The OpenShift image import whitelist failed to enforce restrictions correctly when running commands such as "oc tag", for example. This could allow a user with access to OpenShift to run images from registries that should not be allowed.

The PSFTPd 10.0.4 Build 729 server does not properly escape data before writing it into a Comma Separated Values (CSV) file. This can be used by attackers to hide data in the Graphical User Interface (GUI) view and create arbitrary entries to a certain extent. Special characters such as '"' and ',' and '\r' are not escaped and can be used to add new entries to the log.

A vulnerability in the antispam protection mechanisms of Cisco AsyncOS Software for Cisco Email Security Appliance (ESA) could allow an unauthenticated, remote attacker to bypass the URL reputation filters on an affected device. The vulnerability is due to insufficient input validation of URLs. An attacker could exploit this vulnerability by crafting the URL in a particular way. A successful exploit could allow the attacker to bypass the URL reputation filters that are configured for the affected device, which could allow malicious URLs to pass through the device.

The build package before 20171128 did not check directory names during extraction of build results that allowed untrusted builds to write outside of the target system,allowing escape out of buildroots.

ZOHO WebNMS Framework 5.2 and 5.2 SP1 allows remote attackers to bypass authentication and impersonate arbitrary users via the UserName HTTP header.

A flaw was found in the way unbound before 1.6.8 validated wildcard-synthesized NSEC records. An improperly validated wildcard NSEC record could be used to prove the non-existence (NXDOMAIN answer) of an existing wildcard record, or trick unbound into accepting a NODATA proof.

An issue was discovered in Joomla! before 3.9.16. Missing length checks in the user table can lead to the creation of users with duplicate usernames and/or email addresses.

A vulnerability in the Sender Policy Framework (SPF) functionality of Cisco AsyncOS Software for Cisco Email Security Appliance (ESA) could allow an unauthenticated, remote attacker to bypass the configured user filters on an affected device. The vulnerability exists because the affected software insufficiently validates certain incoming SPF messages. An attacker could exploit this vulnerability by sending a custom SPF packet to an affected device. A successful exploit could allow the attacker to bypass the configured header filters, which could allow malicious content to pass through the device.

A vulnerability in Cisco Finesse could allow an unauthenticated, remote attacker to bypass access controls and conduct a server-side request forgery (SSRF) attack on an affected system. The vulnerability exists because the affected system does not properly validate user-supplied input. An attacker could exploit this vulnerability by sending a crafted request to a user of the web application. A successful exploit could allow the attacker to access the system and perform unauthorized actions.

Incorrect handling of user input in ZIP extraction was detected in JetBrains TeamCity. The issue was fixed in TeamCity 2018.2.2.

A vulnerability in the file and malware inspection feature of Cisco Firepower Management Center (FMC) Software could allow an unauthenticated, remote attacker to bypass the file and malware inspection policies on an affected system. The vulnerability exists because the affected software insufficiently validates incoming traffic. An attacker could exploit this vulnerability by sending a crafted HTTP request through an affected device. A successful exploit could allow the attacker to bypass the file and malware inspection policies and send malicious traffic through the affected device.

An issue was discovered in GitLab Community and Enterprise Edition 11.7 through 11.11. It has Improper Input Validation. Restricted visibility settings allow creating internal projects in private groups, leading to multiple permission issues.

Domoticz before 4.10579 neglects to categorize \n and \r as insecure argument options.

Audit before 2.4.4 in Linux does not sanitize escape characters in filenames.

In wpa_supplicant and hostapd 2.9, forging attacks may occur because AlgorithmIdentifier parameters are mishandled in tls/pkcs1.c and tls/x509v3.c.

Sequelize version 5 before 5.3.0 does not properly ensure that standard conforming strings are used.

repo/setting.go in Gitea before 1.7.6 and 1.8.x before 1.8-RC3 does not validate the form.MirrorAddress before calling SaveAddress.

On Beijing Hanbang Hanbanggaoke devices, because user-controlled input is not sufficiently sanitized, sending a PUT request to /ISAPI/Security/users/1 allows an admin password change.

A vulnerability was discovered in DNS resolver of knot resolver before version 4.1.0 which allows remote attackers to downgrade DNSSEC-secure domains to DNSSEC-insecure state, opening possibility of domain hijack using attacks against insecure DNS protocol.

A vulnerability was discovered in DNS resolver component of knot resolver through version 3.2.0 before 4.1.0 which allows remote attackers to bypass DNSSEC validation for non-existence answer. NXDOMAIN answer would get passed through to the client even if its DNSSEC validation failed, instead of sending a SERVFAIL packet. Caching is not affected by this particular bug but see CVE-2019-10191.

Async Http Client (aka async-http-client) before 2.0.35 can be tricked into connecting to a host different from the one extracted by java.net.URI if a '?' character occurs in a fragment identifier. Similar bugs were previously identified in cURL (CVE-2016-8624) and Oracle Java 8 java.net.URL.

An issue was discovered in a smart contract implementation for UserWallet 0x0a7bca9FB7AfF26c6ED8029BB6f0F5D291587c42, an Ethereum token. First, suppose that the owner adds the evil contract address to his sweepers. The evil contract looks like this: contract Exploit { uint public start; function sweep(address _token, uint _amount) returns (bool) { start = 0x123456789; return true;} }. Then, when one calls the function sweep() in the UserWallet contract, it will change the sweeperList to 0X123456789.

The PayPal Website Payments Standard functionality in the Ubercart module 5.x before 5.x-1.9 and 6.x before 6.x-2.1 for Drupal does not properly validate orders, which allows remote attackers to trigger unspecified "duplicate actions" via unknown vectors.

A Host Header Injection vulnerability in Trend Micro OfficeScan XG (12.0) may allow an attacker to spoof a particular Host header, allowing the attacker to render arbitrary links that point to a malicious website with poisoned Host header webpages.

A vulnerability exists in the process of creating default IP blocks during device initialization for Cisco ASA Next-Generation Firewall Services that could allow an unauthenticated, remote attacker to send traffic to the local IP address of the device, bypassing any filters that are configured to deny local IP management traffic. The vulnerability is due to an implementation error that exists in the process of creating default IP blocks when the device is initialized, and the way in which those IP blocks interact with user-configured filters for local IP management traffic (for example, SSH to the device). An attacker could exploit this vulnerability by sending traffic to the local IP address of the targeted device. A successful exploit could allow the attacker to connect to the local IP address of the device even when there are filters configured to deny the traffic. Cisco Bug IDs: CSCvd97962.

A malicious host header in an incoming HTTP request could cause NiFi to load resources from an external server. The fix to sanitize host headers and compare to a controlled whitelist was applied on the Apache NiFi 1.5.0 release. Users running a prior 1.x release should upgrade to the appropriate release.

A vulnerability in the malware detection functionality within Advanced Malware Protection (AMP) of Cisco AsyncOS Software for Cisco Email Security Appliances (ESAs) could allow an unauthenticated, remote attacker to cause an email attachment containing malware to be delivered to the end user. The vulnerability is due to the failure of AMP to scan certain EML attachments that could contain malware. An attacker could exploit this vulnerability by sending an email with a crafted EML attachment through the targeted device. A successful exploit could allow the attacker to bypass the configured ESA email message and content filtering and allow the malware to be delivered to the end user. Vulnerable Products: This vulnerability affects Cisco AsyncOS Software for Cisco ESA, both virtual and hardware appliances, that are configured with message or content filters to scan incoming email attachments on the ESA. Cisco Bug IDs: CSCuz81533.

qa-include/qa-install.php in Question2Answer before 1.7.5 allows remote attackers to create multiple user accounts.

The InfoCard module 1.0 for SimpleSAMLphp allows attackers to spoof XML messages by leveraging an incorrect check of return values in signature validation utilities.

IBM Security Guardium 10.0 and 10.1 processes patches, image backups and other updates without sufficiently verifying the origin and integrity of the code. IBM X-Force ID: 124742.

A vulnerability in the SNORT detection engine of Cisco Firepower System Software could allow an unauthenticated, remote attacker to bypass a file policy that is configured to block the Server Message Block Version 2 (SMB2) protocol. The vulnerability is due to the incorrect detection of an SMB2 file when the detection is based on the length of the file. An attacker could exploit this vulnerability by sending a crafted SMB2 transfer request through the targeted device. A successful exploit could allow the attacker to bypass filters that are configured to block SMB2 traffic. Cisco Bug IDs: CSCve58398.

In Ruby before 2.2.10, 2.3.x before 2.3.7, 2.4.x before 2.4.4, 2.5.x before 2.5.1, and 2.6.0-preview1, the UNIXServer.open and UNIXSocket.open methods are not checked for null characters. It may be connected to an unintended socket.

A vulnerability in the web interface of Cisco Network Analysis Module Software could allow an unauthenticated, remote attacker to delete arbitrary files from an affected system, aka Directory Traversal. The vulnerability exists because the affected software does not perform proper input validation of HTTP requests that it receives and the software does not apply role-based access controls (RBACs) to requested HTTP URLs. An attacker could exploit this vulnerability by sending a crafted HTTP request to the affected software. A successful exploit could allow the attacker to delete arbitrary files from the affected system. Cisco Bug IDs: CSCvf41365.

The multiauth module in SimpleSAMLphp 1.14.13 and earlier allows remote attackers to bypass authentication context restrictions and use an authentication source defined in config/authsources.php via vectors related to improper validation of user input.

An input validation vulnerability in CA Privileged Access Manager 2.x allows remote attackers to poison log files with specially crafted input.

Bitcoin Core before 0.14 allows an attacker to create an ostensibly valid SPV proof for a payment to a victim who uses an SPV wallet, even if that payment did not actually occur. Completing the attack would cost more than a million dollars, and is relevant mainly only in situations where an autonomous system relies solely on an SPV proof for transactions of a greater dollar amount.

CRLF injection vulnerability in Xerver HTTP Server 4.31 and 4.32 allows remote attackers to inject arbitrary HTTP headers and conduct HTTP response splitting attacks via certain byte sequences at the end of a URL. NOTE: some of these details are obtained from third party information.

DeStar 0.2.2-5 allows remote attackers to add arbitrary users via a direct request to config/add/CfgOptUser.

Visual truncation vulnerability in Mozilla Firefox before 3.0.14, and 3.5.x before 3.5.3, allows remote attackers to trigger a vertical scroll and spoof URLs via unspecified Unicode characters with a tall line-height property.

A malicious webview could install long-lived unload handlers that re-use an incognito BrowserContext that is queued for destruction in versions of Oxide before 1.18.3.

Cisco AsyncOS on Email Security Appliance (ESA) devices through 9.7.0-125 allows remote attackers to bypass malware detection via a crafted attachment in an e-mail message, aka Bug ID CSCuz14932.

The link-log plugin before 2.0 for WordPress has HTTP Response Splitting.

An issue was discovered in Joomla! before 3.9.17. Improper input validations in the usergroup table class could lead to a broken ACL configuration.

An issue was discovered on Samsung mobile devices with JBP(4.3), KK(4.4), and L(5.0/5.1) software. Because of a misused whitelist, attackers can reach the radio layer (aka RIL or RILD) to place calls or send SMS messages. The Samsung ID is SVE-2016-5733 (May 2016).

Apache jUDDI before 2.0 allows attackers to spoof entries in log files via vectors related to error logging of keys from uddiget.jsp.

A vulnerability in the Multipurpose Internet Mail Extensions (MIME) scanner of Cisco AsyncOS Software for Cisco Email Security Appliances (ESA) could allow an unauthenticated, remote attacker to bypass configured user filters on the device, aka a Malformed MIME Header Filtering Bypass. This vulnerability affects all releases prior to the first fixed release of Cisco AsyncOS Software for Cisco Email Security Appliances, both virtual and hardware appliances, if the software is configured to apply a message filter or content filter to incoming email attachments. More Information: CSCvb65245. Known Affected Releases: 9.7.1-066. Known Fixed Releases: 9.8.0-092.

A vulnerability in the Multipurpose Internet Mail Extensions (MIME) scanner of Cisco AsyncOS Software for Cisco Email Security Appliances (ESA) and Web Security Appliances (WSA) could allow an unauthenticated, remote attacker to bypass configured user filters on the device. Affected Products: This vulnerability affects all releases prior to the first fixed release of Cisco AsyncOS Software for Cisco ESA and Cisco WSA, both virtual and hardware appliances, that are configured with message or content filters to scan incoming email attachments on the ESA or services scanning content of web access on the WSA. More Information: SCvb91473, CSCvc76500. Known Affected Releases: 10.0.0-203 9.9.9-894 WSA10.0.0-233.

Symantec Reporting Server, as used in Symantec AntiVirus (SAV) Corporate Edition 10.1 before 10.1 MR8 and 10.2 before 10.2 MR2, Symantec Client Security (SCS) before 3.1 MR8, and the Symantec Endpoint Protection Manager (SEPM) component in Symantec Endpoint Protection (SEP) before 11.0 MR2, allows remote attackers to inject arbitrary text into the login screen, and possibly conduct phishing attacks, via vectors involving a URL that is not properly handled.

URI.js is a Javascript URL mutation library. Before version 1.19.9, whitespace characters are not removed from the beginning of the protocol, so URLs are not parsed properly. This issue has been patched in version 1.19.9. Removing leading whitespace from values before passing them to URI.parse can be used as a workaround.