SAP NetWeaver Application Server for ABAP and ABAP Platform do not perform necessary authorization checks for an authenticated user, resulting in escalation of privileges.

SAP NetWeaver AS ABAP and ABAP Platform, versions - 700, 702, 710, 711, 730, 731, 740, 750, 751, 752, 753, 754, 755, contains function module SRM_RFC_SUBMIT_REPORT which fails to validate authorization of an authenticated user thus allowing an unauthorized user to execute reports in SAP NetWeaver ABAP Platform.

AudioCodes IP phone 420HD devices using firmware version 2.2.12.126 allow Remote Code Execution.

A vulnerability in the web management interface of Cisco Prime Collaboration Provisioning (PCP) could allow an authenticated, remote attacker to modify sensitive data that is associated with arbitrary accounts on an affected device. The vulnerability is due to a failure to enforce access restrictions on the Help Desk and User Provisioning roles that are assigned to authenticated users. This failure could allow an authenticated attacker to modify critical attributes of higher-privileged accounts on the device. A successful exploit could allow the attacker to gain elevated privileges on the device. This vulnerability affects Cisco Prime Collaboration Provisioning (PCP) Releases 12.1 and prior. Cisco Bug IDs: CSCvd61779.

A vulnerability in the batch provisioning feature of Cisco Prime Collaboration Provisioning could allow an authenticated, remote attacker to escalate privileges to the Administrator level. The vulnerability is due to insufficient authorization enforcement on batch processing. An attacker could exploit this vulnerability by uploading a batch file and having the batch file processed by the system. A successful exploit could allow the attacker to escalate privileges to the Administrator level. Cisco Bug IDs: CSCvd86578.

A missing permission check in Jenkins Chef Sinatra Plugin 1.20 and earlier allows attackers with Overall/Read permission to have Jenkins send an HTTP request to an attacker-controlled URL and have it parse an XML response.

A vulnerability was found in xujeff tianti 天梯 up to 2.3. It has been declared as critical. This vulnerability affects unknown code of the file /tianti-module-admin/user/ajax/save. The manipulation leads to missing authorization. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

dde-daemon, the daemon process of DDE (Deepin Desktop Environment) 15.0 through 15.3, runs with root privileges and hardly does anything to identify the user who calls the function through D-Bus. Anybody can change the grub config, even to append some arguments to make a backdoor or privilege escalation, by calling DoWriteGrubSettings() provided by dde-daemon.

In CloudForms Management Engine (cfme) before 5.7.3 and 5.8.x before 5.8.1, it was found that privilege check is missing when invoking arbitrary methods via filtering on VMs that MiqExpression will execute that is triggerable by API users. An attacker could use this to execute actions they should not be allowed to (e.g. destroying VMs).

A missing permission check in Jenkins SWAMP Plugin 1.2.6 and earlier allows attackers with Overall/Read permission to connect to an attacker-specified web server using attacker-specified credentials.

A vulnerability in the web interface of Cisco Prime Collaboration Provisioning (PCP) could allow an authenticated, remote attacker to escalate their privileges. The vulnerability is due to insufficient web portal access control checks. An attacker could exploit this vulnerability by modifying an access request. An exploit could allow the attacker to promote their account to any role defined on the system. This vulnerability affects Cisco Prime Collaboration Provisioning (PCP) Releases 12.2 and prior. Cisco Bug IDs: CSCvc90286.

Insufficient checks in the UDF subsystem in Firebird 2.5.x before 2.5.7 and 3.0.x before 3.0.2 allow remote authenticated users to execute code by using a 'system' entrypoint from fbudf.so.

On Franklin Fueling Systems TS-550 evo 2.3.0.7332 devices, the roleDiag user, which can be obtained by exploiting CVE-2013-7247, has the ability to upload files to the server hosting the web service. As no sanitization checks are in place, an attacker can upload a malicious payload.

Argo CD is a declarative, GitOps continuous delivery tool for Kubernetes. All unpatched versions of Argo CD starting with 1.0.0 are vulnerable to an improper access control bug, allowing a malicious user to potentially escalate their privileges to admin-level. Versions starting with 0.8.0 and 0.5.0 contain limited versions of this issue. To perform exploits, an authorized Argo CD user must have push access to an Application's source git or Helm repository or `sync` and `override` access to an Application. Once a user has that access, different exploitation levels are possible depending on their other RBAC privileges. A patch for this vulnerability has been released in Argo CD versions 2.3.2, 2.2.8, and 2.1.14. Some mitigation measures are available but do not serve as a substitute for upgrading. To avoid privilege escalation, limit who has push access to Application source repositories or `sync` + `override` access to Applications; and limit which repositories are available in projects where users have `update` access to Applications. To avoid unauthorized resource inspection/tampering, limit who has `delete`, `get`, or `action` access to Applications.

It was found that there were no permission checks performed in the Distributed Fork plugin before and including 1.5.0 for Jenkins that provides the dist-fork CLI command beyond the basic check for Overall/Read permission, allowing anyone with that permission to run arbitrary shell commands on all connected nodes.

An access control issue in hprms/admin/?page=user/list of Hospital Patient Record Management System v1.0 allows attackers to escalate privileges via accessing and editing the user list.

In Rancher 1 and 2 through 2.2.3, unprivileged users (if allowed to deploy nodes) can gain admin access to the Rancher management plane because node driver options intentionally allow posting certain data to the cloud. The problem is that a user could choose to post a sensitive file such as /root/.kube/config or /var/lib/rancher/management-state/cred/kubeconfig-system.yaml.

A vulnerability classified as critical has been found in pihome-shc PiHome 2.0. This affects an unknown part of the file /user_accounts.php?uid of the component Role-Based Access Control. The manipulation leads to missing authorization. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used.

A vulnerability has been found in JhumanJ OpnForm up to 1.9.3. This vulnerability affects unknown code of the file /custom-domains of the component API Endpoint. Such manipulation leads to missing authorization. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The name of the patch is beb153ce52dceb971c1518f98333328c95f1ba20. It is best practice to apply a patch to resolve this issue.

A vulnerability was found in SourceCodester Online Railway Reservation System 1.0. It has been declared as critical. Affected by this vulnerability is an unknown functionality of the file /admin/. The manipulation of the argument page with the input trains/schedules/system_info leads to improper authorization. The attack can be launched remotely. The exploit has been disclosed to the public and may be used.

Due to missing authorization checks, any authenticated user is able to list, upload, or delete attachments to password safe entries in Pleasant Password Server before 7.8.3. To perform those actions on an entry, the user needs to know the corresponding "CredentialId" value, which uniquely identifies a password safe entry. Since "CredentialId" values are implemented as GUIDs, they are hard to guess. However, if for example an entry's owner grants read-only access to a malicious user, the value gets exposed to the malicious user. The same holds true for temporary grants.

ATEN eco DC Missing Authorization Privilege Escalation Vulnerability. This vulnerability allows remote attackers to escalate privileges on affected installations of ATEN eco DC. Authentication is required to exploit this vulnerability. The specific flaw exists within the web-based interface. The issue results from the lack of validating the assigned user role when handling requests. An attacker can leverage this vulnerability to escalate privileges to resources normally protected from the user. Was ZDI-CAN-26647.

An issue was discovered in Softwarebuero Zauner ARC 4.2.0.4., that allows attackers to escalate privileges within the application, since all permission checks are done client-side, not server-side.

Tarantella Enterprise before 3.11 allows bypassing Access Control.

The controller of the Open Build Service API prior to version 2.4.4 is missing a write permission check, allowing an authenticated attacker to add or remove user roles from packages and/or project meta data.

SAP Commerce - versions 2105.3, 2011.13, 2005.18, 1905.34, does not perform necessary authorization checks for an authenticated user, resulting in escalation of privileges. Authenticated attackers will be able to access and edit data from b2b units they do not belong to.

Central Dogma allows privilege escalation with mirroring to the internal dogma repository that has a file managing the authorization of the project.

In Apache Ozone versions prior to 1.2.0, certain admin related SCM commands can be executed by any authenticated users, not just by admins.

A missing authority check in SAP CRM, versions - 700, 701, 702, 712, 713, 714, could be leveraged by an attacker with high privileges to compromise confidentiality, integrity, or availability of the system.

In Octopus Deploy before 4.1.3, the machine update process doesn't check that the user has access to all environments. This allows an access-control bypass because the set of environments to which a machine is scoped may include environments in which the user lacks access.

SAP NetWeaver Guided Procedures (Administration Workset), versions - 7.10, 7.20, 7.30, 7.31, 7.40, 7.50, does not perform necessary authorization checks for an authenticated user, resulting in escalation of privileges. The impact of missing authorization could result to abuse of functionality restricted to a particular user group, and could allow unauthorized users to read, modify or delete restricted data.

FatPipe WARP, IPVPN, and MPVPN software prior to versions 10.1.2r60p91 and 10.2.2r42 allows a remote, authenticated attacker with read-only privileges to grant themselves administrative privileges. Older versions of FatPipe software may also be vulnerable. The FatPipe advisory identifier for this vulnerability is FPSA001.

The HM Multiple Roles WordPress plugin before 1.3 does not have any access control to prevent low privilege users to set themselves as admin via their profile page

Several AJAX endpoints in the Tutor LMS – eLearning and online course solution WordPress plugin before 1.7.7 were unprotected, allowing students to modify course information and elevate their privileges among many other actions.

The AJAX action, wp_ajax_ninja_forms_sendwp_remote_install_handler, did not have a capability check on it, nor did it have any nonce protection, therefore making it possible for low-level users, such as subscribers, to install and activate the SendWP Ninja Forms Contact Form – The Drag and Drop Form Builder for WordPress WordPress plugin before 3.4.34 and retrieve the client_secret key needed to establish the SendWP connection while also installing the SendWP plugin.

In the Simple 301 Redirects by BetterLinks WordPress plugin before 2.0.4, a lack of capability checks and insufficient nonce check on the AJAX action, simple301redirects/admin/activate_plugin, made it possible for authenticated users to activate arbitrary plugins installed on vulnerable sites.

A lack of capability checks and insufficient nonce check on the AJAX action in the Simple 301 Redirects by BetterLinks WordPress plugin before 2.0.4, made it possible for authenticated users to install arbitrary plugins on vulnerable sites.

On versions 16.0.x before 16.0.1.1, 15.1.x before 15.1.3, and 14.1.x before 14.1.4, BIG-IP Advanced WAF and ASM are missing authorization checks for file uploads to a specific directory within the REST API which might allow Authenticated users with guest privileges to upload files. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated.

A vulnerability allowed multiple unrestricted uploads in Pulse Connect Secure before 9.1R11.4 that could lead to an authenticated administrator to perform a file write via a maliciously crafted archive upload in the administrator web interface.

SAP Payment Engine version 500, does not perform necessary authorization checks for an authenticated user, resulting in escalation of privileges.

SAP Enterprise Financial Services versions, 101, 102, 103, 104, 105, 600, 603, 604, 605, 606, 616, 617, 618, 800, does not perform necessary authorization checks for an authenticated user, resulting in escalation of privileges.

Multiple vulnerabilities in Cisco SD-WAN vManage Software could allow an unauthenticated, remote attacker to execute arbitrary code or gain access to sensitive information, or allow an authenticated, local attacker to gain escalated privileges or gain unauthorized access to the application. For more information about these vulnerabilities, see the Details section of this advisory.

Elastic Enterprise Search App Search versions before 7.14.0 are vulnerable to an issue where API keys were missing authorization via an alternate route. Using this vulnerability, an authenticated attacker could utilize API keys belonging to higher privileged users.

Multiple vulnerabilities in Cisco SD-WAN vManage Software could allow an unauthenticated, remote attacker to execute arbitrary code or gain access to sensitive information, or allow an authenticated, local attacker to gain escalated privileges or gain unauthorized access to the application. For more information about these vulnerabilities, see the Details section of this advisory.

Multiple vulnerabilities in Cisco SD-WAN vManage Software could allow an unauthenticated, remote attacker to execute arbitrary code or gain access to sensitive information, or allow an authenticated, local attacker to gain escalated privileges or gain unauthorized access to the application. For more information about these vulnerabilities, see the Details section of this advisory.

In JFrog Artifactory before 6.18, it is not possible to restrict either system or repository imports by any admin user in the enterprise, which can lead to "undesirable results."

In the RegistrationMagic plugin through 4.6.0.3 for WordPress, the user controller allows remote authenticated users (with minimal privileges) to elevate their privileges to administrator via class_rm_user_controller.php rm_user_edit.

In the RegistrationMagic plugin through 4.6.0.3 for WordPress, the export function allows remote authenticated users (with minimal privileges) to export submitted form data and settings via class_rm_form_controller.php rm_form_export.

The RegistrationMagic plugin through 4.6.0.3 for WordPress allows remote authenticated users (with minimal privileges) to import custom vulnerable forms and change form settings via class_rm_form_settings_controller.php, resulting in privilege escalation.

A flaw in the WordPress plugin, Minimal Coming Soon & Maintenance Mode through 2.10, allows authenticated users with basic access to enable and disable maintenance-mode settings (impacting the availability and confidentiality of a vulnerable site, along with the integrity of the setting).