This vulnerability allows remote attackers to bypass authentication on affected installations of TP-Link Archer A7 Firmware Ver: 190726 AC1750 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the handling of SSH port forwarding requests during initial setup. The issue results from the lack of proper authentication prior to establishing SSH port forwarding rules. An attacker can leverage this vulnerability to escalate privileges to resources normally protected from the WAN interface. Was ZDI-CAN-9664.

The TP-LINK EAP Controller is TP-LINK's software for remotely controlling wireless access point devices. It utilizes a Java remote method invocation (RMI) service for remote control. The RMI interface does not require any authentication before use, so it lacks user authentication for RMI service commands in EAP controller versions 2.5.3 and earlier. Remote attackers can implement deserialization attacks through the RMI protocol. Successful attacks may allow a remote attacker to remotely control the target server and execute Java functions or bytecode.

This vulnerability allows remote attackers to execute arbitrary code on affected installations of TP-Link Archer C90 1.0.6 Build 20200114 rel.73164(5553) routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the handling of DNS responses. A crafted DNS message can trigger an overflow of a fixed-length, stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-14655.

TP-Link TL-WR886N 7.0 1.1.0 devices allow remote attackers to cause a denial of service (Tlb Load Exception) via crafted DNS packets to port 53/udp.

/usr/lib/lua/luci/websys.lua on TP-LINK IPC TL-IPC223(P)-6, TL-IPC323K-D, TL-IPC325(KP)-*, and TL-IPC40A-4 devices has a hardcoded zMiVw8Kw0oxKXL0 password.

An issue was discovered on TP-Link TL-WR840N v5 00000005 0.9.1 3.16 v0001.0 Build 170608 Rel.58696n and TL-WR841N v13 00000013 0.9.1 4.16 v0001.0 Build 170622 Rel.64334n devices. This issue is caused by improper session handling on the /cgi/ folder or a /cgi file. If an attacker sends a header of "Referer: http://192.168.0.1/mainFrame.htm" then no authentication is required for any action.

The executable httpd on the TP-Link WR841N V8 router before TL-WR841N(UN)_V8_170210 contained a design flaw in the use of DES for block encryption. This resulted in incorrect access control, which allowed attackers to gain read-write access to system settings through the protected router configuration service tddp via the LAN and Ath0 (Wi-Fi) interfaces.

vsftpd on TP-Link C2 and C20i devices through firmware 0.9.1 4.2 v0032.0 Build 160706 Rel.37961n has a backdoor admin account with the 1234 password, a backdoor guest account with the guest password, and a backdoor test account with the test password.

On the TP-Link TL-SG108E 1.0, a remote attacker could retrieve credentials from "Switch Info" log lines where passwords are in cleartext. This affects the 1.1.2 Build 20141017 Rel.50749 firmware.

On the TP-Link TL-SG108E 1.0, admin network communications are RC4 encoded, even though RC4 is deprecated. This affects the 1.1.2 Build 20141017 Rel.50749 firmware.

On the TP-Link TL-SG108E 1.0, a remote attacker could retrieve credentials from "SEND data" log lines where passwords are encoded in hexadecimal. This affects the 1.1.2 Build 20141017 Rel.50749 firmware.

The default configuration of the TP-Link 8840T router enables web-based administration on the WAN interface, which allows remote attackers to establish an HTTP connection and possibly have unspecified other impact via unknown vectors.

TP-Link AX1800 hotplugd Firewall Rule Race Condition Vulnerability. This vulnerability allows remote attackers to gain access to LAN-side services on affected installations of TP-Link Archer AX21 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the hotplugd daemon. The issue results from firewall rule handling that allows an attacker access to resources that should be available to the LAN interface only. An attacker can leverage this in conjunction with other vulnerabilities to execute arbitrary code in the context of the root user. . Was ZDI-CAN-19664.

The vulnerability exists in TP-Link TL-WR841N V11 3.16.9 Build 160325 Rel.62500n wireless router due to transmission of authentication information in cleartextbase64 format. Successful exploitation of this vulnerability could allow a remote attacker to intercept credentials and subsequently perform administrative operations on the affected device through web-based management interface.

TP-LINK TL-WR840N(ES)_V6.20_180709 was discovered to contain a command injection vulnerability via the component oal_setIp6DefaultRoute.

TP-LINK TL-WR840N(ES)_V6.20_180709 was discovered to contain a remote code execution (RCE) vulnerability via the function oal_wan6_setIpAddr.

TP-Link TL-WA850RE Wi-Fi Range Extender before v6_200923 was discovered to use highly predictable and easily detectable session keys, allowing attackers to gain administrative privileges.

This vulnerability allows remote attackers to execute arbitrary code on affected installations of TP-Link Archer A7 Firmware Ver: 190726 AC1750 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the tmpServer service, which listens on TCP port 20002. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-9662.

This vulnerability allows remote attackers to execute arbitrary code on affected installations of TP-Link Archer A7 Firmware Ver: 190726 AC1750 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the handling of DNS responses. A crafted DNS message can trigger an overflow of a fixed-length, stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of the root user. Was ZDI-CAN-9660.

This vulnerability allows a firewall bypass on affected installations of TP-Link Archer A7 Firmware Ver: 190726 AC1750 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the handling of IPv6 connections. The issue results from the lack of proper filtering of IPv6 SSH connections. An attacker can leverage this in conjunction with other vulnerabilities to execute code in the context of root. Was ZDI-CAN-9663.

passwd_recovery.lua on the TP-Link Archer C9(UN)_V2_160517 allows an attacker to reset the admin password by leveraging a predictable random number generator seed. This is fixed in C9(UN)_V2_170511.

CMD_SET_CONFIG_COUNTRY in the TP-Link Device Debug protocol in TP-Link Archer C1200 1.0.0 Build 20180502 rel.45702 and earlier is prone to a stack-based buffer overflow, which allows a remote attacker to achieve code execution or denial of service by sending a crafted payload to the listening server.

CMD_FTEST_CONFIG in the TP-Link Device Debug protocol in TP-Link Wireless Router Archer Router version 1.0.0 Build 20180502 rel.45702 (EU) and earlier is prone to a stack-based buffer overflow, which allows a remote attacker to achieve code execution or denial of service by sending a crafted payload to the listening server.

The web-based configuration interface of the TP-Link M7350 V3 with firmware before 190531 is affected by a pre-authentication command injection vulnerability.

On TP-Link TL-WR849N 0.9.1 4.16 devices, a remote command execution vulnerability in the diagnostics area can be exploited when an attacker sends specific shell metacharacters to the panel's traceroute feature.

A password-disclosure issue in the web interface on certain TP-Link devices allows a remote attacker to get full administrative access to the web panel. This affects WA901ND devices before 3.16.9(201211) beta, and Archer C5, Archer C7, MR3420, MR6400, WA701ND, WA801ND, WDR3500, WDR3600, WE843N, WR1043ND, WR1045ND, WR740N, WR741ND, WR749N, WR802N, WR840N, WR841HP, WR841N, WR842N, WR842ND, WR845N, WR940N, WR941HP, WR945N, WR949N, and WRD4300 devices.

Buffer overflow in in the copy_msg_element function for the devDiscoverHandle server in the TP-Link WR and WDR series, including WDR7400, WDR7500, WDR7660, WDR7800, WDR8400, WDR8500, WDR8600, WDR8620, WDR8640, WDR8660, WR880N, WR886N, WR890N, WR890N, WR882N, and WR708N.

This vulnerability allows remote attackers to execute arbitrary code on affected installations of TP-Link Archer A7 Firmware Ver: 190726 AC1750 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the handling of DNS responses. The issue results from the lack of proper validation of DNS reponses prior to further processing. An attacker can leverage this in conjunction with other vulnerabilities to execute code in the context of the root user. Was ZDI-CAN-9661.

An issue was discovered on TP-Link TL-WR1043ND V2 devices. An attacker can send a cookie in an HTTP authentication packet to the router management web interface, and fully control the router without knowledge of the credentials.

On the TP-Link TL-SG108E 1.0, the upgrade process can be requested remotely without authentication (httpupg.cgi with a parameter called cmd). This affects the 1.1.2 Build 20141017 Rel.50749 firmware.

A vulnerability in the TP-Link Archer c20 router with firmware version V6.6_230412 and earlier permits unauthorized individuals to bypass the authentication of some interfaces under the /cgi directory. When adding Referer: http://tplinkwifi.net to the the request, it will be recognized as passing the authentication.

TP-Link SG105PE firmware prior to 'TL-SG105PE(UN) 1.0_1.0.0 Build 20221208' contains an authentication bypass vulnerability. Under the certain conditions, an attacker may impersonate an administrator of the product. As a result, information may be obtained and/or the product's settings may be altered with the privilege of the administrator.

Improper authentication vulnerability in Archer C20 firmware versions prior to 'Archer C20(JP)_V1_230616' allows a network-adjacent unauthenticated attacker to execute an arbitrary OS command via a crafted request to bypass authentication.

TP-Link USB Network Server TL-PS310U devices before 2.079.000.t0210 allow an attacker on the same network to bypass authentication via a web-administration request that lacks a password parameter.

This vulnerability allows network-adjacent attackers to escalate privileges on affected installations of TP-Link TL-WA855RE Firmware Ver: 855rev4-up-ver1-0-1-P1[20191213-rel60361] Wi-Fi extenders. Although authentication is required to exploit this vulnerability, the existing authentication mechanism can be bypassed. The specific flaw exists within the first-time setup process. The issue results from the lack of proper validation on first-time setup requests. An attacker can leverage this vulnerability to reset the password for the Admin account and execute code in the context of the device. Was ZDI-CAN-10003.

On TP-Link NC250 devices with firmware through 1.2.1 build 170515, anyone can view video and audio without authentication via an rtsp://admin@yourip:554/h264_hd.sdp URL.

The authenticate function in LDAPUserFolder/LDAPUserFolder.py in zope-ldapuserfolder 2.9-1 does not verify the password for the emergency account, which allows remote attackers to gain privileges.

The check_password function in html/admin/login.php in PacketFence before 3.0.2 allows remote attackers to bypass authentication via an empty password.

A vulnerability has been found in Kehua Charging Pile Cloud Platform 1.0 and classified as critical. This vulnerability affects unknown code of the file /home. The manipulation leads to improper authentication. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

Apache Pony Mail 0.6c through 0.8b allows remote attackers to bypass authentication.

Geyser is a bridge between Minecraft: Bedrock Edition and Minecraft: Java Edition. Versions of Geyser prior to 1.4.2-SNAPSHOT allow anyone that can connect to the server to forge a LoginPacket with manipulated JWT token allowing impersonation as any user. Version 1.4.2-SNAPSHOT contains a patch for the issue. There are no known workarounds aside from upgrading.

A flaw in the authentication mechanism in the Login Panel of router D-Link DSL-3782 (A1_WI_20170303 || SWVer="V100R001B012" FWVer="3.10.0.24" FirmVer="TT_77616E6771696F6E67") allows unauthenticated attackers to perform arbitrary modification (read, write) to passwords and configurations meanwhile an administrator is logged into the web panel.

Mahara before 1.0.15, 1.1.x before 1.1.9, and 1.2.x before 1.2.5 has improper configuration options for authentication plugins associated with logins that use the single sign-on (SSO) functionality, which allows remote attackers to bypass authentication via an empty password. NOTE: some of these details are obtained from third party information.

BMC BladeLogic Server Automation (BSA) before 8.7 Patch 3 allows remote attackers to bypass authentication and consequently read arbitrary files or possibly have unspecified other impact by leveraging a "logic flaw" in the authentication process.

In some cases, Service Pack 4 for Windows NT 4.0 can allow access to network shares using a blank password, through a problem with a null NT hash value.

The server components in Objectivity/DB 10.0 do not require authentication for administrative commands, which allows remote attackers to modify data, obtain sensitive information, or cause a denial of service by sending requests over TCP to (1) the Lock Server or (2) the Advanced Multithreaded Server, as demonstrated by commands that are ordinarily sent by the (a) ookillls and (b) oostopams applications. NOTE: some of these details are obtained from third party information.

Western Digital WD My Cloud v04.05.00-320 devices embed the session token (aka PHPSESSID) in filenames, which makes it easier for attackers to bypass authentication by listing a directory. NOTE: this can be exploited in conjunction with CVE-2018-7171 for remote authentication bypass within a product that uses My Cloud.

A vulnerability has been identified in SICLOCK TC100 (All versions) and SICLOCK TC400 (All versions). An attacker with network access to the device could potentially circumvent the authentication mechanism if he/she is able to obtain certain knowledge specific to the attacked device.

A remote code execution issue was discovered in the WooCommerce Products Filter (aka WOOF) plugin before 2.2.0 for WordPress, as demonstrated by the shortcode parameter in a woof_redraw_woof action. The plugin implemented a page redraw AJAX function accessible to anyone without any authentication. WordPress shortcode markup in the "shortcode" parameters would be evaluated. Normally unauthenticated users can't evaluate shortcodes as they are often sensitive.