Stack-based buffer overflow in the Broadcom BCMWL5.SYS wireless device driver 3.50.21.10, as used in Cisco Linksys WPC300N Wireless-N Notebook Adapter before 4.100.15.5 and other products, allows remote attackers to execute arbitrary code via an 802.11 response frame containing a long SSID field.

Broadcom firmware before summer 2014 on Nexus 5 BCM4335C0 2012-12-11, Raspberry Pi 3 BCM43438A1 2014-06-02, and unspecifed other devices does not properly restrict LMP commnds and executes certain memory contents upon receiving an LMP command, as demonstrated by executing an HCI command.

The Broadcom wl WiFi driver is vulnerable to a heap buffer overflow. If the vendor information element data length is larger than 164 bytes, a heap buffer overflow is triggered in wlc_wpa_plumb_gtk. In the worst case scenario, by sending specially-crafted WiFi packets, a remote, unauthenticated attacker may be able to execute arbitrary code on a vulnerable system. More typically, this vulnerability will result in denial-of-service conditions.

The Broadcom wl WiFi driver is vulnerable to a heap buffer overflow. By supplying a vendor information element with a data length larger than 32 bytes, a heap buffer overflow is triggered in wlc_wpa_sup_eapol. In the worst case scenario, by sending specially-crafted WiFi packets, a remote, unauthenticated attacker may be able to execute arbitrary code on a vulnerable system. More typically, this vulnerability will result in denial-of-service conditions.

Icihttp.exe in CA Gateway Security for HTTP, as used in CA Gateway Security 8.1 before 8.1.0.69 and CA Total Defense r12, does not properly parse URLs, which allows remote attackers to execute arbitrary code or cause a denial of service (heap memory corruption and daemon crash) via a malformed request.

A buffer overflow vulnerability exists in Symantec Server Management Suite version 7.9 and before. A remote, anonymous attacker can exploit this vulnerability to achieve remote code execution as SYSTEM.

A buffer overflow vulnerability exists in Symantec Messaging Gateway versions 9.5 and before. A remote, anonymous attacker can exploit this vulnerability to achieve remote code execution as root.

A buffer overflow vulnerability exists in Symantec Deployment Solution version 7.9 when parsing UpdateComputer tokens. A remote, anonymous attacker can exploit this vulnerability to achieve remote code execution as SYSTEM.

A buffer overflow vulnerability exists in Symantec Data Loss Prevention version 14.0.2 and before. A remote, unauthenticated attacker can exploit this vulnerability by enticing a user to open a crafted document to achieve code execution.

A buffer overflow vulnerability exists in Symantec Messaging Gateway versions 10.5 and before. A remote, anonymous attacker can exploit this vulnerability to achieve remote code execution as root.

Buffer overflow in the LGServer service in CA ARCserve Backup for Laptops and Desktops r11.0 through r11.5, and Suite 11.1 and 11.2, allows remote attackers to execute arbitrary code via unspecified "command arguments."

Buffer overflow in the tcpcapinfo utility in Tcpreplay before 4.2.0 Beta 1 allows remote attackers to have unspecified impact via a pcap file with an over-size packet.

Stack-based buffer overflow in the firmware in Broadcom Wi-Fi HardMAC SoC chips, when the firmware supports CCKM Fast and Secure Roaming and the feature is enabled in RAM, allows remote attackers to execute arbitrary code via a crafted reassociation response frame with a Cisco IE (156).

Multiple buffer overflows in xdr functions in the server in CA BrightStor ARCServe Backup 11.0, 11.1, and 11.5 allow remote attackers to execute arbitrary code, as demonstrated by a stack-based buffer overflow via a long parameter to the xdr_rwsstring function.

Multiple buffer overflows in (1) RPC and (2) rpcx.dll in CA BrightStor ARCServe BackUp v9.01 through R11.5, and Enterprise Backup r10.5, allow remote attackers to execute arbitrary code via unspecified vectors.

Multiple integer overflows in Computer Associates (CA) BrightStor Hierarchical Storage Manager (HSM) before r11.6 allow remote attackers to execute arbitrary code via unspecified CsAgent service commands that trigger a heap-based buffer overflow.

Multiple stack-based buffer overflows in CA (Computer Associates) BrightStor ARCserve Backup for Laptops and Desktops r11.0 through r11.5 allow remote attackers to execute arbitrary code via a long (1) username or (2) password to the rxrLogin command in rxRPC.dll, or a long (3) username argument to the GetUserInfo function.

Multiple buffer overflows in (1) the Message Engine and (2) AScore.dll in CA BrightStor ARCServe BackUp v9.01 through R11.5, and Enterprise Backup r10.5, allow remote attackers to execute arbitrary code via unspecified vectors.

The cadbd RPC service in CA BrightStor ARCServe BackUp v9.01 through R11.5, and Enterprise Backup r10.5, allows remote attackers to (1) execute arbitrary code via stack-based buffer overflows in unspecified RPC procedures, and (2) trigger memory corruption related to the use of "handle" RPC arguments as pointers.

Stack-based buffer overflow in the RPC interface for the Message Engine (mediasvr.exe) in CA BrightStor ARCServe BackUp v9.01 through R11.5, and Enterprise Backup r10.5, allows remote attackers to execute arbitrary code via a long argument in the 0x10d opnum.

Multiple stack-based buffer overflows in Computer Associates (CA) BrightStor Hierarchical Storage Manager (HSM) before r11.6 allow remote attackers to execute arbitrary code via unspecified CsAgent service commands with certain opcodes, related to missing validation of a length parameter.

Multiple stack-based buffer overflows in Computer Associates (CA) Alert Notification Service (Alert.exe) 8.1.586.0, 8.0.450.0, and 7.1.758.0, as used in multiple CA products including Anti-Virus for the Enterprise 7.1 through r11.1 and Threat Manager for the Enterprise 8.1 and r8, allow remote authenticated users to execute arbitrary code via crafted RPC requests.

Multiple buffer overflows in the LGServer component of CA (Computer Associates) BrightStor ARCserve Backup for Laptops and Desktops r11.1 allow remote attackers to execute arbitrary code via crafted arguments to the (1) rxsAddNewUser, (2) rxsSetUserInfo, (3) rxsRenameUser, (4) rxsSetMessageLogSettings, (5) rxsExportData, (6) rxsSetServerOptions, (7) rxsRenameFile, (8) rxsACIManageSend, (9) rxsExportUser, (10) rxsImportUser, (11) rxsMoveUserData, (12) rxsUseLicenseIni, (13) rxsLicGetSiteId, (14) rxsGetLogFileNames, (15) rxsGetBackupLog, (16) rxsBackupComplete, (17) rxsSetDataProtectionSecurityData, (18) rxsSetDefaultConfigName, (19) rxsGetMessageLogSettings, (20) rxsHWDiskGetTotal, (21) rxsHWDiskGetFree, (22) rxsGetSubDirs, (23) rxsGetServerDBPathName, (24) rxsSetServerOptions, (25) rxsDeleteFile, (26) rxsACIManageSend, (27) rxcReadBackupSetList, (28) rxcWriteConfigInfo, (29) rxcSetAssetManagement, (30) rxcWriteFileListForRestore, (31) rxcReadSaveSetProfile, (32) rxcInitSaveSetProfile, (33) rxcAddSaveSetNextAppList, (34) rxcAddSaveSetNextFilesPathList, (35) rxcAddNextBackupSetIncWildCard, (36) rxcGetRevisions, (37) rxrAddMovedUser, (38) rxrSetClientVersion, or (39) rxsSetDataGrowthScheduleAndFilter commands.

Stack-based buffer overflow in the inoweb Console Server in CA Anti-Virus for the Enterprise r8, Threat Manager r8, Anti-Spyware for the Enterprise r8, and Protection Suites r3 allows remote attackers to execute arbitrary code via a long (1) username or (2) password.

Multiple buffer overflows in LGSERVER.EXE in CA BrightStor ARCserve Backup for Laptops and Desktops r11.0 through r11.1 SP1, Mobile Backup r4.0, Desktop and Business Protection Suite r2, and Desktop Management Suite (DMS) r11.0 and r11.1 allow remote attackers to execute arbitrary code via crafted packets to TCP port (1) 1900 or (2) 2200.

LGSERVER.EXE in BrightStor ARCserve Backup for Laptops & Desktops r11.1 allows remote attackers to cause a denial of service (daemon crash) via a value of 0xFFFFFFFF at a certain point in an authentication negotiation packet, which results in an out-of-bounds read.

Multiple buffer overflows in Computer Associates (CA) BrightStor ARCserve Backup 9.01 through 11.5, Enterprise Backup 10.5, and CA Server/Business Protection Suite r2 allow remote attackers to execute arbitrary code via RPC requests with crafted data for opnums (1) 0x2F and (2) 0x75 in the (a) Message Engine RPC service, or opnum (3) 0xCF in the Tape Engine service.

Multiple buffer overflows in CA BrightStor ARCserve Backup r11.5 SP1 and earlier, r11.1, and 9.01; BrightStor ARCserve Backup for Windows r11; BrightStor Enterprise Backup 10.5; Server Protection Suite r2; and Business Protection Suite r2 allow remote attackers to execute arbitrary code via crafted data on TCP port 6071 to the Backup Agent RPC Server (DBASVR.exe) using the RPC routines with opcode (1) 0x01, (2) 0x02, or (3) 0x18; invalid stub data on TCP port 6503 to the RPC routines with opcode (4) 0x2b or (5) 0x2d in ASCORE.dll in the Message Engine RPC Server (msgeng.exe); (6) a long hostname on TCP port 41523 to ASBRDCST.DLL in the Discovery Service (casdscsvc.exe); or unspecified vectors related to the (7) Job Engine Service.

Stack-based buffer overflow in CA BrightStor ARCserve Backup R11.5 client and server allows remote attackers to execute arbitrary code via long messages to the CheyenneDS Mailslot.

Heap-based buffer overflow in the iGateway service for various Computer Associates (CA) iTechnology products, in iTechnology iGateway before 4.0.051230, allows remote attackers to execute arbitrary code via an HTTP request with a negative Content-Length field.

Multiple buffer overflow vulnerabilities in REST API in Brocade Fabric OS versions v8.2.1 through v8.2.1d, and 8.2.2 versions before v8.2.2c could allow remote unauthenticated attackers to perform various attacks.

An issue was discovered in Tcpreplay 4.3.1. An invalid memory access occurs in do_checksum in checksum.c. It can be triggered by sending a crafted pcap file to the tcpreplay-edit binary. It allows an attacker to cause a Denial of Service (Segmentation fault) or possibly have unspecified other impact.

Multiple stack-based buffer overflows in the Web Viewer ActiveX controls in CA Output Management Web Viewer 11.0 and 11.5 allow remote attackers to execute arbitrary code via (1) a long SRC property value to the PPSViewer ActiveX control in PPSView.ocx before 1.0.0.7 or (2) a long Title property value to the UOMWV_Helper ActiveX control in UOMWV_HelperActiveX.ocx before 11.5.0.1.

tcprewrite in Tcpreplay 3.4.4 has a Heap-Based Buffer Overflow vulnerability triggered by a crafted PCAP file, a related issue to CVE-2016-6160.

On Broadcom BCM4355C0 Wi-Fi chips 9.44.78.27.0.1.56 and other chips, properly crafted malicious over-the-air Fast Transition frames can potentially trigger internal Wi-Fi firmware heap and/or stack overflows, leading to denial of service or other effects, aka B-V2017061205.

On Broadcom BCM4355C0 Wi-Fi chips 9.44.78.27.0.1.56 and other chips, an attacker can craft a malformed RRM neighbor report frame to trigger an internal buffer overflow in the Wi-Fi firmware, aka B-V2017061204.

Buffer overflow in the SigComp Universal Decompressor Virtual Machine dissector in Wireshark 0.10.8 through 1.0.13 and 1.2.0 through 1.2.8 has unknown impact and remote attack vectors.

Buffer overflow in the PPP Access Concentrator (PPPAC) on the SEIL/x86 with firmware 1.00 through 1.61, SEIL/B1 with firmware 1.00 through 3.11, SEIL/X1 with firmware 1.00 through 3.11, SEIL/X2 with firmware 1.00 through 3.11, SEIL/Turbo with firmware 1.80 through 2.10, and SEIL/neu 2FE Plus with firmware 1.80 through 2.10 might allow remote attackers to execute arbitrary code via a PPPoE packet.

Buffer overflow in btif/src/btif_dm.c in Bluetooth in Android 4.x before 4.4.4, 5.0.x before 5.0.2, 5.1.x before 5.1.1, and 6.x before 2016-05-01 allows remote attackers to execute arbitrary code via a long PIN value, aka internal bug 27411268.

While parsing over-the-air information elements in all Android releases from CAF using the Linux kernel (Android for MSM, Firefox OS for MSM, QRD Android) before security patch level 2018-07-05, the use of an out-of-range pointer offset can occur.

Buffer overflow in the ASN.1 BER dissector in Wireshark 0.10.13 through 1.0.13 and 1.2.0 through 1.2.8 has unknown impact and remote attack vectors.

Improper validation of buffer length checks in the lwm2m device management protocol can leads to a buffer overflow in snapdragon mobile and snapdragon wear in versions MDM9206, MDM9607, SD 210/SD 212/SD 205, SD 425, SD 427, SD 430, SD 435, SD 450, SD 625, SD 636, SD 835, SDA660, SDM630, SDM660

In Open vSwitch (OvS) 2.5.0, a malformed IP packet can cause the switch to read past the end of the packet buffer due to an unsigned integer underflow in `lib/flow.c` in the function `miniflow_extract`, permitting remote bypass of the access control list enforced by the switch.

Buffer overflow in HTTP handler in Intel Active Management Technology in Intel Converged Security Manageability Engine Firmware 3.x, 4.x, 5.x, 6.x, 7.x, 8.x, 9.x, 10.x, and 11.x may allow an attacker to execute arbitrary code via the same subnet.

A vulnerability was found in D-Link DI-8100 up to 20250523. It has been classified as critical. Affected is the function httpd_get_parm of the file /login.cgi of the component jhttpd. The manipulation of the argument notify leads to stack-based buffer overflow. The attack can only be initiated within the local network. The exploit has been disclosed to the public and may be used.

DeltaV Versions 11.3.1, 12.3.1, 13.3.0, 13.3.1, and R5 is vulnerable to a buffer overflow exploit through an open communication port to allow arbitrary code execution.

A vulnerability was found in D-Link DI-8100 16.07.26A1. It has been rated as critical. This issue affects the function auth_asp of the file /auth.asp of the component jhttpd. The manipulation of the argument callback leads to stack-based buffer overflow. The attack needs to be approached within the local network. The exploit has been disclosed to the public and may be used.

Buffer overflow in prot_get_ring_space in the bcmdhd4358 Wi-Fi driver on the Samsung Galaxy S6 SM-G920F G920FXXU5EQH7 allows an attacker (who has obtained code execution on the Wi-Fi chip) to overwrite kernel memory due to improper validation of the ring buffer read pointer. The Samsung ID is SVE-2018-12029.

This vulnerability allows remote attackers to execute arbitrary code on vulnerable installations of Losant Arduino MQTT Client prior to V2.7. User interaction is not required to exploit this vulnerability. The specific flaw exists within the parsing of MQTT PUBLISH packets. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-6436.

Lack of check of input size can make device memory get corrupted because of buffer overflow in snapdragon automobile, snapdragon mobile and snapdragon wear in versions MDM9206, MDM9607, MDM9615, MDM9625, MDM9635M, MDM9640, MDM9645, MDM9650, MDM9655, MSM8909W, MSM8996AU, SD 210/SD 212/SD 205, SD 410/12, SD 425, SD 427, SD 430, SD 435, SD 439 / SD 429, SD 450, SD 615/16/SD 415, SD 625, SD 636, SD 650/52, SD 712 / SD 710 / SD 670, SD 810, SD 820, SD 820A, SD 835, SD 845 / SD 850, SDA660, SDM439, SDM630, SDM660, SDX20, Snapdragon_High_Med_2016, SXR1130