Wi-Fi Protected Access (WPA and WPA2) allows reinstallation of the Tunneled Direct-Link Setup (TDLS) Peer Key (TPK) during the TDLS handshake, allowing an attacker within radio range to replay, decrypt, or spoof frames.

Wi-Fi Protected Access (WPA and WPA2) allows reinstallation of the Station-To-Station-Link (STSL) Transient Key (STK) during the PeerKey handshake, allowing an attacker within radio range to replay, decrypt, or spoof frames.

Wi-Fi Protected Access (WPA and WPA2) allows reinstallation of the Pairwise Transient Key (PTK) Temporal Key (TK) during the four-way handshake, allowing an attacker within radio range to replay, decrypt, or spoof frames.

The DiagnosticsHandler in JGroup 3.0.x, 3.1.x, 3.2.x before 3.2.9, and 3.3.x before 3.3.3 allows remote attackers to obtain sensitive information (diagnostic information) and execute arbitrary code by reusing valid credentials.

Spice, versions 0.5.2 through 0.14.1, are vulnerable to an out-of-bounds read due to an off-by-one error in memslot_get_virt. This may lead to a denial of service, or, in the worst case, code-execution by unauthenticated attackers.

It was found that cephx authentication protocol did not verify ceph clients correctly and was vulnerable to replay attack. Any attacker having access to ceph cluster network who is able to sniff packets on network can use this vulnerability to authenticate with ceph service and perform actions allowed by ceph service. Ceph branches master, mimic, luminous and jewel are believed to be vulnerable.

A missing permission check was found in The CLI in JBoss Operations Network before 2.3.1 does not properly check permissions, which allows JBoss ON users to perform management tasks and configuration changes with the privileges of the administrator user.

The poll_mode_io file for the megaraid_sas driver in the Linux kernel 2.6.31.6 and earlier has world-writable permissions, which allows local users to change the I/O mode of the driver by modifying this file.

IBM Robotic Process Automation for Cloud Pak 21.0.1 through 21.0.4 could allow a local user to perform unauthorized actions due to insufficient permission settings. IBM X-Force ID: 244073.

An insecure modification vulnerability flaw was found in containers using nmstate/kubernetes-nmstate-handler. An attacker with access to the container could use this flaw to modify /etc/passwd and escalate their privileges. Versions before kubernetes-nmstate-handler-container-v2.3.0-30 are affected.

A vulnerability was found in all openshift/mediawiki 4.x.x versions prior to 4.3.0, where an insecure modification vulnerability in the /etc/passwd file was found in the openshift/mediawiki. An attacker with access to the container could use this flaw to modify /etc/passwd and escalate their privileges.

A vulnerability was found in openshift/template-service-broker-operator in all 4.x.x versions prior to 4.3.0, where an insecure modification vulnerability in the /etc/passwd file was found in the openshift/template-service-broker-operator. An attacker with access to the container could use this flaw to modify /etc/passwd and escalate their privileges.

A flaw was found in Soteria before 1.0.1, in a way that multiple requests occurring concurrently causing security identity corruption across concurrent threads when using EE Security with WildFly Elytron which can lead to the possibility of being handled using the identity from another request.

A flaw was found in Ansible Engine when a file is moved using atomic_move primitive as the file mode cannot be specified. This sets the destination files world-readable if the destination file does not exist and if the file exists, the file could be changed to have less restrictive permissions before the move. This could lead to the disclosure of sensitive data. All versions in 2.7.x, 2.8.x and 2.9.x branches are believed to be vulnerable.

It has been found that in openshift-enterprise version 3.11 and openshift-enterprise versions 4.1 up to, including 4.3, multiple containers modify the permissions of /etc/passwd to make them modifiable by users other than root. An attacker with access to the running container can exploit this to modify /etc/passwd to add a user and escalate their privileges. This CVE is specific to the openshift/apb-tools-container.

An improper access control flaw was found in Candlepin. An attacker can create data scoped under another customer/tenant, which can result in loss of confidentiality and availability for the affected customer/tenant.

An insecure modification vulnerability in the /etc/passwd file was found in all versions of OpenShift ServiceMesh (maistra) before 1.0.8 in the openshift/istio-kialia-rhel7-operator-container. An attacker with access to the container could use this flaw to modify /etc/passwd and escalate their privileges.

A vulnerability was found in all openshift/postgresql-apb 4.x.x versions prior to 4.3.0, where an insecure modification vulnerability in the /etc/passwd file was found in the container openshift/postgresql-apb. An attacker with access to the container could use this flaw to modify /etc/passwd and escalate their privileges.

A flaw was found in all versions of Keycloak before 10.0.0, where the NodeJS adapter did not support the verify-token-audience. This flaw results in some users having access to sensitive information outside of their permissions.

A flaw was found in the Red Hat 3scale API Management Platform, where member permissions for an API's admin portal were not properly enforced. This flaw allows an authenticated user to bypass normal account restrictions and access API services where they do not have permission.

It was found that system umask policy is not being honored when creating XDG user directories, since Xsession sources xdg-user-dirs.sh before setting umask policy. This only affects xdg-user-dirs before 0.15.5 as shipped with Red Hat Enterprise Linux.

dovecot 1.0.7 in Red Hat Enterprise Linux (RHEL) 5, and possibly Fedora, uses world-readable permissions for dovecot.conf, which allows local users to obtain the ssl_key_password parameter value.

A regression was found in the Red Hat Enterprise Linux 6.9 version of httpd 2.2.15-60, causing comments in the "Allow" and "Deny" configuration lines to be parsed incorrectly. A web administrator could unintentionally allow any client to access a restricted HTTP resource.

It was found in EAP 7 before 7.0.9 that properties based files of the management and the application realm configuration that contain user to role mapping are world readable allowing access to users and roles information to all the users logged in to the system.

The (1) git-remote-ext and (2) unspecified other remote helper programs in Git before 2.3.10, 2.4.x before 2.4.10, 2.5.x before 2.5.4, and 2.6.x before 2.6.1 do not properly restrict the allowed protocols, which might allow remote attackers to execute arbitrary code via a URL in a (a) .gitmodules file or (b) unknown other sources in a submodule.

An Incorrect Permission Assignment for Critical Resource flaw was found in Horizon on Red Hat OpenStack. Horizon session cookies are created without the HttpOnly flag despite HorizonSecureCookies being set to true in the environmental files, possibly leading to a loss of confidentiality and integrity.

A potentially exploitable crash in "EnumerateSubDocuments" while adding or removing sub-documents. This vulnerability affects Firefox ESR < 45.6 and Thunderbird < 45.6.

puppet-tripleo before versions 5.5.0, 6.2.0 is vulnerable to an access-control flaw in the IPtables rules management, which allowed the creation of TCP/UDP rules with empty port values. If SSL is enabled, a malicious user could use these open ports to gain access to unauthorized resources.

Red Hat Keycloak before version 2.4.0 did not correctly check permissions when handling service account user deletion requests sent to the rest server. An attacker with service account authentication could use this flaw to bypass normal permissions and delete users in a separate realm.

Jboss jbossas before versions 5.2.0-23, 6.4.13, 7.0.5 is vulnerable to an unsafe file handling in the jboss init script which could result in local privilege escalation.

Red Hat CloudForms Management Engine 4.1 does not properly handle regular expressions passed to the expression engine via the JSON API and the web-based UI, which allows remote authenticated users to execute arbitrary shell commands by leveraging the ability to view and filter collections.

SELinux policycoreutils allows local users to execute arbitrary commands outside of the sandbox via a crafted TIOCSTI ioctl call.

The web UI in Red Hat CloudForms 4.1 allows remote authenticated users to execute arbitrary code via vectors involving "Lack of field filters."

Apache Tomcat 7.x through 7.0.70 and 8.x through 8.5.4, when the CGI Servlet is enabled, follows RFC 3875 section 4.1.18 and therefore does not protect applications from the presence of untrusted client data in the HTTP_PROXY environment variable, which might allow remote attackers to redirect an application's outbound HTTP traffic to an arbitrary proxy server via a crafted Proxy header in an HTTP request, aka an "httpoxy" issue. NOTE: the vendor states "A mitigation is planned for future releases of Tomcat, tracked as CVE-2016-5388"; in other words, this is not a CVE ID for a vulnerability.

The net/http package in Go through 1.6 does not attempt to address RFC 3875 section 4.1.18 namespace conflicts and therefore does not protect CGI applications from the presence of untrusted client data in the HTTP_PROXY environment variable, which might allow remote attackers to redirect a CGI application's outbound HTTP traffic to an arbitrary proxy server via a crafted Proxy header in an HTTP request, aka an "httpoxy" issue.

ovirt-engine-webadmin, as used in Red Hat Enterprise Virtualization Manager (aka RHEV-M) for Servers and RHEV-M 4.0, allows physically proximate attackers to bypass a webadmin session timeout restriction via vectors related to UI selections, which trigger repeating queries.

libvirt before 2.0.0 improperly disables password checking when the password on a VNC server is set to an empty string, which allows remote attackers to bypass authentication and establish a VNC session by connecting to the server.

A postinstall script in the dovecot rpm allows local users to read the contents of newly created SSL/TLS key files.

libndp before 1.6, as used in NetworkManager, does not properly validate the origin of Neighbor Discovery Protocol (NDP) messages, which allows remote attackers to conduct man-in-the-middle attacks or cause a denial of service (network connectivity disruption) by advertising a node as a router from a non-local network.

The icmp_check_sysrq function in net/ipv4/icmp.c in the kernel.org projects/rt patches for the Linux kernel, as used in the kernel-rt package before 3.10.0-327.22.1 in Red Hat Enterprise Linux for Real Time 7 and other products, allows remote attackers to execute SysRq commands via crafted ICMP Echo Request packets, as demonstrated by a brute-force attack to discover a cookie, or an attack that occurs after reading the local icmp_echo_sysrq file.

Red Hat OpenShift Enterprise 3.2 and 3.1 do not properly validate the origin of a request when anonymous access is granted to a service/proxy or pod/proxy API for a specific pod, which allows remote attackers to access API credentials in the web browser localStorage via an access_token in the query parameter.

Red Hat OpenShift Enterprise 3.2, when multi-tenant SDN is enabled and a build is run in a namespace that would normally be isolated from pods in other namespaces, allows remote authenticated users to access network resources on restricted pods via an s2i build with a builder image that (1) contains ONBUILD commands or (2) does not contain a tar binary.

Unspecified vulnerability in Oracle Java SE 6u113, 7u99, and 8u77; Java SE Embedded 8u77; and JRockit R28.3.9 allows remote attackers to affect confidentiality, integrity, and availability via vectors related to JMX.

SPICE allows local guest OS users to read from or write to arbitrary host memory locations via crafted primary surface parameters, a similar issue to CVE-2015-5261.

extensions/renderer/resources/binding.js in the extension bindings in Google Chrome before 51.0.2704.63 does not properly use prototypes, which allows remote attackers to bypass the Same Origin Policy via unspecified vectors.

The ServiceWorkerContainer::registerServiceWorkerImpl function in WebKit/Source/modules/serviceworkers/ServiceWorkerContainer.cpp in Blink, as used in Google Chrome before 51.0.2704.63, allows remote attackers to bypass the Content Security Policy (CSP) protection mechanism via a ServiceWorker registration.

browser/safe_browsing/srt_field_trial_win.cc in Google Chrome before 51.0.2704.63 does not use the HTTPS service on dl.google.com to obtain the Software Removal Tool, which allows remote attackers to spoof the chrome_cleanup_tool.exe (aka CCT) file via a man-in-the-middle attack on an HTTP session.

browser/browsing_data/browsing_data_remover.cc in Google Chrome before 51.0.2704.63 deletes HPKP pins during cache clearing, which makes it easier for remote attackers to spoof web sites via a valid certificate from an arbitrary recognized Certification Authority.

The extensions subsystem in Google Chrome before 51.0.2704.79 does not properly restrict bindings access, which allows remote attackers to bypass the Same Origin Policy via unspecified vectors.

A permissions flaw was found in redis, which sets weak permissions on certain files and directories that could potentially contain sensitive information. A local, unprivileged user could possibly use this flaw to access unauthorized system information.