A vulnerability in the detection engine of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, adjacent attacker to send data directly to the kernel of an affected device. The vulnerability exists because the software improperly filters Ethernet frames sent to an affected device. An attacker could exploit this vulnerability by sending crafted packets to the management interface of an affected device. A successful exploit could allow the attacker to bypass the Layer 2 (L2) filters and send data directly to the kernel of the affected device. A malicious frame successfully delivered would make the target device generate a specific syslog entry.

A vulnerability in certain access control mechanisms for the Secure Shell (SSH) server implementation for Cisco Wireless LAN Controller (WLC) Software could allow an unauthenticated, adjacent attacker to access a CLI instance on an affected device. The vulnerability is due to a lack of proper input- and validation-checking mechanisms for inbound SSH connections on an affected device. An attacker could exploit this vulnerability by attempting to establish an SSH connection to an affected controller. An exploit could allow the attacker to access an affected device's CLI to potentially cause further attacks. This vulnerability has been fixed in version 8.5(140.0).

A vulnerability in the access-control logic of the NETCONF over Secure Shell (SSH) of Cisco IOS XR Software may allow connections despite an access control list (ACL) that is configured to deny access to the NETCONF over SSH of an affected device. The vulnerability is due to a missing check in the NETCONF over SSH access control list (ACL). An attacker could exploit this vulnerability by connecting to an affected device using NETCONF over SSH. A successful exploit could allow the attacker to connect to the device on the NETCONF port. Valid credentials are required to access the device. This vulnerability does not affect connections to the default SSH process on the device.

A vulnerability in the TCP flags inspection feature for access control lists (ACLs) on Cisco ASR 9000 Series Aggregation Services Routers could allow an unauthenticated, remote attacker to bypass protection offered by a configured ACL on an affected device. The vulnerability is due to incorrect processing of the ACL applied to an interface of an affected device when Cisco Express Forwarding load balancing using the 3-tuple hash algorithm is enabled. An attacker could exploit this vulnerability by sending traffic through an affected device that should otherwise be denied by the configured ACL. An exploit could allow the attacker to bypass protection offered by a configured ACL on the affected device. There are workarounds that address this vulnerability. Affected Cisco IOS XR versions are: Cisco IOS XR Software Release 5.1.1 and later till first fixed. First Fixed Releases: 6.5.2 and later, 6.6.1 and later.

A vulnerability in the web management interface of Cisco AsyncOS Software for Cisco Web Security Appliance (WSA) could allow an authenticated, remote attacker to perform an unauthorized system reset on an affected device. The vulnerability is due to improper authorization controls for a specific URL in the web management interface. An attacker could exploit this vulnerability by sending a crafted HTTP request to an affected device. A successful exploit could have a twofold impact: the attacker could either change the administrator password, gaining privileged access, or reset the network configuration details, causing a denial of service (DoS) condition. In both scenarios, manual intervention is required to restore normal operations.

A vulnerability in the hxterm service of Cisco HyperFlex Software could allow an unauthenticated, local attacker to gain root access to all nodes in the cluster. The vulnerability is due to insufficient authentication controls. An attacker could exploit this vulnerability by connecting to the hxterm service as a non-privileged, local user. A successful exploit could allow the attacker to gain root access to all member nodes of the HyperFlex cluster. This vulnerability affects Cisco HyperFlex Software Releases prior to 3.5(2a).

A vulnerability in the application environment of Cisco Data Center Network Manager (DCNM) could allow an authenticated, remote attacker to gain unauthorized access to the JBoss Enterprise Application Platform (JBoss EAP) on an affected device. The vulnerability is due to an incorrect configuration of the authentication settings on the JBoss EAP. An attacker could exploit this vulnerability by authenticating with a specific low-privilege account. A successful exploit could allow the attacker to gain unauthorized access to the JBoss EAP, which should be limited to internal system accounts.

A vulnerability in the Graphite service of Cisco HyperFlex software could allow an unauthenticated, remote attacker to retrieve data from the Graphite service. The vulnerability is due to insufficient authentication controls. An attacker could exploit this vulnerability by sending crafted requests to the Graphite service. A successful exploit could allow the attacker to retrieve any statistics from the Graphite service. Versions prior to 3.5(2a) are affected.

A vulnerability in the CLI of Cisco TelePresence Collaboration Endpoint (CE) and Cisco RoomOS Software could allow an authenticated, local attacker to enable audio recording without notifying users. The vulnerability is due to the presence of unnecessary debug commands. An attacker could exploit this vulnerability by gaining unrestricted access to the restricted shell and using the specific debug commands. A successful exploit could allow the attacker to enable the microphone of an affected device to record audio without notifying users.

A vulnerability in the web-based management interface of Cisco Data Center Network Manager (DCNM) could allow an unauthenticated, remote attacker to retrieve sensitive information from an affected device. The vulnerability is due to improper access controls for certain URLs on affected DCNM software. An attacker could exploit this vulnerability by connecting to the web-based management interface of an affected device and requesting specific URLs. A successful exploit could allow the attacker to download log files and diagnostic information from the affected device.

A vulnerability in the filesystem permissions of Cisco NX-OS Software could allow an authenticated, local attacker to gain read and write access to a critical configuration file. The vulnerability is due to a failure to impose strict filesystem permissions on the targeted device. An attacker could exploit this vulnerability by accessing and modifying restricted files. A successful exploit could allow an attacker to use the content of this configuration file to bypass authentication and log in as any user of the device. MDS 9000 Series Multilayer Switches are affected in versions prior to 6.2(25), 8.1(1b), and 8.3(1). Nexus 3000 Series Switches are affected in versions prior to 7.0(3)I4(9) and 7.0(3)I7(4). Nexus 3500 Platform Switches are affected in versions prior to 6.0(2)A8(10) and 7.0(3)I7(4). Nexus 3600 Platform Switches are affected in versions prior to 7.0(3)F3(5). Nexus 2000, 5500, 5600, and 6000 Series Switches are affected in versions prior to 7.1(5)N1(1b) and 7.3(3)N1(1). Nexus 7000 and 7700 Series Switches are affected in versions prior to 6.2(22), 7.3(3)D1(1), and 8.2(3). Nexus 9000 Series Switches-Standalone are affected in versions prior to 7.0(3)I4(9) and 7.0(3)I7(4). Nexus 9500 R-Series Line Cards and Fabric Modules are affected in versions prior to 7.0(3)F3(5).

A vulnerability in the Simple Object Access Protocol (SOAP) of Cisco TelePresence Management Suite (TMS) software could allow an unauthenticated, remote attacker to gain unauthorized access to an affected device. The vulnerability is due to a lack of proper access and authentication controls on the affected TMS software. An attacker could exploit this vulnerability by gaining access to internal, trusted networks to send crafted SOAP calls to the affected device. If successful, an exploit could allow the attacker to access system management tools. Under normal circumstances, this access should be prohibited.

A vulnerability in the web-based management interface of Cisco Data Center Network Manager (DCNM) could allow an unauthenticated, remote attacker to bypass authentication and execute arbitrary actions with administrative privileges on an affected device. The vulnerability is due to improper session management on affected DCNM software. An attacker could exploit this vulnerability by sending a crafted HTTP request to the affected device. A successful exploit could allow the attacker to gain administrative access on the affected device.

A vulnerability in the Cisco SD-WAN Solution could allow an authenticated, adjacent attacker to bypass authentication and have direct unauthorized access to other vSmart containers. The vulnerability is due to an insecure default configuration of the affected system. An attacker could exploit this vulnerability by directly connecting to the exposed services. An exploit could allow the attacker to retrieve and modify critical system files.

A vulnerability in the lobby ambassador web interface of Cisco IOS XE Wireless Controller Software could allow an authenticated, remote attacker to remove arbitrary users that are defined on an affected device. This vulnerability is due to insufficient access control of actions executed by lobby ambassador users. An attacker could exploit this vulnerability by logging in to an affected device with a lobby ambassador user account and sending crafted HTTP requests to the API. A successful exploit could allow the attacker to delete arbitrary user accounts on the device, including users with administrative privileges. Note: This vulnerability is exploitable only if the attacker obtains the credentials for a lobby ambassador account. This account is not configured by default.

A vulnerability in Cisco Catalyst Center, formerly Cisco DNA Center, could allow an authenticated, remote attacker to read and modify data in a repository that belongs to an internal service of an affected device. This vulnerability is due to insufficient enforcement of access control on HTTP requests. An attacker could exploit this vulnerability by submitting a crafted HTTP request to an affected device. A successful exploit could allow the attacker to read and modify data that is handled by an internal service on the affected device.

A vulnerability in the logic that handles access control to one of the hardware components in Cisco's proprietary Secure Boot implementation could allow an authenticated, local attacker to write a modified firmware image to the component. This vulnerability affects multiple Cisco products that support hardware-based Secure Boot functionality. The vulnerability is due to an improper check on the area of code that manages on-premise updates to a Field Programmable Gate Array (FPGA) part of the Secure Boot hardware implementation. An attacker with elevated privileges and access to the underlying operating system that is running on the affected device could exploit this vulnerability by writing a modified firmware image to the FPGA. A successful exploit could either cause the device to become unusable (and require a hardware replacement) or allow tampering with the Secure Boot verification process, which under some circumstances may allow the attacker to install and boot a malicious software image. An attacker will need to fulfill all the following conditions to attempt to exploit this vulnerability: Have privileged administrative access to the device. Be able to access the underlying operating system running on the device; this can be achieved either by using a supported, documented mechanism or by exploiting another vulnerability that would provide an attacker with such access. Develop or have access to a platform-specific exploit. An attacker attempting to exploit this vulnerability across multiple affected platforms would need to research each one of those platforms and then develop a platform-specific exploit. Although the research process could be reused across different platforms, an exploit developed for a given hardware platform is unlikely to work on a different hardware platform.

A vulnerability in the Cloud Connect component of Cisco Unified Contact Center Enterprise (CCE) could allow an unauthenticated, remote attacker to read and modify data on an affected device. This vulnerability is due to a lack of proper authentication controls. An attacker could exploit this vulnerability by sending crafted TCP data to a specific port on an affected device. A successful exploit could allow the attacker to read or modify data on the affected device.

A vulnerability in the implementation of access control rules for loopback interfaces in Cisco Secure Firewall Adaptive Security Appliance (ASA) Software and Cisco Secure Firewall Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to send traffic that should have been blocked to a loopback interface. This vulnerability is due to improper enforcement of access control rules for loopback interfaces. An attacker could exploit this vulnerability by sending traffic to a loopback interface on an affected device. A successful exploit could allow the attacker to bypass configured access control rules and send traffic that should have been blocked to a loopback interface on the device.

A vulnerability in the hybrid access control list (ACL) processing of IPv4 packets in Cisco IOS XR Software could allow an unauthenticated, remote attacker to bypass a configured ACL. This vulnerability is due to incorrect handling of packets when a specific configuration of the hybrid ACL exists. An attacker could exploit this vulnerability by attempting to send traffic through an affected device. A successful exploit could allow the attacker to bypass a configured ACL on the affected device. For more information, see the section of this advisory. Cisco has released software updates that address this vulnerability. There are workarounds that address this vulnerability.

A vulnerability in the GUI of Cisco Identity Services Engine (ISE) could allow an authenticated, remote attacker with administrative privileges to upload files to an affected device. This vulnerability is due to improper validation of the file copy function. An attacker could exploit this vulnerability by sending a crafted file upload using the Cisco ISE GUI. A successful exploit could allow the attacker to upload arbitrary files to an affected system.

A vulnerability in the web-based management interface of Cisco Identity Services Engine (ISE) could allow an authenticated, remote attacker to bypass authorization and access sensitive information related to the device. The vulnerability exists because the software fails to sanitize URLs before it handles requests. An attacker could exploit this vulnerability by submitting a crafted URL. A successful exploit could allow the attacker to gain unauthorized access to sensitive information.

A vulnerability in the API of Cisco Identity Services Engine (ISE) and Cisco ISE Passive Identity Connector (ISE-PIC) could allow an authenticated, remote attacker with administrative privileges to upload files to an affected device. This vulnerability is due to improper validation of the file copy function. An attacker could exploit this vulnerability by sending a crafted file upload request to a specific API endpoint. A successful exploit could allow the attacker to upload arbitrary files to an affected system.

A vulnerability in the access control list (ACL) programming of Cisco IOS Software that is running on Cisco Catalyst 1000 Switches and Cisco Catalyst 2960L Switches could allow an unauthenticated, remote attacker to bypass a configured ACL. This vulnerability is due to the use of both an IPv4 ACL and a dynamic ACL of IP Source Guard on the same interface, which is an unsupported configuration. An attacker could exploit this vulnerability by attempting to send traffic through an affected device. A successful exploit could allow the attacker to bypass an ACL on the affected device. Note: Cisco documentation has been updated to reflect that this is an unsupported configuration. However, Cisco is publishing this advisory because the device will not prevent an administrator from configuring both features on the same interface. There are no plans to implement the ability to configure both features on the same interface on Cisco Catalyst 1000 or Catalyst 2960L Switches.

A vulnerability in Cisco Aironet Access Points (APs) Software could allow an unauthenticated, remote attacker to gain unauthorized access to a targeted device with elevated privileges. The vulnerability is due to insufficient access control for certain URLs on an affected device. An attacker could exploit this vulnerability by requesting specific URLs from an affected AP. An exploit could allow the attacker to gain access to the device with elevated privileges. While the attacker would not be granted access to all possible configuration options, it could allow the attacker to view sensitive information and replace some options with values of their choosing, including wireless network configuration. It would also allow the attacker to disable the AP, creating a denial of service (DoS) condition for clients associated with the AP.

The PPP implementation in Cisco IOS 12.2 and 15.0 through 15.2, when Point-to-Point Termination and Aggregation (PTA) and L2TP are used, allows remote attackers to cause a denial of service (device crash) via crafted network traffic, aka Bug ID CSCtf71673.

A vulnerability in the IOx application environment for Cisco IOS Software could allow an authenticated, remote attacker to gain unauthorized access to the Guest Operating System (Guest OS) running on an affected device. The vulnerability is due to incorrect role-based access control (RBAC) evaluation when a low-privileged user requests access to a Guest OS that should be restricted to administrative accounts. An attacker could exploit this vulnerability by authenticating to the Guest OS by using the low-privileged-user credentials. An exploit could allow the attacker to gain unauthorized access to the Guest OS as a root user.

A vulnerability in the application policy configuration of the Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to gain unauthorized read access to sensitive data. The vulnerability is due to insufficient application identification. An attacker could exploit this vulnerability by sending crafted traffic to an affected device. A successful exploit could allow the attacker to gain unauthorized read access to sensitive data.

Multiple vulnerabilities in Cisco Enterprise NFV Infrastructure Software (NFVIS) could allow an attacker to escape from the guest virtual machine (VM) to the host machine, inject commands that execute at the root level, or leak system data from the host to the VM. For more information about these vulnerabilities, see the Details section of this advisory.

A vulnerability in the administrative web interface of Cisco Identity Services Engine (ISE) could allow an authenticated, remote attacker to gain additional privileges on an affected device. The vulnerability is due to improper controls on certain pages in the web interface. An attacker could exploit this vulnerability by authenticating to the device with an administrator account and sending a crafted HTTP request. A successful exploit could allow the attacker to create additional Admin accounts with different user roles. An attacker could then use these accounts to perform actions within their scope. The attacker would need valid Admin credentials for the device. This vulnerability cannot be exploited to add a Super Admin account.

A vulnerability in the per-user-override feature of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to bypass an access control list (ACL) that is configured for an interface of an affected device. The vulnerability is due to errors that could occur when the affected software constructs and applies per-user-override rules. An attacker could exploit this vulnerability by connecting to a network through an affected device that has a vulnerable configuration. A successful exploit could allow the attacker to access resources that are behind the affected device and would typically be protected by the interface ACL.

A vulnerability in the authentication and authorization checking mechanisms of Cisco Wireless LAN Controller (WLC) Software could allow an authenticated, adjacent attacker to gain network access to a Cisco TrustSec domain. Under normal circumstances, this access should be prohibited. The vulnerability is due to the dynamic assignment of Security Group Tags (SGTs) during a wireless roam from one Service Set Identifier (SSID) to another within the Cisco TrustSec domain. An attacker could exploit this vulnerability by attempting to acquire an SGT from other SSIDs within the domain. Successful exploitation could allow the attacker to gain privileged network access that should be prohibited under normal circumstances.

A vulnerability in the Disaster Recovery framework of Cisco Unified Communications Manager (Unified CM), Cisco Unified Communications Manager IM & Presence Service (Unified CM IM&P), and Cisco Unity Connection could allow an authenticated, remote attacker to perform certain administrative actions they should not be able to. This vulnerability is due to insufficient access control checks on the affected device. An attacker with read-only privileges could exploit this vulnerability by executing a specific vulnerable command on an affected device. A successful exploit could allow the attacker to perform a set of administrative actions they should not be able to.

Multiple vulnerabilities in Cisco Enterprise NFV Infrastructure Software (NFVIS) could allow an attacker to escape from the guest virtual machine (VM) to the host machine, inject commands that execute at the root level, or leak system data from the host to the VM. For more information about these vulnerabilities, see the Details section of this advisory.

A vulnerability in the CLI of Cisco SD-WAN Software could allow an authenticated, local attacker to gain escalated privileges. This vulnerability is due to improper access control on files within the affected system. A local attacker could exploit this vulnerability by modifying certain files on the vulnerable device. If successful, the attacker could gain escalated privileges and take actions on the system with the privileges of the root user.

A vulnerability in the Graphite web interface of the Policy and Charging Rules Function (PCRF) of Cisco Policy Suite (CPS) could allow an unauthenticated, remote attacker to access the Graphite web interface. The attacker would need to have access to the internal VLAN where CPS is deployed. The vulnerability is due to lack of authentication. An attacker could exploit this vulnerability by directly connecting to the Graphite web interface. An exploit could allow the attacker to access various statistics and Key Performance Indicators (KPIs) regarding the Cisco Policy Suite environment.

A vulnerability in the Stealthwatch Management Console (SMC) of Cisco Stealthwatch Enterprise could allow an unauthenticated, remote attacker to bypass authentication and execute arbitrary actions with administrative privileges on an affected system. The vulnerability is due to an insecure system configuration. An attacker could exploit this vulnerability by sending a crafted HTTP request to the targeted application. An exploit could allow the attacker to gain unauthenticated access, resulting in elevated privileges in the SMC.

A vulnerability in the configuration file protections of Cisco Virtualized Infrastructure Manager (VIM) could allow an authenticated, local attacker to access confidential information and elevate privileges on an affected device. This vulnerability is due to improper access permissions for certain configuration files. An attacker with low-privileged credentials could exploit this vulnerability by accessing an affected device and reading the affected configuration files. A successful exploit could allow the attacker to obtain internal database credentials, which the attacker could use to view and modify the contents of the database. The attacker could use this access to the database to elevate privileges on the affected device.

A vulnerability in the binding configuration of Cisco SD-WAN vManage Software containers could allow an unauthenticated, adjacent attacker who has access to the VPN0 logical network to also access the messaging service ports on an affected system. This vulnerability exists because the messaging server container ports on an affected system lack sufficient protection mechanisms. An attacker could exploit this vulnerability by connecting to the messaging service ports of the affected system. To exploit this vulnerability, the attacker must be able to send network traffic to interfaces within the VPN0 logical network. This network may be restricted to protect logical or physical adjacent networks, depending on device deployment configuration. A successful exploit could allow the attacker to view and inject messages into the messaging service, which can cause configuration changes or cause the system to reload.

A vulnerability in the shell access request mechanism of Cisco IOS XE Software could allow an authenticated, local attacker to bypass authentication and gain unrestricted access to the root shell of an affected device. The vulnerability exists because the affected software has insufficient authentication mechanisms for certain commands. An attacker could exploit this vulnerability by requesting access to the root shell of an affected device, after the shell access feature has been enabled. A successful exploit could allow the attacker to bypass authentication and gain unrestricted access to the root shell of the affected device.

A vulnerability in the configuration and management service of the Cisco SD-WAN Solution could allow an authenticated, remote attacker to execute arbitrary code with vmanage user privileges or cause a denial of service (DoS) condition on an affected system. The vulnerability is due to insufficient access restrictions to the HTTP management interface of the affected solution. An attacker could exploit this vulnerability by sending a malicious HTTP request to the affected management service through an authenticated device. A successful exploit could allow the attacker to execute arbitrary code with vmanage user privileges or stop HTTP services on an affected system. This vulnerability affects the following Cisco products if they are running a release of the Cisco SD-WAN Solution prior to Release 18.3.0: vBond Orchestrator Software, vEdge 100 Series Routers, vEdge 1000 Series Routers, vEdge 2000 Series Routers, vEdge 5000 Series Routers, vEdge Cloud Router Platform, vManage Network Management Software, vSmart Controller Software. Cisco Bug IDs: CSCvi69976.

A vulnerability in the account management subsystem of Cisco Web Security Appliance (WSA) could allow an authenticated, local attacker to elevate privileges to root. The attacker must authenticate with valid administrator credentials. The vulnerability is due to improper implementation of access controls. An attacker could exploit this vulnerability by authenticating to the device as a specific user to gain the information needed to elevate privileges to root in a separate login shell. A successful exploit could allow the attacker to escape the CLI subshell and execute system-level commands on the underlying operating system as root. Cisco Bug IDs: CSCvj93548.

A vulnerability in the anti-spam protection mechanisms of Cisco AsyncOS Software for the Cisco Email Security Appliance (ESA) could allow an unauthenticated, remote attacker to bypass certain content filters on an affected device. The vulnerability is due to incomplete input and validation checking mechanisms for certain Sender Policy Framework (SPF) messages that are sent to an affected device. An attacker could exploit this vulnerability by sending a customized SPF packet to an affected device. If successful, an exploit could allow the attacker to bypass the URL filters that are configured for the affected device, which could allow malicious URLs to pass through the device.

A vulnerability in certain authentication controls in the account services of Cisco Spark could allow an authenticated, remote attacker to interact with and view information on an affected device that would normally be prohibited. The vulnerability is due to the improper display of user-account tokens generated in the system. An attacker could exploit this vulnerability by logging in to the device with a token in use by another account. Successful exploitation could allow the attacker to cause a partial impact to the device's confidentiality, integrity, and availability. Cisco Bug IDs: CSCvg05206.

A vulnerability in the access control logic of the Secure Shell (SSH) server of Cisco IOS and IOS XE Software may allow connections sourced from a virtual routing and forwarding (VRF) instance despite the absence of the vrf-also keyword in the access-class configuration. The vulnerability is due to a missing check in the SSH server. An attacker could use this vulnerability to open an SSH connection to an affected Cisco IOS or IOS XE device with a source address belonging to a VRF instance. Once connected, the attacker would still need to provide valid credentials to access the device.

A vulnerability in Cisco Webex Teams, formerly Cisco Spark, could allow an authenticated, remote attacker to view and modify data for an organization other than their own organization. The vulnerability exists because the affected software performs insufficient checks for associations between user accounts and organization accounts. An attacker who has administrator or compliance officer privileges for one organization account could exploit this vulnerability by using those privileges to view and modify data for another organization account. No customer data was impacted by this vulnerability.

A vulnerability in the web application of Cisco Common Services Platform Collector (CSPC) could allow an authenticated, remote attacker to specify non-log files as sources for syslog reporting. This vulnerability is due to improper restriction of the syslog configuration. An attacker could exploit this vulnerability by configuring non-log files as sources for syslog reporting through the web application. A successful exploit could allow the attacker to read non-log files on the CSPC.