curl 7.41.0 through 7.73.0 is vulnerable to an improper check for certificate revocation due to insufficient verification of the OCSP response.

libcurl would reuse a previously created connection even when a TLS or SSHrelated option had been changed that should have prohibited reuse.libcurl keeps previously used connections in a connection pool for subsequenttransfers to reuse if one of them matches the setup. However, several TLS andSSH settings were left out from the configuration match checks, making themmatch too easily.

cURL before 7.47.0 on Windows allows attackers to write to arbitrary files in the current working directory on a different drive via a colon in a remote file name.

The ConnectionExists function in lib/url.c in libcurl before 7.47.0 does not properly re-use NTLM-authenticated proxy connections, which might allow remote attackers to authenticate as other users via a request, a similar issue to CVE-2014-0015.

cURL and libcurl 7.10.6 through 7.41.0 does not properly re-use NTLM connections, which allows remote attackers to connect as other users via an unauthenticated request, a similar issue to CVE-2014-0015.

cURL and libcurl 7.10.6 through 7.41.0 do not properly re-use authenticated Negotiate connections, which allows remote attackers to connect as other users via a request.

cURL and libcurl before 7.38.0 does not properly handle IP addresses in cookie domain names, which allows remote attackers to set cookies for or send arbitrary cookies to certain sites, as demonstrated by a site at 192.168.0.1 setting cookies for a site at 127.168.0.1.

cURL and libcurl before 7.38.0 allow remote attackers to bypass the Same Origin Policy and set cookies for arbitrary sites by setting a cookie for a top-level domain.

curl and libcurl before 7.50.2, when built with NSS and the libnsspem.so library is available at runtime, allow remote attackers to hijack the authentication of a TLS connection by leveraging reuse of a previously loaded client certificate from file for a connection for which no certificate has been set, a different vulnerability than CVE-2016-5420.

A flaw was found in curl before version 7.51. If cookie state is written into a cookie jar file that is later read back and used for subsequent requests, a malicious HTTP server can inject new cookies for arbitrary domains into said cookie jar.

curl before version 7.51.0 uses outdated IDNA 2003 standard to handle International Domain Names and this may lead users to potentially and unknowingly issue network transfer requests to the wrong host.

curl before version 7.51.0 doesn't parse the authority component of the URL correctly when the host name part ends with a '#' character, and could instead be tricked into connecting to a different host. This may have security implications if you for example use an URL parser that follows the RFC to check for allowed domains before using curl to request them.

curl and libcurl before 7.50.1 do not check the client certificate when choosing the TLS connection to reuse, which might allow remote attackers to hijack the authentication of the connection by leveraging a previously created connection with a different client certificate.

The curl URL parser wrongly accepts percent-encoded URL separators like '/'when decoding the host name part of a URL, making it a *different* URL usingthe wrong host name when it is later retrieved.For example, a URL like `http://example.com%2F127.0.0.1/`, would be allowed bythe parser and get transposed into `http://example.com/127.0.0.1/`. This flawcan be used to circumvent filters, checks and more.

curl inadvertently kept the SSL session ID for connections in its cache even when the verify status (*OCSP stapling*) test failed. A subsequent transfer to the same hostname could then succeed if the session ID cache was still fresh, which then skipped the verify status check.

libcurl-using applications can ask for a specific client certificate to be used in a transfer. This is done with the `CURLOPT_SSLCERT` option (`--cert` with the command line tool).When libcurl is built to use the macOS native TLS library Secure Transport, an application can ask for the client certificate by name or with a file name - using the same option. If the name exists as a file, it will be used instead of by name.If the appliction runs with a current working directory that is writable by other users (like `/tmp`), a malicious user can create a file name with the same name as the app wants to use by name, and thereby trick the application to use the file based cert instead of the one referred to by name making libcurl send the wrong client certificate in the TLS connection handshake.

A vulnerability exists where a new transfer that uses STARTTLS to upgrade the connection might reuse an existing live connection even though the TLS configuration mismatches so it should not.

When curl is told to use the Certificate Status Request TLS extension, often referred to as *OCSP stapling*, to verify that the server certificate is valid, it fails to detect OCSP problems and instead wrongly consider the response as fine.

A vulnerability exists where a connection requiring TLS incorrectly reuses an existing unencrypted connection from the same connection pool. If an initial transfer is made in clear-text (via IMAP, SMTP, or POP3), a subsequent request to that same host bypasses the TLS requirement and instead transmit data unencrypted.

When a user invokes curl using a schemeless URL combined with `--proto-default` sftp (or scp), a disconnect occurs between the tool layer and libcurl. The tool layer incorrectly infers the URL scheme, which erroneously bypasses the initialization of critical SSH security options like CURLOPT_SSH_HOST_PUBLIC_KEY_SHA256 and CURLOPT_SSH_KNOWNHOSTS. Conversely, the libcurl runtime successfully honors CURLOPT_DEFAULT_PROTOCOL and establishes the connection via SFTP/SCP as specified. Because the tool layer skipped the security configuration, these SSH host verification options are silently omitted, causing curl to connect to an unverified SSH remote host without throwing an error.

libcurl keeps previously used connections in a connection pool for subsequent transfers to reuse if one of them matches the setup. An easy handle that first uses default native CA trust can continue trusting the native platform store after the application switches that same handle to custom CA material for a later transfer.

When doing TLS related transfers with reused easy or multi handles and altering the `CURLSSLOPT_NO_PARTIALCHAIN` option, libcurl could accidentally reuse a CA store cached in memory for which the partial chain option was reversed. Contrary to the user's wishes and expectations. This could make libcurl find and accept a trust chain that it otherwise would not.

When using `CURLOPT_PINNEDPUBLICKEY` option with libcurl or `--pinnedpubkey` with the curl tool,curl should check the public key of the server certificate to verify the peer. This check was skipped in a certain condition that would then make curl allow the connection without performing the proper check, thus not noticing a possible impostor. To skip this check, the connection had to be done with QUIC with ngtcp2 built to use GnuTLS and the user had to explicitly disable the standard certificate verification.

curl before 7.53.0 has an incorrect TLS Certificate Status Request extension feature that asks for a fresh proof of the server's certificate's validity in the code that checks for a test success or failure. It ends up always thinking there's valid proof, even when there is none or if the server doesn't support the TLS extension in question. This could lead to users not detecting when a server's certificate goes invalid or otherwise be mislead that the server is in a better shape than it is in reality. This flaw also exists in the command line tool (--cert-status).

An improper certificate validation vulnerability exists in curl <v8.1.0 in the way it supports matching of wildcard patterns when listed as "Subject Alternative Name" in TLS server certificates. curl can be built to use its own name matching function for TLS rather than one provided by a TLS library. This private wildcard matching function would match IDN (International Domain Name) hosts incorrectly and could as a result accept patterns that otherwise should mismatch. IDN hostnames are converted to puny code before used for certificate checks. Puny coded names always start with `xn--` and should not be allowed to pattern match, but the wildcard check in curl could still check for `x*`, which would match even though the IDN name most likely contained nothing even resembling an `x`.

The libcurl CURLOPT_SSL_VERIFYPEER option was disabled on a subset of requests made by Nest production devices which enabled a potential man-in-the-middle attack on requests to Google cloud services by any host the traffic was routed through.

libcurl skips the certificate verification for a QUIC connection under certain conditions, when built to use wolfSSL. If told to use an unknown/bad cipher or curve, the error path accidentally skips the verification and returns OK, thus ignoring any certificate problems.

The verify_certificate function in lib/vtls/schannel.c in libcurl 7.30.0 through 7.51.0, when built for Windows CE using the schannel TLS backend, makes it easier for remote attackers to conduct man-in-the-middle attacks via a crafted wildcard SAN in a server certificate, as demonstrated by "*.com."

When curl is told to use the Certificate Status Request TLS extension, often referred to as OCSP stapling, to verify that the server certificate is valid, it might fail to detect some OCSP problems and instead wrongly consider the response as fine. If the returned status reports another error than 'revoked' (like for example 'unauthorized') it is not treated as a bad certficate.

libcurl supports *pinning* of the server certificate public key for HTTPS transfers. Due to an omission, this check is not performed when connecting with QUIC for HTTP/3, when the TLS backend is wolfSSL. Documentation says the option works with wolfSSL, failing to specify that it does not for QUIC and HTTP/3. Since pinning makes the transfer succeed if the pin is fine, users could unwittingly connect to an impostor server without noticing.

Shoplat App for iOS 1.10.00 through 1.18.00 does not properly verify SSL certificates.

libgrss through 0.7.0 fails to perform TLS certificate verification when downloading feeds, allowing remote attackers to manipulate the contents of feeds without detection. This occurs because of the default behavior of SoupSessionSync.

IMAPFilter through 2.6.12 does not validate the hostname in an SSL certificate.

Nim is a statically typed compiled systems programming language. In Nim standard library before 1.4.2, httpClient SSL/TLS certificate verification was disabled by default. Users can upgrade to version 1.4.2 to receive a patch or, as a workaround, set "verifyMode = CVerifyPeer" as documented.

Salt before 2014.7.6 does not verify certificates when connecting via the aliyun, proxmox, and splunk modules.

Fossil before 2.14.2 and 2.15.x before 2.15.2 often skips the hostname check during TLS certificate validation.

FreeRADIUS 2.2.x before 2.2.8 and 3.0.x before 3.0.9 does not properly check revocation of intermediate CA certificates.

Improper certificate validation vulnerability exists in 'デジラアプリ' App for iOS prior to ver.80.10.00. If this vulnerability is exploited, a man-in-the-middle attack may allow an attacker to eavesdrop on and/or tamper with an encrypted communication.

EMC RSA BSAFE Micro Edition Suite (MES) 4.0.x before 4.0.8 and 4.1.x before 4.1.3, RSA BSAFE Crypto-J before 6.2, RSA BSAFE SSL-J before 6.2, and RSA BSAFE SSL-C 2.8.9 and earlier do not enforce certain constraints on certificate data, which allows remote attackers to defeat a fingerprint-based certificate-blacklist protection mechanism by including crafted data within a certificate's unsigned portion, a similar issue to CVE-2014-8275.

HashiCorp Consul and Consul Enterprise 1.3.0 through 1.10.0 Envoy proxy TLS configuration does not validate destination service identity in the encoded subject alternative name. Fixed in 1.8.14, 1.9.8, and 1.10.1.

GnuTLS before 3.3.13 does not validate that the signature algorithms match when importing a certificate.

IBM Sterling Secure Proxy 6.0.3 and IBM Secure External Authentication Server 6.0.3 does not properly ensure that a certificate is actually associated with the host due to improper validation of certificates. IBM X-Force ID: 201104.

WTW-EAGLE App does not properly validate server certificates, which may allow a man-in-the-middle attacker to monitor encrypted traffic.

An issue was discovered in tls_verify_crl in ProFTPD through 1.3.6b. Failure to check for the appropriate field of a CRL entry (checking twice for subject, rather than once for subject and once for issuer) prevents some valid CRLs from being taken into account, and can allow clients whose certificates have been revoked to proceed with a connection to the server.

An issue was discovered in tls_verify_crl in ProFTPD before 1.3.6. A wrong iteration variable, used when checking a client certificate against CRL entries (installed by a system administrator), can cause some CRL entries to be ignored, and can allow clients whose certificates have been revoked to proceed with a connection to the server.

configurationwatcher.go in Traefik 2.x before 2.1.4 and TraefikEE 2.0.0 mishandles the purging of certificate contents from providers before logging.

LibreOffice supports digital signatures of ODF documents and macros within documents, presenting visual aids that no alteration of the document occurred since the last signing and that the signature is valid. An Improper Certificate Validation vulnerability in LibreOffice allowed an attacker to create a digitally signed ODF document, by manipulating the documentsignatures.xml or macrosignatures.xml stream within the document to contain both "X509Data" and "KeyValue" children of the "KeyInfo" tag, which when opened caused LibreOffice to verify using the "KeyValue" but to report verification with the unrelated "X509Data" value. This issue affects: The Document Foundation LibreOffice 7.2 versions prior to 7.2.5.

LibreOffice supports digital signatures of ODF documents and macros within documents, presenting visual aids that no alteration of the document occurred since the last signing and that the signature is valid. An Improper Certificate Validation vulnerability in LibreOffice allowed an attacker to create a digitally signed ODF document, by manipulating the documentsignatures.xml or macrosignatures.xml stream within the document to combine multiple certificate data, which when opened caused LibreOffice to display a validly signed indicator but whose content was unrelated to the signature shown. This issue affects: The Document Foundation LibreOffice 7-0 versions prior to 7.0.6; 7-1 versions prior to 7.1.2.

LibreOffice supports digital signatures of ODF documents and macros within documents, presenting visual aids that no alteration of the document occurred since the last signing and that the signature is valid. An Improper Certificate Validation vulnerability in LibreOffice allowed an attacker to modify a digitally signed ODF document to insert an additional signing time timestamp which LibreOffice would incorrectly present as a valid signature signed at the bogus signing time. This issue affects: The Document Foundation LibreOffice 7-0 versions prior to 7.0.6; 7-1 versions prior to 7.1.2.

wolfssl before 3.2.0 does not properly authorize CA certificate for signing other certificates.