D-Link DCH-M225 1.05b01 and earlier devices allow remote authenticated admins to execute arbitrary OS commands via shell metacharacters in the media renderer name.

D-link DIR-816 A2_v1.10CNB04.img is vulnerable to Command injection via /goform/form2userconfig.cgi.

The D-Link DSL6740C modem has an OS Command Injection vulnerability, allowing remote attackers with administrator privileges to inject and execute arbitrary system commands through a specific functionality provided by SSH and Telnet.

The D-Link DSL6740C modem has an OS Command Injection vulnerability, allowing remote attackers with administrator privileges to inject and execute arbitrary system commands through a specific functionality provided by SSH and Telnet.

An OS command injection vulnerability was discovered in D-Link DSL-3782 v1.01 via the inIP, insPort, inePort, exsPort, exePort, and protocol parameters. This vulnerability allows attackers to execute arbitrary operating system (OS) commands via a crafted packet.

D-Link G416 nodered chmod Command Injection Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link G416 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the HTTP service listening on TCP port 80. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-21296.

D-Link G416 flupl pythonapp Command Injection Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link G416 wireless routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the HTTP service listening on TCP port 80. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-21297.

D-Link G416 nodered tar File Handling Command Injection Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link G416 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the HTTP service listening on TCP port 80. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-21808.

D-Link G416 cfgsave Command Injection Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link G416 wireless routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the HTTP service listening on TCP port 80. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-21286.

The D-Link DSL6740C modem has an OS Command Injection vulnerability, allowing remote attackers with administrator privileges to inject and execute arbitrary system commands through a specific functionality provided by SSH and Telnet.

D-Link G416 awsfile rm Command Injection Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link G416 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the HTTP service listening on TCP port 80. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-21811.

D-Link DAP-2622 Telnet CLI Command Injection Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DAP-2622. Authentication is required to exploit this vulnerability. The specific flaw exists within the CLI service, which listens on TCP port 23. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. . Was ZDI-CAN-20051.

An OS command injection vulnerability was discovered in D-Link DSL-3782 v1.01 via the public_type parameter. This vulnerability allows attackers to execute arbitrary operating system (OS) commands via a crafted packet.

A lack of input validation and access controls in Lua CGIs on D-Link DSR VPN routers may result in arbitrary input being passed to system command APIs, resulting in arbitrary command execution with root privileges. This affects DSR-150, DSR-250, DSR-500, and DSR-1000AC with firmware 3.14 and 3.17.

D-Link DAP-1325 HNAP SetAPLanSettings IPAddr Command Injection Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DAP-1325 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the handling of a request parameter provided to the HNAP1 SOAP endpoint. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-18810.

D-Link DAP-1325 HNAP SetHostIPv6StaticSettings StaticPrefixLength Command Injection Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DAP-1325 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the handling of a request parameter provided to the HNAP1 SOAP endpoint. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-18820.

D-Link DAP-1325 HNAP SetHostIPv6StaticSettings StaticAddress Command Injection Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DAP-1325 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the handling of a request parameter provided to the HNAP1 SOAP endpoint. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-18816.

D-Link DIR-2640 LocalIPAddress Command Injection Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DIR-2640 routers. Although authentication is required to exploit this vulnerability, the existing authentication mechanism can be bypassed. The specific flaw exists within the handling of the LocalIPAddress parameter provided to the HNAP1 endpoint. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. . Was ZDI-CAN-19544.

D-Link DAP-1325 HNAP SetHostIPv6StaticSettings StaticDNS1 Command Injection Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DAP-1325 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the handling of a request parameter provided to the HNAP1 SOAP endpoint. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-18818.

An issue was discovered on D-Link DWR-116 through 1.06, DWR-512 through 2.02, DWR-712 through 2.02, DWR-912 through 2.02, DWR-921 through 2.02, and DWR-111 through 1.01 devices. An authenticated attacker may execute arbitrary code by injecting the shell command into the chkisg.htm page Sip parameter. This allows for full control over the device internals.

D-Link DIR-865L Ax 1.20B01 Beta devices allow Command Injection.

setSystemCommand on D-Link DCS-930L devices before 2.12 allows a remote attacker to execute code via an OS command in the SystemCommand parameter.

In the /HNAP1/SetQoSSettings message, the uplink parameter is vulnerable, and the vulnerability affects D-Link DIR-822 Rev.B 202KRb06 and DIR-822 Rev.C 3.10B06 devices. In the SetQoSSettings.php source code, the uplink parameter is saved in the /bwc/entry:1/bandwidth and /bwc/entry:2/bandwidth internal configuration memory without any regex checking. And in the bwc_tc_spq_start, bwc_tc_wfq_start, and bwc_tc_adb_start functions of the bwcsvcs.php source code, the data in /bwc/entry:1/bandwidth and /bwc/entry:2/bandwidth is used with the tc command without any regex checking. A vulnerable /HNAP1/SetQoSSettings XML message could have shell metacharacters in the uplink element such as the `telnetd` string.

An issue was discovered on D-Link DIR-816 A2 1.10 B05 devices. An HTTP request parameter is used in command string construction in the handler function of the /goform/form2systime.cgi route. This could lead to command injection via shell metacharacters in the datetime parameter.

A vulnerability, which was classified as critical, has been found in D-Link DIR-823X 240126/240802. This issue affects the function sub_41710C of the file /goform/diag_nslookup of the component HTTP POST Request Handler. The manipulation of the argument target_addr leads to os command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used.

The runShellCmd function in systemCheck.htm in D-Link DSR-150 with firmware before 1.08B44; DSR-150N with firmware before 1.05B64; DSR-250 and DSR-250N with firmware before 1.08B44; and DSR-500, DSR-500N, DSR-1000, and DSR-1000N with firmware before 1.08B77 allows remote attackers to execute arbitrary commands via shell metacharacters in the (1) "Ping or Trace an IP Address" or (2) "Perform a DNS Lookup" section.

An OS command injection vulnerability exists in multiple D-Link routers—confirmed on DIR-300 rev A (v1.05) and DIR-615 rev D (v4.13)—via the authenticated tools_vct.xgi CGI endpoint. The web interface fails to properly sanitize user-supplied input in the pingIp parameter, allowing attackers with valid credentials to inject arbitrary shell commands. Exploitation enables full device compromise, including spawning a telnet daemon and establishing a root shell. The vulnerability is present in firmware versions that expose tools_vct.xgi and use the Mathopd/1.5p6 web server. No vendor patch is available, and affected models are end-of-life.

An authenticated OS command injection vulnerability exists in various D-Link routers (tested on DIR-615H1 running firmware version 8.04) via the tools_vct.htm endpoint. The web interface fails to sanitize input passed from the ping_ipaddr parameter to the tools_vct.htm diagnostic interface, allowing attackers to inject arbitrary shell commands using backtick encapsulation. With default credentials, an attacker can exploit this blind injection vector to execute arbitrary commands.

A vulnerability has been found in D-Link DI-8100, DI-8100G, DI-8200, DI-8200G, DI-8003 and DI-8003G 16.07.26A1/17.12.20A1/19.12.10A1. Affected by this vulnerability is the function sub_4621DC of the file usb_paswd.asp of the component jhttpd. The manipulation of the argument hname leads to os command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used.

D-Link G416 flupl self Command Injection Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link G416 wireless routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the HTTP service listening on TCP port 80. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-21294.

D-Link D-View executeWmicCmd Command Injection Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of D-Link D-View. Although authentication is required to exploit this vulnerability, the existing authentication mechanism can be bypassed. The specific flaw exists within the executeWmicCmd method. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-21821.

D-Link DIR_823G 1.0.2B05 was discovered to contain a command injection vulnerability via the HostName parameter in the SetWanSettings function. This vulnerability allows attackers to execute arbitrary OS commands via a crafted request.

D-Link DIR_882_FW130B06 and DIR_878 DIR_878_FW130B08 were discovered to contain a command injection vulnerability via the MacAddress parameter in the SetMACFilters2 function. This vulnerability allows attackers to execute arbitrary OS commands via a crafted POST request.

D-Link DIR_882_FW130B06 and DIR_878 DIR_878_FW130B08 were discovered to contain multiple command injection vulnerabilities via the LocalIPAddress, TCPPorts, and UDPPorts parameters in the SetPortForwardingSettings function. This vulnerability allows attackers to execute arbitrary OS commands via a crafted POST request.

D-Link DIR_882_FW130B06 and DIR_878 DIR_878_FW130B08 were discovered to contain a command injection vulnerability via the VLANID:2/VID parameter in the SetVLANSettings function. This vulnerability allows attackers to execute arbitrary OS commands via a crafted POST request.

D-Link DIR_882_FW130B06 and DIR_878 DIR_878_FW130B08 were discovered to contain a command injection vulnerability via the SSID parameter in the SetWLanRadioSettings function. This vulnerability allows attackers to execute arbitrary OS commands via a crafted POST request.

D-Link DIR_882_FW130B06 and DIR_878 DIR_878_FW130B08 were discovered to contain multiple command injection vulnerabilities via the ExternalPort, InternalPort, ProtocolNumber, and LocalIPAddress parameters in the SetVirtualServerSettings function. This vulnerability allows attackers to execute arbitrary OS commands via a crafted POST request.

D-Link DIR_882_FW130B06 and DIR_878 DIR_878_FW130B08 were discovered to contain a command injection vulnerability via the SubnetMask parameter in the SetGuestZoneRouterSettings function. This vulnerability allows attackers to execute arbitrary OS commands via a crafted POST request.

D-Link DIR_882_FW130B06 and DIR_878 DIR_878_FW130B08 were discovered to contain a command injection vulnerability via the VLANID:0/VID parameter in the SetVLANSettings function. This vulnerability allows attackers to execute arbitrary OS commands via a crafted POST request.

D-Link DIR_882_FW130B06 and DIR_878 DIR_878_FW130B08 were discovered to contain a command injection vulnerability via the key parameter in the SetWLanRadioSecurity function. This vulnerability allows attackers to execute arbitrary OS commands via a crafted POST request.

D-Link DIR-846W A1 FW100A43 was discovered to contain a remote command execution (RCE) vulnerability via keys smartqos_express_devices and smartqos_normal_devices in SetSmartQoSSettings.

D-Link DI-7003GV2 v24.04.18D1, DI-7100G+V2 v24.04.18D1, DI-7100GV2 v24.04.18D1, DI-7200GV2 v24.04.18E1, DI-7300G+V2 v24.04.18D1, and DI-7400G+V2 v24.04.18D1 are vulnerable to Remote Command Execution. An attacker can achieve arbitrary command execution by sending a carefully crafted malicious string to the CGI function responsible for handling usb_paswd.asp.

An issue was discovered on D-Link DIR-816 A2 1.10 B05 devices. An HTTP request parameter is used in command string construction within the handler function of the /goform/NTPSyncWithHost route. This could lead to command injection via shell metacharacters.

An issue was discovered on D-Link DIR-878 devices with firmware 1.12A1. This issue is a Command Injection allowing a remote attacker to execute arbitrary code, and get a root shell. A command Injection vulnerability allows attackers to execute arbitrary OS commands via a crafted /HNAP1 POST request. This occurs when any HNAP API function triggers a call to the system function with untrusted input from the request body for the SetStaticRouteIPv6Settings API function, as demonstrated by shell metacharacters in the DestNetwork field.

D-Link DAP-1360U before 3.0.1 devices allow remote authenticated users to execute arbitrary commands via shell metacharacters in the IP JSON value for ping (aka res_config_action=3&res_config_id=18).

An issue was discovered on D-Link DIR-878 devices with firmware 1.12A1. This issue is a Command Injection allowing a remote attacker to execute arbitrary code, and get a root shell. A command Injection vulnerability allows attackers to execute arbitrary OS commands via a crafted /HNAP1 POST request. This occurs when any HNAP API function triggers a call to the system function with untrusted input from the request body for the SetQoSSettings API function, as demonstrated by shell metacharacters in the IPAddress field.

This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DAP-1860 1.04B03_HOTFIX WiFi extenders. Although authentication is required to exploit this vulnerability, the existing authentication mechanism can be bypassed. The specific flaw exists within the HNAP service, which listens on TCP port 80 by default. When parsing the SOAPAction header, the process does not properly validate a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of the device. Was ZDI-CAN-10084.

D-Link DSL-7740C does not properly validate user input, which allows an authenticated LAN user to inject arbitrary command.

An issue was discovered on D-Link DIR-825 Rev.B 2.10 devices. They allow remote attackers to execute arbitrary commands via the wps_sta_enrollee_pin parameter in a set_sta_enrollee_pin.cgi POST request. TRENDnet TEW-632BRP 1.010B32 is also affected.

D-Link DAP-1325 HNAP SetAPLanSettings Mode Command Injection Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DAP-1325 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the handling of a request parameter provided to the HNAP1 SOAP endpoint. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-18811.