An Improper Validation of Integrity Check Value issue was discovered in PHOENIX CONTACT mGuard firmware versions 7.2 to 8.6.0. mGuard devices rely on internal checksums for verification of the internal integrity of the update packages. Verification may not always be performed correctly, allowing an attacker to modify firmware update packages.

Local Privilege Escalation can occur in PHOENIX CONTACT PORTICO SERVER through 3.0.7 when installed to run as a service.

Insecure, default path permissions in PHOENIX CONTACT PC WORX SRT through 1.14 allow for local privilege escalation.

The web server in Phoenix Contact ILC PLCs allows access to read and write PLC variables without authentication.

The web server in Phoenix Contact ILC PLCs can be accessed without authenticating even if the authentication mechanism is enabled.

The WebUI of PHOENIX CONTACT FL SWITCH 3xxx, 4xxx, 48xx versions prior to 1.35 is vulnerable to brute-force attacks, because of Improper Restriction of Excessive Authentication Attempts.

A vulnerability was discovered in Siemens SIMATIC WinCC Sm@rtClient for Android (All versions before V1.0.2.2) and SIMATIC WinCC Sm@rtClient for Android Lite (All versions before V1.0.2.2). An attacker with physical access to an unlocked mobile device, that has the affected app running, could bypass the app's authentication mechanism under certain conditions.

A vulnerability in the management of shell user accounts for Cisco Policy Suite (CPS) Software for CPS appliances could allow an authenticated, local attacker to gain elevated privileges on an affected system. The affected privilege level is not at the root level. The vulnerability is due to incorrect role-based access control (RBAC) for shell user accounts. An attacker could exploit this vulnerability by authenticating to an affected appliance and providing crafted user input via the CLI. A successful exploit could allow the attacker to acquire a higher privilege level than should have been granted. To exploit this vulnerability, the attacker must log in to the appliance with valid credentials. Cisco Bug IDs: CSCve37724. Known Affected Releases: 9.0.0, 9.1.0, 10.0.0, 11.0.0, 12.0.0.

A local authentication bypass vulnerability was discovered in some Aruba Instant Access Point (IAP) products in version(s): Aruba Instant 6.4.x: 6.4.4.8-4.2.4.18 and below; Aruba Instant 6.5.x: 6.5.4.15 and below; Aruba Instant 8.3.x: 8.3.0.11 and below; Aruba Instant 8.4.x: 8.4.0.5 and below; Aruba Instant 8.5.x: 8.5.0.6 and below; Aruba Instant 8.6.x: 8.6.0.2 and below. Aruba has released patches for Aruba Instant that address this security vulnerability.

Certain NETGEAR devices are affected by authentication bypass. This affects D6100 before V1.0.0.55, D7000 before V1.0.1.50, D7800 before V1.0.1.24, JNR1010v2 before 1.1.0.40, JWNR2010v5 before 1.1.0.40, R6100 before 1.0.1.12, R6220 before 1.1.0.50, R7500 before 1.0.0.108, R7500v2 before 1.0.3.10, WNDR4300v1 before 1.0.2.88, WNDR4300v2 before 1.0.0.48, WNDR4500v3 before 1.0.0.48, WNR1000v4 before 1.1.0.40, WNR2000v5 before 1.0.0.42, WNR2020 before 1.1.0.40, and WNR2050 before 1.1.0.40.

There is an improper authentication vulnerability in some Huawei AP products before version V200R009C00SPC800. Due to the improper implementation of authentication for the serial port, an attacker could exploit this vulnerability by connecting to the affected products and running a series of commands.

Bypassing lock protection exists in Nextcloud Android app 3.6.0 when creating a multi-account and aborting the process.

The 'Find Phone' function in some Huawei smart phones with software earlier than Duke-L09C10B186 versions, earlier than Duke-L09C432B187 versions, earlier than Duke-L09C636B186 versions has an authentication bypass vulnerability. Due to improper authentication realization in the 'Find Phone' function. An attacker may exploit the vulnerability to bypass the 'Find Phone' function in order to use the phone normally.

Authentication bypass vulnerability in MfeUpgradeTool in McAfee Endpoint Security (ENS) for Windows prior to 10.7.0 April 2020 Update allows administrator users to access policy settings via running this tool.

It was discovered that the gnome-shell lock screen since version 3.15.91 did not properly restrict all contextual actions. An attacker with physical access to a locked workstation could invoke certain keyboard shortcuts, and potentially other actions.

SAP Business One, version - 10.0, allows a local attacker with access to the victim's browser under certain circumstances, to login as the victim without knowing his/her password. The attacker could so obtain highly sensitive information which the attacker could use to take substantial control of the vulnerable application.

Acronis True Image prior to 2021 Update 4 for Windows and Acronis True Image prior to 2021 Update 5 for macOS allowed an unauthenticated attacker (who has a local code execution ability) to tamper with the micro-service API.

Yubico pam-u2f before 1.1.1 has a logic issue that, depending on the pam-u2f configuration and the application used, could lead to a local PIN bypass. This issue does not allow user presence (touch) or cryptographic signature verification to be bypassed, so an attacker would still need to physically possess and interact with the YubiKey or another enrolled authenticator. If pam-u2f is configured to require PIN authentication, and the application using pam-u2f allows the user to submit NULL as the PIN, pam-u2f will attempt to perform a FIDO2 authentication without PIN. If this authentication is successful, the PIN requirement is bypassed.

Inappropriate implementation in the ChromeOS Readiness Tool installer on Windows prior to 1.0.2.0 loosens DCOM access rights on two objects allowing an attacker to potentially bypass discretionary access controls.

In Arista's MOS (Metamako Operating System) software which is supported on the 7130 product line, under certain conditions, a user may be able to execute commands despite not having the privileges to do so. This issue affects: Arista Metamako Operating System All releases in the MOS-0.1x train MOS-0.32.0 and prior releases

A vulnerability in the authentication mechanism of Brocade Fabric OS versions before Brocade Fabric OS v.9.0.1a, v8.2.3a and v7.4.2h could allow a user to Login with empty password, and invalid password through telnet, ssh and REST.

Intent redirection in Samsung Experience Service versions 10.8.0.4 in Android P(9.0) below, and 12.2.0.5 in Android Q(10.0) above allows attacker to execute privileged action.

The cluster logical volume manager daemon (clvmd) in lvm2-cluster in LVM2 before 2.02.72, as used in Red Hat Global File System (GFS) and other products, does not verify client credentials upon a socket connection, which allows local users to cause a denial of service (daemon exit or logical-volume change) or possibly have unspecified other impact via crafted control commands.

In lockAllProfileTasks of RootWindowContainer.java, there is a possible way to access the work profile without the profile PIN, after logging in. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation.Product: AndroidVersions: Android-9 Android-10 Android-11 Android-8.1Android ID: A-177457096

Improper Authentication vulnerability in Bitdefender Endpoint Security for Mac allows an unprivileged process to restart the main service and potentially inject third-party code into a trusted process. This issue affects: Bitdefender Endpoint Security for Mac versions prior to 4.12.80.

In OpenBSD 6.6, local users can use the su -L option to achieve any login class (often excluding root) because there is a logic error in the main function in su/su.c.

An improper authentication check in Palo Alto Networks PAN-OS may allow an authenticated low privileged non-superuser custom role user to elevate privileges and become superuser. This issue affects PAN-OS 7.1 versions prior to 7.1.25; 8.0 versions prior to 8.0.20; 8.1 versions prior to 8.1.11; 9.0 versions prior to 9.0.5. PAN-OS version 7.0 and prior EOL versions have not been evaluated for this issue.

On NXP Kinetis KV1x, Kinetis KV3x, and Kinetis K8x devices, Flash Access Controls (FAC) (a software IP protection method for execute-only access) can be defeated by leveraging a load instruction inside the execute-only region to expose the protected code into a CPU register.

An attacker may be able to bypass the OS application filter meant to restrict applications that can be executed by changing browser preferences to launch a separate process that in turn can execute arbitrary commands.

Improper Authentication in subsystem in Intel(R) CSME versions 12.0 through 12.0.48 (IOT only: 12.0.56), versions 13.0 through 13.0.20, versions 14.0 through 14.0.10 may allow a privileged user to potentially enable escalation of privilege, denial of service or information disclosure via local access.

An elevation of privilege vulnerability exists when Windows improperly handles authentication requests, aka "Microsoft Windows Elevation of Privilege Vulnerability." This affects Windows 7, Windows Server 2012 R2, Windows RT 8.1, Windows Server 2008, Windows Server 2019, Windows Server 2012, Windows 8.1, Windows Server 2016, Windows Server 2008 R2, Windows 10, Windows 10 Servers.

Omikron MultiCash Desktop 4.00.008.SP5 relies on a client-side authentication mechanism. When a user logs into the application, the validity of the password is checked locally. All communication to the database backend is made via the same technical account. Consequently, an attacker can attach a debugger to the process or create a patch that manipulates the behavior of the login function. When the function always returns the success value (corresponding to a correct password), an attacker can login with any desired account, such as the administrative account of the application.

Pulse Secure Client 9.0R1 and 5.3RX before 5.3R5, when configured to authenticate VPN users during Windows Logon, can allow attackers to bypass Windows authentication and execute commands on the system with the privileges of Pulse Secure Client. The attacker must interrupt the client's network connectivity, and trigger a connection to a crafted proxy server with an invalid SSL certificate that allows certification-manager access, leading to the ability to browse local files and execute local programs.

Some Huawei smartphones ALP-AL00B 8.0.0.118D(C00), ALP-TL00B 8.0.0.118D(C01), BLA-AL00B 8.0.0.118D(C00), BLA-L09C 8.0.0.127(C432), 8.0.0.128(C432), 8.0.0.137(C432), BLA-L29C 8.0.0.129(C432), 8.0.0.137(C432) have an authentication bypass vulnerability. When the attacker obtains the user's smartphone, the vulnerability can be used to replace the start-up program so that the attacker can obtain the information in the smartphone and achieve the purpose of controlling the smartphone.

Authentication Bypass vulnerability in TPM autoboot in McAfee Drive Encryption (MDE) 7.1.0 and above allows physically proximate attackers to bypass local security protection via specific set of circumstances.

Authentication Bypass vulnerability in McAfee Data Loss Prevention Endpoint (DLPe) 10.0.x earlier than 10.0.510, and 11.0.x earlier than 11.0.600 allows attackers to bypass local security protection via specific conditions.

On STMicroelectronics STM32F7 devices, Proprietary Code Read Out Protection (PCROP) (a software IP protection method) can be defeated with a debug probe via the Instruction Tightly Coupled Memory (ITCM) bus.

A vulnerability classified as critical has been found in Supcon InPlant SCADA up to 20230901. Affected is an unknown function of the file Project.xml. The manipulation leads to improper authentication. An attack has to be approached locally. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-239796. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

Hijacking vulnerability in Samsung Email application version prior to SMR Feb-2021 Release 1 allows attackers to intercept when the provider is executed.

A local, authenticated attacker can bypass the passcode in the VideoLAN VLC media player app before 3.1.5 for iOS by opening a URL and turning the phone.

The Floureon IP Camera SP012 provides a root terminal on a UART serial interface without proper access control. This allows attackers with physical access to execute arbitrary commands with root privileges.

Teltonika RUT9XX routers with firmware before 00.04.233 provide a root terminal on a serial interface without proper access control. This allows attackers with physical access to execute arbitrary commands with root privileges.

A flaw was found in the way pacemaker's client-server authentication was implemented in versions up to and including 2.0.0. A local attacker could use this flaw, and combine it with other IPC weaknesses, to achieve local privilege escalation.

Improper authentication for some Intel(R) Server Boards, Server Systems and Compute Modules before version 1.59 may allow an authenticated user to potentially enable escalation of privilege via local access.

An improper authentication vulnerability in Bitdefender Endpoint Security Tools for Windows and Bitdefender Endpoint Security SDK allows an unprivileged local attacker to escalate privileges or tamper with the product's security settings. This issue affects: Bitdefender Endpoint Security Tools for Windows versions prior to 6.6.18.261. This issue affects: Bitdefender Endpoint Security Tools for Windows versions prior to 6.6.18.261. Bitdefender Endpoint Security SDK versions prior to 6.6.18.261.

A wrong configuration in Nextcloud Server 19.0.1 incorrectly made the user feel the passwordless WebAuthn is also a two factor verification by asking for the PIN of the passwordless WebAuthn but not verifying it.

SecureCore Standard Edition Version 2.x allows an attacker to bypass the product 's authentication to log in to a Windows PC.

Cisco Firepower Management Center 6.0.1 has hardcoded database credentials, which allows local users to obtain sensitive information by leveraging CLI access, aka Bug ID CSCva30370.

An XML parsing vulnerability affects IBM SAML-based single sign-on (SSO) systems (IBM Security Access Manager 9.0.0 - 9.0.4 and IBM Tivoli Federated Identity Manager 6.2 - 6.0.2.) This vulnerability can allow an attacker with authenticated access to trick SAML systems into authenticating as a different user without knowledge of the victim users password. IBM X-Force ID: 139754.