink_getsockopt+0x430/0x430 [ 352.799433] ? __mutex_unlock_slowpath.constprop.0+0x220/0x220 [ 352.800542] __netlink_dump_start+0x356/0x440 [ 352.801397] rtnetlink_rcv_msg+0x3ff/0x550 [ 352.802190] ? tc_new_tfilter+0x1180/0x1180 [ 352.802872] ? rtnl_calcit.isra.0+0x1f0/0x1f0 [ 352.803668] ? tc_new_tfilter+0x1180/0x1180 [ 352.804344] ? _copy_from_iter_nocache+0x800/0x800 [ 352.805202] ? kasan_set_track+0x1c/0x30 [ 352.805900] netlink_rcv_skb+0xc6/0x1f0 [ 352.806587] ? rht_deferred_worker+0x6b0/0x6b0 [ 352.807455] ? rtnl_calcit.isra.0+0x1f0/0x1f0 [ 352.808324] ? netlink_ack+0x4d0/0x4d0 [ 352.809086] ? netlink_deliver_tap+0x62/0x3d0 [ 352.809951] netlink_unicast+0x353/0x480 [ 352.810744] ? netlink_attachskb+0x430/0x430 [ 352.811586] ? __alloc_skb+0xd7/0x200 [ 352.812349] netlink_sendmsg+0x396/0x680 [ 352.813132] ? netlink_unicast+0x480/0x480 [ 352.813952] ? __import_iovec+0x192/0x210 [ 352.814759] ? netlink_unicast+0x480/0x480 [ 352.815580] sock_sendmsg+0x6c/0x80 [ 352.816299] ____sys_sendmsg+0x3a5/0x3c0 [ 352.817096] ? kernel_sendmsg+0x30/0x30 [ 352.817873] ? __ia32_sys_recvmmsg+0x150/0x150 [ 352.818753] ___sys_sendmsg+0xd8/0x140 [ 352.819518] ? sendmsg_copy_msghdr+0x110/0x110 [ 352.820402] ? ___sys_recvmsg+0xf4/0x1a0 [ 352.821110] ? __copy_msghdr_from_user+0x260/0x260 [ 352.821934] ? _raw_spin_lock+0x81/0xd0 [ 352.822680] ? __handle_mm_fault+0xef3/0x1b20 [ 352.823549] ? rb_insert_color+0x2a/0x270 [ 352.824373] ? copy_page_range+0x16b0/0x16b0 [ 352.825209] ? perf_event_update_userpage+0x2d0/0x2d0 [ 352.826190] ? __fget_light+0xd9/0xf0 [ 352.826941] __sys_sendmsg+0xb3/0x130 [ 352.827613] ? __sys_sendmsg_sock+0x20/0x20 [ 352.828377] ? do_user_addr_fault+0x2c5/0x8a0 [ 352.829184] ? fpregs_assert_state_consistent+0x52/0x60 [ 352.830001] ? exit_to_user_mode_prepare+0x32/0x160 [ 352.830845] do_syscall_64+0x35/0x80 [ 352.831445] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 352.832331] RIP: 0033:0x7f7bee973c17 [ ---truncated---

In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: unlink table before deleting it syzbot reports following UAF: BUG: KASAN: use-after-free in memcmp+0x18f/0x1c0 lib/string.c:955 nla_strcmp+0xf2/0x130 lib/nlattr.c:836 nft_table_lookup.part.0+0x1a2/0x460 net/netfilter/nf_tables_api.c:570 nft_table_lookup net/netfilter/nf_tables_api.c:4064 [inline] nf_tables_getset+0x1b3/0x860 net/netfilter/nf_tables_api.c:4064 nfnetlink_rcv_msg+0x659/0x13f0 net/netfilter/nfnetlink.c:285 netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2504 Problem is that all get operations are lockless, so the commit_mutex held by nft_rcv_nl_event() isn't enough to stop a parallel GET request from doing read-accesses to the table object even after synchronize_rcu(). To avoid this, unlink the table first and store the table objects in on-stack scratch space.

In the Linux kernel, the following vulnerability has been resolved: sch_cake: do not call cake_destroy() from cake_init() qdiscs are not supposed to call their own destroy() method from init(), because core stack already does that. syzbot was able to trigger use after free: DEBUG_LOCKS_WARN_ON(lock->magic != lock) WARNING: CPU: 0 PID: 21902 at kernel/locking/mutex.c:586 __mutex_lock_common kernel/locking/mutex.c:586 [inline] WARNING: CPU: 0 PID: 21902 at kernel/locking/mutex.c:586 __mutex_lock+0x9ec/0x12f0 kernel/locking/mutex.c:740 Modules linked in: CPU: 0 PID: 21902 Comm: syz-executor189 Not tainted 5.16.0-rc4-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:__mutex_lock_common kernel/locking/mutex.c:586 [inline] RIP: 0010:__mutex_lock+0x9ec/0x12f0 kernel/locking/mutex.c:740 Code: 08 84 d2 0f 85 19 08 00 00 8b 05 97 38 4b 04 85 c0 0f 85 27 f7 ff ff 48 c7 c6 20 00 ac 89 48 c7 c7 a0 fe ab 89 e8 bf 76 ba ff <0f> 0b e9 0d f7 ff ff 48 8b 44 24 40 48 8d b8 c8 08 00 00 48 89 f8 RSP: 0018:ffffc9000627f290 EFLAGS: 00010282 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 RDX: ffff88802315d700 RSI: ffffffff815f1db8 RDI: fffff52000c4fe44 RBP: ffff88818f28e000 R08: 0000000000000000 R09: 0000000000000000 R10: ffffffff815ebb5e R11: 0000000000000000 R12: 0000000000000000 R13: dffffc0000000000 R14: ffffc9000627f458 R15: 0000000093c30000 FS: 0000555556abc400(0000) GS:ffff8880b9c00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fda689c3303 CR3: 000000001cfbb000 CR4: 0000000000350ef0 Call Trace: <TASK> tcf_chain0_head_change_cb_del+0x2e/0x3d0 net/sched/cls_api.c:810 tcf_block_put_ext net/sched/cls_api.c:1381 [inline] tcf_block_put_ext net/sched/cls_api.c:1376 [inline] tcf_block_put+0xbc/0x130 net/sched/cls_api.c:1394 cake_destroy+0x3f/0x80 net/sched/sch_cake.c:2695 qdisc_create.constprop.0+0x9da/0x10f0 net/sched/sch_api.c:1293 tc_modify_qdisc+0x4c5/0x1980 net/sched/sch_api.c:1660 rtnetlink_rcv_msg+0x413/0xb80 net/core/rtnetlink.c:5571 netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2496 netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline] netlink_unicast+0x533/0x7d0 net/netlink/af_netlink.c:1345 netlink_sendmsg+0x904/0xdf0 net/netlink/af_netlink.c:1921 sock_sendmsg_nosec net/socket.c:704 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:724 ____sys_sendmsg+0x6e8/0x810 net/socket.c:2409 ___sys_sendmsg+0xf3/0x170 net/socket.c:2463 __sys_sendmsg+0xe5/0x1b0 net/socket.c:2492 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f1bb06badb9 Code: Unable to access opcode bytes at RIP 0x7f1bb06bad8f. RSP: 002b:00007fff3012a658 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007f1bb06badb9 RDX: 0000000000000000 RSI: 00000000200007c0 RDI: 0000000000000003 RBP: 0000000000000000 R08: 0000000000000003 R09: 0000000000000003 R10: 0000000000000003 R11: 0000000000000246 R12: 00007fff3012a688 R13: 00007fff3012a6a0 R14: 00007fff3012a6e0 R15: 00000000000013c2 </TASK>

In the Linux kernel, the following vulnerability has been resolved: io_uring: fix overflows checks in provide buffers Colin reported before possible overflow and sign extension problems in io_provide_buffers_prep(). As Linus pointed out previous attempt did nothing useful, see d81269fecb8ce ("io_uring: fix provide_buffers sign extension"). Do that with help of check_<op>_overflow helpers. And fix struct io_provide_buf::len type, as it doesn't make much sense to keep it signed.

In the Linux kernel, the following vulnerability has been resolved: i2c: virtio: disable timeout handling If a timeout is hit, it can result is incorrect data on the I2C bus and/or memory corruptions in the guest since the device can still be operating on the buffers it was given while the guest has freed them. Here is, for example, the start of a slub_debug splat which was triggered on the next transfer after one transfer was forced to timeout by setting a breakpoint in the backend (rust-vmm/vhost-device): BUG kmalloc-1k (Not tainted): Poison overwritten First byte 0x1 instead of 0x6b Allocated in virtio_i2c_xfer+0x65/0x35c age=350 cpu=0 pid=29 __kmalloc+0xc2/0x1c9 virtio_i2c_xfer+0x65/0x35c __i2c_transfer+0x429/0x57d i2c_transfer+0x115/0x134 i2cdev_ioctl_rdwr+0x16a/0x1de i2cdev_ioctl+0x247/0x2ed vfs_ioctl+0x21/0x30 sys_ioctl+0xb18/0xb41 Freed in virtio_i2c_xfer+0x32e/0x35c age=244 cpu=0 pid=29 kfree+0x1bd/0x1cc virtio_i2c_xfer+0x32e/0x35c __i2c_transfer+0x429/0x57d i2c_transfer+0x115/0x134 i2cdev_ioctl_rdwr+0x16a/0x1de i2cdev_ioctl+0x247/0x2ed vfs_ioctl+0x21/0x30 sys_ioctl+0xb18/0xb41 There is no simple fix for this (the driver would have to always create bounce buffers and hold on to them until the device eventually returns the buffers), so just disable the timeout support for now.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix off by one in hdmi_14_process_transaction() The hdcp_i2c_offsets[] array did not have an entry for HDCP_MESSAGE_ID_WRITE_CONTENT_STREAM_TYPE so it led to an off by one read overflow. I added an entry and copied the 0x0 value for the offset from similar code in drivers/gpu/drm/amd/display/modules/hdcp/hdcp_ddc.c. I also declared several of these arrays as having HDCP_MESSAGE_ID_MAX entries. This doesn't change the code, but it's just a belt and suspenders approach to try future proof the code.

In the Linux kernel, the following vulnerability has been resolved: pid: take a reference when initializing `cad_pid` During boot, kernel_init_freeable() initializes `cad_pid` to the init task's struct pid. Later on, we may change `cad_pid` via a sysctl, and when this happens proc_do_cad_pid() will increment the refcount on the new pid via get_pid(), and will decrement the refcount on the old pid via put_pid(). As we never called get_pid() when we initialized `cad_pid`, we decrement a reference we never incremented, can therefore free the init task's struct pid early. As there can be dangling references to the struct pid, we can later encounter a use-after-free (e.g. when delivering signals). This was spotted when fuzzing v5.13-rc3 with Syzkaller, but seems to have been around since the conversion of `cad_pid` to struct pid in commit 9ec52099e4b8 ("[PATCH] replace cad_pid by a struct pid") from the pre-KASAN stone age of v2.6.19. Fix this by getting a reference to the init task's struct pid when we assign it to `cad_pid`. Full KASAN splat below. ================================================================== BUG: KASAN: use-after-free in ns_of_pid include/linux/pid.h:153 [inline] BUG: KASAN: use-after-free in task_active_pid_ns+0xc0/0xc8 kernel/pid.c:509 Read of size 4 at addr ffff23794dda0004 by task syz-executor.0/273 CPU: 1 PID: 273 Comm: syz-executor.0 Not tainted 5.12.0-00001-g9aef892b2d15 #1 Hardware name: linux,dummy-virt (DT) Call trace: ns_of_pid include/linux/pid.h:153 [inline] task_active_pid_ns+0xc0/0xc8 kernel/pid.c:509 do_notify_parent+0x308/0xe60 kernel/signal.c:1950 exit_notify kernel/exit.c:682 [inline] do_exit+0x2334/0x2bd0 kernel/exit.c:845 do_group_exit+0x108/0x2c8 kernel/exit.c:922 get_signal+0x4e4/0x2a88 kernel/signal.c:2781 do_signal arch/arm64/kernel/signal.c:882 [inline] do_notify_resume+0x300/0x970 arch/arm64/kernel/signal.c:936 work_pending+0xc/0x2dc Allocated by task 0: slab_post_alloc_hook+0x50/0x5c0 mm/slab.h:516 slab_alloc_node mm/slub.c:2907 [inline] slab_alloc mm/slub.c:2915 [inline] kmem_cache_alloc+0x1f4/0x4c0 mm/slub.c:2920 alloc_pid+0xdc/0xc00 kernel/pid.c:180 copy_process+0x2794/0x5e18 kernel/fork.c:2129 kernel_clone+0x194/0x13c8 kernel/fork.c:2500 kernel_thread+0xd4/0x110 kernel/fork.c:2552 rest_init+0x44/0x4a0 init/main.c:687 arch_call_rest_init+0x1c/0x28 start_kernel+0x520/0x554 init/main.c:1064 0x0 Freed by task 270: slab_free_hook mm/slub.c:1562 [inline] slab_free_freelist_hook+0x98/0x260 mm/slub.c:1600 slab_free mm/slub.c:3161 [inline] kmem_cache_free+0x224/0x8e0 mm/slub.c:3177 put_pid.part.4+0xe0/0x1a8 kernel/pid.c:114 put_pid+0x30/0x48 kernel/pid.c:109 proc_do_cad_pid+0x190/0x1b0 kernel/sysctl.c:1401 proc_sys_call_handler+0x338/0x4b0 fs/proc/proc_sysctl.c:591 proc_sys_write+0x34/0x48 fs/proc/proc_sysctl.c:617 call_write_iter include/linux/fs.h:1977 [inline] new_sync_write+0x3ac/0x510 fs/read_write.c:518 vfs_write fs/read_write.c:605 [inline] vfs_write+0x9c4/0x1018 fs/read_write.c:585 ksys_write+0x124/0x240 fs/read_write.c:658 __do_sys_write fs/read_write.c:670 [inline] __se_sys_write fs/read_write.c:667 [inline] __arm64_sys_write+0x78/0xb0 fs/read_write.c:667 __invoke_syscall arch/arm64/kernel/syscall.c:37 [inline] invoke_syscall arch/arm64/kernel/syscall.c:49 [inline] el0_svc_common.constprop.1+0x16c/0x388 arch/arm64/kernel/syscall.c:129 do_el0_svc+0xf8/0x150 arch/arm64/kernel/syscall.c:168 el0_svc+0x28/0x38 arch/arm64/kernel/entry-common.c:416 el0_sync_handler+0x134/0x180 arch/arm64/kernel/entry-common.c:432 el0_sync+0x154/0x180 arch/arm64/kernel/entry.S:701 The buggy address belongs to the object at ffff23794dda0000 which belongs to the cache pid of size 224 The buggy address is located 4 bytes inside of 224-byte region [ff ---truncated---

In the Linux kernel, the following vulnerability has been resolved: scsi: mpt3sas: Fix kernel panic during drive powercycle test While looping over shost's sdev list it is possible that one of the drives is getting removed and its sas_target object is freed but its sdev object remains intact. Consequently, a kernel panic can occur while the driver is trying to access the sas_address field of sas_target object without also checking the sas_target object for NULL.

In the Linux kernel, the following vulnerability has been resolved: kyber: fix out of bounds access when preempted __blk_mq_sched_bio_merge() gets the ctx and hctx for the current CPU and passes the hctx to ->bio_merge(). kyber_bio_merge() then gets the ctx for the current CPU again and uses that to get the corresponding Kyber context in the passed hctx. However, the thread may be preempted between the two calls to blk_mq_get_ctx(), and the ctx returned the second time may no longer correspond to the passed hctx. This "works" accidentally most of the time, but it can cause us to read garbage if the second ctx came from an hctx with more ctx's than the first one (i.e., if ctx->index_hw[hctx->type] > hctx->nr_ctx). This manifested as this UBSAN array index out of bounds error reported by Jakub: UBSAN: array-index-out-of-bounds in ../kernel/locking/qspinlock.c:130:9 index 13106 is out of range for type 'long unsigned int [128]' Call Trace: dump_stack+0xa4/0xe5 ubsan_epilogue+0x5/0x40 __ubsan_handle_out_of_bounds.cold.13+0x2a/0x34 queued_spin_lock_slowpath+0x476/0x480 do_raw_spin_lock+0x1c2/0x1d0 kyber_bio_merge+0x112/0x180 blk_mq_submit_bio+0x1f5/0x1100 submit_bio_noacct+0x7b0/0x870 submit_bio+0xc2/0x3a0 btrfs_map_bio+0x4f0/0x9d0 btrfs_submit_data_bio+0x24e/0x310 submit_one_bio+0x7f/0xb0 submit_extent_page+0xc4/0x440 __extent_writepage_io+0x2b8/0x5e0 __extent_writepage+0x28d/0x6e0 extent_write_cache_pages+0x4d7/0x7a0 extent_writepages+0xa2/0x110 do_writepages+0x8f/0x180 __writeback_single_inode+0x99/0x7f0 writeback_sb_inodes+0x34e/0x790 __writeback_inodes_wb+0x9e/0x120 wb_writeback+0x4d2/0x660 wb_workfn+0x64d/0xa10 process_one_work+0x53a/0xa80 worker_thread+0x69/0x5b0 kthread+0x20b/0x240 ret_from_fork+0x1f/0x30 Only Kyber uses the hctx, so fix it by passing the request_queue to ->bio_merge() instead. BFQ and mq-deadline just use that, and Kyber can map the queues itself to avoid the mismatch.

In the Linux kernel, the following vulnerability has been resolved: hwmon: (lm90) Prevent integer overflow/underflow in hysteresis calculations Commit b50aa49638c7 ("hwmon: (lm90) Prevent integer underflows of temperature calculations") addressed a number of underflow situations when writing temperature limits. However, it missed one situation, seen when an attempt is made to set the hysteresis value to MAX_LONG and the critical temperature limit is negative. Use clamp_val() when setting the hysteresis temperature to ensure that the provided value can never overflow or underflow.

In the Linux kernel, the following vulnerability has been resolved: media: staging/intel-ipu3: Fix set_fmt error handling If there in an error during a set_fmt, do not overwrite the previous sizes with the invalid config. Without this patch, v4l2-compliance ends up allocating 4GiB of RAM and causing the following OOPs [ 38.662975] ipu3-imgu 0000:00:05.0: swiotlb buffer is full (sz: 4096 bytes) [ 38.662980] DMA: Out of SW-IOMMU space for 4096 bytes at device 0000:00:05.0 [ 38.663010] general protection fault: 0000 [#1] PREEMPT SMP

In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: fix use-after-free in nft_set_catchall_destroy() We need to use list_for_each_entry_safe() iterator because we can not access @catchall after kfree_rcu() call. syzbot reported: BUG: KASAN: use-after-free in nft_set_catchall_destroy net/netfilter/nf_tables_api.c:4486 [inline] BUG: KASAN: use-after-free in nft_set_destroy net/netfilter/nf_tables_api.c:4504 [inline] BUG: KASAN: use-after-free in nft_set_destroy+0x3fd/0x4f0 net/netfilter/nf_tables_api.c:4493 Read of size 8 at addr ffff8880716e5b80 by task syz-executor.3/8871 CPU: 1 PID: 8871 Comm: syz-executor.3 Not tainted 5.16.0-rc5-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106 print_address_description.constprop.0.cold+0x8d/0x2ed mm/kasan/report.c:247 __kasan_report mm/kasan/report.c:433 [inline] kasan_report.cold+0x83/0xdf mm/kasan/report.c:450 nft_set_catchall_destroy net/netfilter/nf_tables_api.c:4486 [inline] nft_set_destroy net/netfilter/nf_tables_api.c:4504 [inline] nft_set_destroy+0x3fd/0x4f0 net/netfilter/nf_tables_api.c:4493 __nft_release_table+0x79f/0xcd0 net/netfilter/nf_tables_api.c:9626 nft_rcv_nl_event+0x4f8/0x670 net/netfilter/nf_tables_api.c:9688 notifier_call_chain+0xb5/0x200 kernel/notifier.c:83 blocking_notifier_call_chain kernel/notifier.c:318 [inline] blocking_notifier_call_chain+0x67/0x90 kernel/notifier.c:306 netlink_release+0xcb6/0x1dd0 net/netlink/af_netlink.c:788 __sock_release+0xcd/0x280 net/socket.c:649 sock_close+0x18/0x20 net/socket.c:1314 __fput+0x286/0x9f0 fs/file_table.c:280 task_work_run+0xdd/0x1a0 kernel/task_work.c:164 tracehook_notify_resume include/linux/tracehook.h:189 [inline] exit_to_user_mode_loop kernel/entry/common.c:175 [inline] exit_to_user_mode_prepare+0x27e/0x290 kernel/entry/common.c:207 __syscall_exit_to_user_mode_work kernel/entry/common.c:289 [inline] syscall_exit_to_user_mode+0x19/0x60 kernel/entry/common.c:300 do_syscall_64+0x42/0xb0 arch/x86/entry/common.c:86 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f75fbf28adb Code: 0f 05 48 3d 00 f0 ff ff 77 45 c3 0f 1f 40 00 48 83 ec 18 89 7c 24 0c e8 63 fc ff ff 8b 7c 24 0c 41 89 c0 b8 03 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 35 44 89 c7 89 44 24 0c e8 a1 fc ff ff 8b 44 RSP: 002b:00007ffd8da7ec10 EFLAGS: 00000293 ORIG_RAX: 0000000000000003 RAX: 0000000000000000 RBX: 0000000000000004 RCX: 00007f75fbf28adb RDX: 00007f75fc08e828 RSI: ffffffffffffffff RDI: 0000000000000003 RBP: 00007f75fc08a960 R08: 0000000000000000 R09: 00007f75fc08e830 R10: 00007ffd8da7ed10 R11: 0000000000000293 R12: 00000000002067c3 R13: 00007ffd8da7ed10 R14: 00007f75fc088f60 R15: 0000000000000032 </TASK> Allocated by task 8886: kasan_save_stack+0x1e/0x50 mm/kasan/common.c:38 kasan_set_track mm/kasan/common.c:46 [inline] set_alloc_info mm/kasan/common.c:434 [inline] ____kasan_kmalloc mm/kasan/common.c:513 [inline] ____kasan_kmalloc mm/kasan/common.c:472 [inline] __kasan_kmalloc+0xa6/0xd0 mm/kasan/common.c:522 kasan_kmalloc include/linux/kasan.h:269 [inline] kmem_cache_alloc_trace+0x1ea/0x4a0 mm/slab.c:3575 kmalloc include/linux/slab.h:590 [inline] nft_setelem_catchall_insert net/netfilter/nf_tables_api.c:5544 [inline] nft_setelem_insert net/netfilter/nf_tables_api.c:5562 [inline] nft_add_set_elem+0x232e/0x2f40 net/netfilter/nf_tables_api.c:5936 nf_tables_newsetelem+0x6ff/0xbb0 net/netfilter/nf_tables_api.c:6032 nfnetlink_rcv_batch+0x1710/0x25f0 net/netfilter/nfnetlink.c:513 nfnetlink_rcv_skb_batch net/netfilter/nfnetlink.c:634 [inline] nfnetlink_rcv+0x3af/0x420 net/netfilter/nfnetlink.c:652 netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline] netlink_unicast+0x533/0x7d0 net/netlink/af_netlink.c:1345 netlink_sendmsg+0x904/0xdf0 net/netlink/af_netlink.c:1921 sock_sendmsg_nosec net/ ---truncated---

In the Linux kernel, the following vulnerability has been resolved: can: j1939: j1939_netdev_start(): fix UAF for rx_kref of j1939_priv It will trigger UAF for rx_kref of j1939_priv as following. cpu0 cpu1 j1939_sk_bind(socket0, ndev0, ...) j1939_netdev_start j1939_sk_bind(socket1, ndev0, ...) j1939_netdev_start j1939_priv_set j1939_priv_get_by_ndev_locked j1939_jsk_add ..... j1939_netdev_stop kref_put_lock(&priv->rx_kref, ...) kref_get(&priv->rx_kref, ...) REFCOUNT_WARN("addition on 0;...") ==================================================== refcount_t: addition on 0; use-after-free. WARNING: CPU: 1 PID: 20874 at lib/refcount.c:25 refcount_warn_saturate+0x169/0x1e0 RIP: 0010:refcount_warn_saturate+0x169/0x1e0 Call Trace: j1939_netdev_start+0x68b/0x920 j1939_sk_bind+0x426/0xeb0 ? security_socket_bind+0x83/0xb0 The rx_kref's kref_get() and kref_put() should use j1939_netdev_lock to protect.

In the Linux kernel, the following vulnerability has been resolved: atm: iphase: fix possible use-after-free in ia_module_exit() This module's remove path calls del_timer(). However, that function does not wait until the timer handler finishes. This means that the timer handler may still be running after the driver's remove function has finished, which would result in a use-after-free. Fix by calling del_timer_sync(), which makes sure the timer handler has finished, and unable to re-schedule itself.

In the Linux kernel, the following vulnerability has been resolved: can: dev: can_restart: fix use after free bug After calling netif_rx_ni(skb), dereferencing skb is unsafe. Especially, the can_frame cf which aliases skb memory is accessed after the netif_rx_ni() in: stats->rx_bytes += cf->len; Reordering the lines solves the issue.

In the Linux kernel, the following vulnerability has been resolved: arch_topology: Avoid use-after-free for scale_freq_data Currently topology_scale_freq_tick() (which gets called from scheduler_tick()) may end up using a pointer to "struct scale_freq_data", which was previously cleared by topology_clear_scale_freq_source(), as there is no protection in place here. The users of topology_clear_scale_freq_source() though needs a guarantee that the previously cleared scale_freq_data isn't used anymore, so they can free the related resources. Since topology_scale_freq_tick() is called from scheduler tick, we don't want to add locking in there. Use the RCU update mechanism instead (which is already used by the scheduler's utilization update path) to guarantee race free updates here. synchronize_rcu() makes sure that all RCU critical sections that started before it is called, will finish before it returns. And so the callers of topology_clear_scale_freq_source() don't need to worry about their callback getting called anymore.

In the Linux kernel, the following vulnerability has been resolved: net: marvell: prestera: fix double free issue on err path fix error path handling in prestera_bridge_port_join() that cases prestera driver to crash (see below). Trace: Internal error: Oops: 96000044 [#1] SMP Modules linked in: prestera_pci prestera uio_pdrv_genirq CPU: 1 PID: 881 Comm: ip Not tainted 5.15.0 #1 pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : prestera_bridge_destroy+0x2c/0xb0 [prestera] lr : prestera_bridge_port_join+0x2cc/0x350 [prestera] sp : ffff800011a1b0f0 ... x2 : ffff000109ca6c80 x1 : dead000000000100 x0 : dead000000000122 Call trace: prestera_bridge_destroy+0x2c/0xb0 [prestera] prestera_bridge_port_join+0x2cc/0x350 [prestera] prestera_netdev_port_event.constprop.0+0x3c4/0x450 [prestera] prestera_netdev_event_handler+0xf4/0x110 [prestera] raw_notifier_call_chain+0x54/0x80 call_netdevice_notifiers_info+0x54/0xa0 __netdev_upper_dev_link+0x19c/0x380

In the Linux kernel, the following vulnerability has been resolved: ath10k: Fix a use after free in ath10k_htc_send_bundle In ath10k_htc_send_bundle, the bundle_skb could be freed by dev_kfree_skb_any(bundle_skb). But the bundle_skb is used later by bundle_skb->len. As skb_len = bundle_skb->len, my patch replaces bundle_skb->len to skb_len after the bundle_skb was freed.

In the Linux kernel, the following vulnerability has been resolved: scsi: lpfc: Fix use-after-free in lpfc_unreg_rpi() routine An error is detected with the following report when unloading the driver: "KASAN: use-after-free in lpfc_unreg_rpi+0x1b1b" The NLP_REG_LOGIN_SEND nlp_flag is set in lpfc_reg_fab_ctrl_node(), but the flag is not cleared upon completion of the login. This allows a second call to lpfc_unreg_rpi() to proceed with nlp_rpi set to LPFC_RPI_ALLOW_ERROR. This results in a use after free access when used as an rpi_ids array index. Fix by clearing the NLP_REG_LOGIN_SEND nlp_flag in lpfc_mbx_cmpl_fc_reg_login().

In the Linux kernel, the following vulnerability has been resolved: ocfs2: mount fails with buffer overflow in strlen Starting with kernel 5.11 built with CONFIG_FORTIFY_SOURCE mouting an ocfs2 filesystem with either o2cb or pcmk cluster stack fails with the trace below. Problem seems to be that strings for cluster stack and cluster name are not guaranteed to be null terminated in the disk representation, while strlcpy assumes that the source string is always null terminated. This causes a read outside of the source string triggering the buffer overflow detection. detected buffer overflow in strlen ------------[ cut here ]------------ kernel BUG at lib/string.c:1149! invalid opcode: 0000 [#1] SMP PTI CPU: 1 PID: 910 Comm: mount.ocfs2 Not tainted 5.14.0-1-amd64 #1 Debian 5.14.6-2 RIP: 0010:fortify_panic+0xf/0x11 ... Call Trace: ocfs2_initialize_super.isra.0.cold+0xc/0x18 [ocfs2] ocfs2_fill_super+0x359/0x19b0 [ocfs2] mount_bdev+0x185/0x1b0 legacy_get_tree+0x27/0x40 vfs_get_tree+0x25/0xb0 path_mount+0x454/0xa20 __x64_sys_mount+0x103/0x140 do_syscall_64+0x3b/0xc0 entry_SYSCALL_64_after_hwframe+0x44/0xae

In the Linux kernel, the following vulnerability has been resolved: spi: spi-zynqmp-gqspi: fix use-after-free in zynqmp_qspi_exec_op When handling op->addr, it is using the buffer "tmpbuf" which has been freed. This will trigger a use-after-free KASAN warning. Let's use temporary variables to store op->addr.val and op->cmd.opcode to fix this issue.

In the Linux kernel, the following vulnerability has been resolved: tun: avoid double free in tun_free_netdev Avoid double free in tun_free_netdev() by moving the dev->tstats and tun->security allocs to a new ndo_init routine (tun_net_init()) that will be called by register_netdevice(). ndo_init is paired with the desctructor (tun_free_netdev()), so if there's an error in register_netdevice() the destructor will handle the frees. BUG: KASAN: double-free or invalid-free in selinux_tun_dev_free_security+0x1a/0x20 security/selinux/hooks.c:5605 CPU: 0 PID: 25750 Comm: syz-executor416 Not tainted 5.16.0-rc2-syzk #1 Hardware name: Red Hat KVM, BIOS Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x89/0xb5 lib/dump_stack.c:106 print_address_description.constprop.9+0x28/0x160 mm/kasan/report.c:247 kasan_report_invalid_free+0x55/0x80 mm/kasan/report.c:372 ____kasan_slab_free mm/kasan/common.c:346 [inline] __kasan_slab_free+0x107/0x120 mm/kasan/common.c:374 kasan_slab_free include/linux/kasan.h:235 [inline] slab_free_hook mm/slub.c:1723 [inline] slab_free_freelist_hook mm/slub.c:1749 [inline] slab_free mm/slub.c:3513 [inline] kfree+0xac/0x2d0 mm/slub.c:4561 selinux_tun_dev_free_security+0x1a/0x20 security/selinux/hooks.c:5605 security_tun_dev_free_security+0x4f/0x90 security/security.c:2342 tun_free_netdev+0xe6/0x150 drivers/net/tun.c:2215 netdev_run_todo+0x4df/0x840 net/core/dev.c:10627 rtnl_unlock+0x13/0x20 net/core/rtnetlink.c:112 __tun_chr_ioctl+0x80c/0x2870 drivers/net/tun.c:3302 tun_chr_ioctl+0x2f/0x40 drivers/net/tun.c:3311 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:874 [inline] __se_sys_ioctl fs/ioctl.c:860 [inline] __x64_sys_ioctl+0x19d/0x220 fs/ioctl.c:860 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3a/0x80 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae

In the Linux kernel, the following vulnerability has been resolved: can: peak_usb: fix use after free bugs After calling peak_usb_netif_rx_ni(skb), dereferencing skb is unsafe. Especially, the can_frame cf which aliases skb memory is accessed after the peak_usb_netif_rx_ni(). Reordering the lines solves the issue.

In the Linux kernel, the following vulnerability has been resolved: net: lantiq: fix memory corruption in RX ring In a situation where memory allocation or dma mapping fails, an invalid address is programmed into the descriptor. This can lead to memory corruption. If the memory allocation fails, DMA should reuse the previous skb and mapping and drop the packet. This patch also increments rx drop counter.

In the Linux kernel, the following vulnerability has been resolved: regmap: Fix possible double-free in regcache_rbtree_exit() In regcache_rbtree_insert_to_block(), when 'present' realloc failed, the 'blk' which is supposed to assign to 'rbnode->block' will be freed, so 'rbnode->block' points a freed memory, in the error handling path of regcache_rbtree_init(), 'rbnode->block' will be freed again in regcache_rbtree_exit(), KASAN will report double-free as follows: BUG: KASAN: double-free or invalid-free in kfree+0xce/0x390 Call Trace: slab_free_freelist_hook+0x10d/0x240 kfree+0xce/0x390 regcache_rbtree_exit+0x15d/0x1a0 regcache_rbtree_init+0x224/0x2c0 regcache_init+0x88d/0x1310 __regmap_init+0x3151/0x4a80 __devm_regmap_init+0x7d/0x100 madera_spi_probe+0x10f/0x333 [madera_spi] spi_probe+0x183/0x210 really_probe+0x285/0xc30 To fix this, moving up the assignment of rbnode->block to immediately after the reallocation has succeeded so that the data structure stays valid even if the second reallocation fails.

In the Linux kernel, the following vulnerability has been resolved: i40e: Fix use-after-free in i40e_client_subtask() Currently the call to i40e_client_del_instance frees the object pf->cinst, however pf->cinst->lan_info is being accessed after the free. Fix this by adding the missing return. Addresses-Coverity: ("Read from pointer after free")

In the Linux kernel, the following vulnerability has been resolved: nfsd: fix use-after-free due to delegation race A delegation break could arrive as soon as we've called vfs_setlease. A delegation break runs a callback which immediately (in nfsd4_cb_recall_prepare) adds the delegation to del_recall_lru. If we then exit nfs4_set_delegation without hashing the delegation, it will be freed as soon as the callback is done with it, without ever being removed from del_recall_lru. Symptoms show up later as use-after-free or list corruption warnings, usually in the laundromat thread. I suspect aba2072f4523 "nfsd: grant read delegations to clients holding writes" made this bug easier to hit, but I looked as far back as v3.0 and it looks to me it already had the same problem. So I'm not sure where the bug was introduced; it may have been there from the beginning.

In the Linux kernel, the following vulnerability has been resolved: bus: mhi: pci_generic: Fix possible use-after-free in mhi_pci_remove() This driver's remove path calls del_timer(). However, that function does not wait until the timer handler finishes. This means that the timer handler may still be running after the driver's remove function has finished, which would result in a use-after-free. Fix by calling del_timer_sync(), which makes sure the timer handler has finished, and unable to re-schedule itself.

In the Linux kernel, the following vulnerability has been resolved: dm rq: fix double free of blk_mq_tag_set in dev remove after table load fails When loading a device-mapper table for a request-based mapped device, and the allocation/initialization of the blk_mq_tag_set for the device fails, a following device remove will cause a double free. E.g. (dmesg): device-mapper: core: Cannot initialize queue for request-based dm-mq mapped device device-mapper: ioctl: unable to set up device queue for new table. Unable to handle kernel pointer dereference in virtual kernel address space Failing address: 0305e098835de000 TEID: 0305e098835de803 Fault in home space mode while using kernel ASCE. AS:000000025efe0007 R3:0000000000000024 Oops: 0038 ilc:3 [#1] SMP Modules linked in: ... lots of modules ... Supported: Yes, External CPU: 0 PID: 7348 Comm: multipathd Kdump: loaded Tainted: G W X 5.3.18-53-default #1 SLE15-SP3 Hardware name: IBM 8561 T01 7I2 (LPAR) Krnl PSW : 0704e00180000000 000000025e368eca (kfree+0x42/0x330) R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:3 CC:2 PM:0 RI:0 EA:3 Krnl GPRS: 000000000000004a 000000025efe5230 c1773200d779968d 0000000000000000 000000025e520270 000000025e8d1b40 0000000000000003 00000007aae10000 000000025e5202a2 0000000000000001 c1773200d779968d 0305e098835de640 00000007a8170000 000003ff80138650 000000025e5202a2 000003e00396faa8 Krnl Code: 000000025e368eb8: c4180041e100 lgrl %r1,25eba50b8 000000025e368ebe: ecba06b93a55 risbg %r11,%r10,6,185,58 #000000025e368ec4: e3b010000008 ag %r11,0(%r1) >000000025e368eca: e310b0080004 lg %r1,8(%r11) 000000025e368ed0: a7110001 tmll %r1,1 000000025e368ed4: a7740129 brc 7,25e369126 000000025e368ed8: e320b0080004 lg %r2,8(%r11) 000000025e368ede: b904001b lgr %r1,%r11 Call Trace: [<000000025e368eca>] kfree+0x42/0x330 [<000000025e5202a2>] blk_mq_free_tag_set+0x72/0xb8 [<000003ff801316a8>] dm_mq_cleanup_mapped_device+0x38/0x50 [dm_mod] [<000003ff80120082>] free_dev+0x52/0xd0 [dm_mod] [<000003ff801233f0>] __dm_destroy+0x150/0x1d0 [dm_mod] [<000003ff8012bb9a>] dev_remove+0x162/0x1c0 [dm_mod] [<000003ff8012a988>] ctl_ioctl+0x198/0x478 [dm_mod] [<000003ff8012ac8a>] dm_ctl_ioctl+0x22/0x38 [dm_mod] [<000000025e3b11ee>] ksys_ioctl+0xbe/0xe0 [<000000025e3b127a>] __s390x_sys_ioctl+0x2a/0x40 [<000000025e8c15ac>] system_call+0xd8/0x2c8 Last Breaking-Event-Address: [<000000025e52029c>] blk_mq_free_tag_set+0x6c/0xb8 Kernel panic - not syncing: Fatal exception: panic_on_oops When allocation/initialization of the blk_mq_tag_set fails in dm_mq_init_request_queue(), it is uninitialized/freed, but the pointer is not reset to NULL; so when dev_remove() later gets into dm_mq_cleanup_mapped_device() it sees the pointer and tries to uninitialize and free it again. Fix this by setting the pointer to NULL in dm_mq_init_request_queue() error-handling. Also set it to NULL in dm_mq_cleanup_mapped_device().

In the Linux kernel, the following vulnerability has been resolved: sctp: do asoc update earlier in sctp_sf_do_dupcook_a There's a panic that occurs in a few of envs, the call trace is as below: [] general protection fault, ... 0x29acd70f1000a: 0000 [#1] SMP PTI [] RIP: 0010:sctp_ulpevent_notify_peer_addr_change+0x4b/0x1fa [sctp] [] sctp_assoc_control_transport+0x1b9/0x210 [sctp] [] sctp_do_8_2_transport_strike.isra.16+0x15c/0x220 [sctp] [] sctp_cmd_interpreter.isra.21+0x1231/0x1a10 [sctp] [] sctp_do_sm+0xc3/0x2a0 [sctp] [] sctp_generate_timeout_event+0x81/0xf0 [sctp] This is caused by a transport use-after-free issue. When processing a duplicate COOKIE-ECHO chunk in sctp_sf_do_dupcook_a(), both COOKIE-ACK and SHUTDOWN chunks are allocated with the transort from the new asoc. However, later in the sideeffect machine, the old asoc is used to send them out and old asoc's shutdown_last_sent_to is set to the transport that SHUTDOWN chunk attached to in sctp_cmd_setup_t2(), which actually belongs to the new asoc. After the new_asoc is freed and the old asoc T2 timeout, the old asoc's shutdown_last_sent_to that is already freed would be accessed in sctp_sf_t2_timer_expire(). Thanks Alexander and Jere for helping dig into this issue. To fix it, this patch is to do the asoc update first, then allocate the COOKIE-ACK and SHUTDOWN chunks with the 'updated' old asoc. This would make more sense, as a chunk from an asoc shouldn't be sent out with another asoc. We had fixed quite a few issues caused by this.

In the Linux kernel, the following vulnerability has been resolved: net: fix use-after-free in tw_timer_handler A real world panic issue was found as follow in Linux 5.4. BUG: unable to handle page fault for address: ffffde49a863de28 PGD 7e6fe62067 P4D 7e6fe62067 PUD 7e6fe63067 PMD f51e064067 PTE 0 RIP: 0010:tw_timer_handler+0x20/0x40 Call Trace: <IRQ> call_timer_fn+0x2b/0x120 run_timer_softirq+0x1ef/0x450 __do_softirq+0x10d/0x2b8 irq_exit+0xc7/0xd0 smp_apic_timer_interrupt+0x68/0x120 apic_timer_interrupt+0xf/0x20 This issue was also reported since 2017 in the thread [1], unfortunately, the issue was still can be reproduced after fixing DCCP. The ipv4_mib_exit_net is called before tcp_sk_exit_batch when a net namespace is destroyed since tcp_sk_ops is registered befrore ipv4_mib_ops, which means tcp_sk_ops is in the front of ipv4_mib_ops in the list of pernet_list. There will be a use-after-free on net->mib.net_statistics in tw_timer_handler after ipv4_mib_exit_net if there are some inflight time-wait timers. This bug is not introduced by commit f2bf415cfed7 ("mib: add net to NET_ADD_STATS_BH") since the net_statistics is a global variable instead of dynamic allocation and freeing. Actually, commit 61a7e26028b9 ("mib: put net statistics on struct net") introduces the bug since it put net statistics on struct net and free it when net namespace is destroyed. Moving init_ipv4_mibs() to the front of tcp_init() to fix this bug and replace pr_crit() with panic() since continuing is meaningless when init_ipv4_mibs() fails. [1] https://groups.google.com/g/syzkaller/c/p1tn-_Kc6l4/m/smuL_FMAAgAJ?pli=1

In the Linux kernel, the following vulnerability has been resolved: media: davinci: vpif: fix use-after-free on driver unbind The driver allocates and registers two platform device structures during probe, but the devices were never deregistered on driver unbind. This results in a use-after-free on driver unbind as the device structures were allocated using devres and would be freed by driver core when remove() returns. Fix this by adding the missing deregistration calls to the remove() callback and failing probe on registration errors. Note that the platform device structures must be freed using a proper release callback to avoid leaking associated resources like device names.

In the Linux kernel, the following vulnerability has been resolved: can: vxcan: vxcan_xmit: fix use after free bug After calling netif_rx_ni(skb), dereferencing skb is unsafe. Especially, the canfd_frame cfd which aliases skb memory is accessed after the netif_rx_ni().

In the Linux kernel, the following vulnerability has been resolved: cfg80211: call cfg80211_stop_ap when switch from P2P_GO type If the userspace tools switch from NL80211_IFTYPE_P2P_GO to NL80211_IFTYPE_ADHOC via send_msg(NL80211_CMD_SET_INTERFACE), it does not call the cleanup cfg80211_stop_ap(), this leads to the initialization of in-use data. For example, this path re-init the sdata->assigned_chanctx_list while it is still an element of assigned_vifs list, and makes that linked list corrupt.

In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Fix use-after-free of encap entry in neigh update handler Function mlx5e_rep_neigh_update() wasn't updated to accommodate rtnl lock removal from TC filter update path and properly handle concurrent encap entry insertion/deletion which can lead to following use-after-free: [23827.464923] ================================================================== [23827.469446] BUG: KASAN: use-after-free in mlx5e_encap_take+0x72/0x140 [mlx5_core] [23827.470971] Read of size 4 at addr ffff8881d132228c by task kworker/u20:6/21635 [23827.472251] [23827.472615] CPU: 9 PID: 21635 Comm: kworker/u20:6 Not tainted 5.13.0-rc3+ #5 [23827.473788] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 [23827.475639] Workqueue: mlx5e mlx5e_rep_neigh_update [mlx5_core] [23827.476731] Call Trace: [23827.477260] dump_stack+0xbb/0x107 [23827.477906] print_address_description.constprop.0+0x18/0x140 [23827.478896] ? mlx5e_encap_take+0x72/0x140 [mlx5_core] [23827.479879] ? mlx5e_encap_take+0x72/0x140 [mlx5_core] [23827.480905] kasan_report.cold+0x7c/0xd8 [23827.481701] ? mlx5e_encap_take+0x72/0x140 [mlx5_core] [23827.482744] kasan_check_range+0x145/0x1a0 [23827.493112] mlx5e_encap_take+0x72/0x140 [mlx5_core] [23827.494054] ? mlx5e_tc_tun_encap_info_equal_generic+0x140/0x140 [mlx5_core] [23827.495296] mlx5e_rep_neigh_update+0x41e/0x5e0 [mlx5_core] [23827.496338] ? mlx5e_rep_neigh_entry_release+0xb80/0xb80 [mlx5_core] [23827.497486] ? read_word_at_a_time+0xe/0x20 [23827.498250] ? strscpy+0xa0/0x2a0 [23827.498889] process_one_work+0x8ac/0x14e0 [23827.499638] ? lockdep_hardirqs_on_prepare+0x400/0x400 [23827.500537] ? pwq_dec_nr_in_flight+0x2c0/0x2c0 [23827.501359] ? rwlock_bug.part.0+0x90/0x90 [23827.502116] worker_thread+0x53b/0x1220 [23827.502831] ? process_one_work+0x14e0/0x14e0 [23827.503627] kthread+0x328/0x3f0 [23827.504254] ? _raw_spin_unlock_irq+0x24/0x40 [23827.505065] ? __kthread_bind_mask+0x90/0x90 [23827.505912] ret_from_fork+0x1f/0x30 [23827.506621] [23827.506987] Allocated by task 28248: [23827.507694] kasan_save_stack+0x1b/0x40 [23827.508476] __kasan_kmalloc+0x7c/0x90 [23827.509197] mlx5e_attach_encap+0xde1/0x1d40 [mlx5_core] [23827.510194] mlx5e_tc_add_fdb_flow+0x397/0xc40 [mlx5_core] [23827.511218] __mlx5e_add_fdb_flow+0x519/0xb30 [mlx5_core] [23827.512234] mlx5e_configure_flower+0x191c/0x4870 [mlx5_core] [23827.513298] tc_setup_cb_add+0x1d5/0x420 [23827.514023] fl_hw_replace_filter+0x382/0x6a0 [cls_flower] [23827.514975] fl_change+0x2ceb/0x4a51 [cls_flower] [23827.515821] tc_new_tfilter+0x89a/0x2070 [23827.516548] rtnetlink_rcv_msg+0x644/0x8c0 [23827.517300] netlink_rcv_skb+0x11d/0x340 [23827.518021] netlink_unicast+0x42b/0x700 [23827.518742] netlink_sendmsg+0x743/0xc20 [23827.519467] sock_sendmsg+0xb2/0xe0 [23827.520131] ____sys_sendmsg+0x590/0x770 [23827.520851] ___sys_sendmsg+0xd8/0x160 [23827.521552] __sys_sendmsg+0xb7/0x140 [23827.522238] do_syscall_64+0x3a/0x70 [23827.522907] entry_SYSCALL_64_after_hwframe+0x44/0xae [23827.523797] [23827.524163] Freed by task 25948: [23827.524780] kasan_save_stack+0x1b/0x40 [23827.525488] kasan_set_track+0x1c/0x30 [23827.526187] kasan_set_free_info+0x20/0x30 [23827.526968] __kasan_slab_free+0xed/0x130 [23827.527709] slab_free_freelist_hook+0xcf/0x1d0 [23827.528528] kmem_cache_free_bulk+0x33a/0x6e0 [23827.529317] kfree_rcu_work+0x55f/0xb70 [23827.530024] process_one_work+0x8ac/0x14e0 [23827.530770] worker_thread+0x53b/0x1220 [23827.531480] kthread+0x328/0x3f0 [23827.532114] ret_from_fork+0x1f/0x30 [23827.532785] [23827.533147] Last potentially related work creation: [23827.534007] kasan_save_stack+0x1b/0x40 [23827.534710] kasan_record_aux_stack+0xab/0xc0 [23827.535492] kvfree_call_rcu+0x31/0x7b0 [23827.536206] mlx5e_tc_del ---truncated---

In the Linux kernel, the following vulnerability has been resolved: bus: mhi: core: Validate channel ID when processing command completions MHI reads the channel ID from the event ring element sent by the device which can be any value between 0 and 255. In order to prevent any out of bound accesses, add a check against the maximum number of channels supported by the controller and those channels not configured yet so as to skip processing of that event ring element.

In the Linux kernel, the following vulnerability has been resolved: net/mlx4_en: Fix an use-after-free bug in mlx4_en_try_alloc_resources() In mlx4_en_try_alloc_resources(), mlx4_en_copy_priv() is called and tmp->tx_cq will be freed on the error path of mlx4_en_copy_priv(). After that mlx4_en_alloc_resources() is called and there is a dereference of &tmp->tx_cq[t][i] in mlx4_en_alloc_resources(), which could lead to a use after free problem on failure of mlx4_en_copy_priv(). Fix this bug by adding a check of mlx4_en_copy_priv() This bug was found by a static analyzer. The analysis employs differential checking to identify inconsistent security operations (e.g., checks or kfrees) between two code paths and confirms that the inconsistent operations are not recovered in the current function or the callers, so they constitute bugs. Note that, as a bug found by static analysis, it can be a false positive or hard to trigger. Multiple researchers have cross-reviewed the bug. Builds with CONFIG_MLX4_EN=m show no new warnings, and our static analyzer no longer warns about this code.

In the Linux kernel, the following vulnerability has been resolved: ext4: convert inline data to extents when truncate exceeds inline size Add a check in ext4_setattr() to convert files from inline data storage to extent-based storage when truncate() grows the file size beyond the inline capacity. This prevents the filesystem from entering an inconsistent state where the inline data flag is set but the file size exceeds what can be stored inline. Without this fix, the following sequence causes a kernel BUG_ON(): 1. Mount filesystem with inode that has inline flag set and small size 2. truncate(file, 50MB) - grows size but inline flag remains set 3. sendfile() attempts to write data 4. ext4_write_inline_data() hits BUG_ON(write_size > inline_capacity) The crash occurs because ext4_write_inline_data() expects inline storage to accommodate the write, but the actual inline capacity (~60 bytes for i_block + ~96 bytes for xattrs) is far smaller than the file size and write request. The fix checks if the new size from setattr exceeds the inode's actual inline capacity (EXT4_I(inode)->i_inline_size) and converts the file to extent-based storage before proceeding with the size change. This addresses the root cause by ensuring the inline data flag and file size remain consistent during truncate operations.

Possible buffer overflow in the hypervisor. Inappropriate usage of a static array could lead to a buffer overrun. Product: Android. Versions: Kernel 3.18. Android ID: A-31625904. References: QC-CR#1027769.

In the Linux kernel, the following vulnerability has been resolved: tracing: Fix trace_marker copy link list updates When the "copy_trace_marker" option is enabled for an instance, anything written into /sys/kernel/tracing/trace_marker is also copied into that instances buffer. When the option is set, that instance's trace_array descriptor is added to the marker_copies link list. This list is protected by RCU, as all iterations uses an RCU protected list traversal. When the instance is deleted, all the flags that were enabled are cleared. This also clears the copy_trace_marker flag and removes the trace_array descriptor from the list. The issue is after the flags are called, a direct call to update_marker_trace() is performed to clear the flag. This function returns true if the state of the flag changed and false otherwise. If it returns true here, synchronize_rcu() is called to make sure all readers see that its removed from the list. But since the flag was already cleared, the state does not change and the synchronization is never called, leaving a possible UAF bug. Move the clearing of all flags below the updating of the copy_trace_marker option which then makes sure the synchronization is performed. Also use the flag for checking the state in update_marker_trace() instead of looking at if the list is empty.

In the Linux kernel, the following vulnerability has been resolved: Input: uinput - fix circular locking dependency with ff-core A lockdep circular locking dependency warning can be triggered reproducibly when using a force-feedback gamepad with uinput (for example, playing ELDEN RING under Wine with a Flydigi Vader 5 controller): ff->mutex -> udev->mutex -> input_mutex -> dev->mutex -> ff->mutex The cycle is caused by four lock acquisition paths: 1. ff upload: input_ff_upload() holds ff->mutex and calls uinput_dev_upload_effect() -> uinput_request_submit() -> uinput_request_send(), which acquires udev->mutex. 2. device create: uinput_ioctl_handler() holds udev->mutex and calls uinput_create_device() -> input_register_device(), which acquires input_mutex. 3. device register: input_register_device() holds input_mutex and calls kbd_connect() -> input_register_handle(), which acquires dev->mutex. 4. evdev release: evdev_release() calls input_flush_device() under dev->mutex, which calls input_ff_flush() acquiring ff->mutex. Fix this by introducing a new state_lock spinlock to protect udev->state and udev->dev access in uinput_request_send() instead of acquiring udev->mutex. The function only needs to atomically check device state and queue an input event into the ring buffer via uinput_dev_event() -- both operations are safe under a spinlock (ktime_get_ts64() and wake_up_interruptible() do not sleep). This breaks the ff->mutex -> udev->mutex link since a spinlock is a leaf in the lock ordering and cannot form cycles with mutexes. To keep state transitions visible to uinput_request_send(), protect writes to udev->state in uinput_create_device() and uinput_destroy_device() with the same state_lock spinlock. Additionally, move init_completion(&request->done) from uinput_request_send() to uinput_request_submit() before uinput_request_reserve_slot(). Once the slot is allocated, uinput_flush_requests() may call complete() on it at any time from the destroy path, so the completion must be initialised before the request becomes visible. Lock ordering after the fix: ff->mutex -> state_lock (spinlock, leaf) udev->mutex -> state_lock (spinlock, leaf) udev->mutex -> input_mutex -> dev->mutex -> ff->mutex (no back-edge)

In the Linux kernel, the following vulnerability has been resolved: batman-adv: avoid OGM aggregation when skb tailroom is insufficient When OGM aggregation state is toggled at runtime, an existing forwarded packet may have been allocated with only packet_len bytes, while a later packet can still be selected for aggregation. Appending in this case can hit skb_put overflow conditions. Reject aggregation when the target skb tailroom cannot accommodate the new packet. The caller then falls back to creating a new forward packet instead of appending.

In the Linux kernel, the following vulnerability has been resolved: virtio_net: Fix UAF on dst_ops when IFF_XMIT_DST_RELEASE is cleared and napi_tx is false A UAF issue occurs when the virtio_net driver is configured with napi_tx=N and the device's IFF_XMIT_DST_RELEASE flag is cleared (e.g., during the configuration of tc route filter rules). When IFF_XMIT_DST_RELEASE is removed from the net_device, the network stack expects the driver to hold the reference to skb->dst until the packet is fully transmitted and freed. In virtio_net with napi_tx=N, skbs may remain in the virtio transmit ring for an extended period. If the network namespace is destroyed while these skbs are still pending, the corresponding dst_ops structure has freed. When a subsequent packet is transmitted, free_old_xmit() is triggered to clean up old skbs. It then calls dst_release() on the skb associated with the stale dst_entry. Since the dst_ops (referenced by the dst_entry) has already been freed, a UAF kernel paging request occurs. fix it by adds skb_dst_drop(skb) in start_xmit to explicitly release the dst reference before the skb is queued in virtio_net. Call Trace: Unable to handle kernel paging request at virtual address ffff80007e150000 CPU: 2 UID: 0 PID: 6236 Comm: ping Kdump: loaded Not tainted 7.0.0-rc1+ #6 PREEMPT ... percpu_counter_add_batch+0x3c/0x158 lib/percpu_counter.c:98 (P) dst_release+0xe0/0x110 net/core/dst.c:177 skb_release_head_state+0xe8/0x108 net/core/skbuff.c:1177 sk_skb_reason_drop+0x54/0x2d8 net/core/skbuff.c:1255 dev_kfree_skb_any_reason+0x64/0x78 net/core/dev.c:3469 napi_consume_skb+0x1c4/0x3a0 net/core/skbuff.c:1527 __free_old_xmit+0x164/0x230 drivers/net/virtio_net.c:611 [virtio_net] free_old_xmit drivers/net/virtio_net.c:1081 [virtio_net] start_xmit+0x7c/0x530 drivers/net/virtio_net.c:3329 [virtio_net] ... Reproduction Steps: NETDEV="enp3s0" config_qdisc_route_filter() { tc qdisc del dev $NETDEV root tc qdisc add dev $NETDEV root handle 1: prio tc filter add dev $NETDEV parent 1:0 \ protocol ip prio 100 route to 100 flowid 1:1 ip route add 192.168.1.100/32 dev $NETDEV realm 100 } test_ns() { ip netns add testns ip link set $NETDEV netns testns ip netns exec testns ifconfig $NETDEV 10.0.32.46/24 ip netns exec testns ping -c 1 10.0.32.1 ip netns del testns } config_qdisc_route_filter test_ns sleep 2 test_ns

In the Linux kernel, the following vulnerability has been resolved: ALSA: ctxfi: Fix missing SPDIFI1 index handling SPDIF1 DAIO type isn't properly handled in daio_device_index() for hw20k2, and it returned -EINVAL, which ended up with the out-of-bounds array access. Follow the hw20k1 pattern and return the proper index for this type, too.

In the Linux kernel, the following vulnerability has been resolved: media: mc, v4l2: serialize REINIT and REQBUFS with req_queue_mutex MEDIA_REQUEST_IOC_REINIT can run concurrently with VIDIOC_REQBUFS(0) queue teardown paths. This can race request object cleanup against vb2 queue cancellation and lead to use-after-free reports. We already serialize request queueing against STREAMON/OFF with req_queue_mutex. Extend that serialization to REQBUFS, and also take the same mutex in media_request_ioctl_reinit() so REINIT is in the same exclusion domain. This keeps request cleanup and queue cancellation from running in parallel for request-capable devices.