A Remote Code Execution vulnerability in HPE Intelligent Management Center (iMC) PLAT version PLAT 7.3 (E0504) was found. The problem was resolved in HPE Intelligent Management Center PLAT v7.3 (E0506) or any subsequent version.

A Remote Code Execution vulnerability in HPE Intelligent Management Center (iMC) PLAT version PLAT 7.3 (E0504) was found. The problem was resolved in HPE Intelligent Management Center PLAT v7.3 (E0506) or any subsequent version.

A Remote Code Execution vulnerability in HPE Intelligent Management Center (iMC) PLAT version PLAT 7.3 (E0504) was found. The problem was resolved in HPE Intelligent Management Center PLAT v7.3 (E0506) or any subsequent version.

A remote code execution vulnerability was identified in HPE Intelligent Management Center (IMC) PLAT earlier than version 7.3 E0506P09.

A remote malicious file upload vulnerability in HPE Version Control Repository Manager (VCRM) was found. The problem impacts all versions prior to 7.6.

Unspecified vulnerability in HP Enterprise Discovery 2.0 through 2.52 on Windows allows remote authenticated users to execute arbitrary code via unknown vectors. NOTE: the initial description of this CVE was inadvertently associated with libxml2, but it should be for HP Enterprise Discovery.

A remote code execution vulnerability was identified in HPE Intelligent Management Center (IMC) PLAT earlier than version 7.3 E0506P09.

A remote code execution vulnerability was identified in HPE Intelligent Management Center (IMC) PLAT earlier than version 7.3 E0506P09.

Multiple unspecified vulnerabilities in HP Select Identity (HPSI) Active Directory Bidirectional LDAP Connector 2.20, 2.20.001, 2.20.002, and 2.30 allow remote attackers to execute arbitrary code via unspecified vectors.

A remote arbitrary file upload vulnerability was discovered in HPE 3PAR Service Processor version(s): prior to 5.0.5.1.

A remote code execution vulnerability was identified in HPE Intelligent Management Center (IMC) PLAT earlier than version 7.3 E0506P09.

The logins command in HP-UX B.11.31, B.11.23, and B.11.11 does not correctly report password status, which allows remote attackers to obtain privileges when certain "password issues" are not detected.

A remote code execution vulnerability was identified in HPE Intelligent Management Center (IMC) PLAT earlier than version 7.3 E0506P09.

IBM Sterling B2B Integrator Standard Edition 5.2.0.0 through 5.2.6.5_2, 6.0.0.0 through 6.0.3.2, and 6.1.0.0 could allow a remote attacker to execute arbitrary code on the system, caused by the deserialization of untrusted data. By sending specially crafted request, an attacker could exploit this vulnerability to execute arbitrary code with SYSTEM privileges. IBM X-Force ID: 172452.

A remote code execution vulnerability was identified in HPE Intelligent Management Center (IMC) PLAT earlier than version 7.3 E0506P09.

Multiple unspecified vulnerabilities in HP ArcSight Logger before 6.0P1 have unknown impact and remote authenticated attack vectors.

Directory traversal vulnerability in the fndwar web application in HP Executive Scorecard 9.40 and 9.41 allows remote authenticated users to execute arbitrary code, or obtain sensitive information or delete data, via unspecified vectors, aka ZDI-CAN-2120.

A remote code execution vulnerability was identified in HPE Intelligent Management Center (IMC) PLAT earlier than version 7.3 E0506P09.

Unspecified vulnerability in HP Service Manager (HPSM) before 7.01.71 allows remote authenticated users to execute arbitrary code via unknown vectors.

Security vulnerabilities in HPE UIoT versions 1.6, 1.5, 1.4.2, 1.4.1, 1.4.0, and 1.2.4.2 could allow unauthorized remote access and access to sensitive data. HPE has addressed this issue in HPE UIoT: * For customers with release UIoT 1.6, fixes are made available with 1.6 RP603 * For customers with release UIoT 1.5, fixes are made available with 1.5 RP503 HF3 * For customers with release older than 1.5, such as 1.4.0, 1.4.1, 1.4.2 and 1.2.4.2, the resolution will be to upgrade to 1.5 RP503 HF3 or 1.6 RP603 Customers are requested to upgrade to the updated versions or contact HPE support for further assistance.

This document describes a security vulnerability in Blade Maintenance Entity, Integrated Maintenance Entity and Maintenance Entity products. All J/H-series NonStop systems have a security vulnerability associated with an open UDP port 17185 on the Maintenance LAN which could result in information disclosure, denial-of-service attacks or local memory corruption against the affected system and a complete control of the system may also be possible. This vulnerability exists only if one gains access to the Maintenance LAN to which Blade Maintenance Entity, Integrated Maintenance Entity or Maintenance Entity product is connected. **Workaround:** Block the UDP port 17185(In the Maintenance LAN Network Switch/Firewall). Fix: Install following SPRs, which are already available: * T1805A01^AAI (Integrated Maintenance Entity) * T4805A01^AAZ (Blade Maintenance Entity). These SPRs are also usable with the following RVUs: * J06.19.00 ? J06.23.01. No fix planned for the following RVUs: J06.04.00 ? J06.18.01. No fix planned for H-Series NonStop systems. No fix planned for the product T2805 (Maintenance Entity).

HP System Management Homepage (SMH) before 7.1.1 does not properly validate input, which allows remote authenticated users to have an unspecified impact via unknown vectors.

HP System Management Homepage (SMH) before 2.1.9 for Linux, when used with Novell eDirectory, assigns the eDirectory members to the root group, which allows remote authenticated eDirectory users to gain privileges.

Unspecified vulnerability on HP NonStop Servers with software H06.x through H06.23.00 and J06.x through J06.12.00, when Samba is used, allows remote authenticated users to execute arbitrary code via unknown vectors.

HP StorageWorks Modular Smart Array P2000 G3 firmware TS100R011, TS100R025, TS100P002, TS200R005, TS201R014, and TS201R015 installs an undocumented admin account with a default "!admin" password, which allows remote attackers to gain privileges.

Multiple unspecified vulnerabilities in HP Virtual Machine Manager (VMM) before 6.0 allow remote authenticated users to execute arbitrary code via unknown vectors.

A remote code execution vulnerability was identified in HPE Intelligent Management Center (IMC) PLAT earlier than version 7.3 E0506P09.

A remote code execution vulnerability was identified in HPE Intelligent Management Center (IMC) PLAT earlier than version 7.3 E0506P09.

A remote code execution vulnerability was identified in HPE Intelligent Management Center (IMC) PLAT earlier than version 7.3 E0506P09.

A remote privilege escalation vulnerability was identified in HPE Intelligent Management Center (IMC) PLAT earlier than version 7.3 E0506P09.

A SQL injection code execution vulnerability was identified in HPE Intelligent Management Center (IMC) PLAT earlier than version 7.3 E0506P09.

A SQL injection code execution vulnerability was identified in HPE Intelligent Management Center (IMC) PLAT earlier than version 7.3 E0506P09.

A SQL injection code execution vulnerability was identified in HPE Intelligent Management Center (IMC) PLAT earlier than version 7.3 E0506P09.

A SQL injection code execution vulnerability was identified in HPE Intelligent Management Center (IMC) PLAT earlier than version 7.3 E0506P09.

A SQL injection code execution vulnerability was identified in HPE Intelligent Management Center (IMC) PLAT earlier than version 7.3 E0506P09.

A remote code execution vulnerability was identified in HPE Intelligent Management Center (IMC) PLAT earlier than version 7.3 E0506P09.

ginkgosnmp.inc in HP System Management Homepage (SMH) allows remote authenticated users to execute arbitrary commands via shell metacharacters in the PATH_INFO to smhutil/snmpchp.php.en.

A remote priviledge escalation vulnerability in HPE Matrix Operating Environment version 7.6 was found.

Aruba Airwave all versions up to, but not including, 8.2.3.1 is vulnerable to an XML external entities (XXE). XXEs are a way to permit XML parsers to access storage that exist on external systems. If an unprivileged user is permitted to control the contents of XML files, XXE can be used as an attack vector. Because the XML parser has access to the local filesystem and runs with the permissions of the web server, it can access any file that is readable by the web server and copy it to an external system of the attacker's choosing. This could include files that contain passwords, which could then lead to privilege escalation.

A SQL injection code execution vulnerability was identified in HPE Intelligent Management Center (IMC) PLAT earlier than version 7.3 E0506P09.

A remote code execution vulnerability was identified in HPE Intelligent Management Center (IMC) PLAT earlier than version 7.3 E0506P09.

A remote code exection vulnerability was identified in HPE Intelligent Management Center (IMC) PLAT earlier than version 7.3 E0506P09.

A SQL injection code execution vulnerability was identified in HPE Intelligent Management Center (IMC) PLAT earlier than version 7.3 E0506P09.

A SQL injection code execution vulnerability was identified in HPE Intelligent Management Center (IMC) PLAT earlier than version 7.3 E0506P09.

A SQL injection code execution vulnerability was identified in HPE Intelligent Management Center (IMC) PLAT earlier than version 7.3 E0506P09.

A SQL injection code execution vulnerability was identified in HPE Intelligent Management Center (IMC) PLAT earlier than version 7.3 E0506P09.

A SQL injection code execution vulnerability was identified in HPE Intelligent Management Center (IMC) PLAT earlier than version 7.3 E0506P09.

A remote code execution vulnerability was identified in HPE Intelligent Management Center (IMC) PLAT earlier than version 7.3 E0506P09.

A security vulnerability in HPE Integrated Lights-Out 5 (iLO 5) for HPE Gen10 Servers prior to v1.35, HPE Integrated Lights-Out 4 (iLO 4) prior to v2.61, HPE Integrated Lights-Out 3 (iLO 3) prior to v1.90 could be remotely exploited to execute arbitrary code leading to disclosure of information.

Aruba ClearPass prior to 6.6.9 has a vulnerability in the API that helps to coordinate cluster actions. An authenticated user with the "mon" permission could use this vulnerability to obtain cluster credentials which could allow privilege escalation. This vulnerability is only present when authenticated as a user with "mon" permission.