TOTOLINK X18 V9.1.0cu.2024_B20220329 was discovered to contain a command injection vulnerability via the pid parameter in the disconnectVPN function.

A vulnerability, which was classified as critical, was found in Tenda AC7 1200M 15.03.06.44. Affected is the function TendaTelnet of the file /goform/telnet. The manipulation of the argument lan_ip leads to os command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used.

A vulnerability has been found in ADSLR NBR1005GPEV2 250814-r037c. This vulnerability affects the function ap_macfilter_del of the file /send_order.cgi. The manipulation of the argument mac leads to command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was detected in ADSLR B-QE2W401 250814-r037c. Affected by this issue is the function parameterdel_swifimac of the file /send_order.cgi. Performing manipulation of the argument del_swifimac results in command injection. The attack is possible to be carried out remotely. The exploit is now public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability has been found in Sangfor Operation and Maintenance Management System up to 3.0.8. This vulnerability affects the function uploadCN of the file VersionController.java. The manipulation of the argument filename leads to os command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A command injection vulnerability in the component /api/cron/settings/setJob/ of OPNsense Community Edition before 23.7 and Business Edition before 23.4.2 allows attackers to execute arbitrary system commands.

A security flaw has been discovered in Edimax BR-6208AC 1.02/1.03. Affected by this vulnerability is the function formRoute of the file /gogorm/formRoute of the component Web-based Configuration Interface. The manipulation of the argument strIp/strMask/strGateway results in command injection. The attack can be executed remotely. The exploit has been released to the public and may be used for attacks. Edimax confirms this issue: "The product mentioned, EDIMAX BR-6208AC V2, has reached its End of Life (EOL) status. It is no longer supported or maintained by Edimax, and it is no longer available for purchase in the market. Consequently, there will be no further firmware updates or patches for this device. We recommend users upgrade to newer models for better security." This vulnerability only affects products that are no longer supported by the maintainer.

Tenda AC18 v15.03.05.19(6318_)_cn was discovered to contain a command injection vulnerability via the deviceName parameter in the setUsbUnload function.

An issue in COMFAST CF-XR11 v.2.7.2 allows an attacker to execute arbitrary code via the ifname and mac parameters in the sub_410074 function at bin/webmgnt.

TOTOLINK X18 V9.1.0cu.2024_B20220329 was discovered to contain a command injection vulnerability via the command parameter in the setTracerouteCfg function.

huedawn-tesseract 0.3.3 and dawnsparks-node-tesseract 0.4.0 to 0.4.1 was discovered to contain a remote code execution (RCE) vulnerability via the child_process function.

All versions of iSTAR Ultra prior to version 6.8.9.CU01 are vulnerable to a command injection that could allow an unauthenticated user root access to the system.

TOTOLINK X18 V9.1.0cu.2024_B20220329 was discovered to contain a command injection vulnerability via the FileName parameter in the UploadFirmwareFile function.

inventory in Atos Unify OpenScape 4000 Platform and OpenScape 4000 Manager Platform 10 R1 before 10 R1.34.4 allows an unauthenticated attacker to run arbitrary commands on the platform operating system and achieve administrative access, aka OSFOURK-23552.

The affected product is vulnerable to two instances of command injection, which may allow an attacker to remotely execute arbitrary code.

inventory in Atos Unify OpenScape 4000 Platform and OpenScape 4000 Manager Platform 10 R1 before 10 R1.34.4 allows an unauthenticated attacker to run arbitrary commands on the platform operating system and achieve administrative access, aka OSFOURK-23543.

An issue in COMFAST CF-XR11 v.2.7.2 allows an attacker to execute arbitrary code via the protal_delete_picname parameter in the sub_41171C function at bin/webmgnt.

TOTOLINK X18 V9.1.0cu.2024_B20220329 was discovered to contain multiple command injection vulnerabilities via the rtLogEnabled and rtLogServer parameters in the setSyslogCfg function.

A vulnerability was identified in Shiguangwu sgwbox N3 2.0.25. This impacts an unknown function of the file /usr/sbin/http_eshell_server of the component NETREBOOT Interface. Such manipulation leads to command injection. The attack can be launched remotely. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way.

TOTOLINK X18 V9.1.0cu.2024_B20220329 was discovered to contain a command injection vulnerability via the ip parameter in the setDiagnosisCfg function.

A vulnerability has been identified in CP-8031 MASTER MODULE (All versions < CPCI85 V05), CP-8050 MASTER MODULE (All versions < CPCI85 V05). Affected devices are vulnerable to command injection via the web server port 443/tcp, if the parameter “Remote Operation” is enabled. The parameter is disabled by default. The vulnerability could allow an unauthenticated remote attacker to perform arbitrary code execution on the device.

A remote command execution (RCE) vulnerability in NextGen Mirth Connect v4.3.0 allows attackers to execute arbitrary commands on the hosting server.

Osprey Pump Controller version 1.01 contains an unauthenticated command injection vulnerability that could allow system access with www-data permissions.

A vulnerability was detected in D-Link DIR-860LB1 and DIR-868LB1 203b01/203b03. Affected is an unknown function of the component DHCP Daemon. The manipulation of the argument Hostname results in command injection. It is possible to launch the attack remotely. The exploit is now public and may be used.

SpotCam Co., Ltd. SpotCam Sense’s hidden Telnet function has a vulnerability of OS command injection. An remote unauthenticated attacker can exploit this vulnerability to execute command injection attack to perform arbitrary system commands or disrupt service.

Heights Telecom ERO1xS-Pro Dual-Band FW version BZ_ERO1XP.025.

Command injection vulnerability in ELECOM and LOGITEC wireless LAN routers allows a remote unauthenticated attacker to execute an arbitrary command by sending a specially crafted request to a certain port of the web management page. Affected products and versions are as follows: WRC-1167GHBK3-A v1.24 and earlier, WRC-F1167ACF2 all versions, WRC-600GHBK-A all versions, WRC-733FEBK2-A all versions, WRC-1467GHBK-A all versions, WRC-1900GHBK-A all versions, and LAN-W301NR all versions.

GreenPacket OH736's WR-1200 Indoor Unit, OT-235 with firmware versions M-IDU-1.6.0.3_V1.1 and MH-46360-2.0.3-R5-GP respectively are vulnerable to remote command injection. Commands are executed using pre-login execution and executed with root privileges allowing complete takeover.

TOTOlink A7100RU V7.4cu.2313_B20191024 was discovered to contain a command injection vulnerability via the upBw parameter at /setting/setWanIeCfg.

broccoli-compass v0.2.4 was discovered to contain a remote code execution (RCE) vulnerability via the child_process function.

TOTOlink A7100RU V7.4cu.2313_B20191024 was discovered to contain a command injection vulnerability via the pppoeAcName parameter at /setting/setWanIeCfg.

rails-routes-to-json v1.0.0 was discovered to contain a remote code execution (RCE) vulnerability via the child_process function.

A security flaw has been discovered in Totolink A8000RU 7.1cu.643_b20200521. Affected is the function setAppFilterCfg of the file /cgi-bin/cstecgi.cgi. The manipulation of the argument enable results in os command injection. The attack may be launched remotely. The exploit has been released to the public and may be used for attacks.

TOTOlink A7100RU V7.4cu.2313_B20191024 was discovered to contain a command injection vulnerability via the enabled parameter at /setting/setWanIeCfg.

TOTOlink A7100RU V7.4cu.2313_B20191024 was discovered to contain a command injection vulnerability via the wanStrategy parameter at /setting/setWanIeCfg.

versionn, software for changing version information across multiple files, has a command injection vulnerability in all versions prior to version 1.1.0. This issue is patched in version 1.1.0.

A vulnerability, which was classified as critical, was found in IonicaBizau node-gry up to 5.x. This affects an unknown part. The manipulation leads to command injection. Upgrading to version 6.0.0 is able to address this issue. The patch is named 5108446c1e23960d65e8b973f1d9486f9f9dbd6c. It is recommended to upgrade the affected component. The associated identifier of this vulnerability is VDB-218019.

TOTOlink A7100RU(V7.4cu.2313_B20191024) was discovered to contain a command injection vulnerability via the city parameter at setting/delStaticDhcpRules.

TOTOLINK CA300-PoE V6.2c.884 was discovered to contain a command injection vulnerability via the admuser parameter in the setPasswordCfg function.

TOTOLINK CA300-PoE V6.2c.884 was discovered to contain a command injection vulnerability via the NetDiagPingTimeOut parameter in the setNetworkDiag function.

TOTOLINK CA300-PoE V6.2c.884 was discovered to contain a command injection vulnerability via the NetDiagTracertHop parameter in the setNetworkDiag function.

A command injection vulnerability in the ip parameter in the function recvSlaveCloudCheckStatus of TOTOLINK T8 V4.1.5cu allows attackers to execute arbitrary commands via a crafted MQTT packet.

TOTOLINK CA300-PoE V6.2c.884 was discovered to contain a command injection vulnerability via the plugin_version parameter in the setUnloadUserData function.

A command injection vulnerability in the serverIp parameter in the function meshSlaveDlfw of TOTOLINK T8 V4.1.5cu allows attackers to execute arbitrary commands via a crafted MQTT packet.

TOTOLINK CA300-PoE V6.2c.884 was discovered to contain a command injection vulnerability via the NetDiagPingSize parameter in the setNetworkDiag function.

Improper Input Validation vulnerability in Honeywell PM43 on 32 bit, ARM (Printer web page modules) allows Command Injection.This issue affects PM43 versions prior to P10.19.050004. Update to the latest available firmware version of the respective printers to version MR19.5 (e.g. P10.19.050006).

A command injection vulnerability in the serverIp parameter in the function updateWifiInfo of TOTOLINK T8 V4.1.5cu allows attackers to execute arbitrary commands via a crafted MQTT packet.

TOTOLINK T8 V4.1.5cu was discovered to contain a command injection vulnerability via the slaveIpList parameter in the function setUpgradeFW.

TOTOLINK CA300-PoE V6.2c.884 was discovered to contain a command injection vulnerability via the admpass parameter in the setPasswordCfg function.

A command injection vulnerability in the DHCP Client function of all UniFi Access Points and Switches, excluding the Switch Flex Mini, could allow a Remote Code Execution (RCE). Affected Products: All UniFi Access Points (Version 6.5.53 and earlier) All UniFi Switches (Version 6.5.32 and earlier) -USW Flex Mini excluded. Mitigation: Update UniFi Access Points to Version 6.5.62 or later. Update UniFi Switches to Version 6.5.59 or later.