Out of boundary access is possible as there is no validation of data accessed against the received size of the packet in case of malicious firmware in Snapdragon Auto, Snapdragon Compute, Snapdragon Connectivity, Snapdragon Consumer Electronics Connectivity, Snapdragon Consumer IOT, Snapdragon Industrial IOT, Snapdragon Mobile, Snapdragon Voice & Music, Snapdragon Wearables in APQ8009, APQ8017, APQ8053, APQ8096AU, APQ8098, MDM9206, MDM9207C, MDM9607, MDM9640, MDM9650, MSM8909W, MSM8917, MSM8920, MSM8937, MSM8940, MSM8953, MSM8996AU, MSM8998, Nicobar, QCN7605, QCS405, QCS605, QM215, SA6155P, SDA660, SDA845, SDM429, SDM439, SDM450, SDM630, SDM632, SDM636, SDM660, SDM670, SDM710, SDM845, SDX20, SDX24, SDX55, SM6150, SM7150, SM8150, SM8250, SXR1130, SXR2130

Accessing data buffer beyond the available data while parsing ogg clip can lead to null-pointer dereference and then memory corruption in Snapdragon Auto, Snapdragon Compute, Snapdragon Connectivity, Snapdragon Consumer IOT, Snapdragon Industrial IOT, Snapdragon IoT, Snapdragon Mobile, Snapdragon Voice & Music, Snapdragon Wearables in APQ8009, APQ8017, APQ8053, APQ8064, APQ8096AU, APQ8098, MDM9206, MDM9207C, MDM9607, MSM8905, MSM8909, MSM8909W, MSM8917, MSM8939, MSM8953, MSM8996, MSM8996AU, Nicobar, QCS405, QCS605, QM215, SDA660, SDA845, SDM429, SDM439, SDM450, SDM630, SDM632, SDM636, SDM660, SDX20, SM6150, SM7150, SM8150, SM8250, SXR1130, SXR2130

Heap corruption in Intel(R) Baseboard Management Controller firmware may allow an unauthenticated user to potentially enable information disclosure, escalation of privilege and/or denial of service via network access.

In WebAccess/SCADA, Versions 8.3.5 and prior, multiple stack-based buffer overflow vulnerabilities are caused by a lack of proper validation of the length of user-supplied data. Exploitation of these vulnerabilities may allow remote code execution.

A stack buffer overflow vulnerability has been reported to affect QNAP device running QUSBCam2. If exploited, this vulnerability allows attackers to execute arbitrary code. We have already fixed this vulnerability in the following versions of QUSBCam2: QTS 4.5.4: QUSBCam2 1.1.4 ( 2021/07/30 ) and later QTS 5.0: QUSBCam2 2.0.1 ( 2021/08/03 ) and later QTS 4.3.6: QUSBCam2 1.1.4 ( 2021/07/30 ) and later QTS 4.3.3: QUSBCam2 1.1.4 ( 2021/08/06 ) and later QuTS hero 4.5.3: QUSBCam2 1.1.4 ( 2021/07/30 ) and later

Foxit Reader before 10.1.4 and PhantomPDF before 10.1.4 have an out-of-bounds write because the Cross-Reference table is mishandled during Office document conversion.

In PHP versions 7.1.x below 7.1.33, 7.2.x below 7.2.24 and 7.3.x below 7.3.11 in certain configurations of FPM setup it is possible to cause FPM module to write past allocated buffers into the space reserved for FCGI protocol data, thus opening the possibility of remote code execution.

An issue was discovered in D-Link DIR-806 devices. There is a stack-based buffer overflow in function hnap_main at /htdocs/cgibin. The function will call sprintf without checking the length of strings in parameters given by HTTP header and can be controlled by users. And it finally leads to a stack-based buffer overflow via a special HTTP header.

In Advantech WebAccess versions V8.2_20170817 and prior, WebAccess versions V8.3.0 and prior, WebAccess Dashboard versions V.2.0.15 and prior, WebAccess Scada Node versions prior to 8.3.1, and WebAccess/NMS 2.0.3 and prior, a heap-based buffer overflow vulnerability has been identified, which may allow an attacker to execute arbitrary code.

An attacker could send a crafted HTTP/HTTPS request to render the web server unavailable and/or lead to remote code execution caused by a stack-based buffer overflow vulnerability. A cold restart is required for recovering CompactLogix 5370 L1, L2, and L3 Controllers, Compact GuardLogix 5370 controllers, and Armor Compact GuardLogix 5370 Controllers Versions 20 - 30 and earlier.

In PHP imagick extension in versions between 3.3.0 and 3.4.4, writing to an array of values in ImagickKernel::fromMatrix() function did not check that the address will be within the allocated array. This could lead to out of bounds write to memory if the function is called with the data controlled by untrusted party.

Buffer underflow in src/http/ngx_http_parse.c in nginx 0.1.0 through 0.5.37, 0.6.x before 0.6.39, 0.7.x before 0.7.62, and 0.8.x before 0.8.15 allows remote attackers to execute arbitrary code via crafted HTTP requests.

idn2_to_ascii_4i in lib/lookup.c in GNU libidn2 before 2.1.1 has a heap-based buffer overflow via a long domain string.

In mjs_json.c in Cesanta MongooseOS mJS 1.26, a maliciously formed JSON string can trigger an off-by-one heap-based buffer overflow in mjs_json_parse, which can potentially lead to redirection of control flow. NOTE: the original reporter disputes the significance of this finding because "there isn’t very much of an opportunity to exploit this reliably for an information leak, so there isn’t any real security impact."

A memory corruption vulnerability exists in the Windows DHCP client when an attacker sends specially crafted DHCP responses to a client, aka "Windows DHCP Client Remote Code Execution Vulnerability." This affects Windows 10, Windows 10 Servers.

Linaro/OP-TEE OP-TEE 3.3.0 and earlier is affected by: Buffer Overflow. The impact is: Execution of code in TEE core (kernel) context. The component is: optee_os. The fixed version is: 3.4.0 and later.

FATEK Automation WinProladder Versions 3.30 and prior are vulnerable to an out-of-bounds write, which may allow an attacker to execute arbitrary code.

An issue was discovered in HCC embedded InterNiche 4.0.1. A potential heap buffer overflow exists in the code that parses the HTTP POST request, due to lack of size validation. This vulnerability requires the attacker to send a crafted HTTP POST request with a URI longer than 50 bytes. This leads to a heap overflow in wbs_post() via an strcpy() call.

RIOT RIOT-OS version after commit 7af03ab624db0412c727eed9ab7630a5282e2fd3 contains a Buffer Overflow vulnerability in sock_dns, an implementation of the DNS protocol utilizing the RIOT sock API that can result in Remote code executing. This attack appears to be exploitable via network connectivity.

Linaro/OP-TEE OP-TEE 3.3.0 and earlier is affected by: Buffer Overflow. The impact is: Code execution in the context of TEE core (kernel). The component is: optee_os. The fixed version is: 3.4.0 and later.

Linaro/OP-TEE OP-TEE 3.3.0 and earlier is affected by: Boundary crossing. The impact is: Memory corruption of the TEE itself. The component is: optee_os. The fixed version is: 3.4.0 and later.

OFFIS.de DCMTK 3.6.3 and below is affected by: Buffer Overflow. The impact is: Possible code execution and confirmed Denial of Service. The component is: DcmRLEDecoder::decompress() (file dcrledec.h, line 122). The attack vector is: Many scenarios of DICOM file processing (e.g. DICOM to image conversion). The fixed version is: 3.6.4, after commit 40917614e.

Quake3e < 5ed740d is affected by: Buffer Overflow. The impact is: Possible code execution and denial of service. The component is: Argument string creation.

Linaro/OP-TEE OP-TEE Prior to version v3.4.0 is affected by: Boundary checks. The impact is: This could lead to corruption of any memory which the TA can access. The component is: optee_os. The fixed version is: v3.4.0.

CODESYS V2 runtime system SP before 2.4.7.55 has a Stack-based Buffer Overflow.

An issue was discovered in the reorder crate through 2021-02-24 for Rust. swap_index can return uninitialized values if an iterator returns a len() that is too large.

OpenModelica OMCompiler is affected by: Buffer Overflow. The impact is: Possible code execution and denial of service. The component is: OPENMODELICAHOME parameter changeable via environment variable. The attack vector is: Changing an environment variable.

An issue was discovered in Wind River VxWorks through 6.8. There is a possible stack overflow in dhcp server.

An issue was discovered in the reorder crate through 2021-02-24 for Rust. swap_index has an out-of-bounds write if an iterator returns a len() that is too small.

CODESYS V2 Web-Server before 1.1.9.20 has a Stack-based Buffer Overflow.

In bta_dm_sdp_result of bta_dm_act.cc, there is a possible out of bounds stack write due to a missing bounds check. This could lead to remote code execution with no additional execution privileges needed. User interaction is not needed for exploitation. Product: Android Versions: Android-6.0 Android-6.0.1 Android-7.0 Android-7.1.1 Android-7.1.2 Android-8.0 Android-8.1 Android ID: A-74016921.

In bta_ag_parse_cmer of bta_ag_cmd.cc in Android-7.0, Android-7.1.1, Android-7.1.2, Android-8.0, Android-8.1 and Android-9, there is a possible out-of-bounds write due to a missing bounds check. This could lead to remote code execution in the bluetooth server with no additional execution privileges needed. User interaction is not needed for exploitation. Android ID: A-112860487.

On Samsung mobile devices with M(6.0) and N(7.x) software, a heap overflow in the sensorhub binder service leads to code execution in a privileged process, aka SVE-2017-10991.

The affected product is vulnerable to an out-of-bounds write, which may result in corruption of data or code execution on the Welch Allyn medical device management tools (Welch Allyn Service Tool: versions prior to v1.10, Welch Allyn Connex Device Integration Suite – Network Connectivity Engine (NCE): versions prior to v5.3, Welch Allyn Software Development Kit (SDK): versions prior to v3.2, Welch Allyn Connex Central Station (CS): versions prior to v1.8.6, Welch Allyn Service Monitor: versions prior to v1.7.0.0, Welch Allyn Connex Vital Signs Monitor (CVSM): versions prior to v2.43.02, Welch Allyn Connex Integrated Wall System (CIWS): versions prior to v2.43.02, Welch Allyn Connex Spot Monitor (CSM): versions prior to v1.52, Welch Allyn Spot Vital Signs 4400 Device (Spot 4400) / Welch Allyn Spot 4400 Vital Signs Extended Care Device: versions prior to v1.11.00).

A vulnerability, which was classified as critical, has been found in GPAC 2.3-DEV-rev40-g3602a5ded. This issue affects the function mp3_dmx_process of the file filters/reframe_mp3.c. The manipulation leads to heap-based buffer overflow. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-221087.

LibreDWG v0.12.3 was discovered to contain a heap-buffer overflow via decode_preR13.

A stack-based buffer overflow vulnerability has been reported to affect QNAP NAS devices running Surveillance Station. If exploited, this vulnerability allows attackers to execute arbitrary code. QNAP have already fixed this vulnerability in the following versions: Surveillance Station 5.1.5.4.3 (and later) for ARM CPU NAS (64bit OS) and x86 CPU NAS (64bit OS) Surveillance Station 5.1.5.3.3 (and later) for ARM CPU NAS (32bit OS) and x86 CPU NAS (32bit OS)

A Buffer Overflow issue was discovered in Kamailio before 4.4.7, 5.0.x before 5.0.6, and 5.1.x before 5.1.2. A specially crafted REGISTER message with a malformed branch or From tag triggers an off-by-one heap-based buffer overflow in the tmx_check_pretran function in modules/tmx/tmx_pretran.c.

A remote code execution vulnerability due to incomplete check for 'xheader_decode_path_record' function's parameter length value in the ark library. Remote attackers can induce exploit malicious code using this function.

An issue was discovered in the calamine crate before 0.17.0 for Rust. It allows attackers to overwrite heap-memory locations because Vec::set_len is used without proper memory claiming, and this uninitialized memory is used for a user-provided Read operation, as demonstrated by Sectors::get.

In Apache HTTP Server versions 2.4.0 to 2.4.46 a specially crafted SessionHeader sent by an origin server could cause a heap overflow

A heap buffer overflow vulnerability inside of BMP image processing was found at [core] module of ONLYOFFICE DocumentServer v4.0.0-9-v6.0.0. Using this vulnerability, an attacker is able to gain remote code executions on DocumentServer.

Multiple stack-based buffer overflow vulnerabilities [CWE-121] both in network daemons and in the command line interpreter of FortiWAN before 4.5.9 may allow an unauthenticated attacker to potentially corrupt control data in memory and execute arbitrary code via specifically crafted requests.

A certain sequence of valid BGP or IPv6 BFD packets may trigger a stack based buffer overflow in the Junos OS Packet Forwarding Engine manager (FXPC) process on QFX5000 series, EX4300, EX4600 devices. This issue can result in a crash of the fxpc daemon or may potentially lead to remote code execution. Affected releases are Juniper Networks Junos OS on QFX 5000 series, EX4300, EX4600 are: 14.1X53; 15.1X53 versions prior to 15.1X53-D235; 17.1 versions prior to 17.1R3; 17.2 versions prior to 17.2R3; 17.3 versions prior to 17.3R3-S2, 17.3R4; 17.4 versions prior to 17.4R2-S1, 17.4R3; 18.1 versions prior to 18.1R3-S1, 18.1R4; 18.2 versions prior to 18.2R2; 18.2X75 versions prior to 18.2X75-D30; 18.3 versions prior to 18.3R2.

An issue was discovered in the smallvec crate before 0.6.14 and 1.x before 1.6.1 for Rust. There is a heap-based buffer overflow in SmallVec::insert_many.

FreeType 2 before 2016-12-16 has an out-of-bounds write caused by a heap-based buffer overflow related to the cff_parser_run function in cff/cffparse.c.

An issue was discovered in D-Link DIR-816 A2 1.10 B05 devices. Within the handler function of the /goform/addassignment route, a very long text entry for the"'s_ip" and "s_mac" fields could lead to a Stack-Based Buffer Overflow and overwrite the return address.

Stack-based buffer overflow in Asuswrt-Merlin firmware for ASUS devices older than 384.4 and ASUS firmware before 3.0.0.4.382.50470 for devices allows remote attackers to execute arbitrary code by providing a long string to the blocking.asp page via a GET or POST request. Vulnerable parameters are flag, mac, and cat_id.