An improper privilege check in the OTRS ticket move action in the agent interface allows any as agent authenticated attacker to to perform a move of an ticket without the needed permission. This issue affects OTRS: from 8.0.X before 8.0.35.

The Web Notification API in Mozilla Firefox before 29.0, Firefox ESR 24.x before 24.5, Thunderbird before 24.5, and SeaMonkey before 2.26 allows remote attackers to bypass intended source-component restrictions and execute arbitrary JavaScript code in a privileged context via a crafted web page for which Notification.permission is granted.

An issue was discovered in Xen through 4.12.x allowing 32-bit PV guest OS users to gain guest OS privileges by installing and using descriptors. There is missing descriptor table limit checking in x86 PV emulation. When emulating certain PV guest operations, descriptor table accesses are performed by the emulating code. Such accesses should respect the guest specified limits, unless otherwise guaranteed to fail in such a case. Without this, emulation of 32-bit guest user mode calls through call gates would allow guest user mode to install and then use descriptors of their choice, as long as the guest kernel did not itself install an LDT. (Most OSes don't install any LDT by default). 32-bit PV guest user mode can elevate its privileges to that of the guest kernel. Xen versions from at least 3.2 onwards are affected. Only 32-bit PV guest user mode can leverage this vulnerability. HVM, PVH, as well as 64-bit PV guests cannot leverage this vulnerability. Arm systems are unaffected.

multipath-tools 0.7.0 through 0.9.x before 0.9.2 allows local users to obtain root access, as exploited alone or in conjunction with CVE-2022-41973. Local users able to write to UNIX domain sockets can bypass access controls and manipulate the multipath setup. This can lead to local privilege escalation to root. This occurs because an attacker can repeat a keyword, which is mishandled because arithmetic ADD is used instead of bitwise OR.

The Debian shadow package before 1:4.5-1 for Shadow incorrectly lists pts/0 and pts/1 as physical terminals in /etc/securetty. This allows local users to login as password-less users even if they are connected by non-physical means such as SSH (hence bypassing PAM's nullok_secure configuration). This notably affects environments such as virtual machines automatically generated with a default blank root password, allowing all local users to escalate privileges.

Jupyter Core is a package for the core common functionality of Jupyter projects. Jupyter Core prior to version 4.11.2 contains an arbitrary code execution vulnerability in `jupyter_core` that stems from `jupyter_core` executing untrusted files in CWD. This vulnerability allows one user to run code as another. Version 4.11.2 contains a patch for this issue. There are no known workarounds.

autojump before 21.5.8 allows local users to gain privileges via a Trojan horse custom_install directory in the current working directory.

An Access Bypass issue exists in OTRS Help Desk before 3.2.4, 3.1.14, and 3.0.19, OTRS ITSM before 3.2.3, 3.1.8, and 3.0.7, and FAQ before 2.2.3, 2.1.4, and 2.0.8. Access rights by the object linking mechanism is not verified

VMware Tools (12.0.0, 11.x.y and 10.x.y) contains a local privilege escalation vulnerability. A malicious actor with local non-administrative access to the Guest OS can escalate privileges as a root user in the virtual machine.

A Privilege Context Switching issue was discovered in join.c in Firejail 0.9.68. By crafting a bogus Firejail container that is accepted by the Firejail setuid-root program as a join target, a local attacker can enter an environment in which the Linux user namespace is still the initial user namespace, the NO_NEW_PRIVS prctl is not activated, and the entered mount namespace is under the attacker's control. In this way, the filesystem layout can be adjusted to gain root privileges through execution of available setuid-root binaries such as su or sudo.

UC-8100A-ME-T System Image: Versions v1.0 to v1.6, UC-2100 System Image: Versions v1.0 to v1.12, UC-2100-W System Image: Versions v1.0 to v 1.12, UC-3100 System Image: Versions v1.0 to v1.6, UC-5100 System Image: Versions v1.0 to v1.4, UC-8100 System Image: Versions v3.0 to v3.5, UC-8100-ME-T System Image: Versions v3.0 and v3.1, UC-8200 System Image: v1.0 to v1.5, AIG-300 System Image: v1.0 to v1.4, UC-8410A with Debian 9 System Image: Versions v4.0.2 and v4.1.2, UC-8580 with Debian 9 System Image: Versions v2.0 and v2.1, UC-8540 with Debian 9 System Image: Versions v2.0 and v2.1, and DA-662C-16-LX (GLB) System Image: Versions v1.0.2 to v1.1.2 of Moxa's ARM-based computers have an execution with unnecessary privileges vulnerability, which could allow an attacker with user-level privileges to gain root privileges.

net/netfilter/nf_dup_netdev.c in the Linux kernel 5.4 through 5.6.10 allows local users to gain privileges because of a heap out-of-bounds write. This is related to nf_tables_offload.

IPython (Interactive Python) is a command shell for interactive computing in multiple programming languages, originally developed for the Python programming language. Affected versions are subject to an arbitrary code execution vulnerability achieved by not properly managing cross user temporary files. This vulnerability allows one user to run code as another on the same machine. All users are advised to upgrade.

In X.Org Server (aka xserver and xorg-server) before 1.19.4, an attacker authenticated to an X server with the X shared memory extension enabled can cause aborts of the X server or replace shared memory segments of other X clients in the same session.

Flatpak is a Linux application sandboxing and distribution framework. Prior to versions 1.12.3 and 1.10.6, Flatpak doesn't properly validate that the permissions displayed to the user for an app at install time match the actual permissions granted to the app at runtime, in the case that there's a null byte in the metadata file of an app. Therefore apps can grant themselves permissions without the consent of the user. Flatpak shows permissions to the user during install by reading them from the "xa.metadata" key in the commit metadata. This cannot contain a null terminator, because it is an untrusted GVariant. Flatpak compares these permissions to the *actual* metadata, from the "metadata" file to ensure it wasn't lied to. However, the actual metadata contents are loaded in several places where they are read as simple C-style strings. That means that, if the metadata file includes a null terminator, only the content of the file from *before* the terminator gets compared to xa.metadata. Thus, any permissions that appear in the metadata file after a null terminator are applied at runtime but not shown to the user. So maliciously crafted apps can give themselves hidden permissions. Users who have Flatpaks installed from untrusted sources are at risk in case the Flatpak has a maliciously crafted metadata file, either initially or in an update. This issue is patched in versions 1.12.3 and 1.10.6. As a workaround, users can manually check the permissions of installed apps by checking the metadata file or the xa.metadata key on the commit metadata.

Thunderbird unexpectedly enabled JavaScript in the composition area. The JavaScript execution context was limited to this area and did not receive chrome-level privileges, but could be used as a stepping stone to further an attack with other vulnerabilities. This vulnerability affects Thunderbird < 91.4.0.

Jann Horn of Google Project Zero discovered that NTFS-3G, a read-write NTFS driver for FUSE, does not scrub the environment before executing modprobe with elevated privileges. A local user can take advantage of this flaw for local root privilege escalation.

MCabber before 1.0.4 is vulnerable to roster push attacks, which allows remote attackers to intercept communications, or add themselves as an entity on a 3rd party's roster as another user, which will also garner associated privileges, via crafted XMPP packets.

PhoneSystem Terminal in 3CX Phone System (Debian based installation) 16.0.0.1570 allows an attacker to gain root privileges by using sudo with the tcpdump command, without a password. This occurs because the -z (aka postrotate-command) option to tcpdump can be unsafe when used in conjunction with sudo.

An privilege elevation vulnerability exists in Cloud-init before 0.7.0 when requests to an untrusted system are submitted for EC2 instance data.

The pg_ctlcluster script in postgresql-common in versions prior to 210 didn't drop privileges when creating socket/statistics temporary directories, which could result in local privilege escalation.

An issue was discovered in Cyrus IMAP before 2.5.15, 3.0.x before 3.0.13, and 3.1.x through 3.1.8. If sieve script uploading is allowed (3.x) or certain non-default sieve options are enabled (2.x), a user with a mail account on the service can use a sieve script containing a fileinto directive to create any mailbox with administrator privileges, because of folder mishandling in autosieve_createfolder() in imap/lmtp_sieve.c.

A Security Bypass vulnerability exists in the phpCAS 1.2.2 library from the jasig project due to the way proxying of services are managed.

systemd before 247 does not adequately block local privilege escalation for some Sudo configurations, e.g., plausible sudoers files in which the "systemctl status" command may be executed. Specifically, systemd does not set LESSSECURE to 1, and thus other programs may be launched from the less program. This presents a substantial security risk when running systemctl from Sudo, because less executes as root when the terminal size is too small to show the complete systemctl output.

In in wp-includes/rest-api/endpoints/class-wp-rest-posts-controller.php in WordPress 3.7 to 5.3.0, authenticated users who do not have the rights to publish a post are able to mark posts as sticky or unsticky via the REST API. For example, the contributor role does not have such rights, but this allowed them to bypass that. This has been patched in WordPress 5.3.1, along with all the previous WordPress versions from 3.7 to 5.3 via a minor release.

SchedMD Slurm before 18.08.9 and 19.x before 19.05.5 executes srun --uid with incorrect privileges.

A flaw was found in the way qemu v1.3.0 and later (virtio-rng) validates addresses when guest accesses the config space of a virtio device. If the virtio device has zero/small sized config space, such as virtio-rng, a privileged guest user could use this flaw to access the matching host's qemu address space and thus increase their privileges on the host.

Bubblewrap (bwrap) before version 0.4.1, if installed in setuid mode and the kernel supports unprivileged user namespaces, then the `bwrap --userns2` option can be used to make the setuid process keep running as root while being traceable. This can in turn be used to gain root permissions. Note that this only affects the combination of bubblewrap in setuid mode (which is typically used when unprivileged user namespaces are not supported) and the support of unprivileged user namespaces. Known to be affected are: * Debian testing/unstable, if unprivileged user namespaces enabled (not default) * Debian buster-backports, if unprivileged user namespaces enabled (not default) * Arch if using `linux-hardened`, if unprivileged user namespaces enabled (not default) * Centos 7 flatpak COPR, if unprivileged user namespaces enabled (not default) This has been fixed in the 0.4.1 release, and all affected users should update.

The AX.25 daemon (ax25d) in ax25-tools before 0.0.8-13 does not check the return value of a setuid call. The setuid call is responsible for dropping privileges but if the call fails the daemon would continue to run with root privileges which can allow possible privilege escalation.

Insufficient policy enforcement in navigation in Google Chrome prior to 79.0.3945.79 allowed a remote attacker to bypass site isolation via a crafted HTML page.

Enigma NMS 65.0.0 and prior allows administrative users to create low-privileged accounts that do not have the ability to modify any settings in the system, only view the components. However, it is possible for a low-privileged user to perform all actions as an administrator by bypassing authorization controls and sending requests to the server in the context of an administrator.

Bitbucket Server and Bitbucket Data Center from version 4.13. before 5.16.11, from version 6.0.0 before 6.0.11, from version 6.1.0 before 6.1.9, from version 6.2.0 before 6.2.7, from version 6.3.0 before 6.3.6, from version 6.4.0 before 6.4.4, from version 6.5.0 before 6.5.3, from version 6.6.0 before 6.6.3, from version 6.7.0 before 6.7.3, from version 6.8.0 before 6.8.2, from version 6.9.0 before 6.9.1 had a Remote Code Execution vulnerability via the edit-file request. A remote attacker with write permission on a repository can write to any arbitrary file to the victims Bitbucket Server or Bitbucket Data Center instance using the edit-file endpoint, if the user has Bitbucket Server or Bitbucket Data Center running, and has the permission to write the file at that destination. In some cases, this can result in execution of arbitrary code by the victims Bitbucket Server or Bitbucket Data Center instance.

SITOS six Build v6.2.1 allows a user with the user role of Seminar Coordinator to escalate their permission to the Systemadministrator role due to insufficient checks on the server side.

A flaw was found during the upgrade of an existing OpenShift Container Platform 3.x cluster. Using CRI-O, the dockergc service account is assigned to the current namespace of the user performing the upgrade. This flaw can allow an unprivileged user to escalate their privileges to those allowed by the privileged Security Context Constraints.

Improper Privilege Management in GitHub repository microweber/microweber prior to 1.3.4.

A vulnerability in the user profile update component found in the ~/src/Classes/EditUserProfile.php file of the ProfilePress WordPress plugin made it possible for users to escalate their privileges to that of an administrator while editing their profile. This issue affects versions 3.0.0 - 3.1.3. .

A vulnerability in the web UI of Cisco Smart Software Manager On-Prem (SSM On-Prem) could allow an authenticated, remote attacker to elevate privileges and create, read, update, or delete records and settings in multiple functions. This vulnerability is due to insufficient authorization of the System User and System Operator role capabilities. An attacker could exploit this vulnerability by directly accessing a web resource. A successful exploit could allow the attacker to create, read, update, or delete records and settings in multiple functions without the necessary permissions on the web UI.

Improper privilege management vulnerability in cgi component in Synology Download Station before 3.8.16-3566 allows remote authenticated users to execute arbitrary code via unspecified vectors.

Pivotal Apps Manager, included in Pivotal Application Service versions 2.3.x prior to 2.3.18, 2.4.x prior to 2.4.14, 2.5.x prior to 2.5.10, and 2.6.x prior to 2.6.5, contains an invitations microservice which allows users to invite others to their organizations. A remote authenticated user can gain additional privileges by inviting themselves to spaces that they should not have access to.

IBM Event Streams 10.0, 10.1, 10.2, and 10.3 could allow a user the CA private key to create their own certificates and deploy them in the cluster and gain privileges of another user. IBM X-Force ID: 203450.

The Elegant Themes Monarch plugin before 1.2.7 for WordPress has privilege escalation.

A vulnerability has been identified in Mendix Applications using Mendix 7 (All versions < V7.23.19), Mendix Applications using Mendix 8 (All versions < V8.17.0), Mendix Applications using Mendix 8 (V8.12) (All versions < V8.12.5), Mendix Applications using Mendix 8 (V8.6) (All versions < V8.6.9), Mendix Applications using Mendix 9 (All versions < V9.0.5). Authenticated, non-administrative users could modify their privileges by manipulating the user role under certain circumstances, allowing them to gain administrative privileges.

Successful exploitation of this vulnerability could give an authenticated Metasys user an unintended level of access to the server file system, allowing them to access or modify system files by sending specifically crafted web messages to the Metasys system. This issue affects: Johnson Controls Metasys version 11.0 and prior versions.

An improper access control vulnerability has been reported to affect QNAP NAS. If exploited, this vulnerability allows remote attackers to compromise the security of the software. This issue affects: QNAP Systems Inc. Helpdesk versions prior to 3.0.4.

Successful exploitation of this vulnerability could give an authenticated Facility Explorer SNC Series Supervisory Controller (F4-SNC) user an unintended level of access to the controller’s file system, allowing them to access or modify system files by sending specifically crafted web messages to the F4-SNC.

In Directus 8.x through 8.8.1, an attacker can switch to the administrator role (via the PATCH method) without any control by the back end. NOTE: This vulnerability only affects products that are no longer supported by the maintainer

In Octopus Deploy versions 3.2.11 - 4.1.5 (fixed in 4.1.6), an authenticated user with ProcessEdit permission could reference an Azure account in such a way as to bypass the scoping restrictions, resulting in a potential escalation of privileges.

An issue was discovered in Octopus Deploy before 4.1.9. Any user with user editing permissions can modify teams to give themselves Administer System permissions even if they didn't have them, as demonstrated by use of the RoleEdit or TeamEdit permission.

A privilege escalation vulnerability in web component of Ivanti Connect Secure (9.x, 22.x) and Ivanti Policy Secure (9.x, 22.x) allows a user to elevate privileges to that of an administrator.