D-Link router DSL-2750U with firmware vME1.16 or prior versions is vulnerable to OS command injection. An unauthenticated attacker on the local network may exploit this, with CVE-2021-3707, to execute any OS commands on the vulnerable device.

D-Link DIR-2640-US 1.01B04 is affected by Insufficiently Protected Credentials. D-Link AC2600(DIR-2640) stores the device system account password in plain text. It does not use linux user management. In addition, the passwords of all devices are the same, and they cannot be modified by normal users. An attacker can easily log in to the target router through the serial port and obtain root privileges.

There are multiple out-of-bounds vulnerabilities in some processes of D-Link AC2600(DIR-2640) 1.01B04. Ordinary permissions can be elevated to administrator permissions, resulting in local arbitrary code execution. An attacker can combine other vulnerabilities to further achieve the purpose of remote code execution.

D-Link DIR-850L REV. A (with firmware through FW114WWb07_h2ab_beta1) and REV. B (with firmware through FW208WWb02) devices have 0666 /var/run/hostapd* permissions.

D-Link DIR-850L REV. A (with firmware through FW114WWb07_h2ab_beta1) and REV. B (with firmware through FW208WWb02) devices have 0644 /var/etc/shadow (aka the /etc/shadow symlink target) permissions.

D-Link DIR-850L REV. A (with firmware through FW114WWb07_h2ab_beta1) and REV. B (with firmware through FW208WWb02) devices have 0666 /var/run/storage_account_root permissions.

D-Link DIR-850L REV. A (with firmware through FW114WWb07_h2ab_beta1) and REV. B (with firmware through FW208WWb02) devices have 0666 /var/etc/hnapasswd permissions.

D-Link DIR-850L REV. A (with firmware through FW114WWb07_h2ab_beta1) and REV. B (with firmware through FW208WWb02) devices have 0666 /var/passwd permissions.

An issue was discovered on D-Link 6600-AP and DWL-3600AP Ax 4.2.0.14 21/03/2019 devices. There is use of weak ciphers for SSH such as diffie-hellman-group1-sha1.

A command injection vulnerability in the firmware_update command, in the device's restricted telnet interface, allows an authenticated attacker to execute arbitrary commands as root.

D-link DSL-2750U ISL2750UEME3.V1E devices allow approximately 90 seconds of access to the control panel, after a restart, before MAC address filtering rules become active.

D-Link DIR-809 devices with firmware through DIR-809Ax_FW1.12WWB03_20190410 were discovered to contain a stack buffer overflow vulnerability in the function FUN_80046eb4 in /formSetPortTr. This vulnerability is triggered via a crafted POST request.

A command injection vulnerability in the protest binary allows an attacker with access to the remote command line interface to execute arbitrary commands as root.

A vulnerability, which was classified as critical, has been found in D-Link DIR-890L up to 111b04. This issue affects some unknown processing of the file rgbin of the component UART Port. The manipulation leads to hard-coded credentials. It is possible to launch the attack on the physical device. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

D-Link Network Assistant Uncontrolled Search Path Element Local Privilege Escalation Vulnerability. This vulnerability allows local attackers to escalate privileges on affected installations of D-Link Network Assistant. An attacker must first obtain the ability to execute low-privileged code on the target system in order to exploit this vulnerability. The specific flaw exists within the DNACore service. The service loads a file from an unsecured location. An attacker can leverage this vulnerability to escalate privileges and execute arbitrary code in the context of SYSTEM. Was ZDI-CAN-21426.

An issue in DLink DWR 2000M 5G CPE With Wifi 6 Ax1800 and Dlink DWR 5G CPE DWR-2000M_1.34ME allows a local attacker to execute arbitrary code via a crafted request.

D-Link DWL-2600AP 4.2.0.15 Rev A devices have an authenticated OS command injection vulnerability via the Restore Configuration functionality in the Web interface, using shell metacharacters in the admin.cgi?action=config_restore configRestore or configServerip parameter.

D-Link DWL-2600AP 4.2.0.15 Rev A devices have an authenticated OS command injection vulnerability via the Save Configuration functionality in the Web interface, using shell metacharacters in the admin.cgi?action=config_save configBackup or downloadServerip parameter.

D-Link DWL-2600AP 4.2.0.15 Rev A devices have an authenticated OS command injection vulnerability via the Upgrade Firmware functionality in the Web interface, using shell metacharacters in the admin.cgi?action=upgrade firmwareRestore or firmwareServerip parameter.

The CaptivelPortal service on D-Link Central WiFiManager CWM-100 1.03 r0098 devices will load a Trojan horse "quserex.dll" from the CaptivelPortal.exe subdirectory under the D-Link directory, which allows unprivileged local users to gain SYSTEM privileges.

A security vulnerability has been detected in D-Link DI-8100 16.07.26A1. Affected by this vulnerability is the function url_rule_asp of the file /url_rule.asp of the component POST Parameter Handler. Such manipulation leads to buffer overflow. It is possible to launch the attack remotely. The exploit has been disclosed publicly and may be used.

A vulnerability was detected in D-Link DI-8100 16.07.26A1. Affected by this issue is the function tggl_asp of the file /tggl.asp of the component HTTP Request Handler. Performing a manipulation of the argument Name results in buffer overflow. The attack can be initiated remotely. The exploit is now public and may be used.

A flaw has been found in D-Link DI-8100 16.07.26A1. This affects an unknown part of the file /url_member.asp of the component Web Management Interface. Executing a manipulation of the argument Name can lead to buffer overflow. The attack can be launched remotely. The exploit has been published and may be used.

A vulnerability has been found in D-Link DI-8100 16.07.26A1. This vulnerability affects the function sprintf of the file /user_group.asp of the component CGI Handler. The manipulation leads to buffer overflow. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used.

An issue was discovered on D-Link DCS-1100 and DCS-1130 devices. The device runs a custom daemon on UDP port 5978 which is called "dldps2121" and listens for broadcast packets sent on 255.255.255.255. This daemon handles custom D-Link UDP based protocol that allows D-Link mobile applications and desktop applications to discover D-Link devices on the local network. The binary processes the received UDP packets sent from any device in "main" function. One path in the function traverses towards a block of code that processing of packets which does an unbounded copy operation which allows to overflow the buffer. The custom protocol created by Dlink follows the following pattern: Packetlen, Type of packet; M=MAC address of device or broadcast; D=Device Type;C=base64 encoded command string;test=1111 We can see at address function starting at address 0x0000DBF8 handles the entire UDP packet and performs an insecure copy using strcpy function at address 0x0000DC88. This results in overflowing the stack pointer after 1060 characters and thus allows to control the PC register and results in code execution. The same form of communication can be initiated by any process including an attacker process on the mobile phone or the desktop and this allows a third-party application on the device to execute commands on the device without any authentication by sending just 1 UDP packet with custom base64 encoding.

An issue was discovered on D-Link DCS-1100 and DCS-1130 devices. The binary rtspd in /sbin folder of the device handles all the rtsp connections received by the device. It seems that the binary performs a memcpy operation at address 0x00011E34 with the value sent in the "Authorization: Basic" RTSP header and stores it on the stack. The number of bytes to be copied are calculated based on the length of the string sent in the RTSP header by the client. As a result, memcpy copies more data then it can hold on stack and this results in corrupting the registers for the caller function sub_F6CC which results in memory corruption. The severity of this attack is enlarged by the fact that the same value is then copied on the stack in the function 0x00011378 and this allows to overflow the buffer allocated and thus control the PC register which will result in arbitrary code execution on the device.

Multiple D-Link devices including the DIR-850L firmware versions 1.14B07 and 2.07.B05 contain a stack-based buffer overflow vulnerability in the web administration interface HNAP service.

A vulnerability, which was classified as critical, has been found in D-Link DAP-1562 1.10. Affected by this issue is the function http_request_parse of the component HTTP Header Handler. The manipulation of the argument Authorization leads to stack-based buffer overflow. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

Buffer overflow in the SSH server functionality on the D-Link DES-3800 with firmware before 4.50B052, DWL-2100AP with firmware before 2.50RC548, and DWL-3200AP with firmware before 2.55RC549 allows remote attackers to execute arbitrary code or cause a denial of service via unspecified vectors.

D-Link EyeOn Baby Monitor (DCS-825L) 1.08.1 has a remote code execution vulnerability. A UDP "Discover" service, which provides multiple functions such as changing the passwords and getting basic information, was installed on the device. A remote attacker can send a crafted UDP request to finderd to perform stack overflow and execute arbitrary code with root privilege on the device.

A security vulnerability has been detected in D-Link DNS-120, DNR-202L, DNS-315L, DNS-320, DNS-320L, DNS-320LW, DNS-321, DNR-322L, DNS-323, DNS-325, DNS-326, DNS-327L, DNR-326, DNS-340L, DNS-343, DNS-345, DNS-726-4, DNS-1100-4, DNS-1200-05 and DNS-1550-04 up to 20260205. This affects the function Downloads_Schedule_Info of the file /cgi-bin/download_mgr.cgi. Such manipulation leads to stack-based buffer overflow. The attack can be launched remotely. The exploit has been disclosed publicly and may be used.

An issue was discovered on D-Link DSL-3782 EU 1.01 devices. An authenticated user can pass a long buffer as a 'commit' parameter to the '/userfs/bin/tcapi' binary (in the Diagnostics component) using the 'commit <node_name>' function and cause memory corruption. Furthermore, it is possible to redirect the flow of the program and execute arbitrary code.

An issue was discovered on D-Link DSL-3782 EU 1.01 devices. An authenticated user can pass a long buffer as a 'staticGet' parameter to the '/userfs/bin/tcapi' binary (in the Diagnostics component) using the 'staticGet <node_name attr>' function and cause memory corruption. Furthermore, it is possible to redirect the flow of the program and execute arbitrary code.

A vulnerability has been found in D-Link DWR-M961 1.1.36 and classified as critical. This vulnerability affects unknown code of the file /boafrm/formStaticDHCP of the component Authorization Interface. The manipulation of the argument Hostname leads to stack-based buffer overflow. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. Upgrading to version 1.1.49 is able to address this issue. It is recommended to upgrade the affected component.

Processing malformed SOAP messages when performing the HNAP Login action causes a buffer overflow in the stack in some D-Link DIR routers. The vulnerable XML fields within the SOAP body are: Action, Username, LoginPassword, and Captcha. The following products are affected: DIR-823, DIR-822, DIR-818L(W), DIR-895L, DIR-890L, DIR-885L, DIR-880L, DIR-868L, and DIR-850L.

A flaw has been found in D-Link DNS-120, DNR-202L, DNS-315L, DNS-320, DNS-320L, DNS-320LW, DNS-321, DNR-322L, DNS-323, DNS-325, DNS-326, DNS-327L, DNR-326, DNS-340L, DNS-343, DNS-345, DNS-726-4, DNS-1100-4, DNS-1200-05 and DNS-1550-04 up to 20260205. This issue affects the function UPnP_AV_Server_Path_Setting of the file /cgi-bin/app_mgr.cgi. Executing a manipulation can lead to stack-based buffer overflow. The attack may be launched remotely. The exploit has been published and may be used.

A security flaw has been discovered in D-Link DIR-816 1.10CNB05. This affects an unknown function of the file /goform/form2RepeaterStep2.cgi of the component goahead. The manipulation of the argument key1/key2/key3/key4/pskValue results in stack-based buffer overflow. The attack may be launched remotely. The exploit has been released to the public and may be used for attacks. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability was detected in D-Link DNS-120, DNR-202L, DNS-315L, DNS-320, DNS-320L, DNS-320LW, DNS-321, DNR-322L, DNS-323, DNS-325, DNS-326, DNS-327L, DNR-326, DNS-340L, DNS-343, DNS-345, DNS-726-4, DNS-1100-4, DNS-1200-05 and DNS-1550-04 up to 20260205. This vulnerability affects the function cgi_myfavorite_del_user/cgi_myfavorite_verify of the file /cgi-bin/gui_mgr.cgi. Performing a manipulation results in stack-based buffer overflow. The attack may be initiated remotely. The exploit is now public and may be used.

A vulnerability classified as critical was found in D-Link DAP-1320 1.00. Affected by this vulnerability is the function set_ws_action of the file /dws/api/. The manipulation leads to heap-based buffer overflow. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

An issue was discovered on D-Link DCS-1100 and DCS-1130 devices. The device has a custom binary called mp4ts under the /var/www/video folder. It seems that this binary dumps the HTTP VERB in the system logs. As a part of doing that it retrieves the HTTP VERB sent by the user and uses a vulnerable sprintf function at address 0x0000C3D4 in the function sub_C210 to copy the value into a string and then into a log file. Since there is no bounds check being performed on the environment variable at address 0x0000C360 this results in a stack overflow and overwrites the PC register allowing an attacker to execute buffer overflow or even a command injection attack.

A vulnerability was found in D-Link DIR-825M 1.1.12. This issue affects the function sub_414BA8 of the file /boafrm/formWanConfigSetup. The manipulation of the argument submit-url results in buffer overflow. The attack can be executed remotely. The exploit has been made public and could be used.

A vulnerability was identified in D-Link DWR-M920 up to 1.1.50. This issue affects the function sub_464794 of the file /boafrm/formDefRoute. The manipulation of the argument submit-url leads to buffer overflow. The attack may be initiated remotely. The exploit is publicly available and might be used.

A security flaw has been discovered in D-Link DWR-M920 up to 1.1.50. Impacted is the function sub_42261C of the file /boafrm/formFilter. The manipulation of the argument ip6addr results in stack-based buffer overflow. The attack may be launched remotely. The exploit has been released to the public and may be exploited.

A vulnerability was detected in D-Link DWR-M920 up to 1.1.50. This affects the function sub_423848 of the file /boafrm/formParentControl. Performing manipulation of the argument submit-url results in buffer overflow. The attack is possible to be carried out remotely. The exploit is now public and may be used.

A vulnerability was found in D-Link DIR-600 up to 2.15WWb02. Affected by this vulnerability is an unknown functionality of the file hedwig.cgi of the component HTTP Header Handler. The manipulation of the argument Cookie results in stack-based buffer overflow. It is possible to launch the attack remotely. The exploit has been made public and could be used. This vulnerability only affects products that are no longer supported by the maintainer.

Buffer overflow in D-Link DAP-2310 2.06 and earlier, DAP-2330 1.06 and earlier, DAP-2360 2.06 and earlier, DAP-2553 H/W ver. B1 3.05 and earlier, DAP-2660 1.11 and earlier, DAP-2690 3.15 and earlier, DAP-2695 1.16 and earlier, DAP-3320 1.00 and earlier, and DAP-3662 1.01 and earlier allows remote attackers to have unspecified impact via a crafted 'dlink_uid' cookie.

A flaw has been found in D-Link DIR-822K and DWR-M920 1.00_20250513164613/1.1.50. This affects an unknown part of the file /boafrm/formDdns. This manipulation of the argument submit-url causes memory corruption. The attack may be initiated remotely. The exploit has been published and may be used.

A vulnerability was found in D-Link DIR-822K 1.00. This issue affects the function sub_455524 of the file /boafrm/formNtp. Performing manipulation of the argument submit-url results in buffer overflow. Remote exploitation of the attack is possible. The exploit has been made public and could be used.

A vulnerability was determined in D-Link DIR-822K and DWR-M920 1.00_20250513164613/1.1.50. Impacted is an unknown function of the file /boafrm/formVpnConfigSetup. Executing manipulation of the argument submit-url can lead to buffer overflow. The attack can be executed remotely. The exploit has been publicly disclosed and may be utilized.