The WebUI of PHOENIX CONTACT FL SWITCH 3xxx, 4xxx, 48xx versions 1.0 to 1.34 allows for plaintext transmission (HTTP) of user credentials by default.

The WebUI of PHOENIX CONTACT FL SWITCH 3xxx, 4xxx, 48xx versions prior to 1.35 is vulnerable to brute-force attacks, because of Improper Restriction of Excessive Authentication Attempts.

An unauthenticated, remote attacker could upload malicious logic to the devices based on ProConOS/ProConOS eCLR in order to gain full control over the device.

An unauthenticated, remote attacker could upload malicious logic to devices based on ProConOS/ProConOS eCLR in order to gain full control over the device.

On Phoenix Contact PLCnext Control Devices versions before 2021.0 LTS an attacker can use this vulnerability i.e. to open a reverse shell with root privileges.

It was found that spacewalk-channel can be used by a non-admin user or disabled users to perform administrative tasks due to an incorrect authorization check in backend/server/rhnChannel.py.

Red Hat 3scale (aka RH-3scale) API Management Platform (AMP) before 2.0.0 would permit creation of an access token without a client secret. An attacker could use this flaw to circumvent authentication controls and gain access to restricted APIs. NOTE: some sources have a typo in which CVE-2017-7512 maps to an OpenVPN vulnerability. The proper CVE ID for that OpenVPN vulnerability is CVE-2017-7521. Specifically, CVE-2017-7521 is the correct CVE ID for TWO closely related findings in OpenVPN. Any source that lists BOTH CVE-2017-7512 and CVE-2017-7521 for OpenVPN should have listed ONLY CVE-2017-7521.

An Improper Authorization issue was discovered in Sierra Wireless AirLink Raven XE, all versions prior to 4.0.14, and AirLink Raven XT, all versions prior to 4.0.11. Several files and directories can be accessed without authentication, which may allow a remote attacker to perform sensitive functions including arbitrary file upload, file download, and device reboot.

4MOSAn GCB Doctor’s login page has improper validation of Cookie, which allows an unauthenticated remote attacker to bypass authentication by code injection in cookie, and arbitrarily manipulate the system or interrupt services by upload and execution of arbitrary files.

Splunk Web in Splunk Enterprise 7.0.x before 7.0.0.1, 6.6.x before 6.6.3.2, 6.5.x before 6.5.6, 6.4.x before 6.4.9, and 6.3.x before 6.3.12, when the SAML authType is enabled, mishandles SAML, which allows remote attackers to bypass intended access restrictions or conduct impersonation attacks.

An insufficient authorization vulnerability in web component of EPMM prior to 12.1.0.1 allows an unauthorized attacker within the network to execute arbitrary commands on the underlying operating system of the appliance.

BAB TECHNOLOGIE GmbH eibPort V3 prior version 3.9.1 allow unauthenticated attackers access to /tmp path which contains some sensitive data (e.g. device serial number). Having those info, a possible loginId can be self-calculated in a brute force attack against BMX interface. This is usable and part of an attack chain to gain SSH root access.

The WDB target agent debug service in Wind River VxWorks 6.x, 5.x, and earlier, as used on the Rockwell Automation 1756-ENBT series A with firmware 3.2.6 and 3.6.1 and other products, allows remote attackers to read or modify arbitrary memory locations, perform function calls, or manage tasks via requests to UDP port 17185, a related issue to CVE-2005-3804.

The Scanner File Utility (aka listener) in Kyocera Mita (KM) 3.3.0.1 allows remote attackers to bypass authorization and upload arbitrary files to the client system via a modified program that does not prompt the user for a password.

An issue was discovered in slicer69 doas before 6.2 on certain platforms other than OpenBSD. On platforms without strtonum(3), sscanf was used without checking for error cases. Instead, the uninitialized variable errstr was checked and in some cases returned success even if sscanf failed. The result was that, instead of reporting that the supplied username or group name did not exist, it would execute the command as root.

In Webgalamb through 7.0, system/ajax.php functionality is supposed to be available only to the administrator. However, by using one of the bgsend, atment_sddd1xGz, or xls_bgimport query parameters, most of these methods become available to unauthenticated users.

The REST API component of TIBCO Software Inc.'s TIBCO JasperReports Server, TIBCO JasperReports Server Community Edition, TIBCO JasperReports Server for ActiveMatrix BPM, TIBCO Jaspersoft for AWS with Multi-Tenancy, and TIBCO Jaspersoft Reporting and Analytics for AWS contains a vulnerability that theoretically allows unauthenticated users to bypass authorization checks for portions of the HTTP interface to the JasperReports Server. Affected releases are TIBCO Software Inc.'s TIBCO JasperReports Server: 6.4.0; 6.4.1; 6.4.2; 6.4.3; 7.1.0, TIBCO JasperReports Server Community Edition: versions up to and including 7.1.0, TIBCO JasperReports Server for ActiveMatrix BPM: versions up to and including 6.4.3, TIBCO Jaspersoft for AWS with Multi-Tenancy: versions up to and including 7.1.0, and TIBCO Jaspersoft Reporting and Analytics for AWS: versions up to and including 7.1.0.

Huawei XH620 V3, XH622 V3, and XH628 V3 servers with software before V100R003C00SPC610, RH1288 V3 servers with software before V100R003C00SPC613, RH2288 V3 servers with software before V100R003C00SPC617, and RH2288H V3 servers with software before V100R003C00SPC515 allow remote attackers to obtain passwords via a brute-force attack, related to "lack of authentication protection mechanisms."

Moxa OnCell G3100V2 devices before 2.8 and G3111, G3151, G3211, and G3251 devices before 1.7 do not properly restrict authentication attempts, which makes it easier for remote attackers to obtain access via a brute-force attack.

General Electric (GE) Bently Nevada 3500/22M USB with firmware before 5.0 and Bently Nevada 3500/22M Serial have open ports, which makes it easier for remote attackers to obtain privileged access via unspecified vectors.

Portainer 1.24.1 and earlier is affected by incorrect access control that may lead to remote arbitrary code execution. The restriction checks for bind mounts are applied only on the client-side and not the server-side, which can lead to spawning a container with bind mount. Once such a container is spawned, it can be leveraged to break out of the container leading to complete Docker host machine takeover.

Incorrect access control in nasapi in Buffalo TS5600D1206 version 3.61-0.10 allows attackers to bypass authentication by sending a modified HTTP Host header.

An issue was discovered in SMA Solar Technology products. A secondary authentication system is available for Installers called the Grid Guard system. This system uses predictable codes, and a single Grid Guard code can be used on any SMA inverter. Any such code, when combined with the installer account, allows changing very sensitive parameters. NOTE: the vendor reports that Grid Guard is not an authentication feature; it is only a tracing feature. Also, only Sunny Boy TLST-21 and TL-21 and Sunny Tripower TL-10 and TL-30 could potentially be affected

An Improper Authorization issue was discovered in OSIsoft PI Integrator for Business Analytics before 2016 R2, PI Integrator for Microsoft Azure before 2016 R2 SP1, and PI Integrator for SAP HANA before 2017. An attacker is able to gain privileged access to the system while unauthorized.

EMC ViPR SRM before 3.7.2 does not restrict the number of password-authentication attempts, which makes it easier for remote attackers to obtain access via a brute-force guessing attack.

In Festo Controller CECC-X-M1 product family in multiple versions, the http-endpoint "cecc-x-web-viewer-request-off" POST request doesn’t check for port syntax. This can result in unauthorized execution of system commands with root privileges due to improper access control command injection.

In Festo Controller CECC-X-M1 product family in multiple versions, the http-endpoint "cecc-x-refresh-request" POST request doesn’t check for port syntax. This can result in unauthorized execution of system commands with root privileges due to improper access control command injection.

In Festo Controller CECC-X-M1 product family in multiple versions, the http-endpoint "cecc-x-acknerr-request" POST request doesn’t check for port syntax. This can result in unauthorized execution of system commands with root privileges due to improper access control command injection.

In Festo Controller CECC-X-M1 product family in multiple versions, the http-endpoint "cecc-x-web-viewer-request-on" POST request doesn’t check for port syntax. This can result in unauthorized execution of system commands with root privileges due to improper access control command injection.

AxiomSL's Axiom java applet module (used for editing uploaded Excel files and associated Java RMI services) 9.5.3 and earlier allows remote attackers to (1) access data of other basic users through arbitrary SQL commands, (2) perform a horizontal and vertical privilege escalation, (3) cause a Denial of Service on global application, or (4) write/read/delete arbitrary files on server hosting the application.

A vulnerability, which was classified as very critical, was found in IROAD Dash Cam X5 and Dash Cam X6 up to 20250308. This affects an unknown part. The manipulation leads to improper authorization. It is possible to initiate the attack remotely. The vendor was contacted early about this disclosure but did not respond in any way.

Incorrect configuration in deb package in ClickHouse before 1.1.54131 could lead to unauthorized use of the database.

Improper Authorization in GitHub repository kromitgmbh/titra prior to 0.79.1.

Luocms v2.0 is affected by an incorrect access control vulnerability. Through /admin/templates/template_manage.php, an attacker can write an arbitrary shell file.

Password authentication bypass vulnerability for local accounts can be used to bypass local authentication checks.

WebExtensions bundled with embedded experiments were not correctly checked for proper authorization. This allowed a malicious WebExtension to gain full browser permissions. This vulnerability affects Firefox ESR < 60.1 and Firefox < 61.

OpenFlow version 1.0 onwards contains a Denial of Service and Improper authorization vulnerability in OpenFlow handshake: The DPID (DataPath IDentifier) in the features_reply message are inherently trusted by the controller. that can result in Denial of Service, Unauthorized Access, Network Instability. This attack appear to be exploitable via Network connectivity: the attacker must first establish a transport connection with the OpenFlow controller and then initiate the OpenFlow handshake.

MMP: All versions prior to v1.0.3, PTP C-series: Device versions prior to v2.8.6.1, and PTMP C-series and A5x: Device versions prior to v2.5.4.1 does not perform proper authorization and authentication checks on multiple API routes. An attacker may gain access to these API routes and achieve remote code execution, create a denial-of-service condition, and obtain sensitive information.

A vulnerability in the web management interface of Cisco Prime License Manager (PLM) Software could allow an unauthenticated, remote attacker to gain unauthorized access to an affected device. The vulnerability is due to insufficient validation of user input on the web management interface. An attacker could exploit this vulnerability by submitting a malicious request to an affected system. An exploit could allow the attacker to gain administrative-level privileges on the system. The attacker needs a valid username to exploit this vulnerability.

A vulnerability in the authorization controls for the Cisco IOx application hosting infrastructure in Cisco IOS XE Software could allow an unauthenticated, remote attacker to execute Cisco IOx API commands without proper authorization. The vulnerability is due to incorrect handling of requests for authorization tokens. An attacker could exploit this vulnerability by using a crafted API call to request such a token. An exploit could allow the attacker to obtain an authorization token and execute any of the IOx API commands on an affected device.

MMP: All versions prior to v1.0.3, PTP C-series: Device versions prior to v2.8.6.1, and PTMP C-series and A5x: Device versions prior to v2.5.4.1 does not perform proper authorization checks on multiple API functions. An attacker may gain access to these functions and achieve remote code execution, create a denial-of-service condition, and obtain sensitive information.

In lunary-ai/lunary version v1.4.28, the /bigquery API route lacks proper access control, allowing any logged-in user to create a Datastream to Google BigQuery and export the entire database. This includes sensitive data such as password hashes and secret API keys. The route is protected by a config check (`config.DATA_WAREHOUSE_EXPORTS_ALLOWED`), but it does not verify the user's access level or implement any access control middleware. This vulnerability can lead to the extraction of sensitive data, disruption of services, credential compromise, and service integrity breaches.

Canonical snapd before version 2.37.1 incorrectly performed socket owner validation, allowing an attacker to run arbitrary commands as root. This issue affects: Canonical snapd versions prior to 2.37.1.

ProjectSend (formerly cFTP) r582 allows Insecure Direct Object Reference via includes/actions.log.export.php.