On April 20, 2022, the following vulnerability in the ClamAV scanning library versions 0.103.5 and earlier and 0.104.2 and earlier was disclosed: A vulnerability in the TIFF file parser of Clam AntiVirus (ClamAV) versions 0.104.0 through 0.104.2 and LTS version 0.103.5 and prior versions could allow an unauthenticated, remote attacker to cause a denial of service condition on an affected device. For a description of this vulnerability, see the ClamAV blog. This advisory will be updated as additional information becomes available.

A vulnerability in the Cisco Discovery Protocol functionality of Cisco ATA 190 Series Analog Telephone Adapter firmware could allow an unauthenticated, remote attacker to execute arbitrary code on an affected device and cause Cisco Discovery Protocol service to restart. This vulnerability is due to missing length validation of certain Cisco Discovery Protocol packet header fields. An attacker could exploit these vulnerabilities by sending a malicious Cisco Discovery Protocol packet to an affected device. A successful exploit could allow the attacker to execute code on the affected device and cause Cisco Discovery Protocol to restart unexpectedly, resulting in a DoS condition.

A vulnerability in the UDP processing functionality of Cisco IOS XE Software for Embedded Wireless Controllers on Catalyst 9100 Series Access Points could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition. This vulnerability is due to the improper processing of UDP datagrams. An attacker could exploit this vulnerability by sending malicious UDP datagrams to an affected device. A successful exploit could allow the attacker to cause the device to reload, resulting in a DoS condition.

A vulnerability in the implementation of the Border Gateway Protocol (BGP) Ethernet VPN (EVPN) functionality in Cisco IOS XR Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition. This vulnerability is due to the incorrect processing of a BGP update message that contains specific EVPN attributes. An attacker could exploit this vulnerability by sending a BGP update message that contains specific EVPN attributes. To exploit this vulnerability, an attacker must control a BGP speaker that has an established trusted peer connection to an affected device that is configured with the address family L2VPN EVPN to receive and process the update message. This vulnerability cannot be exploited by any data that is initiated by clients on the Layer 2 network or by peers that are not configured to accept the L2VPN EVPN address family. A successful exploit could allow the attacker to cause the BGP process to restart unexpectedly, resulting in a DoS condition. The Cisco implementation of BGP accepts incoming BGP updates only from explicitly defined peers. For this vulnerability to be exploited, the malicious BGP update message must either come from a configured, valid BGP peer or be injected by the attacker into the affected BGP network on an existing, valid TCP connection to a BGP peer.

A vulnerability in the syslog processing engine of Cisco Identity Services Engine (ISE) could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to a race condition that may occur when syslog messages are processed. An attacker could exploit this vulnerability by sending a high rate of syslog messages to an affected device. A successful exploit could allow the attacker to cause the Application Server process to crash, resulting in a DoS condition.

A vulnerability in the licensing service of Cisco Firepower Management Center (FMC) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition.The vulnerability is due to improper handling of system resource values by the affected system. An attacker could exploit this vulnerability by sending malicious requests to the targeted system. A successful exploit could allow the attacker to cause the affected system to become unresponsive, resulting in a DoS condition and preventing the management of dependent devices.

A vulnerability in Cisco Aironet Series Access Points Software could allow an unauthenticated, adjacent attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to the improper processing of client packets that are sent to an affected access point (AP). An attacker could exploit this vulnerability by sending a large number of sustained client packets to the affected AP. A successful exploit could allow the attacker to cause the affected AP to crash, resulting in a DoS condition.

A vulnerability in the ARP packet processing of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software for Cisco Firepower 2100 Series Security Appliances could allow an unauthenticated, adjacent attacker to cause an affected device to reload, resulting in a denial of service (DoS) condition on an affected device. The vulnerability is due to incorrect processing of ARP packets received by the management interface of an affected device. An attacker could exploit this vulnerability by sending a series of unicast ARP packets in a short timeframe that would reach the management interface of an affected device. A successful exploit could allow the attacker to consume resources on an affected device, which would prevent the device from sending internal system keepalives and eventually cause the device to reload, resulting in a denial of service (DoS) condition.

A vulnerability in the Control and Provisioning of Wireless Access Points (CAPWAP) protocol processing of Cisco IOS XE Software for Cisco Catalyst 9800 Series Wireless Controllers could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition of an affected device. The vulnerability is due to insufficient input validation during CAPWAP packet processing. An attacker could exploit this vulnerability by sending a crafted CAPWAP packet to an affected device, resulting in a buffer over-read. A successful exploit could allow the attacker to cause the affected device to crash and reload, resulting in a DoS condition on the affected device.

A vulnerability in the endpoint software of Cisco AMP for Endpoints and Clam AntiVirus could allow an authenticated, local attacker to cause the running software to delete arbitrary files on the system. The vulnerability is due to a race condition that could occur when scanning malicious files. An attacker with local shell access could exploit this vulnerability by executing a script that could trigger the race condition. A successful exploit could allow the attacker to delete arbitrary files on the system that the attacker would not normally have privileges to delete, producing system instability or causing the endpoint software to stop working.

A vulnerability in the Live Data server of Cisco Unified Contact Center Enterprise could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability exists because the affected software improperly manages resources when processing inbound Live Data traffic. An attacker could exploit this vulnerability by sending multiple crafted Live Data packets to an affected device. A successful exploit could cause the affected device to run out of buffer resources, which could result in a stack overflow and cause the affected device to reload, resulting in a DoS condition. Note: The Live Data port in Cisco Unified Contact Center Enterprise devices allows only a single TCP connection. To exploit this vulnerability, an attacker would have to send crafted packets to an affected device before a legitimate Live Data client establishes a connection.

A vulnerability in the Secure Login Enhancements capability of Cisco Nexus 1000V Switch for VMware vSphere could allow an unauthenticated, remote attacker to cause an affected Nexus 1000V Virtual Supervisor Module (VSM) to become inaccessible to users through the CLI. The vulnerability is due to improper resource allocation during failed CLI login attempts when login parameters that are part of the Secure Login Enhancements capability are configured on an affected device. An attacker could exploit this vulnerability by performing a high amount of login attempts against the affected device. A successful exploit could cause the affected device to become inaccessible to other users, resulting in a denial of service (DoS) condition requiring a manual power cycle of the VSM to recover.

A vulnerability in the Event Management Service daemon (emsd) of Cisco IOS XR routers could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on the affected device. The vulnerability is due to improper handling of gRPC requests. An attacker could exploit this vulnerability by repeatedly sending unauthenticated gRPC requests to the affected device. A successful exploit could allow the attacker to crash the device in such a manner that manual intervention is required to recover. This vulnerability affects all Cisco IOS XR platforms that are running release 6.1.1 of Cisco IOS XR Software when the gRPC service is enabled on the device. The gRPC service is not enabled by default. Cisco Bug IDs: CSCvb14441.

Cisco Unity 4.x before 4.2(1)ES161, 5.x before 5.0(1)ES53, and 7.x before 7.0(2)ES8, when using anonymous authentication (aka native Unity authentication), allows remote attackers to cause a denial of service (session exhaustion) via a large number of connections.

A vulnerability in the data plane microcode of Lightspeed-Plus line cards for Cisco ASR 9000 Series Aggregation Services Routers could allow an unauthenticated, remote attacker to cause the line card to reset. This vulnerability is due to the incorrect handling of malformed packets that are received on the Lightspeed-Plus line cards. An attacker could exploit this vulnerability by sending a crafted IPv4 or IPv6 packet through an affected device. A successful exploit could allow the attacker to cause the Lightspeed-Plus line card to reset, resulting in a denial of service (DoS) condition for any traffic that traverses that line card.

A vulnerability in the management web server of Cisco Firepower Threat Defense (FTD) Software could allow an authenticated, remote attacker with high privileges to execute configuration commands on an affected system. This vulnerability exists because access to HTTPS endpoints is not properly restricted on an affected device. An attacker could exploit this vulnerability by sending specific messages to the affected HTTPS handler. A successful exploit could allow the attacker to perform configuration changes on the affected system, which should be configured and managed only through Cisco Firepower Management Center (FMC) Software.

Multiple vulnerabilities in the Cisco IOx application hosting environment on multiple Cisco platforms could allow an attacker to inject arbitrary commands into the underlying host operating system, execute arbitrary code on the underlying host operating system, install applications without being authenticated, or conduct a cross-site scripting (XSS) attack against a user of the affected software. For more information about these vulnerabilities, see the Details section of this advisory.

A vulnerability in the Cisco Discovery Protocol functionality of Cisco ATA 190 Series Adaptive Telephone Adapter firmware could allow an unauthenticated, remote attacker to cause a DoS condition on an affected device. This vulnerability is due to an out-of-bounds read when processing Cisco Discovery Protocol packets. An attacker could exploit this vulnerability by sending crafted Cisco Discovery Protocol packets to an affected device. A successful exploit could allow the attacker to cause a service restart.Cisco has released firmware updates that address this vulnerability. There are no workarounds that address this vulnerability.

A vulnerability in the Snort rule evaluation function of Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to improper handling of the DNS reputation enforcement rule. An attacker could exploit this vulnerability by sending crafted UDP packets through an affected device to force a buildup of UDP connections. A successful exploit could allow the attacker to cause traffic that is going through the affected device to be dropped, resulting in a DoS condition. Note: This vulnerability only affects Cisco FTD devices that are running Snort 3.

A vulnerability in the Cisco Discovery Protocol service of Cisco FXOS Software and Cisco NX-OS Software could allow an unauthenticated, adjacent attacker to cause the service to restart, resulting in a denial of service (DoS) condition. This vulnerability is due to improper handling of Cisco Discovery Protocol messages that are processed by the Cisco Discovery Protocol service. An attacker could exploit this vulnerability by sending a series of malicious Cisco Discovery Protocol messages to an affected device. A successful exploit could allow the attacker to cause the Cisco Discovery Protocol service to fail and restart. In rare conditions, repeated failures of the process could occur, which could cause the entire device to restart.

A vulnerability in the rate limiter for Bidirectional Forwarding Detection (BFD) traffic of Cisco NX-OS Software for Cisco Nexus 9000 Series Switches could allow an unauthenticated, remote attacker to cause BFD traffic to be dropped on an affected device. This vulnerability is due to a logic error in the BFD rate limiter functionality. An attacker could exploit this vulnerability by sending a crafted stream of traffic through the device. A successful exploit could allow the attacker to cause BFD traffic to be dropped, resulting in BFD session flaps. BFD session flaps can cause route instability and dropped traffic, resulting in a denial of service (DoS) condition. This vulnerability applies to both IPv4 and IPv6 traffic.

A vulnerability in the remote access SSL VPN features of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to improper validation of errors that are logged as a result of client connections that are made using remote access VPN. An attacker could exploit this vulnerability by sending crafted requests to an affected system. A successful exploit could allow the attacker to cause the affected device to restart, resulting in a DoS condition.

Race condition in the IPv6 virtual fragmentation reassembly (VFR) implementation in Cisco IOS 12.2 through 12.4 and 15.0 through 15.3 allows remote attackers to cause a denial of service (device reload or hang) via fragmented IPv6 packets, aka Bug ID CSCud64812.

Memory leak in Cisco Adaptive Security Appliances (ASA) 5500 Series and PIX Security Appliances 8.0 before 8.0(4) and 8.1 before 8.1(2) allows remote attackers to cause a denial of service (memory consumption) via an unspecified sequence of packets, related to the "initialization code for the hardware crypto accelerator."

A vulnerability in the TCP stack of Cisco SocialMiner could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition in the notification system. The vulnerability is due to faulty handling of new TCP connections to the affected application. An attacker could exploit this vulnerability by sending a malicious TCP packet to the vulnerable service. An exploit could allow the attacker to create a DoS condition by interrupting certain phone services. A manual restart of the service may be required to restore full functionalities. Cisco Bug IDs: CSCvh48368.

Multiple vulnerabilities in the Application Layer Protocol Inspection feature of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to trigger a reload of an affected device, resulting in a denial of service (DoS) condition. The vulnerabilities are due to logical errors during traffic inspection. An attacker could exploit these vulnerabilities by sending a high volume of malicious traffic across an affected device. An exploit could allow the attacker to cause a deadlock condition, resulting in a reload of an affected device. These vulnerabilities affect Cisco ASA Software and Cisco FTD Software configured for Application Layer Protocol Inspection running on the following Cisco products: 3000 Series Industrial Security Appliance (ISA), ASA 5500 Series Adaptive Security Appliances, ASA 5500-X Series Next-Generation Firewalls, ASA Services Module for Cisco Catalyst 6500 Series Switches and Cisco 7600 Series Routers, Adaptive Security Virtual Appliance (ASAv), Firepower 2100 Series Security Appliance, Firepower 4100 Series Security Appliance, Firepower 9300 ASA Security Module, FTD Virtual (FTDv). Cisco Bug IDs: CSCve61540, CSCvh23085, CSCvh95456.

A vulnerability in the netconf interface of Cisco IOS XR Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on affected system. The vulnerability is due to improper handling of malformed requests processed by the netconf process. An attacker could exploit this vulnerability by sending malicious requests to the affected software. An exploit could allow the attacker to cause the targeted process to restart, resulting in a DoS condition on the affected system. Cisco Bug IDs: CSCvg95792.

Cisco Secure ACS 3.x before 3.3(4) Build 12 patch 7, 4.0.x, 4.1.x before 4.1(4) Build 13 Patch 11, and 4.2.x before 4.2(0) Build 124 Patch 4 does not properly handle an EAP Response packet in which the value of the length field exceeds the actual packet length, which allows remote authenticated users to cause a denial of service (CSRadius and CSAuth service crash) or possibly execute arbitrary code via a crafted RADIUS (1) EAP-Response/Identity, (2) EAP-Response/MD5, or (3) EAP-Response/TLS Message Attribute packet.

Memory leak in the crypto functionality in Cisco Adaptive Security Appliance (ASA) 5500 devices 7.2 before 7.2(4)2, 8.0 before 8.0(3)14, and 8.1 before 8.1(1)4, when configured as a clientless SSL VPN endpoint, allows remote attackers to cause a denial of service (memory consumption and VPN hang) via a crafted SSL or HTTP packet, aka Bug ID CSCso66472.

A vulnerability in the Session Initiation Protocol (SIP) ingress packet processing of Cisco Unified IP Phone software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition. The vulnerability is due to a lack of flow-control mechanisms in the software. An attacker could exploit this vulnerability by sending high volumes of SIP INVITE traffic to the targeted device. Successful exploitation could allow the attacker to cause a disruption of services on the targeted IP phone. Cisco Bug IDs: CSCve10064, CSCve14617, CSCve14638, CSCve14683, CSCve20812, CSCve20926, CSCve20945.

A vulnerability in the UDP broadcast forwarding function of Cisco IOS XR Software could allow an unauthenticated, adjacent attacker to cause a denial of service (DoS) condition on the affected device. The vulnerability is due to improper handling of UDP broadcast packets that are forwarded to an IPv4 helper address. An attacker could exploit this vulnerability by sending multiple UDP broadcast packets to the affected device. An exploit could allow the attacker to cause a buffer leak on the affected device, eventually resulting in a DoS condition requiring manual intervention to recover. This vulnerability affects all Cisco IOS XR platforms running 6.3.1, 6.2.3, or earlier releases of Cisco IOS XR Software when at least one IPv4 helper address is configured on an interface of the device. Cisco Bug IDs: CSCvi35625.

A vulnerability in the IPsec Manager of Cisco StarOS for Cisco Aggregation Services Router (ASR) 5000 Series Routers and Virtualized Packet Core (VPC) System Software could allow an unauthenticated, remote attacker to terminate all active IPsec VPN tunnels and prevent new tunnels from being established, resulting in a denial of service (DoS) condition. The vulnerability is due to improper processing of corrupted Internet Key Exchange Version 2 (IKEv2) messages. An attacker could exploit this vulnerability by sending crafted IKEv2 messages toward an affected router. A successful exploit could allow the attacker to cause the ipsecmgr service to reload. A reload of this service could cause all IPsec VPN tunnels to be terminated and prevent new tunnels from being established until the service has restarted, resulting in a DoS condition. This vulnerability affects the following Cisco products when they are running Cisco StarOS: Cisco Aggregation Services Router (ASR) 5000 Series Routers, Virtualized Packet Core (VPC) System Software. Cisco Bug IDs: CSCve29605.

A vulnerability in the Secure Sockets Layer (SSL) Engine of Cisco Firepower System Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition. The vulnerability is due to improper error handling while processing SSL traffic. An attacker could exploit this vulnerability by sending a large volume of crafted SSL traffic to the vulnerable device. A successful exploit could allow the attacker to degrade the device performance by triggering a persistent high CPU utilization condition. Cisco Bug IDs: CSCvh89340.

A vulnerability in the Control and Provisioning of Wireless Access Points (CAPWAP) protocol component of Cisco Wireless LAN Controller (WLC) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition. The vulnerability is due to improper input validation on fields within CAPWAP Discovery Request packets by the affected device. An attacker could exploit this vulnerability by sending malicious CAPWAP Discovery Request packets to the Cisco WLC Software. A successful exploit could allow the attacker to cause the Cisco WLC Software to disconnect associated access points (APs). While the APs disconnect and reconnect, service will be unavailable for a brief period of time, resulting in a DoS condition.

A vulnerability in the Forwarding Information Base (FIB) code of Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, network attacker to cause a denial of service (DoS) condition. The vulnerability is due to a limitation in the way the FIB is internally representing recursive routes. An attacker could exploit this vulnerability by injecting routes into the routing protocol that have a specific recursive pattern. The attacker must be in a position on the network that provides the ability to inject a number of recursive routes with a specific pattern. An exploit could allow the attacker to cause an affected device to reload, creating a DoS condition. Cisco Bug IDs: CSCva91655.

Cisco Adaptive Security Appliance (ASA) and Cisco PIX security appliance 7.2.x before 7.2(3)2 and 8.0.x before 8.0(2)17 allows remote attackers to cause a denial of service (device reload) via a port scan against TCP port 443 on the device.

Cisco Wireless LAN Controller (WLC) before 3.2.116.21, and 4.0.x before 4.0.155.0, allows remote attackers on a local network to cause a denial of service (device crash) via malformed Ethernet traffic.

The virtual private dial-up network (VPDN) component in Cisco IOS before 12.3 allows remote attackers to cause a denial of service (resource exhaustion) via a series of PPTP sessions, related to the persistence of interface descriptor block (IDB) data structures after process termination, aka bug ID CSCdv59309.

Race condition in the CIFS implementation in the rewriter module in the Clientless SSL VPN component on Cisco Adaptive Security Appliances (ASA) devices allows remote authenticated users to cause a denial of service (device reload) by accessing resources within multiple sessions, aka Bug ID CSCub58996.

Memory leak in the Certificate Trust List (CTL) Provider service in Cisco Unified Communications Manager (CUCM) 5.x before 5.1(3) allows remote attackers to cause a denial of service (memory consumption and service interruption) via a series of malformed TCP packets, as demonstrated by TCPFUZZ, aka Bug ID CSCsj80609.

Memory leak in the Certificate Trust List (CTL) Provider service in Cisco Unified Communications Manager (CUCM) 5.x before 5.1(3) and 6.x before 6.1(1) allows remote attackers to cause a denial of service (memory consumption and service interruption) via a series of malformed TCP packets, aka Bug ID CSCsi98433.

The data-link switching (DLSw) component in Cisco IOS 12.0 through 12.4 allows remote attackers to cause a denial of service (device restart or memory consumption) via crafted (1) UDP port 2067 or (2) IP protocol 91 packets.

A "Cisco Firepower Threat Defense 6.0.0 through 6.2.2 and Cisco ASA with FirePOWER Module Denial of Service" vulnerability in the access control policy of Cisco Firepower System Software could allow an authenticated, remote attacker to cause an affected system to stop inspecting and processing packets, resulting in a denial of service (DoS) condition. The vulnerability is due to improper SSL policy handling by the affected software when packets are passed through the sensing interfaces of an affected system. An attacker could exploit this vulnerability by sending crafted packets through a targeted system. This vulnerability affects Cisco Firepower System Software that is configured with the SSL policy feature. Cisco Bug IDs: CSCvc84361.

Cisco Sourcefire Snort 3.0 before build 233 has a Buffer Overread related to use of a decoder array. The size was off by one making it possible to read past the end of the array with an ether type of 0xFFFF. Increasing the array size solves this problem.

A vulnerability in the logging configuration of Secure Sockets Layer (SSL) policies for Cisco FirePOWER System Software 5.3.0 through 6.2.2 could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition due to high consumption of system resources. The vulnerability is due to the logging of certain TCP packets by the affected software. An attacker could exploit this vulnerability by sending a flood of crafted TCP packets to an affected device. A successful exploit could allow the attacker to cause a DoS condition. The success of an exploit is dependent on how an administrator has configured logging for SSL policies for a device. This vulnerability affects Cisco FirePOWER System Software that is configured to log connections by using SSL policy default actions. Cisco Bug IDs: CSCvd07072.

A vulnerability in the Secure Sockets Layer (SSL) and Transport Layer Security (TLS) code of Cisco ASA Software could allow an unauthenticated, remote attacker to cause a reload of the affected system. The vulnerability is due to improper parsing of crafted SSL or TLS packets. An attacker could exploit this vulnerability by sending a crafted packet to the affected system. Note: Only traffic directed to the affected system can be used to exploit this vulnerability. This vulnerability affects systems configured in routed and transparent firewall mode and in single or multiple context mode. This vulnerability can be triggered by IPv4 and IPv6 traffic. A valid SSL or TLS session is needed to exploit this vulnerability. This vulnerability affects Cisco ASA Software running on the following products: Cisco ASA 1000V Cloud Firewall, Cisco ASA 5500 Series Adaptive Security Appliances, Cisco ASA 5500-X Series Next-Generation Firewalls, Cisco ASA Services Module for Cisco Catalyst 6500 Series Switches and Cisco 7600 Series Routers, Cisco Adaptive Security Virtual Appliance (ASAv), Cisco Firepower 9300 ASA Security Module, Cisco ISA 3000 Industrial Security Appliance. Fixed versions: 8.4(7.31) 9.0(4.39) 9.1(7) 9.2(4.6) 9.3(3.8) 9.4(2) 9.5(2). Cisco Bug IDs: CSCuv48243.

A vulnerability in the TCP throttling process for Cisco IoT Field Network Director (IoT-FND) could allow an unauthenticated, remote attacker to cause the system to consume additional memory, eventually forcing the device to restart, aka Memory Exhaustion. The vulnerability is due to insufficient rate-limiting protection. An attacker could exploit this vulnerability by sending a high rate of TCP packets to a specific group of open listening ports on a targeted device. An exploit could allow the attacker to cause the system to consume additional memory. If enough available memory is consumed, the system will restart, creating a temporary denial of service (DoS) condition. The DoS condition will end after the device has finished the restart process. This vulnerability affects the following Cisco products: Connected Grid Network Management System, if running a software release prior to IoT-FND Release 4.0; IoT Field Network Director, if running a software release prior to IoT-FND Release 4.0. Cisco Bug IDs: CSCvc77164.