Voltronic Power ViewPower Pro getMacAddressByIp Command Injection Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of Voltronic Power ViewPower Pro. Authentication is not required to exploit this vulnerability. The specific flaw exists within the getMacAddressByIP function. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of SYSTEM. Was ZDI-CAN-21163.

A OS command injection vulnerability in the CGI program of Zyxel USG FLEX 100(W) firmware versions 5.00 through 5.21 Patch 1, USG FLEX 200 firmware versions 5.00 through 5.21 Patch 1, USG FLEX 500 firmware versions 5.00 through 5.21 Patch 1, USG FLEX 700 firmware versions 5.00 through 5.21 Patch 1, USG FLEX 50(W) firmware versions 5.10 through 5.21 Patch 1, USG20(W)-VPN firmware versions 5.10 through 5.21 Patch 1, ATP series firmware versions 5.10 through 5.21 Patch 1, VPN series firmware versions 4.60 through 5.21 Patch 1, which could allow an attacker to modify specific files and then execute some OS commands on a vulnerable device.

Multiple vulnerabilities in the web UI of Cisco Smart Software Manager Satellite could allow an unauthenticated, remote attacker to execute arbitrary commands on the underlying operating system. For more information about these vulnerabilities, see the Details section of this advisory.

Crestron TSW-1060, TSW-760, TSW-560, TSW-1060-NC, TSW-760-NC, and TSW-560-NC devices before 2.001.0037.001 allow unauthenticated remote code execution via command injection in Crestron Toolbox Protocol (CTP).

In Festo Controller CECC-X-M1 product family in multiple versions, the http-endpoint "cecc-x-web-viewer-request-on" POST request doesn’t check for port syntax. This can result in unauthorized execution of system commands with root privileges due to improper access control command injection.

A remote unauthenticated user can execute commands as root in the Belkin N750 using firmware version 1.10.22 by sending a crafted HTTP request to twonky_command.cgi.

Remote code execution is possible in Cloudera Data Science Workbench version 1.3.0 and prior releases via unspecified attack vectors.

In Festo Controller CECC-X-M1 product family in multiple versions, the http-endpoint "cecc-x-refresh-request" POST request doesn’t check for port syntax. This can result in unauthorized execution of system commands with root privileges due to improper access control command injection.

The '/common/download_agent_installer.php' script in the Quest KACE System Management Appliance 8.0.318 is accessible by anonymous users and can be abused to execute arbitrary commands on the system.

In Belkin N300 Firmware 1.00.08, the script located at /setting_hidden.asp, which is accessible before and after configuring the device, exhibits multiple remote command injection vulnerabilities. The following parameters in the [form name] form; [list vulnerable parameters], are not properly sanitized after being submitted to the web interface in a POST request. With specially crafted parameters, it is possible to inject a an OS command which will be executed with root privileges, as the web interface, and all processes on the device, run as root.

A remote unauthenticated user can execute commands as root in the Belkin N750 using firmware version 1.10.22 by sending a crafted HTTP request to proxy.cgi.

Multiple vulnerabilities in the web-based management interface of Cisco HyperFlex HX could allow an unauthenticated, remote attacker to perform command injection attacks against an affected device. For more information about these vulnerabilities, see the Details section of this advisory.

Multiple vulnerabilities in the web UI of Cisco Smart Software Manager Satellite could allow an unauthenticated, remote attacker to execute arbitrary commands on the underlying operating system. For more information about these vulnerabilities, see the Details section of this advisory.

TOTOLink N600R V5.3c.7159_B20190425 was discovered to contain a command injection vulnerability via the webwlanidx parameter in /setting/setWebWlanIdx.

The ASUSTOR ADM 3.1.0.RFQ3 NAS portal suffers from an unauthenticated remote code execution vulnerability in the portal/apis/aggrecate_js.cgi file by embedding OS commands in the 'script' parameter.

A command injection vulnerability in the component /SetTriggerLEDBlink/Blink of D-Link DIR882 DIR882A1_FW130B06 allows attackers to escalate privileges to root via a crafted payload.

It is found that there is a command injection vulnerability in the setWiFiWpsStart interface in TOTOlink A7100RU (v7.4cu.2313_b20191024) router, which allows an attacker to execute arbitrary commands through a carefully constructed payload.

TOTOLink N600R V5.3c.7159_B20190425 was discovered to contain a command injection vulnerability via the filename parameter in /setting/setUpgradeFW.

TOTOLink N600R V5.3c.7159_B20190425 was discovered to contain a command injection vulnerability via the langtype parameter in /setting/setLanguageCfg.

TOTOLink N600R V5.3c.7159_B20190425 was discovered to contain a command injection vulnerability via the devicename parameter in /setting/setDeviceName.

Unify OpenStage / OpenScape Desk Phone IP before V3 R3.11.0 SIP has an OS command injection vulnerability in the web based management interface

Tenda TX9 Pro 22.03.02.10 devices allow OS command injection via set_route (called by doSystemCmd_route).

An issue was discovered on Fujitsu ETERNUS CentricStor CS8000 (Control Center) devices before 8.1A SP02 P04. The vulnerability resides in the requestTempFile function in hw_view.php. An attacker is able to influence the unitName POST parameter and inject special characters such as semicolons, backticks, or command-substitution sequences in order to force the application to execute arbitrary commands.

It is found that there is a command injection vulnerability in the setL2tpServerCfg interface in TOTOlink A7100RU (v7.4cu.2313_b20191024) router, which allows an attacker to execute arbitrary commands through a carefully constructed payload.

TOTOLink N600R V5.3c.7159_B20190425 was discovered to contain a command injection vulnerability via the filename parameter in /setting/setUploadSetting.

TOTOLink N600R V5.3c.7159_B20190425 was discovered to contain a command injection vulnerability via the ipdoamin parameter in /setting/setDiagnosisCfg.

D-Link DIR-823-Pro v1.0.2 was discovered to contain a command injection vulnerability in the function SetNTPserverSeting. This vulnerability allows attackers to execute arbitrary commands via the system_time_timezone parameter.

It is found that there is a command injection vulnerability in the setOpenVpnCfg interface in TOTOlink A7100RU (v7.4cu.2313_b20191024) router, which allows an attacker to execute arbitrary commands through a carefully constructed payload.

TOTOLink N600R V5.3c.7159_B20190425 was discovered to contain a command injection vulnerability via the devicemac parameter in /setting/setDeviceName.

An unvalidated REST API in the AppFormix Agent of Juniper Networks AppFormix allows an unauthenticated remote attacker to execute commands as root on the host running the AppFormix Agent, when certain preconditions are performed by the attacker, thus granting the attacker full control over the environment. This issue affects: Juniper Networks AppFormix 3 versions prior to 3.1.22, 3.2.14, 3.3.0.

The web console of FUJITSU Network IPCOM series (IPCOM EX2 IN(3200, 3500), IPCOM EX2 LB(1100, 3200, 3500), IPCOM EX2 SC(1100, 3200, 3500), IPCOM EX2 NW(1100, 3200, 3500), IPCOM EX2 DC, IPCOM EX2 DC, IPCOM EX IN(2300, 2500, 2700), IPCOM EX LB(1100, 1300, 2300, 2500, 2700), IPCOM EX SC(1100, 1300, 2300, 2500, 2700), and IPCOM EX NW(1100, 1300, 2300, 2500, 2700)) allows a remote attacker to execute an arbitrary OS command via unspecified vectors.

Quest DR Series Disk Backup software version before 4.0.3.1 allows command injection (issue 1 of 46).

Exposed Erlang Cookie could lead to Remote Command Execution (RCE) attack. Communication between Erlang nodes is done by exchanging a shared secret (aka "magic cookie"). There are cases where the magic cookie is included in the content of the logs. An attacker can use the cookie to attach to an Erlang node and run OS level commands on the system running the Erlang node. Affects version: 6.5.1. Fix version: 6.6.0.

TOTOLink N600R V5.3c.7159_B20190425 was discovered to contain a command injection vulnerability via the hosttime function in /setting/NTPSyncWithHost.

resi-calltrace in RESI Gemini-Net 4.2 is affected by OS Command Injection. It does not properly check the parameters sent as input before they are processed on the server. Due to the lack of validation of user input, an unauthenticated attacker can bypass the syntax intended by the software (e.g., concatenate `&|;\r\ commands) and inject arbitrary system commands with the privileges of the application user.

It is found that there is a command injection vulnerability in the setopenvpnclientcfg interface in TOTOlink A7100RU (v7.4cu.2313_b20191024) router, which allows attackers to execute arbitrary commands through a carefully constructed payload

GIG Technology NV JumpScale Portal 7 version before commit 15443122ed2b1cbfd7bdefc048bf106f075becdb contains a CWE-78: Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability in method: notifySpaceModification; that can result in Improper validation of parameters results in command execution. This attack appear to be exploitable via Network connectivity, required minimal auth privileges (everyone can register an account). This vulnerability appears to have been fixed in After commit 15443122ed2b1cbfd7bdefc048bf106f075becdb.

It is found that there is a command injection vulnerability in the setWiFiAdvancedCfg interface in TOTOlink A7100RU (v7.4cu.2313_b20191024) router, which allows an attacker to execute arbitrary commands through a carefully constructed payload.

An issue in adm.cgi of WAVLINK AERIAL X 1200M M79X3.V5030.180719 allows attackers to execute arbitrary commands via a crafted POST request.

Security Onion Solutions Squert version 1.3.0 through 1.6.7 contains a CWE-78: Improper Neutralization of Special Elements used in an OS Command (OS Command Injection) vulnerability in .inc/callback.php that can result in execution of OS Commands. This attack appear to be exploitable via Web request to .inc/callback.php with the payload in the data or obj parameters, used in autocat(). This vulnerability appears to have been fixed in 1.7.0.

Security Onion Solutions Squert version 1.0.1 through 1.6.7 contains a CWE-78: Improper Neutralization of Special Elements used in an OS Command (OS Command Injection) vulnerability in .inc/callback.php that can result in execution of OS Commands. This attack appear to be exploitable via Web request to .inc/callback.php with the payload in the txdata parameter, used in tx()/transcript(), or the catdata parameter, used in cat(). This vulnerability appears to have been fixed in 1.7.0.

The Crestron AM-100 firmware 1.6.0.2, Crestron AM-101 firmware 2.7.0.1, Barco wePresent WiPG-1000P firmware 2.3.0.10, Barco wePresent WiPG-1600W before firmware 2.4.1.19, Extron ShareLink 200/250 firmware 2.0.3.4, Teq AV IT WIPS710 firmware 1.1.0.7, SHARP PN-L703WA firmware 1.4.2.3, Optoma WPS-Pro firmware 1.0.0.5, Blackbox HD WPS firmware 1.0.0.5, InFocus LiteShow3 firmware 1.0.16, and InFocus LiteShow4 2.0.0.7 are vulnerable to command injection via the file_transfer.cgi HTTP endpoint. A remote, unauthenticated attacker can use this vulnerability to execute operating system commands as root.

ELTEX NTP-RG-1402G 1v10 3.25.3.32 devices allow OS command injection via the TRACE field of the resource ping.cmd. The NTP-2 device is also affected.

Multiple ZyXEL network-attached storage (NAS) devices running firmware version 5.21 contain a pre-authentication command injection vulnerability, which may allow a remote, unauthenticated attacker to execute arbitrary code on a vulnerable device. ZyXEL NAS devices achieve authentication by using the weblogin.cgi CGI executable. This program fails to properly sanitize the username parameter that is passed to it. If the username parameter contains certain characters, it can allow command injection with the privileges of the web server that runs on the ZyXEL device. Although the web server does not run as the root user, ZyXEL devices include a setuid utility that can be leveraged to run any command with root privileges. As such, it should be assumed that exploitation of this vulnerability can lead to remote code execution with root privileges. By sending a specially-crafted HTTP POST or GET request to a vulnerable ZyXEL device, a remote, unauthenticated attacker may be able to execute arbitrary code on the device. This may happen by directly connecting to a device if it is directly exposed to an attacker. However, there are ways to trigger such crafted requests even if an attacker does not have direct connectivity to a vulnerable devices. For example, simply visiting a website can result in the compromise of any ZyXEL device that is reachable from the client system. Affected products include: NAS326 before firmware V5.21(AAZF.7)C0 NAS520 before firmware V5.21(AASZ.3)C0 NAS540 before firmware V5.21(AATB.4)C0 NAS542 before firmware V5.21(ABAG.4)C0 ZyXEL has made firmware updates available for NAS326, NAS520, NAS540, and NAS542 devices. Affected models that are end-of-support: NSA210, NSA220, NSA220+, NSA221, NSA310, NSA310S, NSA320, NSA320S, NSA325 and NSA325v2

ELTEX NTP-RG-1402G 1v10 3.25.3.32 devices allow OS command injection via the PING field of the resource ping.cmd. The NTP-2 device is also affected.

An issue was found on TRENDnet TEW-831DR 1.0 601.130.1.1356 devices. An OS injection vulnerability exists within the web interface, allowing an attacker with valid credentials to execute arbitrary shell commands.

TimeTools SC7105 1.0.007, SC9205 1.0.007, SC9705 1.0.007, SR7110 1.0.007, SR9210 1.0.007, SR9750 1.0.007, SR9850 1.0.007, T100 1.0.003, T300 1.0.003, and T550 1.0.003 devices allow remote attackers to execute arbitrary OS commands via shell metacharacters in the t3.cgi srmodel or srtime parameter.

Tenda M3 1.10 V1.0.0.12(4856) was discovered to contain a command injection vulnerability via the component /goform/exeCommand.