Pydio 6.0.8 mishandles error reporting when a directory allows unauthenticated uploads, and the remote-upload option is used with the http://localhost:22 URL. The attacker can obtain sensitive information such as the name of the user who created that directory and other internal server information.

websitebaker prior to and including 2.8.1 has an authentication error in backup module.

Several web pages provided SAP NetWeaver Process Integration (versions: SAP_XIESR: 7.10 to 7.11, 7.20, 7.30, 7.31, 7.40, 7.50 and SAP_XITOOL: 7.10 to 7.11, 7.30, 7.31, 7.40, 7.50) are not password protected. An attacker could access landscape information like host names, ports or other technical data in the absence of restrictive firewall and port settings.

A missing authentication for appliance registration vulnerability in Trend Micro Email Encryption Gateway 5.5 could allow an attacker to manipulate the registration process of the product to reset configuration parameters.

On 2.1.15 version and below of Lider module in LiderAhenk software is leaking it's configurations via an unsecured API. An attacker with an access to the configurations API could get valid LDAP credentials.

A vulnerability was found in Papendorf SOL Connect Center 3.3.0.0 and classified as problematic. Affected by this issue is some unknown functionality of the component Web Interface. The manipulation leads to missing authentication. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability classified as problematic was found in Lucky LM-520-SC, LM-520-FSC and LM-520-FSC-SAM up to 20250321. Affected by this vulnerability is an unknown functionality. The manipulation leads to missing authentication. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was found in eGauge EG3000 Energy Monitor 3.6.3. It has been classified as problematic. This affects an unknown part of the component Setting Handler. The manipulation leads to missing authentication. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was found in CodeAstro House Rental Management System 1.0. It has been rated as problematic. Affected by this issue is some unknown functionality of the file booking.php/owner.php/tenant.php. The manipulation leads to missing authentication. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-255392.

An issue was discovered on Teracue ENC-400 devices with firmware 2.56 and below. While the web interface requires authentication before it can be interacted with, a large portion of the HTTP endpoints are missing authentication. An attacker is able to view these pages before being authenticated, and some of these pages may disclose sensitive information.

An issue was discovered on Samsung mobile devices with O(8.x) software. Access to Gallery in the Secure Folder can occur without authentication. The Samsung ID is SVE-2018-13057 (December 2018).

If remote logging is not used, the worker (in the case of CeleryExecutor) or the scheduler (in the case of LocalExecutor) runs a Flask logging server and is listening on a specific port and also binds on 0.0.0.0 by default. This logging server had no authentication and allows reading log files of DAG jobs. This issue affects Apache Airflow < 2.1.2.

Several web interfaces in D-Link DIR-868LW 1.12b have no authentication requirements for access, allowing for attackers to obtain users' DNS query history.

A vulnerability in the Graphite web interface of the Policy and Charging Rules Function (PCRF) of Cisco Policy Suite (CPS) could allow an unauthenticated, remote attacker to access the Graphite web interface. The attacker would need to have access to the internal VLAN where CPS is deployed. The vulnerability is due to lack of authentication. An attacker could exploit this vulnerability by directly connecting to the Graphite web interface. An exploit could allow the attacker to access various statistics and Key Performance Indicators (KPIs) regarding the Cisco Policy Suite environment.

A vulnerability was found in 20120630 Novel-Plus up to 0e156c04b4b7ce0563bef6c97af4476fcda8f160. It has been rated as critical. Affected by this issue is the function list of the file novel-system/src/main/java/com/java2nb/system/controller/SessionController.java. The manipulation leads to missing authentication. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

IBM Security Guardium 10.5, 10.6, and 11.0 could allow an unauthorized user to obtain sensitive information due to missing security controls. IBM X-Force ID: 141226.

Kubernetes Dashboard before 1.10.1 allows attackers to bypass authentication and use Dashboard's Service Account for reading secrets within the cluster.

Sensitive information can be obtained through the handling of serialized data. The issue results from the lack of proper authentication required to query the server

IBM Security Identity Governance and Intelligence 5.2.3.2 and 5.2.4 could allow an attacker to obtain sensitive information due to missing authentication in IGI for the survey application. IBM X-Force ID: 148601.

HashiCorp Vault Enterprise 0.9.2 through 1.6.2 allowed the read of license metadata from DR secondaries without authentication. Fixed in 1.6.3.

An issue was discovered in Emote Remote Mouse through 4.0.0.0. Attackers can retrieve recently used and running applications, their icons, and their file paths. This information is sent in cleartext and is not protected by any authentication logic.

The lineage endpoint of the deprecated Experimental API was not protected by authentication in Airflow 2.0.0. This allowed unauthenticated users to hit that endpoint. This is low-severity issue as the attacker needs to be aware of certain parameters to pass to that endpoint and even after can just get some metadata about a DAG and a Task. This issue affects Apache Airflow 2.0.0.

Triangle MicroWorks SCADA Data Gateway get_config Missing Authentication Information Disclosure Vulnerability. This vulnerability allows remote attackers to disclose sensitive information on affected installations of Triangle MicroWorks SCADA Data Gateway. Authentication is not required to exploit this vulnerability. The specific flaw exists within the get_config endpoint. The issue results from the lack of authentication prior to allowing access to functionality. An attacker can leverage this vulnerability to disclose sensitive information. Was ZDI-CAN-20797.

PRTG Network Monitor before 20.1.57.1745 allows remote unauthenticated attackers to obtain information about probes running or the server itself (CPU usage, memory, Windows version, and internal statistics) via an HTTP request, as demonstrated by type=probes to login.htm or index.htm.

The LuxCal Web Calendar prior to 5.3.3M (MySQL version) and prior to 5.3.3L (SQLite version) contains a missing authentication vulnerability in dloader.php. If this vulnerability is exploited, arbitrary files on a server may be obtained.

An issue was discovered where a page is exposed that has the current administrator password in cleartext in the source code of the page. No authentication is required in order to reach the page (a certain live_?.shtml page with the variable syspasswd). Affected Devices: Wavlink WN530HG4, Wavlink WN531G3, and Wavlink WN572HG3

An issue was discovered in Wavlink WN530HG4, Wavlink WN531G3, Wavlink WN533A8, and Wavlink WN551K1 affecting /cgi-bin/ExportAllSettings.sh where a crafted POST request returns the current configuration of the device, including the administrator password. No authentication is required. The attacker must perform a decryption step, but all decryption information is readily available.

A vulnerability, which was classified as critical, has been found in IROAD Dash Cam X5 and Dash Cam X6 up to 20250308. Affected by this issue is some unknown functionality of the component API Endpoint. The manipulation leads to missing authentication. The attack may be launched remotely. The vendor was contacted early about this disclosure but did not respond in any way.

On all 7.x and 6.x versions (fixed in 8.0.0), BIG-IQ HA ElasticSearch service does not implement any form of authentication for the clustering transport services, and all data used by ElasticSearch for transport is unencrypted. Note: Software versions which have reached End of Software Development (EoSD) are not evaluated.

A vulnerability in the web interface of Cisco RV132W ADSL2+ Wireless-N VPN Routers and Cisco RV134W VDSL2 Wireless-AC VPN Routers could allow an unauthenticated, remote attacker to view configuration parameters for an affected device, which could lead to the disclosure of confidential information. The vulnerability is due to the absence of user authentication requirements for certain pages that are part of the web interface and contain confidential information for an affected device. An attacker could exploit this vulnerability by sending a crafted HTTP request to an affected device and examining the HTTP response to the request. A successful exploit could allow the attacker to view configuration parameters, including the administrator password, for the affected device. Cisco Bug IDs: CSCvg92739, CSCvh60172.

The vCenter Server contains an information disclosure vulnerability due to an unauthenticated appliance management API. A malicious actor with network access to port 443 on vCenter Server may exploit this issue to gain access to sensitive information.

There is a Missing Authentication for Critical Function vulnerability in Huawei Smartphone. Successful exploitation of this vulnerability may impair data confidentiality.

An issue was discovered in GitLab Community Edition (CE) and Enterprise Edition (EE) 12.6. It has Incorrect Access Control.

Trendnet AC2600 TEW-827DRU version 2.08B01 improperly discloses information via redirection from the setup wizard. Authentication can be bypassed and a user may view information as Admin by manually browsing to the setup wizard and forcing it to redirect to the desired page.

Racom's MIDGE Firmware 4.4.40.105 contains an issue that allows attackers to view sensitive syslog events without authentication.

There is a missing authentication vulnerability in some Huawei smartphone.Successful exploitation of this vulnerability may lead to low-sensitive information exposure.

The CACAGOO Cloud Storage Intelligent Camera TV-288ZD-2MP with firmware 3.4.2.0919 allows access to the RTSP service without a password.

Wipro Holmes Orchestrator 20.4.1 (20.4.1_02_11_2020) allows remote attackers to download arbitrary files, such as reports containing sensitive information, because authentication is not required for API access to processexecution/DownloadExcelFile/Domain_Credential_Report_Excel, processexecution/DownloadExcelFile/User_Report_Excel, processexecution/DownloadExcelFile/Process_Report_Excel, processexecution/DownloadExcelFile/Infrastructure_Report_Excel, or processexecution/DownloadExcelFile/Resolver_Report_Excel.

Zoho ManageEngine Desktop Central before 10.0.483 allows unauthenticated users to access PDFGenerationServlet, leading to sensitive information disclosure.

A vulnerability has been identified in SIMATIC MV540 H (All versions < V3.3), SIMATIC MV540 S (All versions < V3.3), SIMATIC MV550 H (All versions < V3.3), SIMATIC MV550 S (All versions < V3.3), SIMATIC MV560 U (All versions < V3.3), SIMATIC MV560 X (All versions < V3.3). Affected devices do not perform authentication for several web API endpoints. This could allow an unauthenticated remote attacker to read and download data from the device.

In Artica Pandora FMS through 7.42, an unauthenticated attacker can read the chat history. The file is in JSON format and it contains user names, user IDs, private messages, and timestamps.

An issue was discovered in Mirumee Saleor 2.x before 2.9.1. Incorrect access control in the checkoutCustomerAttach mutations allows attackers to attach their checkouts to any user ID and consequently leak user data (e.g., name, address, and previous orders of any other customer).

Splunk Enterprise deployment servers in versions before 9.0 allow unauthenticated downloading of forwarder bundles. Remediation requires you to update the deployment server to version 9.0 and Configure authentication for deployment servers and clients (https://docs.splunk.com/Documentation/Splunk/9.0.0/Security/ConfigDSDCAuthEnhancements#Configure_authentication_for_deployment_servers_and_clients). Once enabled, deployment servers can manage only Universal Forwarder versions 9.0 and higher. Though the vulnerability does not directly affect Universal Forwarders, remediation requires updating all Universal Forwarders that the deployment server manages to version 9.0 or higher prior to enabling the remediation.

A ZTE product is impacted by the improper access control vulnerability. Due to lack of an authentication protection mechanism in the program, attackers could use this vulnerability to gain access right through brute-force attacks. This affects: <ZXONE 19700 SNPE><ZXONE8700V1.40R2B13_SNPE>

IBM Spectrum Protect Plus 10.1.0 through 10.1.6 may allow unauthenticated and unauthorized access to VDAP proxy which can result in an attacker obtaining information they are not authorized to access. IBM X-Force ID: 193658.

In versions 3.0.0-3.5.0, 2.0.0-2.9.0, and 1.0.1, the Neural Autonomic Transport System (NATS) messaging services in use by the NGINX Controller do not require any form of authentication, so any successful connection would be authorized.

An information disclosure vulnerability exists in the OAS Engine SecureBrowseFile functionality of Open Automation Software OAS Platform V16.00.0112. A specially-crafted network request can lead to a disclosure of sensitive information. An attacker can send a network request to trigger this vulnerability.

Piwigo v12.2.0 was discovered to contain an information leak via the action parameter in /admin/maintenance_actions.php.

A vulnerability has been identified in SICAM P850 (All versions < V3.00), SICAM P850 (All versions < V3.00), SICAM P850 (All versions < V3.00), SICAM P850 (All versions < V3.00), SICAM P850 (All versions < V3.00), SICAM P850 (All versions < V3.00), SICAM P850 (All versions < V3.00), SICAM P850 (All versions < V3.00), SICAM P850 (All versions < V3.00), SICAM P850 (All versions < V3.00), SICAM P850 (All versions < V3.00), SICAM P850 (All versions < V3.00), SICAM P850 (All versions < V3.00), SICAM P850 (All versions < V3.00), SICAM P850 (All versions < V3.00), SICAM P850 (All versions < V3.00), SICAM P850 (All versions < V3.00), SICAM P850 (All versions < V3.00), SICAM P855 (All versions < V3.00), SICAM P855 (All versions < V3.00), SICAM P855 (All versions < V3.00), SICAM P855 (All versions < V3.00), SICAM P855 (All versions < V3.00), SICAM P855 (All versions < V3.00), SICAM P855 (All versions < V3.00), SICAM P855 (All versions < V3.00), SICAM P855 (All versions < V3.00), SICAM P855 (All versions < V3.00), SICAM P855 (All versions < V3.00), SICAM P855 (All versions < V3.00), SICAM P855 (All versions < V3.00), SICAM P855 (All versions < V3.00), SICAM P855 (All versions < V3.00), SICAM P855 (All versions < V3.00), SICAM P855 (All versions < V3.00), SICAM P855 (All versions < V3.00). The web based management interface of affected devices does not employ special access protection for certain internal developer views. This could allow unauthenticated users to extract internal configuration details.

An issue was discovered on Libre Wireless LS9 LS1.5/p7040 devices. There is a luci_service GETPASS Configuration Password Information Leak. The luci_service daemon running on port 7777 does not require authentication to return the device configuration password in cleartext when using the GETPASS command. As such, any unauthenticated person with access to port 7777 on the device will be able to leak the user's personal device configuration password by issuing the GETPASS command.