A vulnerability in the update process for the dynamic JAR file of the Cisco Context Service software development kit (SDK) could allow an unauthenticated, remote attacker to execute arbitrary code on the affected device with the privileges of the web server. More Information: CSCvb66730. Known Affected Releases: 2.0.

A vulnerability in the Play Framework of Cisco Elastic Services Controller (ESC) could allow an unauthenticated, remote attacker to gain full access to the affected system. The vulnerability is due to static, default credentials for the Cisco ESC UI that are shared between installations. An attacker who can extract the static credentials from an existing installation of Cisco ESC could generate an admin session token that allows access to all instances of the ESC web UI. This vulnerability affects Cisco Elastic Services Controller prior to releases 2.3.1.434 and 2.3.2. Cisco Bug IDs: CSCvc76627.

Cisco ACE 4710 Application Control Engine Appliance before A1(8a) uses default (1) usernames and (2) passwords for (a) the administrator, (b) web management, and (c) device management, which makes it easier for remote attackers to perform configuration changes to the Device Manager and other components, or obtain operating-system access.

A vulnerability in the Cisco Cluster Management Protocol (CMP) processing code in Cisco IOS and Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause a reload of an affected device or remotely execute code with elevated privileges. The Cluster Management Protocol utilizes Telnet internally as a signaling and command protocol between cluster members. The vulnerability is due to the combination of two factors: (1) the failure to restrict the use of CMP-specific Telnet options only to internal, local communications between cluster members and instead accept and process such options over any Telnet connection to an affected device; and (2) the incorrect processing of malformed CMP-specific Telnet options. An attacker could exploit this vulnerability by sending malformed CMP-specific Telnet options while establishing a Telnet session with an affected Cisco device configured to accept Telnet connections. An exploit could allow an attacker to execute arbitrary code and obtain full control of the device or cause a reload of the affected device. This affects Catalyst switches, Embedded Service 2020 switches, Enhanced Layer 2 EtherSwitch Service Module, Enhanced Layer 2/3 EtherSwitch Service Module, Gigabit Ethernet Switch Module (CGESM) for HP, IE Industrial Ethernet switches, ME 4924-10GE switch, RF Gateway 10, and SM-X Layer 2/3 EtherSwitch Service Module. Cisco Bug IDs: CSCvd48893.

A vulnerability in Cisco Aironet 1830 Series and Cisco Aironet 1850 Series Access Points running Cisco Mobility Express Software could allow an unauthenticated, remote attacker to take complete control of an affected device. The vulnerability is due to the existence of default credentials for an affected device that is running Cisco Mobility Express Software, regardless of whether the device is configured as a master, subordinate, or standalone access point. An attacker who has layer 3 connectivity to an affected device could use Secure Shell (SSH) to log in to the device with elevated privileges. A successful exploit could allow the attacker to take complete control of the device. This vulnerability affects Cisco Aironet 1830 Series and Cisco Aironet 1850 Series Access Points that are running an 8.2.x release of Cisco Mobility Express Software prior to Release 8.2.111.0, regardless of whether the device is configured as a master, subordinate, or standalone access point. Release 8.2 was the first release of Cisco Mobility Express Software for next generation Cisco Aironet Access Points. Cisco Bug IDs: CSCva50691.

A vulnerability in the web-based GUI of Cisco Mobility Express 1800 Series Access Points could allow an unauthenticated, remote attacker to bypass authentication. The attacker could be granted full administrator privileges. The vulnerability is due to improper implementation of authentication for accessing certain web pages using the GUI interface. An attacker could exploit this vulnerability by sending a crafted HTTP request to the web interface of the affected system. A successful exploit could allow the attacker to bypass authentication and perform unauthorized configuration changes or issue control commands to the affected device. This vulnerability affects Cisco Mobility Express 1800 Series Access Points running a software version prior to 8.2.110.0. Cisco Bug IDs: CSCuy68219.

Cisco Application Networking Manager (ANM) before 2.0 uses default usernames and passwords, which makes it easier for remote attackers to access the application, or cause a denial of service via configuration changes, related to "default user credentials during installation."

Cisco ACE Application Control Engine Module for Catalyst 6500 Switches and 7600 Routers before A2(1.1) uses default (1) usernames and (2) passwords for (a) the administrator and (b) web management, which makes it easier for remote attackers to perform configuration changes or obtain operating-system access.

An unspecified CGI script in Cisco FX-OS before 1.1.2 on Firepower 9000 devices and Cisco Unified Computing System (UCS) Manager before 2.2(4b), 2.2(5) before 2.2(5a), and 3.0 before 3.0(2e) allows remote attackers to execute arbitrary shell commands via a crafted HTTP request, aka Bug ID CSCur90888.

The Cisco Linksys WVC54GC wireless video camera before firmware 1.25 sends cleartext configuration data in response to a Setup Wizard remote-management command, which allows remote attackers to obtain sensitive information such as passwords by sniffing the network.

Cisco CiscoWorks Internetwork Performance Monitor (IPM) 2.6 creates a process that executes a command shell and listens on a randomly chosen TCP port, which allows remote attackers to execute arbitrary commands.

The Disaster Recovery Framework (DRF) master server in Cisco Unified Communications products, including Unified Communications Manager (CUCM) 5.x and 6.x, Unified Presence 1.x and 6.x, Emergency Responder 2.x, and Mobility Manager 2.x, does not require authentication for requests received from the network, which allows remote attackers to execute arbitrary code via unspecified vectors.

Cisco Network Admission Control (NAC) Appliance 3.5.x, 3.6.x before 3.6.4.4, 4.0.x before 4.0.6, and 4.1.x before 4.1.2 allows remote attackers to obtain the shared secret for the Clean Access Server (CAS) and Clean Access Manager (CAM) by sniffing error logs.

Heap-based buffer overflow in the Certificate Trust List (CTL) Provider service (CTLProvider.exe) in Cisco Unified Communications Manager (CUCM) 4.2 before 4.2(3)SR3 and 4.3 before 4.3(1)SR1, and CallManager 4.0 and 4.1 before 4.1(3)SR5c, allows remote attackers to cause a denial of service or execute arbitrary code via a long request.

Multiple buffer overflows in securecgi-bin/CSuserCGI.exe in User-Changeable Password (UCP) before 4.2 in Cisco Secure Access Control Server (ACS) for Windows and ACS Solution Engine allow remote attackers to execute arbitrary code via a long argument located immediately after the Logout argument, and possibly unspecified other vectors.

Buffer overflow in Cisco Unified IP Phone 7940, 7940G, 7960, and 7960G running SCCP and SIP firmware might allow remote attackers to execute arbitrary code via a crafted DNS response.

Buffer overflow in the telnet server in Cisco Unified IP Phone 7906G, 7911G, 7941G, 7961G, 7970G, and 7971G running SCCP firmware might allow remote authenticated users to execute arbitrary code via a crafted command.

SNMPv3 HMAC verification in (1) Net-SNMP 5.2.x before 5.2.4.1, 5.3.x before 5.3.2.1, and 5.4.x before 5.4.1.1; (2) UCD-SNMP; (3) eCos; (4) Juniper Session and Resource Control (SRC) C-series 1.0.0 through 2.0.0; (5) NetApp (aka Network Appliance) Data ONTAP 7.3RC1 and 7.3RC2; (6) SNMP Research before 16.2; (7) multiple Cisco IOS, CatOS, ACE, and Nexus products; (8) Ingate Firewall 3.1.0 and later and SIParator 3.1.0 and later; (9) HP OpenView SNMP Emanate Master Agent 15.x; and possibly other products relies on the client to specify the HMAC length, which makes it easier for remote attackers to bypass SNMP authentication via a length value of 1, which only checks the first byte.

Buffer overflow in the Centralized TFTP File Locator Service in Cisco Unified Communications Manager (CUCM, formerly CallManager) 5.1 before 5.1(3), and Unified CallManager 5.0, allows remote attackers to execute arbitrary code or cause a denial of service via unspecified vectors involving the processing of filenames, aka CSCsh47712.

Buffer overflow in ldcconn in Hewlett-Packard (HP) Controller for Cisco Local Director on HP-UX 11.11i allows remote attackers to execute arbitrary code via a long string to TCP port 17781.

Cisco TelePresence Manager 1.2.x through 1.6.x allows remote attackers to perform unspecified actions and consequently execute arbitrary code via a crafted request to the Java RMI interface, related to a "command injection vulnerability," aka Bug ID CSCtf97085.

The SNMP implementation in the Cisco Wireless LAN Controller (WLC) before 20070419 uses the default read-only community public, and the default read-write community private, which allows remote attackers to read and modify SNMP variables, aka Bug ID CSCse02384.

Cisco Network Services (CNS) NetFlow Collection Engine (NFC) before 6.0 has an nfcuser account with the default password nfcuser, which allows remote attackers to modify the product configuration and, when installed on Linux, obtain login access to the host operating system.

Unspecified vulnerability in Cisco Adaptive Security Appliance (ASA) and PIX 7.2 before 7.2(2)8, when using Layer 2 Tunneling Protocol (L2TP) or Remote Management Access, allows remote attackers to bypass LDAP authentication and gain privileges via unknown vectors.

The SSH server in Cisco Unified IP Phone 7906G, 7911G, 7941G, 7961G, 7970G, and 7971G, with firmware 8.0(4)SR1 and earlier, uses a hard-coded username and password, which allows remote attackers to access the device.

A vulnerability in the REST API of Cisco Elastic Services Controller (ESC) could allow an unauthenticated, remote attacker to bypass authentication on the REST API. The vulnerability is due to improper validation of API requests. An attacker could exploit this vulnerability by sending a crafted request to the REST API. A successful exploit could allow the attacker to execute arbitrary actions through the REST API with administrative privileges on an affected system.

The Cisco Unified IP Conference Station 7935 3.2(15) and earlier, and Station 7936 3.3(12) and earlier does not properly handle administrator HTTP sessions, which allows remote attackers to bypass authentication controls via a direct URL request to the administrative HTTP interface for a limited time

The Network Analysis Module (NAM) in Cisco Catalyst Series 6000, 6500, and 7600 allows remote attackers to execute arbitrary commands via certain SNMP packets that are spoofed from the NAM's own IP address.

Multiple stack-based buffer overflows in agent.exe in Setup Manager in Cisco Intelligent Contact Manager (ICM) before 7.0 allow remote attackers to execute arbitrary code via a long parameter in a (1) HandleUpgradeAll, (2) AgentUpgrade, (3) HandleQueryNodeInfoReq, or (4) HandleUpgradeTrace TCP packet, aka Bug IDs CSCti45698, CSCti45715, CSCti45726, and CSCti46164.

Cisco Clean Access (CCA) 3.6.x through 3.6.4.2 and 4.0.x through 4.0.3.2 does not properly configure or allow modification of a shared secret authentication key, which causes all devices to have the same shared sercet and allows remote attackers to gain unauthorized access.

Multiple vulnerabilities in the web management interface of Cisco Small Business 220 Series Smart Switches could allow an unauthenticated, remote attacker to overflow a buffer, which then allows the execution of arbitrary code with root privileges on the underlying operating system. The vulnerabilities are due to insufficient validation of user-supplied input and improper boundary checks when reading data into an internal buffer. An attacker could exploit these vulnerabilities by sending malicious requests to the web management interface of an affected device. Depending on the configuration of the affected switch, the malicious requests must be sent via HTTP or HTTPS.

A vulnerability in the web-based management interface of Cisco Integrated Management Controller (IMC) Supervisor, Cisco UCS Director, and Cisco UCS Director Express for Big Data could allow an unauthenticated, remote attacker to acquire a valid session token with administrator privileges, bypassing user authentication. The vulnerability is due to insufficient request header validation during the authentication process. An attacker could exploit this vulnerability by sending a series of malicious requests to an affected device. An exploit could allow the attacker to use the acquired session token to gain full administrator access to the affected device.

Cisco Adaptive Security Appliances (ASA) 5580 series devices with software before 8.1(2) complete an SSL handshake with an HTTPS client even if this client is unauthorized, which might allow remote attackers to bypass intended access restrictions via an HTTPS session, aka Bug ID CSCso10876.

Cisco IOS 12.2 through 12.4 before 20060920, as used by Cisco IAD2430, IAD2431, and IAD2432 Integrated Access Devices, the VG224 Analog Phone Gateway, and the MWR 1900 and 1941 Mobile Wireless Edge Routers, is incorrectly identified as supporting DOCSIS, which allows remote attackers to gain read-write access via a hard-coded cable-docsis community string and read or modify arbitrary SNMP variables.

A vulnerability in the sysadmin virtual machine (VM) on Cisco ASR 9000 Series Aggregation Services Routers running Cisco IOS XR 64-bit Software could allow an unauthenticated, remote attacker to access internal applications running on the sysadmin VM. The vulnerability is due to incorrect isolation of the secondary management interface from internal sysadmin applications. An attacker could exploit this vulnerability by connecting to one of the listening internal applications. A successful exploit could result in unstable conditions, including both a denial of service and remote unauthenticated access to the device. This vulnerability has been fixed in Cisco IOS XR 64-bit Software Release 6.5.3 and 7.0.1, which will edit the calvados_boostrap.cfg file and reload the device.

Cisco 2700 Series Wireless Location Appliances before 2.1.34.0 have a default administrator username "root" and password "password," which allows remote attackers to obtain administrative privileges, aka Bug ID CSCsb92893.

A vulnerability in the web-based management interface of Cisco Firepower Management Center (FMC) could allow an unauthenticated, remote attacker to bypass authentication and execute arbitrary actions with administrative privileges on an affected device. The vulnerability is due to improper handling of Lightweight Directory Access Protocol (LDAP) authentication responses from an external authentication server. An attacker could exploit this vulnerability by sending crafted HTTP requests to an affected device. A successful exploit could allow the attacker to gain administrative access to the web-based management interface of the affected device.

Unspecified vulnerability on the Cisco Wireless LAN Controller (WLC) platform 4.x before 4.2.205.0 and 5.x before 5.2.191.0, as used in Cisco 1500 Series, 2000 Series, 2100 Series, 4100 Series, 4200 Series, and 4400 Series Wireless Services Modules (WiSM), WLC Modules for Integrated Services Routers, and Catalyst 3750G Integrated Wireless LAN Controllers, allows remote attackers to modify the configuration via a crafted (1) HTTP or (2) HTTPS request, aka Bug ID CSCsy44672.

Multiple vulnerabilities in the authentication mechanisms of Cisco Data Center Network Manager (DCNM) could allow an unauthenticated, remote attacker to bypass authentication and execute arbitrary actions with administrative privileges on an affected device. For more information about these vulnerabilities, see the Details section of this advisory.

A vulnerability in the web-based management interface of Cisco Data Center Network Manager (DCNM) could allow an unauthenticated, remote attacker to bypass authentication and execute arbitrary actions with administrative privileges on an affected device. The vulnerability is due to improper session management on affected DCNM software. An attacker could exploit this vulnerability by sending a crafted HTTP request to the affected device. A successful exploit could allow the attacker to gain administrative access on the affected device.

Multiple vulnerabilities in the authentication mechanisms of Cisco Data Center Network Manager (DCNM) could allow an unauthenticated, remote attacker to bypass authentication and execute arbitrary actions with administrative privileges on an affected device. For more information about these vulnerabilities, see the Details section of this advisory.

The Cisco Linksys WRT350N with firmware 1.0.3.7 has "admin" as its default password for the "admin" account, which makes it easier for remote attackers to obtain access.

The default installation of Cisco voice products, when running the IBM Director Agent on IBM servers before OS 2000.2.6, does not require authentication, which allows remote attackers to gain administrator privileges by connecting to TCP port 14247.

Cisco Secure Access Control Server for Windows (ACS Windows) and Cisco Secure Access Control Server Solution Engine (ACS Solution Engine) 3.3.1, when the EAP-TLS protocol is enabled, does not properly handle expired or untrusted certificates, which allows remote attackers to bypass authentication and gain unauthorized access via a "cryptographically correct" certificate with valid fields such as the username.

Buffer overflow in Cisco Unified IP Phone 7940, 7940G, 7960, and 7960G running SIP firmware might allow remote attackers to execute arbitrary code via a SIP message with crafted MIME data.

Cisco Application Velocity System (AVS) before 5.1.0 is installed with default passwords for some system accounts, which allows remote attackers to gain privileges.

A vulnerability in the quality of service (QoS) subsystem of Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition or execute arbitrary code with elevated privileges. The vulnerability is due to incorrect bounds checking of certain values in packets that are destined for UDP port 18999 of an affected device. An attacker could exploit this vulnerability by sending malicious packets to an affected device. When the packets are processed, an exploitable buffer overflow condition may occur. A successful exploit could allow the attacker to execute arbitrary code on the affected device with elevated privileges. The attacker could also leverage this vulnerability to cause the device to reload, causing a temporary DoS condition while the device is reloading. The malicious packets must be destined to and processed by an affected device. Traffic transiting a device will not trigger the vulnerability. Cisco Bug IDs: CSCvf73881.

Buffer overflow in a certain driver in Cisco Security Agent 4.5.1 before 4.5.1.672, 5.0 before 5.0.0.225, 5.1 before 5.1.0.106, and 5.2 before 5.2.0.238 on Windows allows remote attackers to execute arbitrary code via a crafted SMB packet in a TCP session on port (1) 139 or (2) 445.

The conversion utility for converting CiscoWorks Wireless LAN Solution Engine (WLSE) 4.1.91.0 and earlier to Cisco Wireless Control System (WCS) creates administrator accounts with default usernames and passwords, which allows remote attackers to gain privileges.