Stack-based buffer overflow in goform/formExportDataLogs in HP Power Manager before 4.2.10 allows remote attackers to execute arbitrary code via a long fileName parameter.

Multiple heap-based buffer overflows in ovlogin.exe in HP OpenView Network Node Manager (OV NNM) 7.01, 7.51, and 7.53 allow remote attackers to execute arbitrary code via a long (1) userid or (2) passwd parameter.

HPE Data Protector before 7.03_108, 8.x before 8.15, and 9.x before 9.06 allows remote attackers to execute arbitrary code via unspecified vectors, aka ZDI-CAN-3353.

Unspecified vulnerability in the Portal in HP Operations Dashboard 2.1 on Windows Server 2003 SP2 allows remote attackers to have an unknown impact, related to a "Remote exploit," as demonstrated by a certain module in VulnDisco Pack Professional 8.11. NOTE: as of 20090903, this disclosure has no actionable information. However, because the VulnDisco Pack author is a reliable researcher, the issue is being assigned a CVE identifier for tracking purposes.

Unspecified vulnerability in HP OpenView Network Node Manager (OV NNM) 7.01, 7.51, and 7.53 allows remote attackers to execute arbitrary code via unknown vectors.

Stack-based buffer overflow in the OmniInet process in HP OpenView Data Protector Application Recovery Manager 5.50 and 6.0 allows remote attackers to execute arbitrary code or cause a denial of service via a crafted MSG_PROTOCOL packet.

Multiple stack-based buffer overflows in HP OpenView Network Node Manager (OV NNM) 7.01, 7.51, and 7.53 allow remote attackers to execute arbitrary code via (1) a long Template parameter to nnmRptConfig.exe, related to the strcat function; or (2) a long Oid parameter to snmp.exe.

Unspecified vulnerability on the HP Color LaserJet M3530 Multifunction Printer with firmware 05.058.4 and the Color LaserJet CP3525 Printer with firmware 53.021.2 allows remote attackers to obtain "access to data" or cause a denial of service via unknown vectors.

Unspecified vulnerability in HP Data Protector Notebook Extension 6.20 and Data Protector for Personal Computers 7.0 allows remote attackers to execute arbitrary code via unknown vectors, aka ZDI-CAN-1226.

Unspecified vulnerability in HP ProCurve Threat Management Services zl Module (J9155A) ST.1.0.090213 and earlier allows remote attackers to gain privileges via unknown vectors, aka PR_41209.

Stack-based buffer overflow in rping in HP OpenView Network Node Manager (OV NNM) 7.51 and 7.53, when used with SNMP (aka HPOvNNM.HPOVSNMP) before 1.30.009 and MIB (aka HPOvNNM.HPOVMIB) before 1.30.009, allows remote attackers to execute arbitrary code or cause a denial of service via unknown vectors.

Multiple heap-based buffer overflows in OvCgi/Toolbar.exe in HP OpenView Network Node Manager (OV NNM) 7.01, 7.51, and 7.53 allow remote attackers to execute arbitrary code via (1) a long OvAcceptLang cookie, which triggers the error in ov.dll and ovwww.dll, or (2) a long Accept-Language HTTP header, which triggers the error in ovwww.dll or libovwww.so.4.

Multiple unspecified vulnerabilities in HP Performance Insight 5.3 allow remote attackers to have an unknown impact, related to (1) a "Remote exploit" on Windows platforms, and (2) a "Remote preauthentication exploit" on the Windows Server 2003 SP2 platform, as demonstrated by certain modules in VulnDisco Pack Professional 8.11. NOTE: as of 20090903, this disclosure has no actionable information. However, because the VulnDisco Pack author is a reliable researcher, the issue is being assigned a CVE identifier for tracking purposes.

Unspecified vulnerability in Easy Login in the Sender module in HP Remote Graphics Software (RGS) 4.0.0 through 5.2.4 allows remote attackers to execute arbitrary code via unknown vectors.

Unspecified vulnerability in HP Virtual Rooms Client before 7.0.1, when running on Windows, allows remote attackers to execute arbitrary code via unknown vectors.

A remote unauthenticated directory traversal security vulnerability has been identified in HPE iLO Amplifier Pack versions 1.80, 1.81, 1.90 and 1.95. The vulnerability could be remotely exploited to allow an unauthenticated user to run arbitrary code leading complete impact to confidentiality, integrity, and availability of the iLO Amplifier Pack appliance.

HPE Data Protector before 7.03_108, 8.x before 8.15, and 9.x before 9.06 allows remote attackers to execute arbitrary code via unspecified vectors, aka ZDI-CAN-3354.

A security vulnerability was identified in 3PAR Service Processor (SP) prior to SP-4.4.0.GA-110(MU7). The vulnerability may be exploited remotely to allow code execution.

A remote bypass of security restrictions vulnerability was identified in HPE Moonshot Provisioning Manager prior to v1.24.

HPE Data Protector before 7.03_108, 8.x before 8.15, and 9.x before 9.06 allows remote attackers to execute arbitrary code via unspecified vectors, aka ZDI-CAN-3352.

Stack-based buffer overflow in the Process Software MultiNet finger service (aka FINGERD) for HP OpenVMS 8.3 allows remote attackers to execute arbitrary code via a long request string.

A Remote Code Execution vulnerability was identified in HPE Intelligent Management Center (iMC) Wireless Services Manager Software earlier than version IMC WSM 7.3 E0506P02.

A remote code execution vulnerability was identified in HPE Intelligent Management Center (iMC) prior to iMC PLAT 7.3 E0605P04.

A remote code execution vulnerability was identified in HPE Intelligent Management Center (IMC) PLAT earlier than version 7.3 E0506P09.

A security vulnerability was identified in 3PAR Service Processor (SP) prior to SP-4.4.0.GA-110(MU7). The vulnerability may be exploited remotely to allow access restriction bypass.

A potential security vulnerability has been identified in the HPE Moonshot Provisioning Manager v1.20. The HPE Moonshot Provisioning Manager is an application that is installed in a VMWare or Microsoft Hyper-V environment that is used to setup and configure an HPE Moonshot 1500 chassis. This vulnerability could be remotely exploited by an unauthenticated user to cause a directory traversal in user supplied input to the `khuploadfile.cgi` CGI ELF. The directory traversal could lead to Remote Code Execution, Denial of Service, and/or compromise system integrity. **Note:** HPE recommends that customers discontinue the use of the HPE Moonshot Provisioning Manager. The HPE Moonshot Provisioning Manager application is discontinued, no longer supported, is not available to download from the HPE Support Center, and no patch is available.

In HP LaserJet Enterprise, HP PageWide Enterprise, HP LaserJet Managed, and HP OfficeJet Enterprise Printers, solution application signature checking may allow potential execution of arbitrary code.

Stack-based buffer overflow in ovwparser.dll in HP OpenView Network Node Manager (OV NNM) 7.53, 7.51, and earlier allows remote attackers to execute arbitrary code via a long URI in an HTTP request processed by ovas.exe, as demonstrated by a certain topology/homeBaseView request. NOTE: some of these details are obtained from third party information.

Multiple buffer overflows in the WebHPVCInstall.HPVirtualRooms14 ActiveX control in HPVirtualRooms14.dll 1.0.0.100, as used in the installation process for HP Virtual Rooms, allow remote attackers to execute arbitrary code via a long (1) AuthenticationURL, (2) PortalAPIURL, or (3) cabroot property value. NOTE: some of these details are obtained from third party information.

Buffer overflow in the ovlaunch CGI program in HP OpenView Network Node Manager (OV NNM) 7.01, 7.51, and 7.53 on Windows allows remote attackers to execute arbitrary code via a crafted Host parameter. NOTE: this issue may be partially covered by CVE-2009-0205.

Unspecified vulnerability in HP OpenView Network Node Manager (OV NNM) 7.01, 7.51, and 7.53 allows remote attackers to execute arbitrary code via unknown vectors.

Buffer overflow in ldcconn in Hewlett-Packard (HP) Controller for Cisco Local Director on HP-UX 11.11i allows remote attackers to execute arbitrary code via a long string to TCP port 17781.

OpenSSL through 1.0.2h incorrectly uses pointer arithmetic for heap-buffer boundary checks, which might allow remote attackers to cause a denial of service (integer overflow and application crash) or possibly have unspecified other impact by leveraging unexpected malloc behavior, related to s3_srvr.c, ssl_sess.c, and t1_lib.c.

HPE Insight Control before 7.5.1 allow remote attackers to obtain sensitive information, modify data, or cause a denial of service via unspecified vectors.

The BN_bn2dec function in crypto/bn/bn_print.c in OpenSSL before 1.1.0 does not properly validate division results, which allows remote attackers to cause a denial of service (out-of-bounds write and application crash) or possibly have unspecified other impact via unknown vectors.

Unspecified vulnerability in the Secure Shell (SSH) in HP Tru64 UNIX 5.1B-4 and 5.1B-3 allows remote attackers to identify valid users via unspecified vectors, probably related to timing attacks and AuthInteractiveFailureRandomTimeout.

The validateAdminConfig handler in the Analytics Management Console in HPE Vertica 7.0.x before 7.0.2.12, 7.1.x before 7.1.2-12, and 7.2.x before 7.2.2-1 allows remote attackers to execute arbitrary commands via the mcPort parameter, aka ZDI-CAN-3417.

HPE System Management Homepage before 7.5.4 allows remote attackers to execute arbitrary code via unspecified vectors.

HPE P9000 Command View Advanced Edition Software (CVAE) 7.x and 8.x before 8.4.0-00 and XP7 CVAE 7.x and 8.x before 8.4.0-00 allow remote attackers to execute arbitrary commands via a crafted serialized Java object, related to the Apache Commons Collections (ACC) library.

HP Continuous Delivery Automation (CDA) 1.30 allows remote attackers to execute arbitrary commands via a crafted serialized Java object, related to the Apache Commons Collections library.

A remote code execution vulnerability was identified in HPE Intelligent Management Center (iMC) PLAT 7.3 E0506P07. The vulnerability was resolved in iMC PLAT 7.3 E0605P04 or subsequent version.

Integer overflow in the _ncp32._NtrpTCPReceiveMsg function in rds.exe in the Cell Manager Database Service in the Application Recovery Manager component in HP OpenView Storage Data Protector 5.50 and 6.0 allows remote attackers to execute arbitrary code via a large value in the size parameter.

Stack-based buffer overflow in OmniInet.exe (aka the backup client service daemon) in the Application Recovery Manager component in HP OpenView Storage Data Protector 5.50 and 6.0 allows remote attackers to execute arbitrary code via an MSG_PROTOCOL command with long arguments, a different vulnerability than CVE-2009-3844.

HPE Data Protector before 7.03_108, 8.x before 8.15, and 9.x before 9.06 allow remote attackers to execute arbitrary code via unspecified vectors related to lack of authentication. NOTE: this vulnerability exists because of an incomplete fix for CVE-2014-2623.

A remote code execution vulnerability was identified in HPE Intelligent Management Center (IMC) PLAT earlier than version 7.3 E0506P09.

HPE Network Automation 9.22 through 9.22.02 and 10.x before 10.00.02 allows remote attackers to execute arbitrary code or obtain sensitive information via unspecified vectors, a different vulnerability than CVE-2016-1989.

A Remote Code Execution vulnerability was identified in HPE Intelligent Management Center (iMC) Wireless Services Manager Software earlier than version IMC WSM 7.3 E0506P02.

A security vulnerability has been identified with certain HP Inkjet printers. A maliciously crafted file sent to an affected device can cause a stack buffer overflow, which could allow remote code execution.