Multiple vulnerabilities in the web UI of Cisco Smart Software Manager Satellite could allow an unauthenticated, remote attacker to execute arbitrary commands on the underlying operating system. For more information about these vulnerabilities, see the Details section of this advisory.

Multiple vulnerabilities in the web-based management interface of Cisco HyperFlex HX could allow an unauthenticated, remote attacker to perform command injection attacks against an affected device. For more information about these vulnerabilities, see the Details section of this advisory.

Mailcwp remote file upload vulnerability incomplete fix v1.100

A command Injection in ps package versions <1.0.0 for Node.js allowed arbitrary commands to be executed when attacker controls the PID.

The web interface on FASTGate Fastweb devices with firmware through 0.00.47_FW_200_Askey 2017-05-17 (software through 1.0.1b) exposed a CGI binary that is vulnerable to a command injection vulnerability that can be exploited to achieve remote code execution with root privileges. No authentication is required in order to trigger the vulnerability.

The test connection functionality in the NetAudit section of Opsview Monitor before 5.3.1 and 5.4.x before 5.4.2 is vulnerable to command injection due to improper sanitization of the rancid_password parameter.

RICOH Interactive Whiteboard D2200 V1.6 to V2.2, D5500 V1.6 to V2.2, D5510 V1.6 to V2.2, and the display versions with RICOH Interactive Whiteboard Controller Type1 V1.6 to V2.2 attached (D5520, D6500, D6510, D7500, D8400) allows remote attackers to execute arbitrary commands via unspecified vectors.

Haraka version 2.8.8 and earlier comes with a plugin for processing attachments for zip files. Versions 2.8.8 and earlier can be vulnerable to command injection.

An issue was discovered on Foscam Opticam i5 devices with System Firmware 1.5.2.11 and Application Firmware 2.21.1.128. The ONVIF devicemgmt SetDNS method allows remote attackers to execute arbitrary OS commands via the IPv4Address field.

Multiple vulnerabilities in the web UI of Cisco Smart Software Manager Satellite could allow an unauthenticated, remote attacker to execute arbitrary commands on the underlying operating system. For more information about these vulnerabilities, see the Details section of this advisory.

In modules/HELPBOT_MODULE in Budabot 0.6 through 4.0, lax syntax validation allows remote attackers to perform a command injection attack against the PHP daemon with a crafted command, resulting in a denial of service or possibly unspecified other impact, as demonstrated by the "!calc 5 x 5" command. In versions before 3.0, modules/HELPBOT_MODULE/calc.php has the vulnerable code; in 3.0 and above, modules/HELPBOT_MODULE/HelpbotController.class.php has the vulnerable code.

System command injection in the /DroboAccess/delete_user endpoint in Drobo 5N2 NAS version 4.0.5-13.28.96115 allows unauthenticated attackers to execute system commands via the "username" URL parameter.

System command injection in the /DroboPix/api/drobopix/demo endpoint on Drobo 5N2 NAS version 4.0.5-13.28.96115 allows unauthenticated attackers to execute system commands via the payload in a POST request.

The Python CGI scripts in PWS in Imperva SecureSphere 13.0.10, 13.1.10, and 13.2.10 allow remote attackers to execute arbitrary OS commands because command-line arguments are mishandled.

System command injection in the /DroboAccess/enable_user endpoint in Drobo 5N2 NAS version 4.0.5-13.28.96115 allows unauthenticated attackers to execute system commands via the "username" URL parameter.

Western Digital WD My Book Live and WD My Book Live Duo (all versions) have a root Remote Command Execution bug via shell metacharacters in the /api/1.0/rest/language_configuration language parameter. It can be triggered by anyone who knows the IP address of the affected device, as exploited in the wild in June 2021 for factory reset commands,

Shell Metacharacter Injection in www/modules/save.php in FruityWifi (aka PatatasFritas/PatataWifi) through 2.4 allows remote attackers to execute arbitrary code with root privileges via a crafted mod_name parameter in a POST request. NOTE: unlike in CVE-2018-17317, the attacker does not need a valid session.

Command Injection vulnerability in QTS 4.3.5 build 20181013, QTS 4.3.4 build 20181008, QTS 4.3.3 build 20180829, QTS 4.2.6 build 20180829 and earlier versions could allow remote attackers to run arbitrary commands on the NAS.

An issue was discovered on D-Link DIR-816 A2 1.10 B05 devices. An HTTP request parameter is used in command string construction in the handler function of the /goform/Diagnosis route. This could lead to command injection via shell metacharacters in the sendNum parameter.

An issue was discovered on Tenda AC7 devices with firmware through V15.03.06.44_CN(AC7), AC9 devices with firmware through V15.03.05.19(6318)_CN(AC9), and AC10 devices with firmware through V15.03.06.23_CN(AC10). A command Injection vulnerability allows attackers to execute arbitrary OS commands via a crafted goform/setUsbUnload request. This occurs because the "formsetUsbUnload" function executes a dosystemCmd function with untrusted input.

FruityWifi (aka PatatasFritas/PatataWifi) 2.1 allows remote attackers to execute arbitrary commands via shell metacharacters in the io_mode, ap_mode, io_action, io_in_iface, io_in_set, io_in_ip, io_in_mask, io_in_gw, io_out_iface, io_out_set, io_out_mask, io_out_gw, iface, or domain parameter to /www/script/config_iface.php, or the newSSID, hostapd_secure, hostapd_wpa_passphrase, or supplicant_ssid parameter to /www/page_config.php.

git-fastclone before 1.0.5 passes user modifiable strings directly to a shell command. An attacker can execute malicious commands by modifying the strings that are passed as arguments to "cd " and "git clone " commands in the library.

An unvalidated REST API in the AppFormix Agent of Juniper Networks AppFormix allows an unauthenticated remote attacker to execute commands as root on the host running the AppFormix Agent, when certain preconditions are performed by the attacker, thus granting the attacker full control over the environment. This issue affects: Juniper Networks AppFormix 3 versions prior to 3.1.22, 3.2.14, 3.3.0.

picocom before 2.0 has a command injection vulnerability in the 'send and receive file' command because the command line is executed by /bin/sh unsafely.

upgrade_handle.php on NUUO NVRmini devices allows Remote Command Execution via shell metacharacters in the uploaddir parameter for a writeuploaddir command.

It was found that ceph-isci-cli package as shipped by Red Hat Ceph Storage 2 and 3 is using python-werkzeug in debug shell mode. This is done by setting debug=True in file /usr/bin/rbd-target-api provided by ceph-isci-cli package. This allows unauthenticated attackers to access this debug shell and escalate privileges. Once an attacker has successfully connected to this debug shell they will be able to execute arbitrary commands remotely. These commands will run with the same privileges as of user executing the application which is using python-werkzeug with debug shell mode enabled. In - Red Hat Ceph Storage 2 and 3, ceph-isci-cli package runs python-werkzeug library with root level permissions.

An OS command injection issue exists in Nimesa Backup and Recovery v2.3 and v2.4. If this vulnerability is exploited, an arbitrary OS commands may be executed on the server where the product is running.

ELTEX NTP-RG-1402G 1v10 3.25.3.32 devices allow OS command injection via the PING field of the resource ping.cmd. The NTP-2 device is also affected.

System command injection in formAliasIp in TOTOLINK A3002RU version 1.0.8 allows attackers to execute system commands via the "subnet" POST parameter.

The Web Console in Commvault Edge Server 10 R2 allows remote attackers to execute arbitrary OS commands via crafted serialized data in a cookie.

Multiple ZyXEL network-attached storage (NAS) devices running firmware version 5.21 contain a pre-authentication command injection vulnerability, which may allow a remote, unauthenticated attacker to execute arbitrary code on a vulnerable device. ZyXEL NAS devices achieve authentication by using the weblogin.cgi CGI executable. This program fails to properly sanitize the username parameter that is passed to it. If the username parameter contains certain characters, it can allow command injection with the privileges of the web server that runs on the ZyXEL device. Although the web server does not run as the root user, ZyXEL devices include a setuid utility that can be leveraged to run any command with root privileges. As such, it should be assumed that exploitation of this vulnerability can lead to remote code execution with root privileges. By sending a specially-crafted HTTP POST or GET request to a vulnerable ZyXEL device, a remote, unauthenticated attacker may be able to execute arbitrary code on the device. This may happen by directly connecting to a device if it is directly exposed to an attacker. However, there are ways to trigger such crafted requests even if an attacker does not have direct connectivity to a vulnerable devices. For example, simply visiting a website can result in the compromise of any ZyXEL device that is reachable from the client system. Affected products include: NAS326 before firmware V5.21(AAZF.7)C0 NAS520 before firmware V5.21(AASZ.3)C0 NAS540 before firmware V5.21(AATB.4)C0 NAS542 before firmware V5.21(ABAG.4)C0 ZyXEL has made firmware updates available for NAS326, NAS520, NAS540, and NAS542 devices. Affected models that are end-of-support: NSA210, NSA220, NSA220+, NSA221, NSA310, NSA310S, NSA320, NSA320S, NSA325 and NSA325v2

Shell Metacharacter Injection in the SSH configuration interface on Grandstream GXP16xx VoIP 1.0.4.128 phones allows attackers to execute arbitrary system commands and gain a root shell.

ELTEX NTP-RG-1402G 1v10 3.25.3.32 devices allow OS command injection via the TRACE field of the resource ping.cmd. The NTP-2 device is also affected.

TimeTools SC7105 1.0.007, SC9205 1.0.007, SC9705 1.0.007, SR7110 1.0.007, SR9210 1.0.007, SR9750 1.0.007, SR9850 1.0.007, T100 1.0.003, T300 1.0.003, and T550 1.0.003 devices allow remote attackers to execute arbitrary OS commands via shell metacharacters in the t3.cgi srmodel or srtime parameter.

DrayTek Vigor2960 1.3.1_Beta, Vigor3900 1.4.4_Beta, and Vigor300B 1.3.3_Beta, 1.4.2.1_Beta, and 1.4.4_Beta devices allow remote code execution as root (without authentication) via shell metacharacters to the cgi-bin/mainfunction.cgi URI. This issue has been fixed in Vigor3900/2960/300B v1.5.1.

Post Oak AWAM Bluetooth Field Device 7400v2.08.21.2018, 7800SD.2015.1.16, 2011.3, 7400v2.02.01.2019, and 7800SD.2012.12.5 is vulnerable to injections of operating system commands through timeconfig.py via shell metacharacters in the htmlNtpServer parameter.

Eval injection vulnerability in the fm_saveHelperGatherItems function in ajax.php in the Form Manager plugin before 1.7.3 for WordPress allows remote attackers to execute arbitrary code via unspecified vectors.

Iteris Vantage Velocity Field Unit 2.3.1, 2.4.2, and 3.0 devices allow the injection of OS commands into cgi-bin/timeconfig.py via shell metacharacters in the NTP Server field.

fs-path node module before 0.0.25 is vulnerable to command injection by way of user-supplied inputs via the `copy`, `copySync`, `remove`, and `removeSync` methods.

The login page of the server on Huawei FusionServer rack servers RH2288 V3 with software before V100R003C00SPC603, RH2288H V3 with software before V100R003C00SPC503, XH628 V3 with software before V100R003C00SPC602, RH1288 V3 with software before V100R003C00SPC602, RH2288A V2 with software before V100R002C00SPC701, RH1288A V2 with software before V100R002C00SPC502, RH8100 V3 with software before V100R003C00SPC110, CH222 V3 with software before V100R001C00SPC161, CH220 V3 with software before V100R001C00SPC161, and CH121 V3 with software before V100R001C00SPC161 allows remote attackers to bypass access restrictions and enter commands via unspecified parameters, as demonstrated by a "user creation command."

System command injection in formDlna in TOTOLINK A3002RU version 1.0.8 allows attackers to execute system commands via the "sambaUser" POST parameter.

A vulnerability exists that could allow the execution of operating system commands on systems running MiPlatform 2019.05.16 and earlier. An attacker could execute arbitrary remote command by sending parameters to WinExec function in ExtCommandApi.dll module of MiPlatform.

The web application on Xerox AltaLink B80xx before 100.008.028.05200, C8030/C8035 before 100.001.028.05200, C8045/C8055 before 100.002.028.05200, and C8070 before 100.003.028.05200 allows unauthenticated command injection.

OS command injection in the AP mode settings feature in /cgi-bin/luci /api/misystem/set_router_wifiap on Xiaomi R3D before 2.26.4 devices allows an attacker to execute any command via crafted JSON data.

An issue was discovered on KT Slim egg IML500 (R7283, R8112, R8424) and IML520 (R8112, R8368, R8411) wifi device. This issue is a command injection allowing attackers to execute arbitrary OS commands.

Insufficient input validation in npm package `jison` <= 0.4.18 may lead to OS command injection attacks.

A Command Injection issue was discovered in Citrix SD-WAN 10.1.0 and NetScaler SD-WAN 9.3.x before 9.3.6 and 10.0.x before 10.0.4.

In BIG-IQ 6.0.0-7.0.0, a remote access vulnerability has been discovered that may allow a remote user to execute shell commands on affected systems using HTTP requests to the BIG-IQ user interface.

The initialize method in the Histogram class in lib/colorscore/histogram.rb in the colorscore gem before 0.0.5 for Ruby allows context-dependent attackers to execute arbitrary code via shell metacharacters in the (1) image_path, (2) colors, or (3) depth variable.

D-Link DCH-M225 1.05b01 and earlier devices allow remote attackers to execute arbitrary OS commands via shell metacharacters in the spotifyConnect.php userName parameter.