The quaker function of a smart contract implementation for BOMBBA (BOMB), an tradable Ethereum ERC20 token, allows attackers to change the owner of the contract, because the function does not check the caller's identity.

The ToOwner() function of a smart contract implementation for Cryptbond Network (CBN), an tradable Ethereum ERC20 token, allows attackers to change the owner of the contract, because the function does not check the caller's identity.

The NETM() function of a smart contract implementation for NewIntelTechMedia (NETM), an tradable Ethereum ERC20 token, allows attackers to change the owner of the contract, because the function does not check the caller's identity.

The internal message protocol for Walrus in Eucalyptus 3.2.0 and earlier does not require signatures for unspecified request headers, which allows attackers to (1) delete or (2) upload snapshots.

The owned function of a smart contract implementation for DDQ, an tradable Ethereum ERC20 token, allows attackers to change the owner of the contract, because the function does not check the caller's identity.

cgi-bin/admin.cgi in the web console in Plixer Scrutinizer (aka Dell SonicWALL Scrutinizer) before 9.5.0 does not require token authentication, which allows remote attackers to add administrative accounts via a userprefs action.

An issue was discovered on D-Link DIR-850L 1.21WW devices. A partially completed WPA handshake is sufficient for obtaining full access to the wireless network. A client can access the network by sending packets on Data Frames to the AP without encryption.

A vulnerability classified as critical has been found in Multilaser Sirius RE016 MLT1.0. Affected is an unknown function of the file /cgi-bin/cstecgi.cgi of the component Password Change Handler. The manipulation leads to improper authentication. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

In Versa Director, the un-authentication request found.

tinc before 1.0.30 has a broken authentication protocol, without even a partial mitigation.

The telnetd service in FreeBSD 9.3, 10.1, 10.2, 10.3, and 11.0 allows remote attackers to inject arguments to login and bypass authentication via vectors involving a "sequence of memory allocation failures."

Ruckus Wireless H500 web management interface authentication bypass

CreateWiki is Miraheze's MediaWiki extension for requesting & creating wikis. Without the patch for this issue, anonymous comments can be made using Special:RequestWikiQueue when sent directly via POST. A patch for this issue is available in the `master` branch of CreateWiki's GitHub repository.

Shopware is an open commerce platform based on the Symfony php Framework and the Vue javascript framework. In versions prior to 6.4.8.2 it is possible to modify customers and to create orders without App Permission. This issue is a result of improper api route checking. Users are advised to upgrade to version 6.4.8.2. There are no known workarounds.

Crestron AM-100 with firmware 1.6.0.2 and AM-101 with firmware 2.7.0.2 anyone can change the administrator and moderator passwords via the iso.3.6.1.4.1.3212.100.3.2.8.1 and iso.3.6.1.4.1.3212.100.3.2.8.2 OIDs. A remote, unauthenticated attacker can use this vulnerability to change the admin or moderator user's password and gain access to restricted areas on the HTTP interface.

After the initial setup process, some steps of setup.php file are reachable not only by super-administrators, but by unauthenticated users as well. Malicious actor can pass step checks and potentially change the configuration of Zabbix Frontend.

A vulnerability in Metasys ADS/ADX/OAS 10 versions prior to 10.1.5 and Metasys ADS/ADX/OAS 11 versions prior to 11.0.2 allows unverified password change.

OnionShare is an open source tool that lets you securely and anonymously share files, host websites, and chat with friends using the Tor network. In affected versions authenticated users (or unauthenticated in public mode) can send messages without being visible in the list of chat participants. This issue has been resolved in version 2.5.

The Very Simple Contact Form WordPress plugin before 11.6 exposes the solution to the captcha in the rendered contact form, both as hidden input fields and as plain text in the page, making it very easy for bots to bypass the captcha check, rendering the page a likely target for spam bots.

A vulnerability, which was classified as critical, has been found in 20120630 Novel-Plus up to 0e156c04b4b7ce0563bef6c97af4476fcda8f160. This issue affects the function addCrawlSource of the file novel-crawl/src/main/java/com/java2nb/novel/controller/CrawlController.java. The manipulation leads to missing authentication. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

glFusion CMS v1.7.9 is affected by an arbitrary user registration vulnerability in /public_html/users.php. An attacker can register with the mailbox of any user. When users want to register, they will find that the mailbox has been occupied.

An Incorrect Access Control vulnerability exists in zzcms 8.2, which lets a malicious user bypass authentication by changing the user name in the cookie to use any password.

class-woo-banner-management.php in the MULTIDOTS WooCommerce Category Banner Management plugin 1.1.0 for WordPress has an Unauthenticated Settings Change Vulnerability, related to certain wp_ajax_nopriv_ usage. Anyone can change the plugin's setting by simply sending a request with a wbm_save_shop_page_banner_data action.

A misconfiguration of RSA in PingID Mac Login prior to 1.1 is vulnerable to pre-computed dictionary attacks, leading to an offline MFA bypass.

Affected versions of Atlassian Jira Server and Data Center allow attackers with access to an administrator account that has had its access revoked to modify projects' Users & Roles settings, via a Broken Authentication vulnerability in the /plugins/servlet/project-config/PROJECT/roles endpoint. The affected versions are before version 8.19.1.

Magento Community Edition (CE) 1.9.1.0 and Enterprise Edition (EE) 1.14.1.0 allow remote attackers to bypass authentication via the forwarded parameter.

An issue was discovered in Midnight Commander through 4.8.26. When establishing an SFTP connection, the fingerprint of the server is neither checked nor displayed. As a result, a user connects to the server without the ability to verify its authenticity.

Dell PowerScale OneFS, versions 8.2.2-9.3.0.x, contain an authentication bypass by primary weakness in one of the authentication factors. A remote unauthenticated attacker may potentially exploit this vulnerability and bypass one of the factors of authentication.

FreeSWITCH is a Software Defined Telecom Stack enabling the digital transformation from proprietary telecom switches to a software implementation that runs on any commodity hardware. Prior to version 1.10.7, FreeSWITCH does not authenticate SIP MESSAGE requests, leading to spam and message spoofing. By default, SIP requests of the type MESSAGE (RFC 3428) are not authenticated in the affected versions of FreeSWITCH. MESSAGE requests are relayed to SIP user agents registered with the FreeSWITCH server without requiring any authentication. Although this behaviour can be changed by setting the `auth-messages` parameter to `true`, it is not the default setting. Abuse of this security issue allows attackers to send SIP MESSAGE messages to any SIP user agent that is registered with the server without requiring authentication. Additionally, since no authentication is required, chat messages can be spoofed to appear to come from trusted entities. Therefore, abuse can lead to spam and enable social engineering, phishing and similar attacks. This issue is patched in version 1.10.7. Maintainers recommend that this SIP message type is authenticated by default so that FreeSWITCH administrators do not need to be explicitly set the `auth-messages` parameter. When following such a recommendation, a new parameter can be introduced to explicitly disable authentication.

A vulnerability has been identified in SIMATIC S7-1200 CPU family (incl. SIPLUS variants) (V4.5.0). Affected devices fail to authenticate against configured passwords when provisioned using TIA Portal V13. This could allow an attacker using TIA Portal V13 or later versions to bypass authentication and download arbitrary programs to the PLC. The vulnerability does not occur when TIA Portal V13 SP1 or any later version was used to provision the device.

A flaw was found in keycloak as shipped in Red Hat Single Sign-On 7.4 where IDN homograph attacks are possible. A malicious user can register himself with a name already registered and trick admin to grant him extra privileges.

Wizkunde SAMLBase may incorrectly utilize the results of XML DOM traversal and canonicalization APIs in such a way that an attacker may be able to manipulate the SAML data without invalidating the cryptographic signature, allowing the attack to potentially bypass authentication to SAML service providers.

HashiCorp Vault Enterprise 1.6.0 & 1.6.1 allowed the `remove-peer` raft operator command to be executed against DR secondaries without authentication. Fixed in 1.6.2.

In JetBrains TeamCity before 2021.1.1, insufficient authentication checks for agent requests were made.

The OpenID module in Drupal 6.x before 6.18, and the OpenID module 5.x before 5.x-1.4 for Drupal, violates the OpenID 2.0 protocol by not ensuring that fields are signed, which allows remote attackers to bypass authentication by leveraging an assertion from an OpenID provider.

The SimpleCaptcha implementation in Liferay Portal 7.3.4, 7.3.5 and Liferay DXP 7.3 before fix pack 1 does not invalidate CAPTCHA answers after it is used, which allows remote attackers to repeatedly perform actions protected by a CAPTCHA challenge by reusing the same CAPTCHA answer.

The optional ActiveMQ LDAP login module can be configured to use anonymous access to the LDAP server. In this case, for Apache ActiveMQ Artemis prior to version 2.16.0 and Apache ActiveMQ prior to versions 5.16.1 and 5.15.14, the anonymous context is used to verify a valid users password in error, resulting in no check on the password.

A vulnerability in the session identification management functionality of the web-based interface of Cisco Wireless LAN Controller (WLC) Software could allow an unauthenticated, remote attacker to hijack a valid user session on an affected system. The vulnerability exists because the affected software does not properly clear previously assigned session identifiers for a user session when a user authenticates to the web-based interface. An attacker could exploit this vulnerability by using an existing session identifier to connect to the software through the web-based interface. Successful exploitation could allow the attacker to hijack an authenticated user's browser session on the system. Versions 8.1 and 8.5 are affected.

The Plus Addons for Elementor Page Builder WordPress plugin before 4.1.11 did not properly check that a user requesting a password reset was the legitimate user, allowing an attacker to send an arbitrary reset password email to a registered user on behalf of the WordPress site. Such issue could be chained with an open redirect (CVE-2021-24358) in version below 4.1.10, to include a crafted password reset link in the email, which would lead to an account takeover.

telepark.wiki 2.4.23 and earlier allows remote attackers to bypass authorization and (1) delete arbitrary pages via a modified pageID parameter to ajax/deletePage.php or (2) delete arbitrary comments via a modified pageID parameter to ajax/deleteComment.php.

Improper access control in Citrix ADC and Citrix Gateway versions before 13.0-58.30, 12.1-57.18, 12.0-63.21, 11.1-64.14 and 10.5-70.18 and Citrix SDWAN WAN-OP versions before 11.1.1a, 11.0.3d and 10.2.7 allows unauthenticated access to certain URL endpoints.

Authentication Bypass resulting in exposure of SD-WAN functionality in Citrix SD-WAN Center versions before 11.2.2, 11.1.2b and 10.2.8

A security issue was found in UniFi Protect controller v1.14.10 and earlier.The authentication in the UniFi Protect controller API was using “x-token” improperly, allowing attackers to use the API to send authenticated messages without a valid token.This vulnerability was fixed in UniFi Protect v1.14.11 and newer.This issue does not impact UniFi Cloud Key Gen 2 plus.This issue does not impact UDM-Pro customers with UniFi Protect stopped.Affected Products:UDM-Pro firmware 1.7.2 and earlier.UNVR firmware 1.3.12 and earlier.Mitigation:Update UniFi Protect to v1.14.11 or newer version; the UniFi Protect controller can be updated through your UniFi OS settings.Alternatively, you can update UNVR and UDM-Pro to:- UNVR firmware to 1.3.15 or newer.- UDM-Pro firmware to 1.8.0 or newer.

This affects all versions of package react-adal. It is possible for a specially crafted JWT token and request URL can cause the nonce, session and refresh values to be incorrectly validated, causing the application to treat an attacker-generated JWT token as authentic. The logical defect is caused by how the nonce, session and refresh values are stored in the browser local storage or session storage. Each key is automatically appended by ||. When the received nonce and session keys are generated, the list of values is stored in the browser storage, separated by ||, with || always appended to the end of the list. Since || will always be the last 2 characters of the stored values, an empty string ("") will always be in the list of the valid values. Therefore, if an empty session parameter is provided in the callback URL, and a specially-crafted JWT token contains an nonce value of "" (empty string), then adal.js will consider the JWT token as authentic.

UniFi Cloud Key firmware < 1.1.6 contains a vulnerability that enables an attacker being able to change a device hostname by sending a malicious API request. This affects Cloud Key gen2 and Cloud Key gen2 Plus.

MFScripts YetiShare v3.5.2 through v4.5.4 might allow an attacker to reset a password by using a leaked hash (the hash never expires until used).

On the TP-Link TL-SG108E 1.0, the upgrade process can be requested remotely without authentication (httpupg.cgi with a parameter called cmd). This affects the 1.1.2 Build 20141017 Rel.50749 firmware.

Apache Solr uses a PKI based mechanism to secure inter-node communication when security is enabled. It is possible to create a specially crafted node name that does not exist as part of the cluster and point it to a malicious node. This can trick the nodes in cluster to believe that the malicious node is a member of the cluster. So, if Solr users have enabled BasicAuth authentication mechanism using the BasicAuthPlugin or if the user has implemented a custom Authentication plugin, which does not implement either "HttpClientInterceptorPlugin" or "HttpClientBuilderPlugin", his/her servers are vulnerable to this attack. Users who only use SSL without basic authentication or those who use Kerberos are not affected.

QNAP NAS application Proxy Server through version 1.2.0 does not authenticate requests properly. Successful exploitation can lead to change of the settings of Proxy Server.

A vulnerability in Cisco IOS 15.5(3)M Software for Cisco CallManager Express (CME) could allow an unauthenticated, remote attacker to make unauthorized phone calls. The vulnerability is due to a configuration restriction in the toll-fraud protections component of the affected software. An attacker could exploit this vulnerability to place unauthorized, long-distance phone calls by using an affected system. Cisco Bug IDs: CSCuy40939.