A vulnerability, which was classified as critical, has been found in TOTOLINK A702R, A3002R and A3002RU 3.0.0-B20230809.1615. This issue affects some unknown processing of the file /boafrm/formWirelessTbl of the component HTTP POST Request Handler. The manipulation of the argument submit-url leads to buffer overflow. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used.

A vulnerability classified as critical was found in TOTOLINK A702R, A3002R and A3002RU 3.0.0-B20230809.1615. This vulnerability affects unknown code of the file /boafrm/formDMZ of the component HTTP POST Request Handler. The manipulation of the argument submit-url leads to buffer overflow. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used.

A vulnerability was found in D-Link DCS-932L 2.18.01. It has been classified as critical. This affects the function SubUPnPCSInit of the file /sbin/udev. The manipulation of the argument CameraName leads to stack-based buffer overflow. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability was found in TOTOLINK A702R, A3002R and A3002RU 3.0.0-B20230809.1615. It has been rated as critical. Affected by this issue is the function submit-url of the file /boafrm/formReflashClientTbl of the component HTTP POST Request Handler. The manipulation leads to buffer overflow. The attack may be launched remotely. The exploit has been disclosed to the public and may be used.

A vulnerability was found in Tenda AC7 15.03.06.44. It has been classified as critical. Affected is the function fromSafeSetMacFilter of the file /goform/setMacFilterCfg. The manipulation of the argument deviceList leads to stack-based buffer overflow. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used.

The Simple Network Management Protocol (SNMP) subsystem of Cisco IOS and IOS XE Software contains multiple vulnerabilities that could allow an authenticated, remote attacker to remotely execute code on an affected system or cause an affected system to reload. An attacker could exploit these vulnerabilities by sending a crafted SNMP packet to an affected system via IPv4 or IPv6. Only traffic directed to an affected system can be used to exploit these vulnerabilities. The vulnerabilities are due to a buffer overflow condition in the SNMP subsystem of the affected software. The vulnerabilities affect all versions of SNMP - Versions 1, 2c, and 3. To exploit these vulnerabilities via SNMP Version 2c or earlier, the attacker must know the SNMP read-only community string for the affected system. To exploit these vulnerabilities via SNMP Version 3, the attacker must have user credentials for the affected system. A successful exploit could allow the attacker to execute arbitrary code and obtain full control of the affected system or cause the affected system to reload. Customers are advised to apply the workaround as contained in the Workarounds section below. Fixed software information is available via the Cisco IOS Software Checker. All devices that have enabled SNMP and have not explicitly excluded the affected MIBs or OIDs should be considered vulnerable. There are workarounds that address these vulnerabilities.

The Simple Network Management Protocol (SNMP) subsystem of Cisco IOS and IOS XE Software contains multiple vulnerabilities that could allow an authenticated, remote attacker to remotely execute code on an affected system or cause an affected system to reload. An attacker could exploit these vulnerabilities by sending a crafted SNMP packet to an affected system via IPv4 or IPv6. Only traffic directed to an affected system can be used to exploit these vulnerabilities. The vulnerabilities are due to a buffer overflow condition in the SNMP subsystem of the affected software. The vulnerabilities affect all versions of SNMP - Versions 1, 2c, and 3. To exploit these vulnerabilities via SNMP Version 2c or earlier, the attacker must know the SNMP read-only community string for the affected system. To exploit these vulnerabilities via SNMP Version 3, the attacker must have user credentials for the affected system. A successful exploit could allow the attacker to execute arbitrary code and obtain full control of the affected system or cause the affected system to reload. Customers are advised to apply the workaround as contained in the Workarounds section below. Fixed software information is available via the Cisco IOS Software Checker. All devices that have enabled SNMP and have not explicitly excluded the affected MIBs or OIDs should be considered vulnerable. There are workarounds that address these vulnerabilities.

A vulnerability was found in D-Link DCS-932L 2.18.01. It has been declared as critical. This vulnerability affects the function isUCPCameraNameChanged of the file /sbin/ucp. The manipulation of the argument CameraName leads to stack-based buffer overflow. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability was found in Tenda AC7 15.03.06.44. It has been declared as critical. Affected by this vulnerability is the function formSetRebootTimer of the file /goform/SetRebootTimer. The manipulation of the argument reboot_time leads to stack-based buffer overflow. The attack can be launched remotely. The exploit has been disclosed to the public and may be used.

A vulnerability, which was classified as critical, was found in TOTOLINK A702R, A3002R and A3002RU 3.0.0-B20230809.1615. This affects an unknown part of the file /boafrm/formSiteSurveyProfile of the component HTTP POST Request Handler. The manipulation of the argument submit-url leads to buffer overflow. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used.

A vulnerability classified as critical has been found in TOTOLINK A702R, A3002R and A3002RU 3.0.0-B20230809.1615. This affects an unknown part of the file /boafrm/formWsc of the component HTTP POST Request Handler. The manipulation of the argument submit-url leads to buffer overflow. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used.

The Simple Network Management Protocol (SNMP) subsystem of Cisco IOS and IOS XE Software contains multiple vulnerabilities that could allow an authenticated, remote attacker to remotely execute code on an affected system or cause an affected system to reload. An attacker could exploit these vulnerabilities by sending a crafted SNMP packet to an affected system via IPv4 or IPv6. Only traffic directed to an affected system can be used to exploit these vulnerabilities. The vulnerabilities are due to a buffer overflow condition in the SNMP subsystem of the affected software. The vulnerabilities affect all versions of SNMP - Versions 1, 2c, and 3. To exploit these vulnerabilities via SNMP Version 2c or earlier, the attacker must know the SNMP read-only community string for the affected system. To exploit these vulnerabilities via SNMP Version 3, the attacker must have user credentials for the affected system. A successful exploit could allow the attacker to execute arbitrary code and obtain full control of the affected system or cause the affected system to reload. Customers are advised to apply the workaround as contained in the Workarounds section below. Fixed software information is available via the Cisco IOS Software Checker. All devices that have enabled SNMP and have not explicitly excluded the affected MIBs or OIDs should be considered vulnerable. There are workarounds that address these vulnerabilities.

A vulnerability, which was classified as critical, has been found in TOTOLINK A702R, A3002R and A3002RU 3.0.0-B20230809.1615. Affected by this issue is some unknown functionality of the file /boafrm/formSysCmd of the component HTTP POST Request Handler. The manipulation of the argument submit-url leads to buffer overflow. The attack may be launched remotely. The exploit has been disclosed to the public and may be used.

A vulnerability has been found in TOTOLINK A702R, A3002R and A3002RU 3.0.0-B20230809.1615 and classified as critical. This vulnerability affects unknown code of the file /boafrm/formDosCfg of the component HTTP POST Request Handler. The manipulation of the argument submit-url leads to buffer overflow. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used.

A vulnerability was found in TOTOLINK A702R, A3002R and A3002RU 3.0.0-B20230809.1615 and classified as critical. This issue affects some unknown processing of the file /boafrm/formNtp of the component HTTP POST Request Handler. The manipulation of the argument submit-url leads to buffer overflow. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used.

Stack-based buffer overflow in the reslist function in ntpq in NTP before 4.2.8p10 and 4.3.x before 4.3.94 allows remote servers have unspecified impact via a long flagstr variable in a restriction list response.

A vulnerability was found in Tenda A15 15.13.07.09/15.13.07.13. It has been classified as critical. This affects an unknown part of the file /goform/multimodalAdd of the component HTTP POST Request Handler. The manipulation leads to buffer overflow. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used.

A vulnerability, which was classified as critical, has been found in TOTOLINK A3002R and A3002RU 3.0.0-B20230809.1615. This issue affects some unknown processing of the file /boafrm/formIpQoS of the component HTTP POST Request Handler. The manipulation of the argument mac leads to buffer overflow. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used.

A vulnerability classified as critical was found in TOTOLINK A3002R and A3002RU 3.0.0-B20230809.1615. This vulnerability affects unknown code of the file /boafrm/formFilter of the component HTTP POST Request Handler. The manipulation of the argument ip6addr leads to buffer overflow. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used.

The Simple Network Management Protocol (SNMP) subsystem of Cisco IOS and IOS XE Software contains multiple vulnerabilities that could allow an authenticated, remote attacker to remotely execute code on an affected system or cause an affected system to reload. An attacker could exploit these vulnerabilities by sending a crafted SNMP packet to an affected system via IPv4 or IPv6. Only traffic directed to an affected system can be used to exploit these vulnerabilities. The vulnerabilities are due to a buffer overflow condition in the SNMP subsystem of the affected software. The vulnerabilities affect all versions of SNMP - Versions 1, 2c, and 3. To exploit these vulnerabilities via SNMP Version 2c or earlier, the attacker must know the SNMP read-only community string for the affected system. To exploit these vulnerabilities via SNMP Version 3, the attacker must have user credentials for the affected system. A successful exploit could allow the attacker to execute arbitrary code and obtain full control of the affected system or cause the affected system to reload. Customers are advised to apply the workaround as contained in the Workarounds section below. Fixed software information is available via the Cisco IOS Software Checker. All devices that have enabled SNMP and have not explicitly excluded the affected MIBs or OIDs should be considered vulnerable. There are workarounds that address these vulnerabilities.

A vulnerability in the SNMP implementation of could allow an authenticated, remote attacker to cause a reload of the affected system or to remotely execute code. An attacker could exploit this vulnerability by sending a crafted SNMP packet to the affected device.  The vulnerability is due to a buffer overflow in the affected code area. The vulnerability affects all versions of SNMP (versions 1, 2c, and 3). The attacker must know the SNMP read only community string (SNMP version 2c or earlier) or the user credentials (SNMPv3). An exploit could allow the attacker to execute arbitrary code and obtain full control of the system or to cause a reload of the affected system. Only traffic directed to the affected system can be used to exploit this vulnerability.

A vulnerability classified as critical has been found in TOTOLINK A3002R and A3002RU 3.0.0-B20230809.1615. This affects an unknown part of the file /boafrm/formPortFw of the component HTTP POST Request Handler. The manipulation of the argument service_type/ip_subnet leads to buffer overflow. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used.

A vulnerability in the SNMP implementation of could allow an authenticated, remote attacker to cause a reload of the affected system or to remotely execute code. An attacker could exploit this vulnerability by sending a crafted SNMP packet to the affected device.  The vulnerability is due to a buffer overflow in the affected code area. The vulnerability affects all versions of SNMP (versions 1, 2c, and 3). The attacker must know the SNMP read only community string (SNMP version 2c or earlier) or the user credentials (SNMPv3). An exploit could allow the attacker to execute arbitrary code and obtain full control of the system or to cause a reload of the affected system. Only traffic directed to the affected system can be used to exploit this vulnerability.

A heap overflow vulnerability in Citrix NetScaler Gateway versions 10.1 before 135.8/135.12, 10.5 before 65.11, 11.0 before 70.12, and 11.1 before 52.13 allows a remote authenticated attacker to run arbitrary commands via unspecified vectors.

A vulnerability, which was classified as critical, was found in D-Link DIR-600L up to 2.07B01. This affects the function formLogin. The manipulation of the argument host leads to buffer overflow. It is possible to initiate the attack remotely. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability classified as critical was found in D-Link DIR-619L 2.04B04. This vulnerability affects the function formEasySetupWizard. The manipulation of the argument curTime leads to buffer overflow. The attack can be initiated remotely. The vendor was contacted early about this disclosure. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability was found in TOTOLINK T10, A3100R, A950RG, A800R, N600R, A3000RU and A810R 4.1.8cu.5241_B20210927. It has been declared as critical. This vulnerability affects the function CloudACMunualUpdate of the file /cgi-bin/cstecgi.cgi. The manipulation of the argument FileName leads to buffer overflow. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used.

A vulnerability, which was classified as critical, has been found in TOTOLINK N150RT 3.4.0-B20190525. This issue affects some unknown processing of the file /boafrm/formWsc. The manipulation of the argument localPin leads to buffer overflow. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used.

A vulnerability was found in D-Link DIR-600L up to 2.07B01. It has been classified as critical. Affected is the function formSetWAN_Wizard534. The manipulation of the argument host leads to buffer overflow. It is possible to launch the attack remotely. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability, which was classified as critical, has been found in D-Link DIR-619L 2.04B04. This issue affects the function formEasySetupWizard3. The manipulation of the argument wan_connected leads to buffer overflow. The attack may be initiated remotely. The vendor was contacted early about this disclosure. This vulnerability only affects products that are no longer supported by the maintainer.

Heap-based buffer overflow in IBM WebSphere MQ 6.0 before 6.0.2.11 and 7.0 before 7.0.1.5 allows remote authenticated users to execute arbitrary code or cause a denial of service (queue manager crash) by inserting an invalid message into the queue.

A vulnerability, which was classified as critical, was found in D-Link DIR-619L 2.04B04. Affected is the function formSetEasy_Wizard. The manipulation of the argument curTime leads to buffer overflow. It is possible to launch the attack remotely. The vendor was contacted early about this disclosure. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability, which was classified as critical, was found in Tenda AC8 16.03.34.06. Affected is the function formGetRouterStatus of the file /goform/MtuSetMacWan. The manipulation of the argument shareSpeed leads to buffer overflow. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used.

A vulnerability was found in D-Link DIR-605L 2.13B01. It has been declared as critical. This vulnerability affects the function formSetWAN_Wizard55. The manipulation of the argument curTime leads to buffer overflow. The attack can be initiated remotely. The vendor was contacted early about this disclosure. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability was found in D-Link DIR-619L 2.04B04 and classified as critical. Affected by this issue is the function formSetWizard2. The manipulation of the argument curTime leads to buffer overflow. The attack may be launched remotely. The vendor was contacted early about this disclosure. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability was found in Tenda DAP-1520 1.10B04_BETA02. It has been classified as critical. This affects the function set_ws_action of the file /dws/api/. The manipulation leads to heap-based buffer overflow. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used.

A vulnerability, which was classified as critical, has been found in D-Link DIR-600L up to 2.07B01. Affected by this issue is the function formEasySetupWizard3. The manipulation of the argument host leads to buffer overflow. The attack may be launched remotely. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability was found in Tenda DAP-1520 1.10B04_BETA02 and classified as critical. Affected by this issue is the function check_dws_cookie of the file /storage. The manipulation leads to stack-based buffer overflow. The attack may be launched remotely. The exploit has been disclosed to the public and may be used.

A vulnerability was found in D-Link DIR-600L up to 2.07B01. It has been declared as critical. Affected by this vulnerability is the function formWlSiteSurvey. The manipulation of the argument host leads to buffer overflow. The attack can be launched remotely. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability was found in Tenda DAP-1520 1.10B04_BETA02. It has been declared as critical. This vulnerability affects the function mod_graph_auth_uri_handler of the file /storage of the component Authentication Handler. The manipulation leads to stack-based buffer overflow. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used.

A vulnerability was found in D-Link DIR-600L up to 2.07B01. It has been rated as critical. Affected by this issue is the function formSetWanL2TP. The manipulation of the argument host leads to buffer overflow. The attack may be launched remotely. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability was found in D-Link DIR-605L 2.13B01. It has been classified as critical. This affects the function formSetWAN_Wizard534. The manipulation of the argument curTime leads to buffer overflow. It is possible to initiate the attack remotely. The vendor was contacted early about this disclosure. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability was found in D-Link DIR-600L up to 2.07B01 and classified as critical. This issue affects the function formSetLog. The manipulation of the argument host leads to buffer overflow. The attack may be initiated remotely. This vulnerability only affects products that are no longer supported by the maintainer.

Multiple stack-based buffer overflows in the IMAP server component in GroupWise Internet Agent (GWIA) in Novell GroupWise before 8.02HP allow remote attackers to execute arbitrary code via a long (1) LIST or (2) LSUB command.

A vulnerability has been found in D-Link DIR-600L up to 2.07B01 and classified as critical. This vulnerability affects the function formEasySetupWizard. The manipulation of the argument host leads to buffer overflow. The attack can be initiated remotely. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability was found in Netgear EX6200 1.0.3.94. It has been declared as critical. This vulnerability affects the function sub_54340. The manipulation of the argument host leads to buffer overflow. The attack can be initiated remotely. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability, which was classified as critical, has been found in TOTOLINK N150RT 3.4.0-B20190525. Affected by this issue is some unknown functionality of the file /boafrm/formVlan. The manipulation of the argument submit-url leads to buffer overflow. The attack may be launched remotely. The exploit has been disclosed to the public and may be used.

A vulnerability classified as critical was found in Tenda W12 and i24 3.0.0.4(2887)/3.0.0.5(3644). Affected by this vulnerability is the function cgidhcpsCfgSet of the file /goform/modules of the component httpd. The manipulation of the argument json leads to stack-based buffer overflow. The attack can be launched remotely. The exploit has been disclosed to the public and may be used.

Buffer overflows in (1) circle_poly, (2) path_encode and (3) path_add (also incorrectly identified as path_addr) for PostgreSQL 7.2.3 and earlier allow attackers to cause a denial of service and possibly execute arbitrary code, possibly as a result of an integer overflow.

A vulnerability has been found in Netgear EX6200 1.0.3.94 and classified as critical. Affected by this vulnerability is the function sub_47F7C. The manipulation of the argument host leads to buffer overflow. The attack can be launched remotely. The vendor was contacted early about this disclosure but did not respond in any way.