An issue was discovered in the Linux kernel before 5.6.5. There is a use-after-free in block/bfq-iosched.c related to bfq_idle_slice_timer_body.

A flaw out of bounds memory write in the Linux kernel UDF file system functionality was found in the way user triggers some file operation which triggers udf_write_fi(). A local user could use this flaw to crash the system or potentially

A use-after-free flaw was found in the Linux kernel's netfilter in the way a user triggers the nft_pipapo_remove function with the element, without a NFT_SET_EXT_KEY_END. This issue could allow a local user to crash the system or potentially escalate their privileges on the system.

A use-after-free flaw was found in the Linux kernel’s io_uring subsystem in the way a user sets up a ring with IORING_SETUP_IOPOLL with more than one task completing submissions on this ring. This flaw allows a local user to crash or escalate their privileges on the system.

drivers/media/usb/dvb-usb/cxusb.c in the Linux kernel 4.9.x and 4.10.x before 4.10.12 interacts incorrectly with the CONFIG_VMAP_STACK option, which allows local users to cause a denial of service (system crash) or possibly have unspecified other impact by leveraging use of more than one virtual page for a DMA scatterlist.

An issue was found in Linux kernel before 5.5.4. The mwifiex_cmd_append_vsie_tlv() function in drivers/net/wireless/marvell/mwifiex/scan.c allows local users to gain privileges or cause a denial of service because of an incorrect memcpy and buffer overflow, aka CID-b70261a288ea.

In the Linux kernel, the following vulnerability has been resolved: usb: xhci: Don't skip on Stopped - Length Invalid Up until commit d56b0b2ab142 ("usb: xhci: ensure skipped isoc TDs are returned when isoc ring is stopped") in v6.11, the driver didn't skip missed isochronous TDs when handling Stoppend and Stopped - Length Invalid events. Instead, it erroneously cleared the skip flag, which would cause the ring to get stuck, as future events won't match the missed TD which is never removed from the queue until it's cancelled. This buggy logic seems to have been in place substantially unchanged since the 3.x series over 10 years ago, which probably speaks first and foremost about relative rarity of this case in normal usage, but by the spec I see no reason why it shouldn't be possible. After d56b0b2ab142, TDs are immediately skipped when handling those Stopped events. This poses a potential problem in case of Stopped - Length Invalid, which occurs either on completed TDs (likely already given back) or Link and No-Op TRBs. Such event won't be recognized as matching any TD (unless it's the rare Link TRB inside a TD) and will result in skipping all pending TDs, giving them back possibly before they are done, risking isoc data loss and maybe UAF by HW. As a compromise, don't skip and don't clear the skip flag on this kind of event. Then the next event will skip missed TDs. A downside of not handling Stopped - Length Invalid on a Link inside a TD is that if the TD is cancelled, its actual length will not be updated to account for TRBs (silently) completed before the TD was stopped. I had no luck producing this sequence of completion events so there is no compelling demonstration of any resulting disaster. It may be a very rare, obscure condition. The sole motivation for this patch is that if such unlikely event does occur, I'd rather risk reporting a cancelled partially done isoc frame as empty than gamble with UAF. This will be fixed more properly by looking at Stopped event's TRB pointer when making skipping decisions, but such rework is unlikely to be backported to v6.12, which will stay around for a few years.

A use-after-free flaw was found in the Linux kernel’s Atheros wireless adapter driver in the way a user forces the ath9k_htc_wait_for_target function to fail with some input messages. This flaw allows a local user to crash or potentially escalate their privileges on the system.

usb_sg_cancel in drivers/usb/core/message.c in the Linux kernel before 5.6.8 has a use-after-free because a transfer occurs without a reference, aka CID-056ad39ee925.

The root cause of this vulnerability is that the ioctl$DRM_IOCTL_MODE_DESTROY_DUMB can decrease refcount of *drm_vgem_gem_object *(created in *vgem_gem_dumb_create*) concurrently, and *vgem_gem_dumb_create *will access the freed drm_vgem_gem_object.

An array overflow was discovered in mt76_add_fragment in drivers/net/wireless/mediatek/mt76/dma.c in the Linux kernel before 5.5.10, aka CID-b102f0c522cf. An oversized packet with too many rx fragments can corrupt memory of adjacent pages.

A use-after-free exists in the Linux Kernel in tc_new_tfilter that could allow a local attacker to gain privilege escalation. The exploit requires unprivileged user namespaces. We recommend upgrading past commit 04c2a47ffb13c29778e2a14e414ad4cb5a5db4b5

Linux Kernel could allow a local attacker to execute arbitrary code on the system, caused by a concurrency use-after-free flaw in the bad_flp_intr function. By executing a specially-crafted program, an attacker could exploit this vulnerability to execute arbitrary code or cause a denial of service condition on the system.

qfq_change_class in net/sched/sch_qfq.c in the Linux kernel before 6.2.13 allows an out-of-bounds write because lmax can exceed QFQ_MIN_LMAX.

snd_ctl_elem_add in sound/core/control.c in the Linux kernel through 5.6.3 has a count=info->owner line, which later affects a private_size*count multiplication for unspecified "interesting side effects." NOTE: kernel engineers dispute this finding, because it could be relevant only if new callers were added that were unfamiliar with the misuse of the info->owner field to represent data unrelated to the "owner" concept. The existing callers, SNDRV_CTL_IOCTL_ELEM_ADD and SNDRV_CTL_IOCTL_ELEM_REPLACE, have been designed to misuse the info->owner field in a safe way

A flaw was found in unrestricted eBPF usage by the BPF_BTF_LOAD, leading to a possible out-of-bounds memory write in the Linux kernel’s BPF subsystem due to the way a user loads BTF. This flaw allows a local user to crash or escalate their privileges on the system.

In the Linux kernel, the following vulnerability has been resolved: iommu/mediatek: Always enable the clk on resume In mtk_iommu_runtime_resume always enable the clk, even if m4u_dom is null. Otherwise the 'suspend' cb might disable the clk which is already disabled causing the warning: [ 1.586104] infra_m4u already disabled [ 1.586133] WARNING: CPU: 0 PID: 121 at drivers/clk/clk.c:952 clk_core_disable+0xb0/0xb8 [ 1.594391] mtk-iommu 10205000.iommu: bound 18001000.larb (ops mtk_smi_larb_component_ops) [ 1.598108] Modules linked in: [ 1.598114] CPU: 0 PID: 121 Comm: kworker/0:2 Not tainted 5.12.0-rc5 #69 [ 1.609246] mtk-iommu 10205000.iommu: bound 14027000.larb (ops mtk_smi_larb_component_ops) [ 1.617487] Hardware name: Google Elm (DT) [ 1.617491] Workqueue: pm pm_runtime_work [ 1.620545] mtk-iommu 10205000.iommu: bound 19001000.larb (ops mtk_smi_larb_component_ops) [ 1.627229] pstate: 60000085 (nZCv daIf -PAN -UAO -TCO BTYPE=--) [ 1.659297] pc : clk_core_disable+0xb0/0xb8 [ 1.663475] lr : clk_core_disable+0xb0/0xb8 [ 1.667652] sp : ffff800011b9bbe0 [ 1.670959] x29: ffff800011b9bbe0 x28: 0000000000000000 [ 1.676267] x27: ffff800011448000 x26: ffff8000100cfd98 [ 1.681574] x25: ffff800011b9bd48 x24: 0000000000000000 [ 1.686882] x23: 0000000000000000 x22: ffff8000106fad90 [ 1.692189] x21: 000000000000000a x20: ffff0000c0048500 [ 1.697496] x19: ffff0000c0048500 x18: ffffffffffffffff [ 1.702804] x17: 0000000000000000 x16: 0000000000000000 [ 1.708112] x15: ffff800011460300 x14: fffffffffffe0000 [ 1.713420] x13: ffff8000114602d8 x12: 0720072007200720 [ 1.718727] x11: 0720072007200720 x10: 0720072007200720 [ 1.724035] x9 : ffff800011b9bbe0 x8 : ffff800011b9bbe0 [ 1.729342] x7 : 0000000000000009 x6 : ffff8000114b8328 [ 1.734649] x5 : 0000000000000000 x4 : 0000000000000000 [ 1.739956] x3 : 00000000ffffffff x2 : ffff800011460298 [ 1.745263] x1 : 1af1d7de276f4500 x0 : 0000000000000000 [ 1.750572] Call trace: [ 1.753010] clk_core_disable+0xb0/0xb8 [ 1.756840] clk_core_disable_lock+0x24/0x40 [ 1.761105] clk_disable+0x20/0x30 [ 1.764501] mtk_iommu_runtime_suspend+0x88/0xa8 [ 1.769114] pm_generic_runtime_suspend+0x2c/0x48 [ 1.773815] __rpm_callback+0xe0/0x178 [ 1.777559] rpm_callback+0x24/0x88 [ 1.781041] rpm_suspend+0xdc/0x470 [ 1.784523] rpm_idle+0x12c/0x170 [ 1.787831] pm_runtime_work+0xa8/0xc0 [ 1.791573] process_one_work+0x1e8/0x360 [ 1.795580] worker_thread+0x44/0x478 [ 1.799237] kthread+0x150/0x158 [ 1.802460] ret_from_fork+0x10/0x30 [ 1.806034] ---[ end trace 82402920ef64573b ]--- [ 1.810728] ------------[ cut here ]------------ In addition, we now don't need to enable the clock from the function mtk_iommu_hw_init since it is already enabled by the resume.

A random memory access flaw was found in the Linux kernel's GPU i915 kernel driver functionality in the way a user may run malicious code on the GPU. This flaw allows a local user to crash the system or escalate their privileges on the system.

In the Linux kernel, the following vulnerability has been resolved: net: bridge: fix vlan tunnel dst refcnt when egressing The egress tunnel code uses dst_clone() and directly sets the result which is wrong because the entry might have 0 refcnt or be already deleted, causing number of problems. It also triggers the WARN_ON() in dst_hold()[1] when a refcnt couldn't be taken. Fix it by using dst_hold_safe() and checking if a reference was actually taken before setting the dst. [1] dmesg WARN_ON log and following refcnt errors WARNING: CPU: 5 PID: 38 at include/net/dst.h:230 br_handle_egress_vlan_tunnel+0x10b/0x134 [bridge] Modules linked in: 8021q garp mrp bridge stp llc bonding ipv6 virtio_net CPU: 5 PID: 38 Comm: ksoftirqd/5 Kdump: loaded Tainted: G W 5.13.0-rc3+ #360 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-1.fc33 04/01/2014 RIP: 0010:br_handle_egress_vlan_tunnel+0x10b/0x134 [bridge] Code: e8 85 bc 01 e1 45 84 f6 74 90 45 31 f6 85 db 48 c7 c7 a0 02 19 a0 41 0f 94 c6 31 c9 31 d2 44 89 f6 e8 64 bc 01 e1 85 db 75 02 <0f> 0b 31 c9 31 d2 44 89 f6 48 c7 c7 70 02 19 a0 e8 4b bc 01 e1 49 RSP: 0018:ffff8881003d39e8 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffffffffa01902a0 RBP: ffff8881040c6700 R08: 0000000000000000 R09: 0000000000000001 R10: 2ce93d0054fe0d00 R11: 54fe0d00000e0000 R12: ffff888109515000 R13: 0000000000000000 R14: 0000000000000001 R15: 0000000000000401 FS: 0000000000000000(0000) GS:ffff88822bf40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f42ba70f030 CR3: 0000000109926000 CR4: 00000000000006e0 Call Trace: br_handle_vlan+0xbc/0xca [bridge] __br_forward+0x23/0x164 [bridge] deliver_clone+0x41/0x48 [bridge] br_handle_frame_finish+0x36f/0x3aa [bridge] ? skb_dst+0x2e/0x38 [bridge] ? br_handle_ingress_vlan_tunnel+0x3e/0x1c8 [bridge] ? br_handle_frame_finish+0x3aa/0x3aa [bridge] br_handle_frame+0x2c3/0x377 [bridge] ? __skb_pull+0x33/0x51 ? vlan_do_receive+0x4f/0x36a ? br_handle_frame_finish+0x3aa/0x3aa [bridge] __netif_receive_skb_core+0x539/0x7c6 ? __list_del_entry_valid+0x16e/0x1c2 __netif_receive_skb_list_core+0x6d/0xd6 netif_receive_skb_list_internal+0x1d9/0x1fa gro_normal_list+0x22/0x3e dev_gro_receive+0x55b/0x600 ? detach_buf_split+0x58/0x140 napi_gro_receive+0x94/0x12e virtnet_poll+0x15d/0x315 [virtio_net] __napi_poll+0x2c/0x1c9 net_rx_action+0xe6/0x1fb __do_softirq+0x115/0x2d8 run_ksoftirqd+0x18/0x20 smpboot_thread_fn+0x183/0x19c ? smpboot_unregister_percpu_thread+0x66/0x66 kthread+0x10a/0x10f ? kthread_mod_delayed_work+0xb6/0xb6 ret_from_fork+0x22/0x30 ---[ end trace 49f61b07f775fd2b ]--- dst_release: dst:00000000c02d677a refcnt:-1 dst_release underflow

In the Linux kernel, the following vulnerability has been resolved: blk-cgroup: fix UAF by grabbing blkcg lock before destroying blkg pd KASAN reports a use-after-free report when doing fuzz test: [693354.104835] ================================================================== [693354.105094] BUG: KASAN: use-after-free in bfq_io_set_weight_legacy+0xd3/0x160 [693354.105336] Read of size 4 at addr ffff888be0a35664 by task sh/1453338 [693354.105607] CPU: 41 PID: 1453338 Comm: sh Kdump: loaded Not tainted 4.18.0-147 [693354.105610] Hardware name: Huawei 2288H V5/BC11SPSCB0, BIOS 0.81 07/02/2018 [693354.105612] Call Trace: [693354.105621] dump_stack+0xf1/0x19b [693354.105626] ? show_regs_print_info+0x5/0x5 [693354.105634] ? printk+0x9c/0xc3 [693354.105638] ? cpumask_weight+0x1f/0x1f [693354.105648] print_address_description+0x70/0x360 [693354.105654] kasan_report+0x1b2/0x330 [693354.105659] ? bfq_io_set_weight_legacy+0xd3/0x160 [693354.105665] ? bfq_io_set_weight_legacy+0xd3/0x160 [693354.105670] bfq_io_set_weight_legacy+0xd3/0x160 [693354.105675] ? bfq_cpd_init+0x20/0x20 [693354.105683] cgroup_file_write+0x3aa/0x510 [693354.105693] ? ___slab_alloc+0x507/0x540 [693354.105698] ? cgroup_file_poll+0x60/0x60 [693354.105702] ? 0xffffffff89600000 [693354.105708] ? usercopy_abort+0x90/0x90 [693354.105716] ? mutex_lock+0xef/0x180 [693354.105726] kernfs_fop_write+0x1ab/0x280 [693354.105732] ? cgroup_file_poll+0x60/0x60 [693354.105738] vfs_write+0xe7/0x230 [693354.105744] ksys_write+0xb0/0x140 [693354.105749] ? __ia32_sys_read+0x50/0x50 [693354.105760] do_syscall_64+0x112/0x370 [693354.105766] ? syscall_return_slowpath+0x260/0x260 [693354.105772] ? do_page_fault+0x9b/0x270 [693354.105779] ? prepare_exit_to_usermode+0xf9/0x1a0 [693354.105784] ? enter_from_user_mode+0x30/0x30 [693354.105793] entry_SYSCALL_64_after_hwframe+0x65/0xca [693354.105875] Allocated by task 1453337: [693354.106001] kasan_kmalloc+0xa0/0xd0 [693354.106006] kmem_cache_alloc_node_trace+0x108/0x220 [693354.106010] bfq_pd_alloc+0x96/0x120 [693354.106015] blkcg_activate_policy+0x1b7/0x2b0 [693354.106020] bfq_create_group_hierarchy+0x1e/0x80 [693354.106026] bfq_init_queue+0x678/0x8c0 [693354.106031] blk_mq_init_sched+0x1f8/0x460 [693354.106037] elevator_switch_mq+0xe1/0x240 [693354.106041] elevator_switch+0x25/0x40 [693354.106045] elv_iosched_store+0x1a1/0x230 [693354.106049] queue_attr_store+0x78/0xb0 [693354.106053] kernfs_fop_write+0x1ab/0x280 [693354.106056] vfs_write+0xe7/0x230 [693354.106060] ksys_write+0xb0/0x140 [693354.106064] do_syscall_64+0x112/0x370 [693354.106069] entry_SYSCALL_64_after_hwframe+0x65/0xca [693354.106114] Freed by task 1453336: [693354.106225] __kasan_slab_free+0x130/0x180 [693354.106229] kfree+0x90/0x1b0 [693354.106233] blkcg_deactivate_policy+0x12c/0x220 [693354.106238] bfq_exit_queue+0xf5/0x110 [693354.106241] blk_mq_exit_sched+0x104/0x130 [693354.106245] __elevator_exit+0x45/0x60 [693354.106249] elevator_switch_mq+0xd6/0x240 [693354.106253] elevator_switch+0x25/0x40 [693354.106257] elv_iosched_store+0x1a1/0x230 [693354.106261] queue_attr_store+0x78/0xb0 [693354.106264] kernfs_fop_write+0x1ab/0x280 [693354.106268] vfs_write+0xe7/0x230 [693354.106271] ksys_write+0xb0/0x140 [693354.106275] do_syscall_64+0x112/0x370 [693354.106280] entry_SYSCALL_64_after_hwframe+0x65/0xca [693354.106329] The buggy address belongs to the object at ffff888be0a35580 which belongs to the cache kmalloc-1k of size 1024 [693354.106736] The buggy address is located 228 bytes inside of 1024-byte region [ffff888be0a35580, ffff888be0a35980) [693354.107114] The buggy address belongs to the page: [693354.107273] page:ffffea002f828c00 count:1 mapcount:0 mapping:ffff888107c17080 index:0x0 compound_mapcount: 0 [693354.107606] flags: 0x17ffffc0008100(slab|head) [693354.107760] raw: 0017ffffc0008100 ffffea002fcbc808 ffffea0030bd3a08 ffff888107c17080 [693354.108020] r ---truncated---

A vulnerability was found in the Linux kernel’s cgroup_release_agent_write in the kernel/cgroup/cgroup-v1.c function. This flaw, under certain circumstances, allows the use of the cgroups v1 release_agent feature to escalate privileges and bypass the namespace isolation unexpectedly.

Linux Kernel nftables Use-After-Free Local Privilege Escalation Vulnerability; `nft_chain_lookup_byid()` failed to check whether a chain was active and CAP_NET_ADMIN is in any user or network namespace

In the Linux kernel, the following vulnerability has been resolved: powerpc/code-patching: Disable KASAN report during patching via temporary mm Erhard reports the following KASAN hit on Talos II (power9) with kernel 6.13: [ 12.028126] ================================================================== [ 12.028198] BUG: KASAN: user-memory-access in copy_to_kernel_nofault+0x8c/0x1a0 [ 12.028260] Write of size 8 at addr 0000187e458f2000 by task systemd/1 [ 12.028346] CPU: 87 UID: 0 PID: 1 Comm: systemd Tainted: G T 6.13.0-P9-dirty #3 [ 12.028408] Tainted: [T]=RANDSTRUCT [ 12.028446] Hardware name: T2P9D01 REV 1.01 POWER9 0x4e1202 opal:skiboot-bc106a0 PowerNV [ 12.028500] Call Trace: [ 12.028536] [c000000008dbf3b0] [c000000001656a48] dump_stack_lvl+0xbc/0x110 (unreliable) [ 12.028609] [c000000008dbf3f0] [c0000000006e2fc8] print_report+0x6b0/0x708 [ 12.028666] [c000000008dbf4e0] [c0000000006e2454] kasan_report+0x164/0x300 [ 12.028725] [c000000008dbf600] [c0000000006e54d4] kasan_check_range+0x314/0x370 [ 12.028784] [c000000008dbf640] [c0000000006e6310] __kasan_check_write+0x20/0x40 [ 12.028842] [c000000008dbf660] [c000000000578e8c] copy_to_kernel_nofault+0x8c/0x1a0 [ 12.028902] [c000000008dbf6a0] [c0000000000acfe4] __patch_instructions+0x194/0x210 [ 12.028965] [c000000008dbf6e0] [c0000000000ade80] patch_instructions+0x150/0x590 [ 12.029026] [c000000008dbf7c0] [c0000000001159bc] bpf_arch_text_copy+0x6c/0xe0 [ 12.029085] [c000000008dbf800] [c000000000424250] bpf_jit_binary_pack_finalize+0x40/0xc0 [ 12.029147] [c000000008dbf830] [c000000000115dec] bpf_int_jit_compile+0x3bc/0x930 [ 12.029206] [c000000008dbf990] [c000000000423720] bpf_prog_select_runtime+0x1f0/0x280 [ 12.029266] [c000000008dbfa00] [c000000000434b18] bpf_prog_load+0xbb8/0x1370 [ 12.029324] [c000000008dbfb70] [c000000000436ebc] __sys_bpf+0x5ac/0x2e00 [ 12.029379] [c000000008dbfd00] [c00000000043a228] sys_bpf+0x28/0x40 [ 12.029435] [c000000008dbfd20] [c000000000038eb4] system_call_exception+0x334/0x610 [ 12.029497] [c000000008dbfe50] [c00000000000c270] system_call_vectored_common+0xf0/0x280 [ 12.029561] --- interrupt: 3000 at 0x3fff82f5cfa8 [ 12.029608] NIP: 00003fff82f5cfa8 LR: 00003fff82f5cfa8 CTR: 0000000000000000 [ 12.029660] REGS: c000000008dbfe80 TRAP: 3000 Tainted: G T (6.13.0-P9-dirty) [ 12.029735] MSR: 900000000280f032 <SF,HV,VEC,VSX,EE,PR,FP,ME,IR,DR,RI> CR: 42004848 XER: 00000000 [ 12.029855] IRQMASK: 0 GPR00: 0000000000000169 00003fffdcf789a0 00003fff83067100 0000000000000005 GPR04: 00003fffdcf78a98 0000000000000090 0000000000000000 0000000000000008 GPR08: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 GPR12: 0000000000000000 00003fff836ff7e0 c000000000010678 0000000000000000 GPR16: 0000000000000000 0000000000000000 00003fffdcf78f28 00003fffdcf78f90 GPR20: 0000000000000000 0000000000000000 0000000000000000 00003fffdcf78f80 GPR24: 00003fffdcf78f70 00003fffdcf78d10 00003fff835c7239 00003fffdcf78bd8 GPR28: 00003fffdcf78a98 0000000000000000 0000000000000000 000000011f547580 [ 12.030316] NIP [00003fff82f5cfa8] 0x3fff82f5cfa8 [ 12.030361] LR [00003fff82f5cfa8] 0x3fff82f5cfa8 [ 12.030405] --- interrupt: 3000 [ 12.030444] ================================================================== Commit c28c15b6d28a ("powerpc/code-patching: Use temporary mm for Radix MMU") is inspired from x86 but unlike x86 is doesn't disable KASAN reports during patching. This wasn't a problem at the begining because __patch_mem() is not instrumented. Commit 465cabc97b42 ("powerpc/code-patching: introduce patch_instructions()") use copy_to_kernel_nofault() to copy several instructions at once. But when using temporary mm the destination is not regular kernel memory but a kind of kernel-like memory located in user address space. ---truncated---

A flaw was found in the way the "flags" member of the new pipe buffer structure was lacking proper initialization in copy_page_to_iter_pipe and push_pipe functions in the Linux kernel and could thus contain stale values. An unprivileged local user could use this flaw to write to pages in the page cache backed by read only files and as such escalate their privileges on the system.

In the Linux kernel, the following vulnerability has been resolved: jfs: fix array-index-out-of-bounds in jfs_readdir The stbl might contain some invalid values. Added a check to return error code in that case.

In the Linux kernel, the following vulnerability has been resolved: btrfs: fix use-after-free when attempting to join an aborted transaction When we are trying to join the current transaction and if it's aborted, we read its 'aborted' field after unlocking fs_info->trans_lock and without holding any extra reference count on it. This means that a concurrent task that is aborting the transaction may free the transaction before we read its 'aborted' field, leading to a use-after-free. Fix this by reading the 'aborted' field while holding fs_info->trans_lock since any freeing task must first acquire that lock and set fs_info->running_transaction to NULL before freeing the transaction. This was reported by syzbot and Dmitry with the following stack traces from KASAN: ================================================================== BUG: KASAN: slab-use-after-free in join_transaction+0xd9b/0xda0 fs/btrfs/transaction.c:278 Read of size 4 at addr ffff888011839024 by task kworker/u4:9/1128 CPU: 0 UID: 0 PID: 1128 Comm: kworker/u4:9 Not tainted 6.13.0-rc7-syzkaller-00019-gc45323b7560e #0 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 Workqueue: events_unbound btrfs_async_reclaim_data_space Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 [inline] print_report+0x169/0x550 mm/kasan/report.c:489 kasan_report+0x143/0x180 mm/kasan/report.c:602 join_transaction+0xd9b/0xda0 fs/btrfs/transaction.c:278 start_transaction+0xaf8/0x1670 fs/btrfs/transaction.c:697 flush_space+0x448/0xcf0 fs/btrfs/space-info.c:803 btrfs_async_reclaim_data_space+0x159/0x510 fs/btrfs/space-info.c:1321 process_one_work kernel/workqueue.c:3236 [inline] process_scheduled_works+0xa66/0x1840 kernel/workqueue.c:3317 worker_thread+0x870/0xd30 kernel/workqueue.c:3398 kthread+0x2f0/0x390 kernel/kthread.c:389 ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 </TASK> Allocated by task 5315: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x3f/0x80 mm/kasan/common.c:68 poison_kmalloc_redzone mm/kasan/common.c:377 [inline] __kasan_kmalloc+0x98/0xb0 mm/kasan/common.c:394 kasan_kmalloc include/linux/kasan.h:260 [inline] __kmalloc_cache_noprof+0x243/0x390 mm/slub.c:4329 kmalloc_noprof include/linux/slab.h:901 [inline] join_transaction+0x144/0xda0 fs/btrfs/transaction.c:308 start_transaction+0xaf8/0x1670 fs/btrfs/transaction.c:697 btrfs_create_common+0x1b2/0x2e0 fs/btrfs/inode.c:6572 lookup_open fs/namei.c:3649 [inline] open_last_lookups fs/namei.c:3748 [inline] path_openat+0x1c03/0x3590 fs/namei.c:3984 do_filp_open+0x27f/0x4e0 fs/namei.c:4014 do_sys_openat2+0x13e/0x1d0 fs/open.c:1402 do_sys_open fs/open.c:1417 [inline] __do_sys_creat fs/open.c:1495 [inline] __se_sys_creat fs/open.c:1489 [inline] __x64_sys_creat+0x123/0x170 fs/open.c:1489 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f Freed by task 5336: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x3f/0x80 mm/kasan/common.c:68 kasan_save_free_info+0x40/0x50 mm/kasan/generic.c:582 poison_slab_object mm/kasan/common.c:247 [inline] __kasan_slab_free+0x59/0x70 mm/kasan/common.c:264 kasan_slab_free include/linux/kasan.h:233 [inline] slab_free_hook mm/slub.c:2353 [inline] slab_free mm/slub.c:4613 [inline] kfree+0x196/0x430 mm/slub.c:4761 cleanup_transaction fs/btrfs/transaction.c:2063 [inline] btrfs_commit_transaction+0x2c97/0x3720 fs/btrfs/transaction.c:2598 insert_balance_item+0x1284/0x20b0 fs/btrfs/volumes.c:3757 btrfs_balance+0x992/ ---truncated---

In the Linux kernel, the following vulnerability has been resolved: media: venus: hfi: add check to handle incorrect queue size qsize represents size of shared queued between driver and video firmware. Firmware can modify this value to an invalid large value. In such situation, empty_space will be bigger than the space actually available. Since new_wr_idx is not checked, so the following code will result in an OOB write. ... qsize = qhdr->q_size if (wr_idx >= rd_idx) empty_space = qsize - (wr_idx - rd_idx) .... if (new_wr_idx < qsize) { memcpy(wr_ptr, packet, dwords << 2) --> OOB write Add check to ensure qsize is within the allocated size while reading and writing packets into the queue.

A vulnerability was found in kvm_s390_guest_sida_op in the arch/s390/kvm/kvm-s390.c function in KVM for s390 in the Linux kernel. This flaw allows a local attacker with a normal user privilege to obtain unauthorized memory write access. This flaw affects Linux kernel versions prior to 5.17-rc4.

In the Linux kernel, the following vulnerability has been resolved: proc: fix UAF in proc_get_inode() Fix race between rmmod and /proc/XXX's inode instantiation. The bug is that pde->proc_ops don't belong to /proc, it belongs to a module, therefore dereferencing it after /proc entry has been registered is a bug unless use_pde/unuse_pde() pair has been used. use_pde/unuse_pde can be avoided (2 atomic ops!) because pde->proc_ops never changes so information necessary for inode instantiation can be saved _before_ proc_register() in PDE itself and used later, avoiding pde->proc_ops->... dereference. rmmod lookup sys_delete_module proc_lookup_de pde_get(de); proc_get_inode(dir->i_sb, de); mod->exit() proc_remove remove_proc_subtree proc_entry_rundown(de); free_module(mod); if (S_ISREG(inode->i_mode)) if (de->proc_ops->proc_read_iter) --> As module is already freed, will trigger UAF BUG: unable to handle page fault for address: fffffbfff80a702b PGD 817fc4067 P4D 817fc4067 PUD 817fc0067 PMD 102ef4067 PTE 0 Oops: Oops: 0000 [#1] PREEMPT SMP KASAN PTI CPU: 26 UID: 0 PID: 2667 Comm: ls Tainted: G Hardware name: QEMU Standard PC (i440FX + PIIX, 1996) RIP: 0010:proc_get_inode+0x302/0x6e0 RSP: 0018:ffff88811c837998 EFLAGS: 00010a06 RAX: dffffc0000000000 RBX: ffffffffc0538140 RCX: 0000000000000007 RDX: 1ffffffff80a702b RSI: 0000000000000001 RDI: ffffffffc0538158 RBP: ffff8881299a6000 R08: 0000000067bbe1e5 R09: 1ffff11023906f20 R10: ffffffffb560ca07 R11: ffffffffb2b43a58 R12: ffff888105bb78f0 R13: ffff888100518048 R14: ffff8881299a6004 R15: 0000000000000001 FS: 00007f95b9686840(0000) GS:ffff8883af100000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: fffffbfff80a702b CR3: 0000000117dd2000 CR4: 00000000000006f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> proc_lookup_de+0x11f/0x2e0 __lookup_slow+0x188/0x350 walk_component+0x2ab/0x4f0 path_lookupat+0x120/0x660 filename_lookup+0x1ce/0x560 vfs_statx+0xac/0x150 __do_sys_newstat+0x96/0x110 do_syscall_64+0x5f/0x170 entry_SYSCALL_64_after_hwframe+0x76/0x7e [adobriyan@gmail.com: don't do 2 atomic ops on the common path]

A flaw use after free in the Linux kernel Management Component Transport Protocol (MCTP) subsystem was found in the way user triggers cancel_work_sync after the unregister_netdev during removing device. A local user could use this flaw to crash the system or escalate their privileges on the system. It is actual from Linux Kernel 5.17-rc1 (when mctp-serial.c introduced) till 5.17-rc5.

Incomplete fix for CVE-2021-3100. The Apache Log4j hotpatch package starting with log4j-cve-2021-44228-hotpatch-1.1-16 will now explicitly mimic the Linux capabilities and cgroups of the target Java process that the hotpatch is applied to.

In the Linux kernel, the following vulnerability has been resolved: mailbox: mtk-cmdq: fix wrong use of sizeof in cmdq_get_clocks() It should be size of the struct clk_bulk_data, not data pointer pass to devm_kcalloc().

In the Linux kernel, the following vulnerability has been resolved: ipv6: Fix out-of-bound access in fib6_add_rt2node(). syzbot reported out-of-bound read in fib6_add_rt2node(). [0] When IPv6 route is created with RTA_NH_ID, struct fib6_info does not have the trailing struct fib6_nh. The cited commit started to check !iter->fib6_nh->fib_nh_gw_family to ensure that rt6_qualify_for_ecmp() will return false for iter. If iter->nh is not NULL, rt6_qualify_for_ecmp() returns false anyway. Let's check iter->nh before reading iter->fib6_nh and avoid OOB read. [0]: BUG: KASAN: slab-out-of-bounds in fib6_add_rt2node+0x349c/0x3500 net/ipv6/ip6_fib.c:1142 Read of size 1 at addr ffff8880384ba6de by task syz.0.18/5500 CPU: 0 UID: 0 PID: 5500 Comm: syz.0.18 Not tainted syzkaller #0 PREEMPT(full) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0xe8/0x150 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 [inline] print_report+0xba/0x230 mm/kasan/report.c:482 kasan_report+0x117/0x150 mm/kasan/report.c:595 fib6_add_rt2node+0x349c/0x3500 net/ipv6/ip6_fib.c:1142 fib6_add_rt2node_nh net/ipv6/ip6_fib.c:1363 [inline] fib6_add+0x910/0x18c0 net/ipv6/ip6_fib.c:1531 __ip6_ins_rt net/ipv6/route.c:1351 [inline] ip6_route_add+0xde/0x1b0 net/ipv6/route.c:3957 inet6_rtm_newroute+0x268/0x19e0 net/ipv6/route.c:5660 rtnetlink_rcv_msg+0x7d5/0xbe0 net/core/rtnetlink.c:6958 netlink_rcv_skb+0x232/0x4b0 net/netlink/af_netlink.c:2550 netlink_unicast_kernel net/netlink/af_netlink.c:1318 [inline] netlink_unicast+0x80f/0x9b0 net/netlink/af_netlink.c:1344 netlink_sendmsg+0x813/0xb40 net/netlink/af_netlink.c:1894 sock_sendmsg_nosec net/socket.c:727 [inline] __sock_sendmsg net/socket.c:742 [inline] ____sys_sendmsg+0xa68/0xad0 net/socket.c:2592 ___sys_sendmsg+0x2a5/0x360 net/socket.c:2646 __sys_sendmsg net/socket.c:2678 [inline] __do_sys_sendmsg net/socket.c:2683 [inline] __se_sys_sendmsg net/socket.c:2681 [inline] __x64_sys_sendmsg+0x1bd/0x2a0 net/socket.c:2681 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xe2/0xf80 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f9316b9aeb9 Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 e8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007ffd8809b678 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00007f9316e15fa0 RCX: 00007f9316b9aeb9 RDX: 0000000000000000 RSI: 0000200000004380 RDI: 0000000000000003 RBP: 00007f9316c08c1f R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 00007f9316e15fac R14: 00007f9316e15fa0 R15: 00007f9316e15fa0 </TASK> Allocated by task 5499: kasan_save_stack mm/kasan/common.c:57 [inline] kasan_save_track+0x3e/0x80 mm/kasan/common.c:78 poison_kmalloc_redzone mm/kasan/common.c:398 [inline] __kasan_kmalloc+0x93/0xb0 mm/kasan/common.c:415 kasan_kmalloc include/linux/kasan.h:263 [inline] __do_kmalloc_node mm/slub.c:5657 [inline] __kmalloc_noprof+0x40c/0x7e0 mm/slub.c:5669 kmalloc_noprof include/linux/slab.h:961 [inline] kzalloc_noprof include/linux/slab.h:1094 [inline] fib6_info_alloc+0x30/0xf0 net/ipv6/ip6_fib.c:155 ip6_route_info_create+0x142/0x860 net/ipv6/route.c:3820 ip6_route_add+0x49/0x1b0 net/ipv6/route.c:3949 inet6_rtm_newroute+0x268/0x19e0 net/ipv6/route.c:5660 rtnetlink_rcv_msg+0x7d5/0xbe0 net/core/rtnetlink.c:6958 netlink_rcv_skb+0x232/0x4b0 net/netlink/af_netlink.c:2550 netlink_unicast_kernel net/netlink/af_netlink.c:1318 [inline] netlink_unicast+0x80f/0x9b0 net/netlink/af_netlink.c:1344 netlink_sendmsg+0x813/0xb40 net/netlink/af_netlink.c:1894 sock_sendmsg_nosec net/socket.c:727 [inline] __sock_sendmsg net/socket.c:742 [inline] ____sys_sendmsg+0xa68/0xad0 net/socket.c:2592 ___sys_s ---truncated---

In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix global oob in ksmbd_nl_policy Similar to a reported issue (check the commit b33fb5b801c6 ("net: qualcomm: rmnet: fix global oob in rmnet_policy"), my local fuzzer finds another global out-of-bounds read for policy ksmbd_nl_policy. See bug trace below: ================================================================== BUG: KASAN: global-out-of-bounds in validate_nla lib/nlattr.c:386 [inline] BUG: KASAN: global-out-of-bounds in __nla_validate_parse+0x24af/0x2750 lib/nlattr.c:600 Read of size 1 at addr ffffffff8f24b100 by task syz-executor.1/62810 CPU: 0 PID: 62810 Comm: syz-executor.1 Tainted: G N 6.1.0 #3 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x8b/0xb3 lib/dump_stack.c:106 print_address_description mm/kasan/report.c:284 [inline] print_report+0x172/0x475 mm/kasan/report.c:395 kasan_report+0xbb/0x1c0 mm/kasan/report.c:495 validate_nla lib/nlattr.c:386 [inline] __nla_validate_parse+0x24af/0x2750 lib/nlattr.c:600 __nla_parse+0x3e/0x50 lib/nlattr.c:697 __nlmsg_parse include/net/netlink.h:748 [inline] genl_family_rcv_msg_attrs_parse.constprop.0+0x1b0/0x290 net/netlink/genetlink.c:565 genl_family_rcv_msg_doit+0xda/0x330 net/netlink/genetlink.c:734 genl_family_rcv_msg net/netlink/genetlink.c:833 [inline] genl_rcv_msg+0x441/0x780 net/netlink/genetlink.c:850 netlink_rcv_skb+0x14f/0x410 net/netlink/af_netlink.c:2540 genl_rcv+0x24/0x40 net/netlink/genetlink.c:861 netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline] netlink_unicast+0x54e/0x800 net/netlink/af_netlink.c:1345 netlink_sendmsg+0x930/0xe50 net/netlink/af_netlink.c:1921 sock_sendmsg_nosec net/socket.c:714 [inline] sock_sendmsg+0x154/0x190 net/socket.c:734 ____sys_sendmsg+0x6df/0x840 net/socket.c:2482 ___sys_sendmsg+0x110/0x1b0 net/socket.c:2536 __sys_sendmsg+0xf3/0x1c0 net/socket.c:2565 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3b/0x90 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x7fdd66a8f359 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 f1 19 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fdd65e00168 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00007fdd66bbcf80 RCX: 00007fdd66a8f359 RDX: 0000000000000000 RSI: 0000000020000500 RDI: 0000000000000003 RBP: 00007fdd66ada493 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 00007ffc84b81aff R14: 00007fdd65e00300 R15: 0000000000022000 </TASK> The buggy address belongs to the variable: ksmbd_nl_policy+0x100/0xa80 The buggy address belongs to the physical page: page:0000000034f47940 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x1ccc4b flags: 0x200000000001000(reserved|node=0|zone=2) raw: 0200000000001000 ffffea00073312c8 ffffea00073312c8 0000000000000000 raw: 0000000000000000 0000000000000000 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffffffff8f24b000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffffffff8f24b080: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >ffffffff8f24b100: f9 f9 f9 f9 00 00 f9 f9 f9 f9 f9 f9 00 00 07 f9 ^ ffffffff8f24b180: f9 f9 f9 f9 00 05 f9 f9 f9 f9 f9 f9 00 00 00 05 ffffffff8f24b200: f9 f9 f9 f9 00 00 03 f9 f9 f9 f9 f9 00 00 04 f9 ================================================================== To fix it, add a placeholder named __KSMBD_EVENT_MAX and let KSMBD_EVENT_MAX to be its original value - 1 according to what other netlink families do. Also change two sites that refer the KSMBD_EVENT_MAX to correct value.

In the Linux kernel, the following vulnerability has been resolved: wifi: ath11k: update channel list in reg notifier instead reg worker Currently when ath11k gets a new channel list, it will be processed according to the following steps: 1. update new channel list to cfg80211 and queue reg_work. 2. cfg80211 handles new channel list during reg_work. 3. update cfg80211's handled channel list to firmware by ath11k_reg_update_chan_list(). But ath11k will immediately execute step 3 after reg_work is just queued. Since step 2 is asynchronous, cfg80211 may not have completed handling the new channel list, which may leading to an out-of-bounds write error: BUG: KASAN: slab-out-of-bounds in ath11k_reg_update_chan_list Call Trace: ath11k_reg_update_chan_list+0xbfe/0xfe0 [ath11k] kfree+0x109/0x3a0 ath11k_regd_update+0x1cf/0x350 [ath11k] ath11k_regd_update_work+0x14/0x20 [ath11k] process_one_work+0xe35/0x14c0 Should ensure step 2 is completely done before executing step 3. Thus Wen raised patch[1]. When flag NL80211_REGDOM_SET_BY_DRIVER is set, cfg80211 will notify ath11k after step 2 is done. So enable the flag NL80211_REGDOM_SET_BY_DRIVER then cfg80211 will notify ath11k after step 2 is done. At this time, there will be no KASAN bug during the execution of the step 3. [1] https://patchwork.kernel.org/project/linux-wireless/patch/20230201065313.27203-1-quic_wgong@quicinc.com/ Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3

In the Linux kernel, the following vulnerability has been resolved: mt76: mt7915: fix txrate reporting Properly check rate_info to fix unexpected reporting. [ 1215.161863] Call trace: [ 1215.164307] cfg80211_calculate_bitrate+0x124/0x200 [cfg80211] [ 1215.170139] ieee80211s_update_metric+0x80/0xc0 [mac80211] [ 1215.175624] ieee80211_tx_status_ext+0x508/0x838 [mac80211] [ 1215.181190] mt7915_mcu_get_rx_rate+0x28c/0x8d0 [mt7915e] [ 1215.186580] mt7915_mac_tx_free+0x324/0x7c0 [mt7915e] [ 1215.191623] mt7915_queue_rx_skb+0xa8/0xd0 [mt7915e] [ 1215.196582] mt76_dma_cleanup+0x7b0/0x11d0 [mt76] [ 1215.201276] __napi_poll+0x38/0xf8 [ 1215.204668] napi_workfn+0x40/0x80 [ 1215.208062] process_one_work+0x1fc/0x390 [ 1215.212062] worker_thread+0x48/0x4d0 [ 1215.215715] kthread+0x120/0x128 [ 1215.218935] ret_from_fork+0x10/0x1c

In the Linux kernel, the following vulnerability has been resolved: md/raid1: properly indicate failure when ending a failed write request This patch addresses a data corruption bug in raid1 arrays using bitmaps. Without this fix, the bitmap bits for the failed I/O end up being cleared. Since we are in the failure leg of raid1_end_write_request, the request either needs to be retried (R1BIO_WriteError) or failed (R1BIO_Degraded).

In the Linux kernel, the following vulnerability has been resolved: comedi: vmk80xx: fix bulk-buffer overflow The driver is using endpoint-sized buffers but must not assume that the tx and rx buffers are of equal size or a malicious device could overflow the slab-allocated receive buffer when doing bulk transfers.

In the Linux kernel, the following vulnerability has been resolved: RDMA/erdma: Prevent use-after-free in erdma_accept_newconn() After the erdma_cep_put(new_cep) being called, new_cep will be freed, and the following dereference will cause a UAF problem. Fix this issue.

In the Linux kernel, the following vulnerability has been resolved: can: sja1000: fix use after free in ems_pcmcia_add_card() If the last channel is not available then "dev" is freed. Fortunately, we can just use "pdev->irq" instead. Also we should check if at least one channel was set up.

In the Linux kernel, the following vulnerability has been resolved: spi: spi-zynqmp-gqspi: fix use-after-free in zynqmp_qspi_exec_op When handling op->addr, it is using the buffer "tmpbuf" which has been freed. This will trigger a use-after-free KASAN warning. Let's use temporary variables to store op->addr.val and op->cmd.opcode to fix this issue.

In the Linux kernel, the following vulnerability has been resolved: ext4: fix possible UAF when remounting r/o a mmp-protected file system After commit 618f003199c6 ("ext4: fix memory leak in ext4_fill_super"), after the file system is remounted read-only, there is a race where the kmmpd thread can exit, causing sbi->s_mmp_tsk to point at freed memory, which the call to ext4_stop_mmpd() can trip over. Fix this by only allowing kmmpd() to exit when it is stopped via ext4_stop_mmpd(). Bug-Report-Link: <20210629143603.2166962-1-yebin10@huawei.com>

In the Linux kernel, the following vulnerability has been resolved: net: fix use-after-free in tw_timer_handler A real world panic issue was found as follow in Linux 5.4. BUG: unable to handle page fault for address: ffffde49a863de28 PGD 7e6fe62067 P4D 7e6fe62067 PUD 7e6fe63067 PMD f51e064067 PTE 0 RIP: 0010:tw_timer_handler+0x20/0x40 Call Trace: <IRQ> call_timer_fn+0x2b/0x120 run_timer_softirq+0x1ef/0x450 __do_softirq+0x10d/0x2b8 irq_exit+0xc7/0xd0 smp_apic_timer_interrupt+0x68/0x120 apic_timer_interrupt+0xf/0x20 This issue was also reported since 2017 in the thread [1], unfortunately, the issue was still can be reproduced after fixing DCCP. The ipv4_mib_exit_net is called before tcp_sk_exit_batch when a net namespace is destroyed since tcp_sk_ops is registered befrore ipv4_mib_ops, which means tcp_sk_ops is in the front of ipv4_mib_ops in the list of pernet_list. There will be a use-after-free on net->mib.net_statistics in tw_timer_handler after ipv4_mib_exit_net if there are some inflight time-wait timers. This bug is not introduced by commit f2bf415cfed7 ("mib: add net to NET_ADD_STATS_BH") since the net_statistics is a global variable instead of dynamic allocation and freeing. Actually, commit 61a7e26028b9 ("mib: put net statistics on struct net") introduces the bug since it put net statistics on struct net and free it when net namespace is destroyed. Moving init_ipv4_mibs() to the front of tcp_init() to fix this bug and replace pr_crit() with panic() since continuing is meaningless when init_ipv4_mibs() fails. [1] https://groups.google.com/g/syzkaller/c/p1tn-_Kc6l4/m/smuL_FMAAgAJ?pli=1

In the Linux kernel, the following vulnerability has been resolved: watchdog: Fix possible use-after-free by calling del_timer_sync() This driver's remove path calls del_timer(). However, that function does not wait until the timer handler finishes. This means that the timer handler may still be running after the driver's remove function has finished, which would result in a use-after-free. Fix by calling del_timer_sync(), which makes sure the timer handler has finished, and unable to re-schedule itself.

In the Linux kernel, the following vulnerability has been resolved: io_uring: fix overflows checks in provide buffers Colin reported before possible overflow and sign extension problems in io_provide_buffers_prep(). As Linus pointed out previous attempt did nothing useful, see d81269fecb8ce ("io_uring: fix provide_buffers sign extension"). Do that with help of check_<op>_overflow helpers. And fix struct io_provide_buf::len type, as it doesn't make much sense to keep it signed.

In the Linux kernel, the following vulnerability has been resolved: media: davinci: vpif: fix use-after-free on driver unbind The driver allocates and registers two platform device structures during probe, but the devices were never deregistered on driver unbind. This results in a use-after-free on driver unbind as the device structures were allocated using devres and would be freed by driver core when remove() returns. Fix this by adding the missing deregistration calls to the remove() callback and failing probe on registration errors. Note that the platform device structures must be freed using a proper release callback to avoid leaking associated resources like device names.

In the Linux kernel, the following vulnerability has been resolved: sched/scs: Reset task stack state in bringup_cpu() To hot unplug a CPU, the idle task on that CPU calls a few layers of C code before finally leaving the kernel. When KASAN is in use, poisoned shadow is left around for each of the active stack frames, and when shadow call stacks are in use. When shadow call stacks (SCS) are in use the task's saved SCS SP is left pointing at an arbitrary point within the task's shadow call stack. When a CPU is offlined than onlined back into the kernel, this stale state can adversely affect execution. Stale KASAN shadow can alias new stackframes and result in bogus KASAN warnings. A stale SCS SP is effectively a memory leak, and prevents a portion of the shadow call stack being used. Across a number of hotplug cycles the idle task's entire shadow call stack can become unusable. We previously fixed the KASAN issue in commit: e1b77c92981a5222 ("sched/kasan: remove stale KASAN poison after hotplug") ... by removing any stale KASAN stack poison immediately prior to onlining a CPU. Subsequently in commit: f1a0a376ca0c4ef1 ("sched/core: Initialize the idle task with preemption disabled") ... the refactoring left the KASAN and SCS cleanup in one-time idle thread initialization code rather than something invoked prior to each CPU being onlined, breaking both as above. We fixed SCS (but not KASAN) in commit: 63acd42c0d4942f7 ("sched/scs: Reset the shadow stack when idle_task_exit") ... but as this runs in the context of the idle task being offlined it's potentially fragile. To fix these consistently and more robustly, reset the SCS SP and KASAN shadow of a CPU's idle task immediately before we online that CPU in bringup_cpu(). This ensures the idle task always has a consistent state when it is running, and removes the need to so so when exiting an idle task. Whenever any thread is created, dup_task_struct() will give the task a stack which is free of KASAN shadow, and initialize the task's SCS SP, so there's no need to specially initialize either for idle thread within init_idle(), as this was only necessary to handle hotplug cycles. I've tested this on arm64 with: * gcc 11.1.0, defconfig +KASAN_INLINE, KASAN_STACK * clang 12.0.0, defconfig +KASAN_INLINE, KASAN_STACK, SHADOW_CALL_STACK ... offlining and onlining CPUS with: | while true; do | for C in /sys/devices/system/cpu/cpu*/online; do | echo 0 > $C; | echo 1 > $C; | done | done

In the Linux kernel, the following vulnerability has been resolved: KVM: nVMX: Always make an attempt to map eVMCS after migration When enlightened VMCS is in use and nested state is migrated with vmx_get_nested_state()/vmx_set_nested_state() KVM can't map evmcs page right away: evmcs gpa is not 'struct kvm_vmx_nested_state_hdr' and we can't read it from VP assist page because userspace may decide to restore HV_X64_MSR_VP_ASSIST_PAGE after restoring nested state (and QEMU, for example, does exactly that). To make sure eVMCS is mapped /vmx_set_nested_state() raises KVM_REQ_GET_NESTED_STATE_PAGES request. Commit f2c7ef3ba955 ("KVM: nSVM: cancel KVM_REQ_GET_NESTED_STATE_PAGES on nested vmexit") added KVM_REQ_GET_NESTED_STATE_PAGES clearing to nested_vmx_vmexit() to make sure MSR permission bitmap is not switched when an immediate exit from L2 to L1 happens right after migration (caused by a pending event, for example). Unfortunately, in the exact same situation we still need to have eVMCS mapped so nested_sync_vmcs12_to_shadow() reflects changes in VMCS12 to eVMCS. As a band-aid, restore nested_get_evmcs_page() when clearing KVM_REQ_GET_NESTED_STATE_PAGES in nested_vmx_vmexit(). The 'fix' is far from being ideal as we can't easily propagate possible failures and even if we could, this is most likely already too late to do so. The whole 'KVM_REQ_GET_NESTED_STATE_PAGES' idea for mapping eVMCS after migration seems to be fragile as we diverge too much from the 'native' path when vmptr loading happens on vmx_set_nested_state().