pandas through 1.0.3 can unserialize and execute commands from an untrusted file that is passed to the read_pickle() function, if __reduce__ makes an os.system call. NOTE: third parties dispute this issue because the read_pickle() function is documented as unsafe and it is the user's responsibility to use the function in a secure manner

Apache Camel RabbitMQ enables Java deserialization by default. Apache Camel 2.22.x, 2.23.x, 2.24.x, 2.25.0, 3.0.0 up to 3.1.0 are affected. 2.x users should upgrade to 2.25.1, 3.x users should upgrade to 3.2.0.

A deserialization vulnerability existed in dubbo 2.7.5 and its earlier versions, which could lead to malicious code execution. Most Dubbo users use Hessian2 as the default serialization/deserialization protool, during Hessian2 deserializing the HashMap object, some functions in the classes stored in HasMap will be executed after a series of program calls, however, those special functions may cause remote command execution. For example, the hashCode() function of the EqualsBean class in rome-1.7.0.jar will cause the remotely load malicious classes and execute malicious code by constructing a malicious request. This issue was fixed in Apache Dubbo 2.6.9 and 2.7.8.

OneDev is an all-in-one devops platform. In OneDev before version 4.0.3, there is a critical vulnerability which can lead to pre-auth remote code execution. AttachmentUploadServlet deserializes untrusted data from the `Attachment-Support` header. This Servlet does not enforce any authentication or authorization checks. This issue may lead to pre-auth remote code execution. This issue was fixed in 4.0.3 by removing AttachmentUploadServlet and not using deserialization

KollectApps before 4.8.16c is affected by insecure Java deserialization, leading to Remote Code Execution via a ysoserial.payloads.CommonsCollections parameter.

MonoX through 5.1.40.5152 allows remote code execution via HTML5Upload.ashx or Pages/SocialNetworking/lng/en-US/PhotoGallery.aspx because of deserialization in ModuleGallery.HTML5Upload, ModuleGallery.SilverLightUploadModule, HTML5Upload, and SilverLightUploadHandler.

Incorrect origin serialization of URLs with IPv6 addresses could lead to incorrect security checks. This vulnerability affects Firefox < 76.

An issue was discovered in EJBCA before 6.15.2.6 and 7.x before 7.3.1.2. In several sections of code, the verification of serialized objects sent between nodes (connected via the Peers protocol) allows insecure objects to be deserialized.

A specially crafted communication packet sent to the affected devices could allow remote code execution and a denial-of-service condition due to a deserialization vulnerability. This issue affects: Mitsubishi Electric MC Works64 version 4.02C (10.95.208.31) and earlier, all versions; Mitsubishi Electric MC Works32 version 3.00A (9.50.255.02); ICONICS GenBroker64, Platform Services, Workbench, FrameWorX Server version 10.96 and prior; ICONICS GenBroker32 version 9.5 and prior.

An issue was found in Apache Airflow versions 1.10.10 and below. When using CeleryExecutor, if an attack can connect to the broker (Redis, RabbitMQ) directly, it was possible to insert a malicious payload directly to the broker which could lead to a deserialization attack (and thus remote code execution) on the Worker.

Apache Camel Netty enables Java deserialization by default. Apache Camel 2.22.x, 2.23.x, 2.24.x, 2.25.0, 3.0.0 up to 3.1.0 are affected. 2.x users should upgrade to 2.25.1, 3.x users should upgrade to 3.2.0.

The package topthink/framework before 6.0.12 are vulnerable to Deserialization of Untrusted Data due to insecure unserialize method in the Driver class.

Due to use of unsafe YAML deserialization logic, an attacker with the ability to modify local YAML configuration files could provide malicious input, resulting in remote code execution or similar risks. This issue affects ParlAI prior to v1.1.0.

The specific function of HR Portal of Soar Cloud System accepts any type of object to be deserialized. Attackers can send malicious serialized objects to execute arbitrary commands.

OneDev is an all-in-one devops platform. In OneDev before version 4.0.3, a Kubernetes REST endpoint exposes two methods that deserialize untrusted data from the request body. These endpoints do not enforce any authentication or authorization checks. This issue may lead to pre-auth RCE. This issue was fixed in 4.0.3 by not using deserialization at KubernetesResource side.

There is a command execution vulnerability in a ZTE conference management system. As some services are enabled by default, the attacker could exploit this vulnerability to execute arbitrary commands by sending specific serialization command.

The Proofpoint Insider Threat Management Server (formerly ObserveIT Server) before 7.9.1 contains a vulnerability in the ITM application server's WriteWindowMouseWithChunksV2 API. The vulnerability allows an anonymous remote attacker to execute arbitrary code with local administrator privileges. The vulnerability is caused by improper deserialization.

A remote code execution vulnerability was identified in HPE Intelligent Management Center (IMC) PLAT earlier than version 7.3 E0506P09.

It was found that xstream API version 1.4.10 before 1.4.11 introduced a regression for a previous deserialization flaw. If the security framework has not been initialized, it may allow a remote attacker to run arbitrary shell commands when unmarshalling XML or any supported format. e.g. JSON. (regression of CVE-2013-7285)

This vulnerability allows remote attackers to execute arbitrary code on affected installations of NEC ESMPRO Manager 6.42. Authentication is not required to exploit this vulnerability. The specific flaw exists within the RMI service. The issue results from the lack of proper validation of user-supplied data, which can result in deserialization of untrusted data. An attacker can leverage this vulnerability to execute code in the context of SYSTEM. Was ZDI-CAN-10007.

The Proofpoint Insider Threat Management Server (formerly ObserveIT Server) before 7.9.1 contains a vulnerability in the ITM application server's WriteWindowMouse API. The vulnerability allows an anonymous remote attacker to execute arbitrary code with local administrator privileges. The vulnerability is caused by improper deserialization.

The Proofpoint Insider Threat Management Server (formerly ObserveIT Server) before 7.9.1 contains a vulnerability in the ITM application server's WriteImage API. The vulnerability allows an anonymous remote attacker to execute arbitrary code with local administrator privileges. The vulnerability is caused by improper deserialization.

Magento-lts is a long-term support alternative to Magento Community Edition (CE). In magento-lts versions 19.4.12 and prior and 20.0.8 and prior, there is a vulnerability caused by the unsecured deserialization of an object. A patch in versions 19.4.13 and 20.0.9 was back ported from Zend Framework 3. The vulnerability was assigned CVE-2021-3007 in Zend Framework.

In Apache Commons Beanutils 1.9.2, a special BeanIntrospector class was added which allows suppressing the ability for an attacker to access the classloader via the class property available on all Java objects. We, however were not using this by default characteristic of the PropertyUtilsBean.

Contao CMS through 3.2.4 has PHP Object Injection Vulnerabilities

XStream is a Java library to serialize objects to XML and back again. In XStream before version 1.4.16, there is a vulnerability which may allow a remote attacker to load and execute arbitrary code from a remote host only by manipulating the processed input stream. No user is affected, who followed the recommendation to setup XStream's security framework with a whitelist limited to the minimal required types. If you rely on XStream's default blacklist of the Security Framework, you will have to use at least version 1.4.16.

This vulnerability allows remote attackers to execute arbitrary code on affected installations of VEEAM One Agent 9.5.4.4587. Authentication is not required to exploit this vulnerability. The specific flaw exists within the PerformHandshake method. The issue results from the lack of proper validation of user-supplied data, which can result in deserialization of untrusted data. An attacker can leverage this vulnerability to execute code in the context of the service account. Was ZDI-CAN-10400.

This vulnerability allows remote attackers to execute arbitrary code on affected installations of VEEAM One Agent 9.5.4.4587. Authentication is not required to exploit this vulnerability. The specific flaw exists within the HandshakeResult method. The issue results from the lack of proper validation of user-supplied data, which can result in deserialization of untrusted data. An attacker can leverage this vulnerability to execute code in the context of the service account. Was ZDI-CAN-10401.

XStream is a Java library to serialize objects to XML and back again. In XStream before version 1.4.16, there is a vulnerability which may allow a remote attacker to execute arbitrary code only by manipulating the processed input stream. No user is affected, who followed the recommendation to setup XStream's security framework with a whitelist limited to the minimal required types. If you rely on XStream's default blacklist of the Security Framework, you will have to use at least version 1.4.16.

XStream is a Java library to serialize objects to XML and back again. In XStream before version 1.4.16, there is a vulnerability which may allow a remote attacker to load and execute arbitrary code from a remote host only by manipulating the processed input stream. No user is affected, who followed the recommendation to setup XStream's security framework with a whitelist limited to the minimal required types. If you rely on XStream's default blacklist of the Security Framework, you will have to use at least version 1.4.16.

XStream is a Java library to serialize objects to XML and back again. In XStream before version 1.4.16, there is a vulnerability which may allow a remote attacker to load and execute arbitrary code from a remote host only by manipulating the processed input stream. No user is affected, who followed the recommendation to setup XStream's security framework with a whitelist limited to the minimal required types. If you rely on XStream's default blacklist of the Security Framework, you will have to use at least version 1.4.16.

Dell SRM versions prior to 4.5.0.1 and Dell SMR versions prior to 4.5.0.1 contain an Untrusted Deserialization Vulnerability. A remote unauthenticated attacker may potentially exploit this vulnerability, leading to arbitrary privileged code execution on the vulnerable application. The severity is Critical as this may lead to system compromise by unauthenticated attackers.

eDeploy has RCE via cPickle deserialization of untrusted data

JYaml through 1.3 allows remote code execution during deserialization of a malicious payload through the load() function. NOTE: this is a discontinued product.

In Apache Ignite before 2.4.8 and 2.5.x before 2.5.3, the serialization mechanism does not have a list of classes allowed for serialization/deserialization, which makes it possible to run arbitrary code when 3-rd party vulnerable classes are present in Ignite classpath. The vulnerability can be exploited if the one sends a specially prepared form of a serialized object to GridClientJdkMarshaller deserialization endpoint.

A code injection in cryo 0.0.6 allows an attacker to arbitrarily execute code due to insecure implementation of deserialization.

The Management Console in GitHub Enterprise 2.8.x before 2.8.7 has a deserialization issue that allows unauthenticated remote attackers to execute arbitrary code. This occurs because the enterprise session secret is always the same, and can be found in the product's source code. By sending a crafted cookie signed with this secret, one can call Marshal.load with arbitrary data, which is a problem because the Marshal data format allows Ruby objects.

pearweb < 1.32 suffers from Deserialization of Untrusted Data.

SharedSecretClusterAuthenticator in Atlassian Bitbucket Data Center versions 5.14.0 and later before 7.6.14, 7.7.0 and later prior to 7.17.6, 7.18.0 and later prior to 7.18.4, 7.19.0 and later prior to 7.19.4, and 7.20.0 allow a remote, unauthenticated attacker to execute arbitrary code via Java deserialization.

All versions of package com.bstek.ureport:ureport2-console are vulnerable to Remote Code Execution by connecting to a malicious database server, causing arbitrary file read and deserialization of local gadgets.

FasterXML jackson-databind 2.x before 2.9.8 might allow attackers to have unspecified impact by leveraging failure to block the axis2-transport-jms class from polymorphic deserialization.

The package gatsby-plugin-mdx before 2.14.1, from 3.0.0 and before 3.15.2 are vulnerable to Deserialization of Untrusted Data when passing input through to the gray-matter package, due to its default configurations that are missing input sanitization. Exploiting this vulnerability is possible when passing input in both webpack (MDX files in src/pages or MDX file imported as a component in frontend / React code) and data mode (querying MDX nodes via GraphQL). Workaround: If an older version of gatsby-plugin-mdx must be used, input passed into the plugin should be sanitized ahead of processing.

The default configuration of the ObjectRepresentation class in Restlet before 2.1.4 deserializes objects from untrusted sources, which allows remote attackers to execute arbitrary Java code via a serialized object, a different vulnerability than CVE-2013-4221.

The Skyoftech So Listing Tabs module 2.2.0 for OpenCart allows a remote attacker to inject a serialized PHP object via the setting parameter, potentially resulting in the ability to write to files on the server, cause DoS, and achieve remote code execution because of deserialization of untrusted data.

If an on-premise installation of the Pega Platform is configured with the port for the JMX interface exposed to the Internet and port filtering is not properly configured, then it may be possible to upload serialized payloads to attack the underlying system. This does not affect systems running on PegaCloud due to its design and architecture.

Magento versions 1.14.4.5 and earlier, and 1.9.4.5 and earlier have a php object injection vulnerability. Successful exploitation could lead to arbitrary code execution.

CodeIgniter is an open source PHP full-stack web framework. Deserialization of Untrusted Data was found in the `old()` function in CodeIgniter4. Remote attackers may inject auto-loadable arbitrary objects with this vulnerability, and possibly execute existing PHP code on the server. We are aware of a working exploit, which can lead to SQL injection. Users are advised to upgrade to v4.1.6 or later. Users unable to upgrade as advised to not use the `old()` function and form_helper nor `RedirectResponse::withInput()` and `redirect()->withInput()`.

The Cubecart::_basket method in classes/cubecart.class.php in CubeCart 5.0.0 through 5.2.0 allows remote attackers to unserialize arbitrary PHP objects via a crafted shipping parameter, as demonstrated by modifying the application configuration using the Config object.

Manipulating classpath asset file URLs, an attacker could guess the path to a known file in the classpath and have it downloaded. If the attacker found the file with the value of the tapestry.hmac-passphrase configuration symbol, most probably the webapp's AppModule class, the value of this symbol could be used to craft a Java deserialization attack, thus running malicious injected Java code. The vector would be the t:formdata parameter from the Form component.

ThinkPHP v6.0.12 was discovered to contain a deserialization vulnerability via the component vendor\league\flysystem-cached-adapter\src\Storage\AbstractCache.php. This vulnerability allows attackers to execute arbitrary code via a crafted payload.