A vulnerability in the peer-to-peer message processing functionality of Cisco Packet Data Network Gateway could allow an unauthenticated, remote attacker to cause the Session Manager (SESSMGR) process on an affected device to restart, resulting in a denial of service (DoS) condition. The vulnerability is due to incorrect validation of peer-to-peer packet headers. An attacker could exploit this vulnerability by sending a crafted peer-to-peer packet through an affected device. A successful exploit could allow the attacker to cause the SESSMGR process on the affected device to restart unexpectedly, which could briefly impact traffic while the SESSMGR process restarts and result in a DoS condition. Cisco Bug IDs: CSCvg88786.
A vulnerability in the Border Gateway Protocol (BGP) implementation of Cisco NX-OS Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition due to the device unexpectedly reloading. The vulnerability is due to incomplete input validation of the BGP update messages. An attacker could exploit this vulnerability by sending a crafted BGP update message to the targeted device. An exploit could allow the attacker to cause the switch to reload unexpectedly. The Cisco implementation of the BGP protocol only accepts incoming BGP traffic from explicitly defined peers. To exploit this vulnerability, an attacker must be able to send the malicious packets over a TCP connection that appears to come from a trusted BGP peer or inject malformed messages into the victim's BGP network. This would require obtaining information about the BGP peers in the affected system's trusted network. The vulnerability may be triggered when the router receives a malformed BGP message from a peer on an existing BGP session. At least one BGP neighbor session must be established for a router to be vulnerable. This vulnerability affects Nexus 2000 Series Switches, Nexus 3000 Series Switches, Nexus 3500 Platform Switches, Nexus 3600 Platform Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Nexus 9000 Series Fabric Switches in Application Centric Infrastructure (ACI) mode, Nexus 9000 Series Switches in standalone NX-OS mode, Nexus 9500 R-Series Line Cards and Fabric Modules. Cisco Bug IDs: CSCve79599, CSCve87784, CSCve91371, CSCve91387.
Cisco ONS 15216 Optical Add/Drop Multiplexer (OADM) running firmware 2.2.2 and earlier allows remote attackers to cause a denial of service (management plane session loss) via crafted telnet data.
A vulnerability in the application server of the Cisco Unified Customer Voice Portal (CVP) could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on the affected device. The vulnerability is due to malformed SIP INVITE traffic received on the CVP during communications with the Cisco Virtualized Voice Browser (VVB). An attacker could exploit this vulnerability by sending malformed SIP INVITE traffic to the targeted appliance. An exploit could allow the attacker to impact the availability of services and data on the device, causing a DoS condition. This vulnerability affects Cisco Unified CVP running any software release prior to 11.6(1). Cisco Bug IDs: CSCve85840.
A vulnerability in the file descriptor handling of Cisco TelePresence Video Communication Server (VCS) Expressway could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition. The vulnerability is due to exhaustion of file descriptors while processing a high volume of traffic. An attacker could exploit this vulnerability by establishing a high number of concurrent TCP connections to the vulnerable system. An exploit could allow the attacker to cause a restart in a specific process, resulting in a temporary interruption of service. Cisco Bug IDs: CSCvh77056, CSCvh77058, CSCvh95264.
A vulnerability in management interface access control list (ACL) configuration of Cisco NX-OS System Software could allow an unauthenticated, remote attacker to bypass configured ACLs on the management interface. This could allow traffic to be forwarded to the NX-OS CPU for processing, leading to high CPU utilization and a denial of service (DoS) condition. The vulnerability is due to a bad code fix in the 7.3.2 code train that could allow traffic to the management interface to be misclassified and not match the proper configured ACLs. An attacker could exploit this vulnerability by sending crafted traffic to the management interface. An exploit could allow the attacker to bypass the configured management interface ACLs and impact the CPU of the targeted device, resulting in a DoS condition. This vulnerability affects the following Cisco products running Cisco NX-OS System Software: Multilayer Director Switches, Nexus 2000 Series Switches, Nexus 3000 Series Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Nexus 9000 Series Switches in standalone NX-OS mode. Cisco Bug IDs: CSCvf31132.
Cisco Security Agent (CSA) 4.5 allows remote attackers to cause a denial of service (system crash) via a crafted IP packet.
A vulnerability in the Server Message Block Version 2 (SMBv2) and Version 3 (SMBv3) protocol implementation for the Cisco Firepower System Software could allow an unauthenticated, remote attacker to cause the device to run low on system memory, possibly preventing the device from forwarding traffic. It is also possible that a manual reload of the device may be required to clear the condition. The vulnerability is due to incorrect SMB header validation. An attacker could exploit this vulnerability by sending a custom SMB file transfer through the targeted device. A successful exploit could cause the device to consume an excessive amount of system memory and prevent the SNORT process from forwarding network traffic. This vulnerability can be exploited using either IPv4 or IPv6 in combination with SMBv2 or SMBv3 network traffic.
The cat6000-dot1x component in Cisco IOS 12.2 before 12.2(33)SXI7 does not properly handle (1) a loop between a dot1x enabled port and an open-authentication dot1x enabled port and (2) a loop between a dot1x enabled port and a non-dot1x port, which allows remote attackers to cause a denial of service (traffic storm) via unspecified vectors that trigger many Spanning Tree Protocol (STP) Bridge Protocol Data Unit (BPDU) frames, aka Bug ID CSCtq36327.
A vulnerability in the DHCPv6 feature of the Cisco Nexus 9000 Series Fabric Switches in Application-Centric Infrastructure (ACI) Mode could allow an unauthenticated, remote attacker to cause the device to run low on system memory, which could result in a Denial of Service (DoS) condition on an affected system. The vulnerability is due to improper memory management when DHCPv6 packets are received on an interface of the targeted device. An attacker could exploit this vulnerability by sending a high number of malicious DHCPv6 packets to be processed by an affected device. A successful exploit could allow the attacker to cause the system to run low on memory, which could cause an eventual reboot of an affected device. The vulnerability only applies to IPv6 protocol packets and not for IPv4 protocol packets. This vulnerability affects Cisco Nexus 9000 Series Fabric Switches in ACI Mode running software version 13.0(1k). The vulnerability can only be exploited when unicast routing is enabled on the Bridge Domain (BD). DHCP and DHCP relay do not have to be configured for the vulnerability to be exploited. Cisco Bug IDs: CSCvg38918.
A vulnerability in the Session Initiation Protocol (SIP) call-handling functionality of Cisco IP Phone 7800 Series phones and Cisco IP Phone 8800 Series phones could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected phone. The vulnerability is due to incomplete input validation of SIP Session Description Protocol (SDP) parameters by the SDP parser of an affected phone. An attacker could exploit this vulnerability by sending a malformed SIP packet to an affected phone. A successful exploit could allow the attacker to cause all active phone calls on the affected phone to be dropped while the SIP process on the phone unexpectedly restarts, resulting in a DoS condition. Cisco Bug IDs: CSCvf40066.
A vulnerability in the Cisco Fabric Services component of Cisco FXOS Software and Cisco NX-OS Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on the affected device. The vulnerability exists because the affected software insufficiently validates Cisco Fabric Services packets. An attacker could exploit this vulnerability by sending a crafted Cisco Fabric Services packet to an affected device. A successful exploit could allow the attacker to force a NULL pointer dereference and cause a DoS condition. This vulnerability affects the following if configured to use Cisco Fabric Services: Firepower 4100 Series Next-Generation Firewalls, Firepower 9300 Security Appliance, MDS 9000 Series Multilayer Switches, Nexus 2000 Series Fabric Extenders, Nexus 3000 Series Switches, Nexus 3500 Platform Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Nexus 9000 Series Switches in standalone NX-OS mode, Nexus 9500 R-Series Line Cards and Fabric Modules, UCS 6100 Series Fabric Interconnects, UCS 6200 Series Fabric Interconnects, UCS 6300 Series Fabric Interconnects. Cisco Bug IDs: CSCvd69966, CSCve02435, CSCve04859, CSCve41590, CSCve41593, CSCve41601.
A vulnerability in the Control and Provisioning of Wireless Access Points (CAPWAP) protocol component of Cisco Wireless LAN Controller (WLC) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition. The vulnerability is due to improper input validation on fields within CAPWAP Discovery Request packets by the affected device. An attacker could exploit this vulnerability by sending malicious CAPWAP Discovery Request packets to the Cisco WLC Software. A successful exploit could allow the attacker to cause the Cisco WLC Software to disconnect associated access points (APs). While the APs disconnect and reconnect, service will be unavailable for a brief period of time, resulting in a DoS condition.
A vulnerability in the Precision Time Protocol (PTP) subsystem of Cisco IOS Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition of the Precision Time Protocol. The vulnerability is due to insufficient processing of PTP packets. An attacker could exploit this vulnerability by sending a custom PTP packet to, or through, an affected device. A successful exploit could allow the attacker to cause a DoS condition for the PTP subsystem, resulting in time synchronization issues across the network.
A vulnerability in IPv6 ingress packet processing for Cisco UCS Central Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition due to high CPU utilization on the targeted device. The vulnerability is due to insufficient rate limiting protection for IPv6 ingress traffic. An attacker could exploit this vulnerability by sending the affected device a high rate of IPv6 packets. Successful exploitation could allow the attacker to cause a DoS condition due to CPU and resource constraints. Cisco Bug IDs: CSCuv34544.
A vulnerability in the XCP Router service of the Cisco Unified Communications Manager IM & Presence Service (CUCM IM&P) and the Cisco TelePresence Video Communication Server (VCS) and Expressway could allow an unauthenticated, remote attacker to cause a temporary service outage for all IM&P users, resulting in a denial of service (DoS) condition. The vulnerability is due to improper validation of user-supplied input. An attacker could exploit this vulnerability by sending a malicious IPv4 or IPv6 packet to an affected device on TCP port 7400. An exploit could allow the attacker to overread a buffer, resulting in a crash and restart of the XCP Router service. Cisco Bug IDs: CSCvg97663, CSCvi55947.
A vulnerability in the SSH service of the Cisco StarOS operating system could allow an unauthenticated, remote attacker to cause an affected device to stop processing traffic, resulting in a denial of service (DoS) condition. The vulnerability is due to a logic error that may occur under specific traffic conditions. An attacker could exploit this vulnerability by sending a series of crafted packets to an affected device. A successful exploit could allow the attacker to prevent the targeted service from receiving any traffic, which would lead to a DoS condition on the affected device.
Cisco devices running Application and Content Networking System (ACNS) 5.0 before 5.0.17.6 and 5.1 before 5.1.11.6 allow remote attackers to cause a denial of service (process restart) via a "crafted TCP connection."
The voice-sipstack component in Cisco Unified Communications Manager (CUCM) 8.5 allows remote attackers to cause a denial of service (core dump) via vectors involving SIP messages that arrive after an upgrade, aka Bug ID CSCtj87367.
Cisco devices running Application and Content Networking System (ACNS) 4.x, 5.0, or 5.1 before 5.1.11.6 allow remote attackers to cause a denial of service (CPU consumption) via malformed IP packets.
Memory leak in Cisco IOS before 15.1(1)SY, when IKEv2 debugging is enabled, allows remote attackers to cause a denial of service (memory consumption) via crafted packets, aka Bug ID CSCtn22376.
Cisco devices running Application and Content Networking System (ACNS) 5.0, 5.1 before 5.1.13.7, or 5.2 before 5.2.3.9 allow remote attackers to cause a denial of service (bandwidth consumption) via "crafted IP packets" that are continuously forwarded.
The RealServer RealSubscriber on Cisco devices running Application and Content Networking System (ACNS) 5.1 allow remote attackers to cause a denial of service (CPU consumption) via malformed packets.
A vulnerability in the OSPF Version 2 (OSPFv2) implementation of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause an affected device to reload, resulting in a denial of service (DoS) condition. The vulnerability is due to incomplete input validation when the affected software processes certain OSPFv2 packets with Link-Local Signaling (LLS) data. An attacker could exploit this vulnerability by sending a malformed OSPFv2 packet to an affected device. A successful exploit could allow the attacker to cause an affected device to reload, resulting in a DoS condition.
Multiple TCP implementations with Protection Against Wrapped Sequence Numbers (PAWS) with the timestamps option enabled allow remote attackers to cause a denial of service (connection loss) via a spoofed packet with a large timer value, which causes the host to discard later packets because they appear to be too old.
A vulnerability in the Control and Provisioning of Wireless Access Points (CAPWAP) protocol handler of Cisco Wireless LAN Controller (WLC) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to insufficient validation of CAPWAP packets. An attacker could exploit this vulnerability by sending a malformed CAPWAP packet to an affected device. A successful exploit could allow the attacker to cause the affected device to restart, resulting in a DoS condition.
Cisco IOS 12.1YD, 12.2T, 12.3 and 12.3T, when configured for the IOS Telephony Service (ITS), CallManager Express (CME) or Survivable Remote Site Telephony (SRST), allows remote attackers to cause a denial of service (device reboot) via a malformed packet to the SCCP port.
A vulnerability in the Secure Sockets Layer (SSL)/Transport Layer Security (TLS) handler of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to exhaust memory resources on the affected device, leading to a denial of service (DoS) condition. The vulnerability is due to improper resource management for inbound SSL/TLS connections. An attacker could exploit this vulnerability by establishing multiple SSL/TLS connections with specific conditions to the affected device. A successful exploit could allow the attacker to exhaust the memory on the affected device, causing the device to stop accepting new SSL/TLS connections and resulting in a DoS condition for services on the device that process SSL/TLS traffic. Manual intervention is required to recover an affected device.
Multiple versions of Cisco ONS 15327, ONS 15454, and ONS 15454 SDH, including 4.6(0) and 4.6(1), 4.5(x), 4.1(0) to 4.1(3), 4.0(0) to 4.0(2), and earlier versions, and ONS 15600 1.x(x), allows remote attackers to cause a denial of service (control card reset) via malformed (1) TCP and (2) UDP packets.
Cisco IOS 12.2(15) and earlier allows remote attackers to cause a denial of service (refused VTY (virtual terminal) connections), via a crafted TCP connection to the Telnet or reverse Telnet port.
Cisco IOS 15.2S allows remote attackers to cause a denial of service (interface queue wedge) via malformed UDP traffic on port 465, aka Bug ID CSCts48300.
The CSAdmin web administration interface for Cisco Secure Access Control Server (ACS) 3.2(2) build 15 allows remote attackers to cause a denial of service (hang) via a flood of TCP connections to port 2002.
A vulnerability in the IPv6 packet processing engine of Cisco Small Business Smart and Managed Switches could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to insufficient validation of incoming IPv6 traffic. An attacker could exploit this vulnerability by sending a crafted IPv6 packet through an affected device. A successful exploit could allow the attacker to cause the switch management CLI to stop responding, resulting in a DoS condition. This vulnerability is specific to IPv6 traffic. IPv4 traffic is not affected.
Cisco Carrier Routing System 3.9.1 allows remote attackers to cause a denial of service (Metro subsystem crash) via a fragmented GRE packet, aka Bug ID CSCts14887.
Multiple versions of Cisco ONS 15327, ONS 15454, and ONS 15454 SDH, including 4.6(0) and 4.6(1), 4.5(x), 4.1(0) to 4.1(3), 4.0(0) to 4.0(2), and earlier versions, allows remote attackers to cause a denial of service (control card reset) via a large number of TCP connections with an invalid response instead of the final ACK (TCP-ACK).
Cisco voice products, when running the IBM Director Agent on IBM servers before OS 2000.2.6, allows remote attackers to cause a denial of service (CPU consumption) via arbitrary packets to TCP port 14247, as demonstrated using port scanning.
Multiple versions of Cisco ONS 15327, ONS 15454, and ONS 15454 SDH, including 4.1(0) to 4.1(2), 4.5(x), 4.0(0) to 4.0(2), and earlier versions, allows remote attackers to cause a denial of service (control card reset) via malformed SNMP packets.
IP Security VPN Services Module (VPNSM) in Cisco Catalyst 6500 Series Switch and the Cisco 7600 Series Internet Routers running IOS before 12.2(17b)SXA, before 12.2(17d)SXB, or before 12.2(14)SY03 could allow remote attackers to cause a denial of service (device crash and reload) via a malformed Internet Key Exchange (IKE) packet.
The lock manager in Cisco CNS Network Registrar 6.0 through 6.1.1.3 allows remote attackers to cause a denial of service (process crash) via a certain "unexpected packet sequence."
A vulnerability in the TCP throttling process for the GUI of the Cisco Identity Services Engine (ISE) 2.1(0.474) could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device where the ISE GUI may fail to respond to new or established connection requests. The vulnerability is due to insufficient TCP rate limiting protection on the GUI. An attacker could exploit this vulnerability by sending the affected device a high rate of TCP connections to the GUI. An exploit could allow the attacker to cause the GUI to stop responding while the high rate of connections is in progress. Cisco Bug IDs: CSCvc81803.
A vulnerability in the implementation of the H.264 protocol in Cisco Meeting Server (CMS) 2.1.4 could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected system. The vulnerability exists because the affected application does not properly validate Fragmentation Unit (FU-A) protocol packets. An attacker could exploit this vulnerability by sending a crafted H.264 FU-A packet through the affected application. A successful exploit could allow the attacker to cause a DoS condition on the affected system due to an unexpected restart of the CMS media process on the system. Although the CMS platform continues to operate and only the single, affected CMS media process is restarted, a brief interruption of media traffic for certain users could occur. Cisco Bug IDs: CSCve10131.
Cisco CatOS 5.x before 5.5(20) through 8.x before 8.2(2) and 8.3(2)GLX, as used in Catalyst switches, allows remote attackers to cause a denial of service (system crash and reload) by sending invalid packets instead of the final ACK portion of the three-way handshake to the (1) Telnet, (2) HTTP, or (3) SSH services, aka "TCP-ACK DoS attack."
A vulnerability in the ingress processing of fragmented TCP packets by Cisco Wide Area Application Services (WAAS) could allow an unauthenticated, remote attacker to cause the WAASNET process to restart unexpectedly, causing a denial of service (DoS) condition. More Information: CSCvc57428. Known Affected Releases: 6.3(1). Known Fixed Releases: 6.3(0.143) 6.2(3c)6 6.2(3.22).
A vulnerability in the Server Message Block (SMB) protocol of Cisco Wide Area Application Services (WAAS) could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device due to a process restarting unexpectedly and creating Core Dump files. More Information: CSCvc63035. Known Affected Releases: 6.2(3a). Known Fixed Releases: 6.3(0.167) 6.2(3c)5 6.2(3.22).
A vulnerability in the UDP processing code of Cisco IOS 15.1, 15.2, and 15.4 and IOS XE 3.14 through 3.18 could allow an unauthenticated, remote attacker to cause the input queue of an affected system to hold UDP packets, causing an interface queue wedge and a denial of service (DoS) condition. The vulnerability is due to Cisco IOS Software application changes that create UDP sockets and leave the sockets idle without closing them. An attacker could exploit this vulnerability by sending UDP packets with a destination port of 0 to an affected device. A successful exploit could allow the attacker to cause UDP packets to be held in the input interfaces queue, resulting in a DoS condition. The input interface queue will stop holding UDP packets when it receives 250 packets. Cisco Bug IDs: CSCup10024, CSCva55744, CSCva95506.
A vulnerability in the ingress UDP packet processing functionality of Cisco Virtualized Packet Core-Distributed Instance (VPC-DI) Software 19.2 through 21.0 could allow an unauthenticated, remote attacker to cause both control function (CF) instances on an affected system to reload, resulting in a denial of service (DoS) condition. The vulnerability is due to insufficient handling of user-supplied data by the affected software. An attacker could exploit this vulnerability by sending crafted UDP packets to the distributed instance (DI) network addresses of both CF instances on an affected system. A successful exploit could allow the attacker to cause an unhandled error condition on the affected system, which would cause the CF instances to reload and consequently cause the entire VPC to reload, resulting in the disconnection of all subscribers and a DoS condition on the affected system. This vulnerability can be exploited via IPv4 traffic only. Cisco Bug IDs: CSCvc01665 CSCvc35565.
A vulnerability in the TCP throttling process for Cisco IoT Field Network Director (IoT-FND) could allow an unauthenticated, remote attacker to cause the system to consume additional memory, eventually forcing the device to restart, aka Memory Exhaustion. The vulnerability is due to insufficient rate-limiting protection. An attacker could exploit this vulnerability by sending a high rate of TCP packets to a specific group of open listening ports on a targeted device. An exploit could allow the attacker to cause the system to consume additional memory. If enough available memory is consumed, the system will restart, creating a temporary denial of service (DoS) condition. The DoS condition will end after the device has finished the restart process. This vulnerability affects the following Cisco products: Connected Grid Network Management System, if running a software release prior to IoT-FND Release 4.0; IoT Field Network Director, if running a software release prior to IoT-FND Release 4.0. Cisco Bug IDs: CSCvc77164.
Cisco Sourcefire Snort 3.0 before build 233 has a Buffer Overread related to use of a decoder array. The size was off by one making it possible to read past the end of the array with an ether type of 0xFFFF. Increasing the array size solves this problem.
A vulnerability in the Session Initiation Protocol (SIP) of the Cisco TelePresence Codec (TC) and Collaboration Endpoint (CE) Software could allow an unauthenticated, remote attacker to cause a TelePresence endpoint to reload unexpectedly, resulting in a denial of service (DoS) condition. The vulnerability is due to a lack of flow-control mechanisms within the software. An attacker could exploit this vulnerability by sending a flood of SIP INVITE packets to the affected device. An exploit could allow the attacker to impact the availability of services and data of the device, including a complete DoS condition. This vulnerability affects the following Cisco TC and CE platforms when running software versions prior to TC 7.3.8 and CE 8.3.0. Cisco Bug IDs: CSCux94002.
A vulnerability in the HTTP remote procedure call (RPC) service of set-top box (STB) receivers manufactured by Cisco for Yes could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability exists because the firmware of an affected device fails to handle certain XML values that are passed to the HTTP RPC service listening on the local subnet of the device. An attacker could exploit this vulnerability by submitting a malformed request to an affected device. A successful attack could cause the affected device to restart, resulting in a DoS condition. Yes has updated the affected devices with firmware that addresses this vulnerability. Customers are not required to take action. Vulnerable Products: This vulnerability affects YesMaxTotal, YesMax HD, and YesQuattro STB devices. Cisco Bug IDs: CSCvd08812.