TP-Link TL-WR886N 7.0 1.1.0 devices allow remote attackers to cause a denial of service (Tlb Load Exception) via crafted DNS packets to port 53/udp.

TP-LINK TL-WR840N(ES)_V6.20_180709 was discovered to contain a command injection vulnerability via the component oal_setIp6DefaultRoute.

On the TP-Link TL-SG108E 1.0, a remote attacker could retrieve credentials from "SEND data" log lines where passwords are encoded in hexadecimal. This affects the 1.1.2 Build 20141017 Rel.50749 firmware.

On the TP-Link TL-SG108E 1.0, admin network communications are RC4 encoded, even though RC4 is deprecated. This affects the 1.1.2 Build 20141017 Rel.50749 firmware.

The TP-LINK EAP Controller is TP-LINK's software for remotely controlling wireless access point devices. It utilizes a Java remote method invocation (RMI) service for remote control. The RMI interface does not require any authentication before use, so it lacks user authentication for RMI service commands in EAP controller versions 2.5.3 and earlier. Remote attackers can implement deserialization attacks through the RMI protocol. Successful attacks may allow a remote attacker to remotely control the target server and execute Java functions or bytecode.

TP-Link TL-WA850RE Wi-Fi Range Extender before v6_200923 was discovered to use highly predictable and easily detectable session keys, allowing attackers to gain administrative privileges.

A password-disclosure issue in the web interface on certain TP-Link devices allows a remote attacker to get full administrative access to the web panel. This affects WA901ND devices before 3.16.9(201211) beta, and Archer C5, Archer C7, MR3420, MR6400, WA701ND, WA801ND, WDR3500, WDR3600, WE843N, WR1043ND, WR1045ND, WR740N, WR741ND, WR749N, WR802N, WR840N, WR841HP, WR841N, WR842N, WR842ND, WR845N, WR940N, WR941HP, WR945N, WR949N, and WRD4300 devices.

Buffer overflow in in the copy_msg_element function for the devDiscoverHandle server in the TP-Link WR and WDR series, including WDR7400, WDR7500, WDR7660, WDR7800, WDR8400, WDR8500, WDR8600, WDR8620, WDR8640, WDR8660, WR880N, WR886N, WR890N, WR890N, WR882N, and WR708N.

TP-LINK TL-WR840N(ES)_V6.20_180709 was discovered to contain a remote code execution (RCE) vulnerability via the function oal_wan6_setIpAddr.

This vulnerability allows a firewall bypass on affected installations of TP-Link Archer A7 Firmware Ver: 190726 AC1750 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the handling of IPv6 connections. The issue results from the lack of proper filtering of IPv6 SSH connections. An attacker can leverage this in conjunction with other vulnerabilities to execute code in the context of root. Was ZDI-CAN-9663.

This vulnerability allows remote attackers to execute arbitrary code on affected installations of TP-Link Archer A7 Firmware Ver: 190726 AC1750 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the tmpServer service, which listens on TCP port 20002. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-9662.

The vulnerability exists in TP-Link TL-WR841N V11 3.16.9 Build 160325 Rel.62500n wireless router due to transmission of authentication information in cleartextbase64 format. Successful exploitation of this vulnerability could allow a remote attacker to intercept credentials and subsequently perform administrative operations on the affected device through web-based management interface.

This vulnerability allows remote attackers to bypass authentication on affected installations of TP-Link Archer A7 Firmware Ver: 190726 AC1750 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the handling of SSH port forwarding requests during initial setup. The issue results from the lack of proper authentication prior to establishing SSH port forwarding rules. An attacker can leverage this vulnerability to escalate privileges to resources normally protected from the WAN interface. Was ZDI-CAN-9664.

An issue was discovered on TP-Link TL-WR840N v5 00000005 0.9.1 3.16 v0001.0 Build 170608 Rel.58696n and TL-WR841N v13 00000013 0.9.1 4.16 v0001.0 Build 170622 Rel.64334n devices. This issue is caused by improper session handling on the /cgi/ folder or a /cgi file. If an attacker sends a header of "Referer: http://192.168.0.1/mainFrame.htm" then no authentication is required for any action.

On TP-Link TL-WR841N v13 00000001 0.9.1 4.16 v0001.0 Build 171019 Rel.55346n devices, all actions in the web interface are affected by bypass of authentication via an HTTP request.

The executable httpd on the TP-Link WR841N V8 router before TL-WR841N(UN)_V8_170210 contained a design flaw in the use of DES for block encryption. This resulted in incorrect access control, which allowed attackers to gain read-write access to system settings through the protected router configuration service tddp via the LAN and Ath0 (Wi-Fi) interfaces.

vsftpd on TP-Link C2 and C20i devices through firmware 0.9.1 4.2 v0032.0 Build 160706 Rel.37961n has a backdoor admin account with the 1234 password, a backdoor guest account with the guest password, and a backdoor test account with the test password.

On the TP-Link TL-SG108E 1.0, a remote attacker could retrieve credentials from "Switch Info" log lines where passwords are in cleartext. This affects the 1.1.2 Build 20141017 Rel.50749 firmware.

passwd_recovery.lua on the TP-Link Archer C9(UN)_V2_160517 allows an attacker to reset the admin password by leveraging a predictable random number generator seed. This is fixed in C9(UN)_V2_170511.

This vulnerability allows remote attackers to execute arbitrary code on affected installations of TP-Link Archer C90 1.0.6 Build 20200114 rel.73164(5553) routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the handling of DNS responses. A crafted DNS message can trigger an overflow of a fixed-length, stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-14655.

An issue was discovered on TP-Link TL-WR1043ND V2 devices. An attacker can send a cookie in an HTTP authentication packet to the router management web interface, and fully control the router without knowledge of the credentials.

This vulnerability allows remote attackers to execute arbitrary code on affected installations of TP-Link Archer A7 Firmware Ver: 190726 AC1750 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the handling of DNS responses. The issue results from the lack of proper validation of DNS reponses prior to further processing. An attacker can leverage this in conjunction with other vulnerabilities to execute code in the context of the root user. Was ZDI-CAN-9661.

This vulnerability allows remote attackers to execute arbitrary code on affected installations of TP-Link Archer A7 Firmware Ver: 190726 AC1750 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the handling of DNS responses. A crafted DNS message can trigger an overflow of a fixed-length, stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of the root user. Was ZDI-CAN-9660.

CMD_FTEST_CONFIG in the TP-Link Device Debug protocol in TP-Link Wireless Router Archer Router version 1.0.0 Build 20180502 rel.45702 (EU) and earlier is prone to a stack-based buffer overflow, which allows a remote attacker to achieve code execution or denial of service by sending a crafted payload to the listening server.

CMD_SET_CONFIG_COUNTRY in the TP-Link Device Debug protocol in TP-Link Archer C1200 1.0.0 Build 20180502 rel.45702 and earlier is prone to a stack-based buffer overflow, which allows a remote attacker to achieve code execution or denial of service by sending a crafted payload to the listening server.

The web-based configuration interface of the TP-Link M7350 V3 with firmware before 190531 is affected by a pre-authentication command injection vulnerability.

TP-Link AX1800 hotplugd Firewall Rule Race Condition Vulnerability. This vulnerability allows remote attackers to gain access to LAN-side services on affected installations of TP-Link Archer AX21 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the hotplugd daemon. The issue results from firewall rule handling that allows an attacker access to resources that should be available to the LAN interface only. An attacker can leverage this in conjunction with other vulnerabilities to execute arbitrary code in the context of the root user. . Was ZDI-CAN-19664.

The default configuration of the TP-Link 8840T router enables web-based administration on the WAN interface, which allows remote attackers to establish an HTTP connection and possibly have unspecified other impact via unknown vectors.

On TP-Link TL-WR849N 0.9.1 4.16 devices, a remote command execution vulnerability in the diagnostics area can be exploited when an attacker sends specific shell metacharacters to the panel's traceroute feature.

TL-WR845N(UN)_V4_200909 and TL-WR845N(UN)_V4_190219 was discovered to contain a hardcoded password for the root account which can be obtained by analyzing downloaded firmware or via a brute force attack through physical access to the router.

A Security Bypass vulnerability exists in TP-LINK IP Cameras TL-SC 3130, TL-SC 3130G, 3171G, 4171G, and 3130 1.6.18P12 due to default hard-coded credentials for the administrative Web interface, which could let a malicious user obtain unauthorized access to CGI files.

TP-Link Tapo C310 1.3.0 devices allow access to the RTSP video feed via credentials of User --- and Password TPL075526460603.

Certain TP-Link devices have a Hardcoded Encryption Key. This affects NC200 2.1.9 build 200225, N210 1.0.9 build 200304, NC220 1.3.0 build 200304, NC230 1.3.0 build 200304, NC250 1.3.0 build 200304, NC260 1.5.2 build 200304, and NC450 1.5.3 build 200304.

This vulnerability allows network-adjacent attackers execute arbitrary code on affected installations of TP-Link Archer A7 Firmware Ver: 190726 AC1750 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the tdpServer service, which listens on UDP port 20002 by default. This issue results from the use of hard-coded encryption key. An attacker can leverage this in conjunction with other vulnerabilities to execute code in the context of root. Was ZDI-CAN-9652.

On the TP-Link TL-SG108E 1.0, there is a hard-coded ciphering key (a long string beginning with Ei2HNryt). This affects the 1.1.2 Build 20141017 Rel.50749 firmware.

The web application backup file in the TP-Link EAP Controller and Omada Controller versions 2.5.4_Windows/2.6.0_Windows is encrypted with a hard-coded cryptographic key, so anyone who knows that key and the algorithm can decrypt it. A low-privilege user could decrypt and modify the backup file in order to elevate their privileges. This is fixed in version 2.6.1_Windows.

The web app client of TP-Link AX10v1 V1_211117 uses hard-coded cryptographic keys when communicating with the router. Attackers who are able to intercept the communications between the web client and router through a man-in-the-middle attack can then obtain the sequence key via a brute-force attack, and access sensitive information.

Archer C50 firmware versions prior to 'Archer C50(JP)_V3_230505' and Archer C55 firmware versions prior to 'Archer C55(JP)_V1_230506' use hard-coded credentials to login to the affected device, which may allow a network-adjacent unauthenticated attacker to execute an arbitrary OS command.

A vulnerability has been identified in RAPIDLab 1200 systems / RAPIDPoint 400 systems / RAPIDPoint 500 systems (All versions_without_ use of Siemens Healthineers Informatics products), RAPIDLab 1200 Series (All versions < V3.3 _with_ Siemens Healthineers Informatics products), RAPIDPoint 500 systems (All versions >= V3.0 _with_ Siemens Healthineers Informatics products), RAPIDPoint 500 systems (V2.4.X_with_ Siemens Healthineers Informatics products), RAPIDPoint 500 systems (All versions =< V2.3 _with_ Siemens Healthineers Informatics products), RAPIDPoint 400 systems (All versions _with_ Siemens Healthineers Informatics products). A factory account with hardcoded password might allow attackers access to the device over port 5900/tcp. Successful exploitation requires no user interaction or privileges and impacts the confidentiality, integrity, and availability of the affected device. At the time of advisory publication, no public exploitation of this security vulnerability is known. Siemens Healthineers confirms the security vulnerability and provides mitigations to resolve the security issue.

A vulnerability was found in shsuishang ShopSuite ModulithShop up to 45a99398cec3b7ad7ff9383694f0b53339f2d35a. Affected by this issue is some unknown functionality of the component RSA/OAuth2/Database. The manipulation results in hard-coded credentials. The attack can be executed remotely. The exploit has been made public and could be used. This product implements a rolling release for ongoing delivery, which means version information for affected or updated releases is unavailable.

Use of MAC address as an authenticated password in QSAN Storage Manager, XEVO, SANOS allows local attackers to escalate privileges. Suggest contacting with QSAN and refer to recommendations in QSAN Document.

The vulnerability of hard-coded default credentials in QSAN SANOS allows unauthenticated remote attackers to obtain administrator’s permission and execute arbitrary functions. The referred vulnerability has been solved with the updated version of QSAN SANOS v2.1.0.

Swann SWWHD-INTCAM-HD devices have the twipc root password, leading to FTP access as root. NOTE: all affected customers were migrated by 2020-08-31.

Certain NETGEAR devices are affected by a hardcoded password. This affects D3600 before 1.0.0.76 and D6000 before 1.0.0.76.

IBM Security Identity Governance and Intelligence 5.2 through 5.2.4.1 Virtual Appliance contains hard-coded credentials, such as a password or cryptographic key, which it uses for its own inbound authentication, outbound communication to external components, or encryption of internal data. IBM X-Force ID: 153386.

Deltek Vision 7.x before 7.6 permits the execution of any attacker supplied SQL statement through a custom RPC over HTTP protocol. The Vision system relies on the client binary to enforce security rules and integrity of SQL statements and other content being sent to the server. Client HTTP calls can be manipulated by one of several means to execute arbitrary SQL statements (similar to SQLi) or possibly have unspecified other impact via this custom protocol. To perform these attacks an authenticated session is first required. In some cases client calls are obfuscated by encryption, which can be bypassed due to hard-coded keys and an insecure key rotation protocol. Impacts may include remote code execution in some deployments; however, the vendor states that this cannot occur when the installation documentation is heeded.

An issue was discovered on Foscam C2 devices with System Firmware 1.11.1.8 and Application Firmware 2.72.1.32, and Opticam i5 devices with System Firmware 1.5.2.11 and Application Firmware 2.21.1.128. There is a hardcoded Ak47@99 password for the factory~ account.

NUUO CMS all versions 3.1 and prior, The application creates default accounts that have hard-coded passwords, which could allow an attacker to gain privileged access.

An issue was discovered on Foscam C2 devices with System Firmware 1.11.1.8 and Application Firmware 2.72.1.32, and Opticam i5 devices with System Firmware 1.5.2.11 and Application Firmware 2.21.1.128. The CGIProxy.fcgi?cmd=setTelnetSwitch feature is authorized for the root user with a password of toor.

IBM Security Guardium 10 and 10.5 contains hard-coded credentials, such as a password or cryptographic key, which it uses for its own inbound authentication, outbound communication to external components, or encryption of internal data. IBM X-Force ID: 150022.