Shell Metacharacter Injection in www/modules/save.php in FruityWifi (aka PatatasFritas/PatataWifi) through 2.4 allows remote attackers to execute arbitrary code with root privileges via a crafted mod_name parameter in a POST request. NOTE: unlike in CVE-2018-17317, the attacker does not need a valid session.

A remote code execution vulnerability is identified in FruityWifi through 2.4. Due to improperly escaped shell metacharacters obtained from the POST request at the page_config_adv.php page, it is possible to perform remote code execution by an authenticated attacker. This is similar to CVE-2018-17317.

A vulnerability, which was classified as critical, was found in Vaelsys 4.1.0. This affects the function execute_DataObjectProc of the file /grid/vgrid_server.php. The manipulation of the argument xajaxargs leads to os command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

Main_Analysis_Content.asp in /apply.cgi on ASUS RT-AC66U, RT-AC68U, RT-AC86U, RT-AC88U, RT-AC1900, RT-AC2900, and RT-AC3100 devices before 3.0.0.4.384_10007; RT-N18U devices before 3.0.0.4.382.39935; RT-AC87U and RT-AC3200 devices before 3.0.0.4.382.50010; and RT-AC5300 devices before 3.0.0.4.384.20287 allows OS command injection via the pingCNT and destIP fields of the SystemCmd variable.

An unspecified function in the web interface in Proofpoint Messaging Security Gateway 6.2.0.263:6.2.0.237 and earlier in Proofpoint Protection Server 5.5.3, 5.5.4, 5.5.5, 6.0.2, 6.1.1, and 6.2.0 allows remote attackers to execute arbitrary commands via unknown vectors, related to a "command injection" issue.

A remote code execution issue was discovered in Zoho ManageEngine Applications Manager before 13.6 (build 13640). The publicly accessible testCredential.do endpoint takes multiple user inputs and validates supplied credentials by accessing a specified system. This endpoint calls several internal classes, and then executes a PowerShell script. If the specified system is OfficeSharePointServer, then the username and password parameters to this script are not validated, leading to Command Injection.

The VBWinExec function in Node\AspVBObj.dll in Advantech WebAccess 8.3.0 allows remote attackers to execute arbitrary OS commands via a single argument (aka the command parameter).

An issue was discovered in ClipBucket before 4.0.0 Release 4902. Any OS commands can be injected via shell metacharacters in the file_name parameter to /api/file_uploader.php or /actions/file_downloader.php.

A Vulnerability in Brocade Network Advisor versions before 14.1.0 could allow a remote unauthenticated attacker to execute arbitray code. The vulnerability could also be exploited to execute arbitrary OS Commands.

A vulnerability was identified in D-Link DIR-860L 2.04.B04. This affects the function ssdpcgi_main of the file htdocs/cgibin of the component Simple Service Discovery Protocol. The manipulation leads to os command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

The npm module "shell-quote" 1.6.0 and earlier cannot correctly escape ">" and "<" operator used for redirection in shell. Applications that depend on shell-quote may also be vulnerable. A malicious user could perform code injection.

The Crestron Console service running on DGE-100, DM-DGE-200-C, and TS-1542-C devices with default configuration and running firmware versions 1.3384.00049.001 and lower are vulnerable to command injection that can be used to gain root-level access.

Seagate Media Server in Seagate Personal Cloud has unauthenticated command injection in the uploadTelemetry and getLogs functions in views.py because .psp URLs are handled by the fastcgi.server component and shell metacharacters are mishandled.

The STARTTLS implementation in MailMarshal before 7.2 allows plaintext command injection.

The most package in Debian wheezy before 5.0.0a-2.2, in Debian jessie before 5.0.0a-2.3+deb8u1, and in Debian unstable before 5.0.0a-3 allows remote attackers to execute arbitrary commands via shell metacharacters in the name of an LZMA-compressed file.

A server auth command injection authentication bypass vulnerability in Trend Micro Smart Protection Server (Standalone) versions 3.3 and below could allow remote attackers to escalate privileges on vulnerable installations.

Cisco Unified Computing System (UCS) Central Software 1.3(1b) and earlier allows remote attackers to execute arbitrary OS commands via a crafted HTTP request, aka Bug ID CSCuv33856.

A Command Injection vulnerability exists in the getTopologyHistory service of the Apache Storm 2.x prior to 2.2.1 and Apache Storm 1.x prior to 1.2.4. A specially crafted thrift request to the Nimbus server allows Remote Code Execution (RCE) prior to authentication.

An issue was discovered in Leptonica through 1.75.3. The gplotMakeOutput function allows command injection via a $(command) approach in the gplot rootname argument. This issue exists because of an incomplete fix for CVE-2018-3836.

statuswml.cgi in Nagios before 3.1.1 allows remote attackers to execute arbitrary commands via shell metacharacters in the (1) ping or (2) Traceroute parameters.

compass-compile through 0.0.1 is vulnerable to Command Injection.It allows execution of arbitrary commands via tha options argument.

pixl-class prior to 1.0.3 allows execution of arbitrary commands. The members argument of the create function can be controlled by users without any sanitization.

Adobe Dreamweaver CC versions 18.0 and earlier have an OS Command Injection vulnerability. Successful exploitation could lead to arbitrary code execution in the context of the current user.

A command injection vulnerability has been reported to affect QNAP device, VioStor. If exploited, this vulnerability allows remote attackers to run arbitrary commands. We have already fixed this vulnerability in the following versions of QVR: QVR FW 5.1.6 build 20211109 and later

IBM Rational Collaborative Lifecycle Management 3.0.1.6 before iFix8, 4.0 before 4.0.7 iFix11, 5.0 before 5.0.2 iFix18, and 6.0 before 6.0.2 iFix5; Rational Quality Manager 3.0.1.6 before iFix8, 4.0 before 4.0.7 iFix11, 5.0 before 5.0.2 iFix18, and 6.0 before 6.0.2 iFix5; Rational Team Concert 3.0.1.6 before iFix8, 4.0 before 4.0.7 iFix11, 5.0 before 5.0.2 iFix18, and 6.0 before 6.0.2 iFix5; Rational DOORS Next Generation 4.0 before 4.0.7 iFix11, 5.0 before 5.0.2 iFix18, and 6.0 before 6.0.2 iFix5; Rational Engineering Lifecycle Manager 4.x before 4.0.7 iFix11, 5.0 before 5.0.2 iFix18, and 6.0 before 6.0.2 iFix5; Rational Rhapsody Design Manager 4.0 before 4.0.7 iFix11, 5.0 before 5.0.2 iFix18, and 6.0 before 6.0.2 iFix5; and Rational Software Architect Design Manager 4.0 before 4.0.7 iFix11, 5.0 before 5.0.2 iFix18, and 6.0 before 6.0.2 iFix5 allow remote authenticated users to execute arbitrary OS commands via a crafted request.

A vulnerability in the parisneo/lollms-webui version 9.3 allows attackers to bypass intended access restrictions and execute arbitrary code. The issue arises from the application's handling of the `/execute_code` endpoint, which is intended to be blocked from external access by default. However, attackers can exploit the `/update_setting` endpoint, which lacks proper access control, to modify the `host` configuration at runtime. By changing the `host` setting to an attacker-controlled value, the restriction on the `/execute_code` endpoint can be bypassed, leading to remote code execution. This vulnerability is due to improper neutralization of special elements used in an OS command (`Improper Neutralization of Special Elements used in an OS Command`).

A vulnerability has been found in D-Link DIR-816 1.10CNB05 and classified as critical. Affected by this vulnerability is the function qosClassifier of the file /goform/qosClassifier. The manipulation of the argument dip_address/sip_address leads to os command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability, which was classified as critical, has been found in Zend.To up to 6.10-6 Beta. This issue affects the function exec of the file NSSDropoff.php. The manipulation of the argument file_1 leads to os command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. Upgrading to version 6.10-7 is able to address this issue. It is recommended to upgrade the affected component. This affects a rather old version of the software. The vendor recommends updating to the latest release. Additional countermeasures have been added in 6.15-8.

A vulnerability, which was classified as critical, was found in D-Link DIR-816 1.10CNB05. Affected is the function setipsec_config of the file /goform/setipsec_config. The manipulation of the argument localIP/remoteIP leads to os command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

An issue was discovered on Teracue ENC-400 devices with firmware 2.56 and below. The login form passes user input directly to a shell command without any kind of escaping or validation in /usr/share/www/check.lp file. An attacker is able to perform command injection using the "password" parameter in the login form.

A command injection vulnerability exists in the `TranscriptEndpoint` of mudler/localai, specifically within the `audioToWav` function used for converting audio files to WAV format for transcription. The vulnerability arises due to the lack of sanitization of user-supplied filenames before passing them to ffmpeg via a shell command, allowing an attacker to execute arbitrary commands on the host system. Successful exploitation could lead to unauthorized access, data breaches, or other detrimental impacts, depending on the privileges of the process executing the code.

An OS Command Injection vulnerability exists in the '/open_code_folder' endpoint of the parisneo/lollms-webui application, due to improper validation of user-supplied input in the 'discussion_id' parameter. Attackers can exploit this vulnerability by injecting malicious OS commands, leading to unauthorized command execution on the underlying operating system. This could result in unauthorized access, data leakage, or complete system compromise.

Shopware is an open source eCommerce platform. Versions prior to 6.4.3.1 contain a command injection vulnerability in mail agent settings. Version 6.4.3.1 contains a patch. As workarounds for older versions of 6.1, 6.2, and 6.3, corresponding security measures are also available via a plugin.

A vulnerability was found in openBI up to 1.0.8 and classified as critical. This issue affects the function dlfile of the file /application/websocket/controller/Setting.php. The manipulation of the argument phpPath leads to os command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The identifier VDB-252473 was assigned to this vulnerability.

A vulnerability, which was classified as critical, was found in DrayTek Vigor2960 and Vigor300B 1.5.1.4. Affected is an unknown function of the file /cgi-bin/mainfunction.cgi/apmcfgupload of the component Web Management Interface. The manipulation of the argument session leads to os command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. Upgrading to version 1.5.1.5 is able to address this issue. It is recommended to upgrade the affected component.

A vulnerability, which was classified as critical, has been found in DrayTek Vigor2960 and Vigor300B 1.5.1.3/1.5.1.4. This issue affects some unknown processing of the file /cgi-bin/mainfunction.cgi/apmcfgupptim of the component Web Management Interface. The manipulation of the argument session leads to os command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. Upgrading to version 1.5.1.5 is able to address this issue. It is recommended to upgrade the affected component.

# Vulnerability in `rand-quote` and `hitokoto` plugins **Description**: the `rand-quote` and `hitokoto` fetch quotes from quotationspage.com and hitokoto.cn respectively, do some process on them and then use `print -P` to print them. If these quotes contained the proper symbols, they could trigger command injection. Given that they're an external API, it's not possible to know if the quotes are safe to use. **Fixed in**: [72928432](https://github.com/ohmyzsh/ohmyzsh/commit/72928432). **Impacted areas**: - `rand-quote` plugin (`quote` function). - `hitokoto` plugin (`hitokoto` function).

viewrq.php in nweb2fax 0.2.7 and earlier allows remote attackers to execute arbitrary code via shell metacharacters in the var_filename parameter in a (1) tif or (2) pdf format action.

In ProLink PRC2402M V1.0.18 and older, the set_sys_cmd function in the adm.cgi binary, accessible with a page parameter value of sysCMD contains a trivial command injection where the value of the command parameter is passed directly to system.

In ProLink PRC2402M V1.0.18 and older, the set_TR069 function in the adm.cgi binary, accessible with a page parameter value of TR069 contains a trivial command injection where the value of the TR069_local_port parameter is passed directly to system.

Nagios XI WatchGuard Wizard before version 1.4.8 is vulnerable to remote code execution through Improper neutralisation of special elements used in an OS Command (OS Command injection).

LibreNMS 1.46 allows remote attackers to execute arbitrary OS commands by using the $_POST['community'] parameter to html/pages/addhost.inc.php during creation of a new device, and then making a /ajax_output.php?id=capture&format=text&type=snmpwalk&hostname=localhost request that triggers html/includes/output/capture.inc.php command mishandling.

Symantec Endpoint Protection Manager (SEPM) 12.1 before 12.1-RU6-MP3 allows remote attackers to execute arbitrary OS commands via crafted data.

A vulnerability was found in Fujian Kelixun 1.0. It has been classified as critical. This affects an unknown part of the file /app/fax/fax_view.php of the component Filename Handler. The manipulation of the argument fax_file leads to os command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was found in Totolink N200RE 9.3.5u.6139_B20201216 and classified as critical. This issue affects the function UploadFirmwareFile of the file /cgi-bin/cstecgi.cgi. The manipulation of the argument FileName leads to os command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-249863. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

HooToo TripMate Titan HT-TM05 and HT-05 routers with firmware 2.000.022 and 2.000.082 allow remote command execution via shell metacharacters in the mac parameter of a protocol.csp?function=set&fname=security&opt=mac_table request.

An OS command injection issue exists in Nimesa Backup and Recovery v2.3 and v2.4. If this vulnerability is exploited, an arbitrary OS commands may be executed on the server where the product is running.

A vulnerability has been found in Totolink N200RE 9.3.5u.6139_B20201216 and classified as critical. This vulnerability affects the function NTPSyncWithHost of the file /cgi-bin/cstecgi.cgi. The manipulation of the argument host_time leads to os command injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. VDB-249862 is the identifier assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was found in Totolink N200RE 9.3.5u.6139_B20201216. It has been classified as critical. Affected is the function setDiagnosisCfg of the file /cgi-bin/cstecgi.cgi. The manipulation of the argument ip leads to os command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-249864. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability, which was classified as critical, has been found in Totolink LR1200GB 9.1.0u.6619_B20230130. Affected by this issue is the function setUssd of the file /cgi-bin/cstecgi.cgi. The manipulation of the argument ussd leads to os command injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-249860. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.