A vulnerability in the CLI of Cisco IOS XE Software for Cisco Catalyst 9000 Family Switches and Cisco Catalyst 9000 Family Wireless Controllers could allow an authenticated, local attacker to elevate privileges to level 15 on an affected device. This vulnerability is due to insufficient validation of user privileges after the user executes certain CLI commands. An attacker could exploit this vulnerability by logging in to an affected device as a low-privileged user and then executing certain CLI commands. A successful exploit could allow the attacker to execute arbitrary commands with level 15 privileges on the affected device.

Multiple vulnerabilities in the Cisco IOx application hosting environment on multiple Cisco platforms could allow an attacker to inject arbitrary commands into the underlying host operating system, execute arbitrary code on the underlying host operating system, install applications without being authenticated, or conduct a cross-site scripting (XSS) attack against a user of the affected software. For more information about these vulnerabilities, see the Details section of this advisory.

A vulnerability in the build procedure for certain executable system files installed at boot time on Cisco Application Policy Infrastructure Controller (APIC) devices could allow an authenticated, local attacker to gain root-level privileges. The vulnerability is due to a custom executable system file that was built to use relative search paths for libraries without properly validating the library to be loaded. An attacker could exploit this vulnerability by authenticating to the device and loading a malicious library that can escalate the privilege level. A successful exploit could allow the attacker to gain root-level privileges and take full control of the device. The attacker must have valid user credentials to log in to the device. Cisco Bug IDs: CSCvc96087. Known Affected Releases: 1.1(0.920a), 1.1(1j), 1.1(3f); 1.2 Base, 1.2(2), 1.2(3), 1.2.2; 1.3(1), 1.3(2), 1.3(2f); 2.0 Base, 2.0(1).

Multiple vulnerabilities that affect Cisco Catalyst Digital Building Series Switches and Cisco Catalyst Micro Switches could allow an attacker to execute persistent code at boot time or to permanently prevent the device from booting, resulting in a permanent denial of service (DoS) condition. For more information about these vulnerabilities, see the Details section of this advisory.

A vulnerability in the CLI of Cisco StarOS could allow an authenticated, local attacker to elevate privileges on an affected device. This vulnerability is due to insufficient input validation of CLI commands. An attacker could exploit this vulnerability by sending crafted commands to the CLI. A successful exploit could allow the attacker to execute arbitrary code with the privileges of the root user. To exploit this vulnerability, an attacker would need to have valid administrative credentials on an affected device.

Multiple unspecified vulnerabilities in the Command Line Interface (CLI) for Cisco Security Monitoring, Analysis and Response System (CS-MARS) before 4.2.1, allow local CS-MARS administrators to execute arbitrary commands as root.

Multiple vulnerabilities in Cisco Small Business RV160, RV260, RV340, and RV345 Series Routers could allow an attacker to do any of the following: Execute arbitrary code Elevate privileges Execute arbitrary commands Bypass authentication and authorization protections Fetch and run unsigned software Cause denial of service (DoS) For more information about these vulnerabilities, see the Details section of this advisory.

A vulnerability in the Common Execution Environment (CEE) ConfD CLI of Cisco Ultra Cloud Core - Subscriber Microservices Infrastructure (SMI) software could allow an authenticated, local attacker to escalate privileges on an affected device. This vulnerability is due to insufficient access control in the affected CLI. An attacker could exploit this vulnerability by authenticating as a CEE ConfD CLI user and executing a specific CLI command. A successful exploit could allow an attacker to access privileged containers with root privileges.

A vulnerability in the CLI parser of the Cisco Web Security Appliance (WSA) could allow an authenticated, local attacker to perform command injection and elevate privileges to root. The attacker must authenticate with valid operator-level or administrator-level credentials. Affected Products: virtual and hardware versions of Cisco Web Security Appliance (WSA). More Information: CSCvd88855. Known Affected Releases: 10.1.0-204. Known Fixed Releases: 10.5.1-270 10.1.1-234.

A vulnerability in the installation procedure for Cisco Prime Network Software could allow an authenticated, local attacker to elevate their privileges to root privileges. More Information: CSCvd47343. Known Affected Releases: 4.2(2.1)PP1 4.2(3.0)PP6 4.3(0.0)PP4 4.3(1.0)PP2. Known Fixed Releases: 4.3(2).

A vulnerability in the debug plug-in functionality of the Cisco Unified Computing System (UCS) Manager, Cisco Firepower 4100 Series Next-Generation Firewall (NGFW), and Cisco Firepower 9300 Security Appliance could allow an authenticated, local attacker to execute arbitrary commands, aka Privilege Escalation. More Information: CSCvb86725 CSCvb86797. Known Affected Releases: 2.0(1.68) 3.1(1k)A. Known Fixed Releases: 92.2(1.105) 92.1(1.1733) 2.1(1.69).

A vulnerability in the CLI of Cisco IOS XR Software could allow an authenticated, local attacker to execute arbitrary commands on the host operating system with root privileges, aka Command Injection. More Information: CSCvb99406. Known Affected Releases: 6.2.1.BASE. Known Fixed Releases: 6.2.1.28i.BASE 6.2.1.22i.BASE 6.1.32.8i.BASE 6.1.31.3i.BASE 6.1.3.10i.BASE.

A vulnerability in the backup and restore functionality of Cisco FireSIGHT System Software could allow an authenticated, local attacker to execute arbitrary code on a targeted system. More Information: CSCvc91092. Known Affected Releases: 6.2.0 6.2.1.

A vulnerability in the CLI command-parsing code of Cisco Meeting Server could allow an authenticated, local attacker to perform command injection and escalate their privileges to root. The attacker must first authenticate to the application with valid administrator credentials. The vulnerability is due to insufficient validation of user-supplied input at the CLI for certain commands. An attacker could exploit this vulnerability by authenticating to the affected application and submitting a crafted CLI command for execution at the Cisco Meeting Server CLI. An exploit could allow the attacker to perform command injection and escalate their privilege level to root. Vulnerable Products: This vulnerability exists in Cisco Meeting Server software versions prior to and including 2.0, 2.1, and 2.2. Cisco Bug IDs: CSCvf53830.

A vulnerability in the CLI of Cisco IOS XR Software could allow an authenticated, local attacker to elevate privileges to the root level. More Information: CSCvb99384. Known Affected Releases: 6.2.1.BASE. Known Fixed Releases: 6.2.11.3i.ROUT 6.2.1.29i.ROUT 6.2.1.26i.ROUT.

Multiple vulnerabilities in Cisco Small Business RV160, RV260, RV340, and RV345 Series Routers could allow an attacker to do any of the following: Execute arbitrary code Elevate privileges Execute arbitrary commands Bypass authentication and authorization protections Fetch and run unsigned software Cause denial of service (DoS) For more information about these vulnerabilities, see the Details section of this advisory.

A vulnerability in the CLI of Cisco SD-WAN Software could allow an authenticated, local attacker to gain escalated privileges. This vulnerability is due to improper access control on files within the affected system. A local attacker could exploit this vulnerability by modifying certain files on the vulnerable device. If successful, the attacker could gain escalated privileges and take actions on the system with the privileges of the root user.

A vulnerability in the Tool Command Language (Tcl) interpreter of Cisco IOS XE Software could allow an authenticated, local attacker to escalate from privilege level 15 to root-level privileges. This vulnerability is due to insufficient input validation of data that is passed into the Tcl interpreter. An attacker could exploit this vulnerability by loading malicious Tcl code on an affected device. A successful exploit could allow the attacker to execute arbitrary commands as root. By default, Tcl shell access requires privilege level 15.

Multiple vulnerabilities in the Cisco IOx application hosting environment on multiple Cisco platforms could allow an attacker to inject arbitrary commands into the underlying host operating system, execute arbitrary code on the underlying host operating system, install applications without being authenticated, or conduct a cross-site scripting (XSS) attack against a user of the affected software. For more information about these vulnerabilities, see the Details section of this advisory.

Cisco Secure Access Control Server (ACS) 3.x for Windows stores ACS administrator passwords and the master key in the registry with insecure permissions, which allows local users and remote administrators to decrypt the passwords by using Microsoft's cryptographic API functions to obtain the plaintext version of the master key.

A vulnerability in how DLL files are loaded with Cisco AnyConnect Secure Mobility Client for Windows could allow an authenticated, local attacker to install and run an executable file with privileges equivalent to the Microsoft Windows SYSTEM account. The vulnerability is due to incomplete input validation of path and file names of a DLL file before it is loaded. An attacker could exploit this vulnerability by creating a malicious DLL file and installing it in a specific system directory. A successful exploit could allow the attacker to execute commands on the underlying Microsoft Windows host with privileges equivalent to the SYSTEM account. The attacker would need valid user credentials to exploit this vulnerability. This vulnerability affects all Cisco AnyConnect Secure Mobility Client for Windows software versions prior to 4.4.02034. Cisco Bug IDs: CSCvc97928.

A vulnerability in the Network Access Manager (NAM) module of Cisco AnyConnect Secure Mobility Client for Windows could allow an authenticated, local attacker to escalate privileges on an affected device. This vulnerability is due to incorrect privilege assignment to scripts executed before user logon. An attacker could exploit this vulnerability by configuring a script to be executed before logon. A successful exploit could allow the attacker to execute arbitrary code with SYSTEM privileges.

Cisco Security Monitoring, Analysis and Response System (CS-MARS) before 4.1.3 has an undocumented administrative account with a default password, which allows local users to gain privileges via the expert command.

A vulnerability in the Telnet CLI command of Cisco NX-OS System Software 7.1 through 7.3 running on Cisco Nexus Series Switches could allow an authenticated, local attacker to perform a command injection attack. The vulnerability is due to insufficient input validation of command arguments. An attacker could exploit this vulnerability by injecting crafted command arguments into the Telnet CLI command. An exploit could allow the attacker to read or write arbitrary files at the user's privilege level outside of the user's path. Cisco Bug IDs: CSCvb86771.

A vulnerability in a script file that is installed as part of the Cisco Policy Suite (CPS) Software distribution for the CPS appliance could allow an authenticated, local attacker to escalate their privilege level to root. The vulnerability is due to incorrect sudoers permissions on the script file. An attacker could exploit this vulnerability by authenticating to the device and providing crafted user input at the CLI, using this script file to escalate their privilege level and execute commands as root. A successful exploit could allow the attacker to acquire root-level privileges and take full control of the appliance. The user has to be logged-in to the device with valid credentials for a specific set of users. The Cisco Policy Suite application is vulnerable when running software versions 10.0.0, 10.1.0, or 11.0.0. Cisco Bug IDs: CSCvc07366.

Buffer overflows in the Cisco VPN 5000 Client before 5.2.7 for Linux, and VPN 5000 Client before 5.2.8 for Solaris, allow local users to gain root privileges via (1) close_tunnel and (2) open_tunnel.

A vulnerability in the CLI of Cisco NX-OS System Software 7.1 through 7.3 running on Cisco Nexus Series Switches could allow an authenticated, local attacker to perform a command injection attack. The vulnerability is due to insufficient input validation of command arguments. An attacker could exploit this vulnerability by injecting crafted command arguments into a vulnerable CLI command. An exploit could allow the attacker to read or write arbitrary files at the user's privilege level outside of the user's path. Cisco Bug IDs: CSCvb86787, CSCve60516, CSCve60555.

A vulnerability in the Start Before Logon (SBL) module of Cisco AnyConnect Secure Mobility Client Software for Windows could allow an unauthenticated, local attacker to open Internet Explorer with the privileges of the SYSTEM user. The vulnerability is due to insufficient implementation of the access controls. An attacker could exploit this vulnerability by opening the Internet Explorer browser. An exploit could allow the attacker to use Internet Explorer with the privileges of the SYSTEM user. This may allow the attacker to execute privileged commands on the targeted system. This vulnerability affects versions prior to released versions 4.4.00243 and later and 4.3.05017 and later. Cisco Bug IDs: CSCvc43976.

Unspecified vulnerability in the command line processing (CLI) logic in Cisco Intrusion Prevention System 5.0(1) and 5.0(2) allows local users with OPERATOR or VIEWER privileges to gain additional privileges via unknown vectors.

Multiple vulnerabilities in image verification checks of Cisco Network Convergence System (NCS) 540 Series Routers, only when running Cisco IOS XR NCS540L software images, and Cisco IOS XR Software for Cisco 8000 Series Routers could allow an authenticated, local attacker to execute arbitrary code on the underlying operating system. For more information about these vulnerabilities, see the Details section of this advisory.

A vulnerability in the AppDynamics .NET Agent for Windows could allow an attacker to leverage an authenticated, local user account to gain SYSTEM privileges. This vulnerability is due to the .NET Agent Coordinator Service executing code with SYSTEM privileges. An attacker with local access to a device that is running the vulnerable agent could create a custom process that would be launched with those SYSTEM privileges. A successful exploit could allow the attacker to execute arbitrary commands on the underlying operating system. This vulnerability is fixed in AppDynamics .NET Agent Release 21.7.

A vulnerability in the CLI of Cisco NX-OS System Software could allow an authenticated, local attacker to perform a command injection attack. An attacker would need valid administrator credentials to perform this exploit. The vulnerability is due to insufficient input validation during the installation of a software patch. An attacker could exploit this vulnerability by installing a crafted patch image with the vulnerable operation occurring prior to patch activation. An exploit could allow the attacker to execute arbitrary commands on an affected system as root. This vulnerability affects the following products running Cisco NX-OS System Software: Multilayer Director Switches, Nexus 2000 Series Fabric Extenders, Nexus 5000 Series Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Unified Computing System Manager. Cisco Bug IDs: CSCvf23735, CSCvg04072.

Unspecified vulnerability in Cisco Security Agent (CSA) 4.5.0 and 4.5.1 agents, when running on Windows systems, allows local users to bypass protections and gain system privileges by executing certain local software.

Cisco Content Services (CSS) switch products 11800 and earlier, aka Arrowpoint, allows local users to gain privileges by entering debug mode.

A vulnerability the Cisco Enterprise NFV Infrastructure Software (NFVIS) restricted CLI could allow an authenticated, local attacker with valid administrator-level credentials to elevate privileges and execute arbitrary commands on the underlying operating system as root. The vulnerability is due to insufficient restrictions during the execution of an affected CLI command. An attacker could exploit this vulnerability by leveraging the insufficient restrictions during the execution of an affected command. A successful exploit could allow the attacker to elevate privileges and execute arbitrary commands on the underlying operating system as root.

A vulnerability in Cisco Advanced Malware Protection (AMP) for Endpoints for Windows could allow an authenticated, local attacker with administrator privileges to execute arbitrary code. The vulnerability is due to insufficient validation of dynamically loaded modules. An attacker could exploit this vulnerability by placing a file in a specific location in the Windows filesystem. A successful exploit could allow the attacker to execute the code with the privileges of the AMP service.

A vulnerability in Cisco IOS XE SD-WAN Software could allow an unauthenticated, local attacker to gain unauthorized access to an affected device. The vulnerability is due to the existence of default credentials within the default configuration of an affected device. An attacker who has access to an affected device could log in with elevated privileges. A successful exploit could allow the attacker to take complete control of the device. This vulnerability affects Cisco devices that are running Cisco IOS XE SD-WAN Software releases 16.11 and earlier.

A vulnerability in the CLI of Cisco Unified Communications Domain Manager (Cisco Unified CDM) Software could allow an authenticated, local attacker to escape the restricted shell. The vulnerability is due to insufficient input validation of shell commands. An attacker could exploit this vulnerability by executing crafted commands in the shell. A successful exploit could allow the attacker to escape the restricted shell and access commands in the context of the restricted shell user, which does not have root privileges.

Multiple vulnerabilities in the smart tunnel functionality of Cisco Adaptive Security Appliance (ASA) could allow an authenticated, local attacker to elevate privileges to the root user or load a malicious library file while the tunnel is being established. For more information about these vulnerabilities, see the Details section of this security advisory.

A vulnerability in a specific CLI command within the local management (local-mgmt) context for Cisco UCS Fabric Interconnect Software could allow an authenticated, local attacker to gain elevated privileges as the root user on an affected device. The vulnerability is due to extraneous subcommand options present for a specific CLI command within the local-mgmt context. An attacker could exploit this vulnerability by authenticating to an affected device, entering the local-mgmt context, and issuing a specific CLI command and submitting user input. A successful exploit could allow the attacker to execute arbitrary operating system commands as root on an affected device. The attacker would need to have valid user credentials for the device.

A vulnerability in the CLI of Cisco NX-OS Software could allow an authenticated, local attacker to execute arbitrary commands with elevated privileges on the underlying operating system of an affected device. The vulnerability is due to insufficient validation of arguments passed to certain CLI commands. An attacker could exploit this vulnerability by including malicious input as the argument of an affected command. A successful exploit could allow the attacker to execute arbitrary commands on the underlying operating system with elevated privileges. An attacker would need valid user credentials to exploit this vulnerability.

A vulnerability in the CLI of Cisco NX-OS Software could allow an authenticated, local attacker with valid administrator credentials to execute arbitrary commands on the underlying operating system of an affected device. The vulnerability is due to insufficient validation of arguments passed to certain CLI commands. An attacker could exploit this vulnerability by including malicious input as the argument of an affected command. A successful exploit could allow the attacker to execute arbitrary commands on the underlying operating system with elevated privileges. An attacker would need valid administrator credentials to exploit this vulnerability.

A vulnerability in the CLI of Cisco FXOS Software and Cisco NX-OS Software could allow an authenticated, local attacker to execute arbitrary commands on the underlying operating system of an affected device. This vulnerability is due to insufficient validation of arguments passed to certain CLI commands. An attacker could exploit this vulnerability by including malicious input as the argument of an affected command. A successful exploit could allow the attacker to execute arbitrary commands on the underlying operating system with elevated privileges. An attacker would need administrator credentials to exploit this vulnerability.

A vulnerability in the Image Signature Verification feature of Cisco NX-OS Software could allow an authenticated, local attacker with administrator-level credentials to install a malicious software image on an affected device. The vulnerability exists because software digital signatures are not properly verified during CLI command execution. An attacker could exploit this vulnerability to install an unsigned software image on an affected device.

A vulnerability in the CLI of Cisco NX-OS Software could allow an authenticated, local attacker with administrator credentials to execute arbitrary commands on the underlying Linux operating system with the privilege level of root. The vulnerability is due to insufficient validation of arguments passed to a specific CLI command on the affected device. An attacker could exploit this vulnerability by including malicious input as the argument of an affected command. A successful exploit could allow the attacker to execute arbitrary commands on the underlying Linux operating system with elevated privileges. An attacker would need valid administrator credentials to exploit this vulnerability.

A vulnerability in the CLI of Cisco FXOS Software and Cisco NX-OS Software could allow an authenticated, local attacker to execute arbitrary commands on the underlying Linux operating system with the privilege level of root. The vulnerability is due to insufficient validation of arguments passed to a specific CLI command on the affected device. An attacker could exploit this vulnerability by including malicious input as the argument of an affected command. A successful exploit could allow the attacker to execute arbitrary commands on the underlying Linux operating system with elevated privileges. An attacker would need valid administrator credentials to exploit this vulnerability.

A vulnerability in the CLI of Cisco FXOS Software and Cisco NX-OS Software could allow an authenticated, local attacker to execute arbitrary commands on the underlying operating system of an affected device. This vulnerability is due to insufficient validation of arguments passed to certain CLI commands. An attacker could exploit this vulnerability by including malicious input as the argument of an affected command. A successful exploit could allow the attacker to execute arbitrary commands on the underlying operating system with elevated privileges. An attacker would need administrator credentials to exploit this vulnerability.