The SNMP module in Cisco IOS XR allows remote authenticated users to cause a denial of service (process restart) via crafted SNMP packets, aka Bug ID CSCue69472.
Memory leak on Cisco Adaptive Security Appliances (ASA) 5500 series devices with software 8.2 through 8.4 allows remote authenticated users to cause a denial of service (memory consumption and blank response page) by using the clientless WebVPN feature, aka Bug ID CSCth34278.
Cisco NX-OS 6.0(2)U6(0.46) on N3K devices allows remote authenticated users to cause a denial of service (temporary SNMP outage) via an SNMP request for an OID that does not exist, aka Bug ID CSCuw36684.
Cisco Secure Access Control Server (ACS) Solution Engine 5.7(0.15) allows remote authenticated users to cause a denial of service (SSH screen process crash) via crafted (1) CLI or (2) GUI commands, aka Bug ID CSCuw24694.
The Tomcat throttling feature in Cisco Unified Communications Manager 10.5(1.99995.9) allows remote authenticated users to cause a denial of service (management outage) by sending many requests, aka Bug ID CSCuu99709.
Multiple buffer overflows in the administrative web interface in Cisco Unified Computing System (UCS) allow remote authenticated users to cause a denial of service (memory corruption and session termination) via long string values for unspecified parameters, aka Bug ID CSCtg20751.
Cisco IOS XR 5.1.1.K9SEC allows remote authenticated users to cause a denial of service (vty error, and SSH and TELNET outage) via a crafted disconnect action within an SSH session, aka Bug ID CSCul63127.
Cisco Unity Connection (UC) 7.1, 8.0, and 8.5 allows remote authenticated users to cause a denial of service (resource consumption and administration outage) via extended use of the product, aka Bug ID CSCtd79132.
Cisco IOS before 12.2(33)SXI allows remote authenticated users to cause a denial of service (device reboot).
Cisco TelePresence Video Communication Server (VCS) X8.5.1 and X8.5.2 allows remote authenticated users to cause a denial of service (VoIP outage) via a crafted SIP message, aka Bug ID CSCuu43026.
Cisco Adaptive Security Appliance (ASA) Software 9.0 through 9.5.1 mishandles IPsec error processing, which allows remote authenticated users to cause a denial of service (memory consumption) via crafted (1) LAN-to-LAN or (2) Remote Access VPN tunnel packets, aka Bug ID CSCuv70576.
Buffer overflow in the web-based management interface on Cisco RV110W devices with firmware through 1.2.1.4, RV130W devices with firmware through 1.0.2.7, and RV215W devices with firmware through 1.3.0.7 allows remote authenticated users to cause a denial of service (device reload) via a crafted HTTP request, aka Bug ID CSCux86669.
A vulnerability in the implementation of the Intermediate System–to–Intermediate System (IS–IS) routing protocol functionality in Cisco IOS XR Software could allow an authenticated, remote attacker to cause a denial of service (DoS) condition in the IS–IS process. The vulnerability is due to improper handling of a Simple Network Management Protocol (SNMP) request for specific Object Identifiers (OIDs) by the IS–IS process. An attacker could exploit this vulnerability by sending a crafted SNMP request to the affected device. A successful exploit could allow the attacker to cause a DoS condition in the IS–IS process.
Cisco Unified Computing System (UCS) 1.4 and 2.0 allows remote authenticated users to cause a denial of service (device reload) via a malformed SNMP request to a Fabric Interconnect (FI) device, aka Bug ID CSCts32452.
Cisco Unified Computing System (UCS) 1.4 and 2.0 allows remote authenticated users to cause a denial of service (device reload) via a malformed SNMP request to a Fabric Interconnect (FI) device, aka Bug ID CSCts32463.
The self-service application in Cisco Unified Communications Domain Manager (CUCDM) 10.6(1) allows remote authenticated users to cause a denial of service (subapplication outage) via malformed requests, aka Bug ID CSCuu10981.
The SNMPv2 implementation in Cisco IOS XR allows remote authenticated users to cause a denial of service (snmpd daemon reload) via a malformed SNMP packet, aka Bug ID CSCur25858.
A vulnerability in the Simple Network Management Protocol (SNMP) input packet processor of Cisco FXOS Software and Cisco NX-OS Software could allow an authenticated, remote attacker to cause the SNMP application on an affected device to restart unexpectedly. The vulnerability is due to improper validation of Abstract Syntax Notation One (ASN.1)-encoded variables in SNMP packets. An attacker could exploit this vulnerability by sending a crafted SNMP packet to the SNMP daemon on the affected device. A successful exploit could allow the attacker to cause the SNMP application to restart multiple times, leading to a system-level restart and a denial of service (DoS) condition.
The XML parser in Cisco TelePresence Management Suite (TMS) 14.3(.2) and earlier does not properly handle external entities, which allows remote authenticated users to cause a denial of service via POST requests, aka Bug ID CSCus51494.
Multiple vulnerabilities in the web engine of Cisco TelePresence Collaboration Endpoint (CE) Software and Cisco RoomOS Software could allow a remote attacker to cause a denial of service (DoS) condition, view sensitive data on an affected device, or redirect users to an attacker-controlled destination. For more information about these vulnerabilities, see the Details section of this advisory.
A vulnerability in the Simple Network Management Protocol (SNMP) feature of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an authenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by sending a crafted SNMP request to an affected device. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a DoS condition.
A vulnerability in the SSL/TLS client of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an authenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to improper memory management when a device initiates SSL/TLS connections. An attacker could exploit this vulnerability by ensuring that the device will connect to an SSL/TLS server that is using specific encryption parameters. A successful exploit could allow the attacker to cause the affected device to unexpectedly reload, resulting in a DoS condition.
Multiple vulnerabilities in the web engine of Cisco TelePresence Collaboration Endpoint (CE) Software and Cisco RoomOS Software could allow a remote attacker to cause a denial of service (DoS) condition, view sensitive data on an affected device, or redirect users to an attacker-controlled destination. For more information about these vulnerabilities, see the Details section of this advisory.
Cisco Identity Services Engine (ISE) 1.2(.1 patch 2) and earlier does not properly handle deadlock conditions during reception of crafted RADIUS accounting packets from multiple NAS devices, which allows remote authenticated users to cause a denial of service (RADIUS outage) by sourcing these packets from two origins, aka Bug ID CSCuo56780.
The session-termination functionality on Cisco ONS 15454 controller cards with software 9.6 and earlier does not initialize an unspecified pointer, which allows remote authenticated users to cause a denial of service (card reset) via crafted session-close actions, aka Bug ID CSCug97416.
A vulnerability in the Java Management Extensions (JMX) component of Cisco Unified Communications Manager (Unified CM) and Cisco Unified Communications Manager Session Management Edition (Unified CM SME) could allow an authenticated, remote attacker to cause a denial of service (DoS) condition on an affected system. This vulnerability is due to an unsecured TCP/IP port. An attacker could exploit this vulnerability by accessing the port and restarting the JMX process. A successful exploit could allow the attacker to cause a DoS condition on an affected system.
Memory leak in the SNMP module in Cisco IOS XR allows remote authenticated users to cause a denial of service (memory consumption and process restart) via crafted SNMP packets, aka Bug ID CSCue31546.
A vulnerability in the dashboard widget of Cisco Firepower Management Center (FMC) Software could allow an authenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to improper restrictions on XML entities. An attacker could exploit this vulnerability by crafting an XML-based widget on an affected server. A successful exploit could cause increased memory and CPU utilization, which could result in a DoS condition.
Multiple vulnerabilities in Cisco Jabber for Windows, Cisco Jabber for MacOS, and Cisco Jabber for mobile platforms could allow an attacker to execute arbitrary programs on the underlying operating system with elevated privileges, access sensitive information, intercept protected network traffic, or cause a denial of service (DoS) condition. For more information about these vulnerabilities, see the Details section of this advisory.
A vulnerability in the web server authentication of Cisco IOS XE Software could allow an authenticated, remote attacker to crash the web server on the device. The vulnerability is due to insufficient input validation during authentication. An attacker could exploit this vulnerability by entering unexpected characters during a valid authentication. A successful exploit could allow the attacker to crash the web server on the device, which must be manually recovered by disabling and re-enabling the web server.
A vulnerability in the web proxy functionality of Cisco AsyncOS Software for Cisco Web Security Appliances could allow an unauthenticated, remote attacker to exhaust system memory and cause a denial of service (DoS) condition on an affected system. The vulnerability exists because the affected software improperly manages memory resources for TCP connections to a targeted device. An attacker could exploit this vulnerability by establishing a high number of TCP connections to the data interface of an affected device via IPv4 or IPv6. A successful exploit could allow the attacker to exhaust system memory, which could cause the system to stop processing new connections and result in a DoS condition. System recovery may require manual intervention. Cisco Bug IDs: CSCvf36610.
A vulnerability in the egress packet processing functionality of the Cisco StarOS operating system for Cisco Aggregation Services Router (ASR) 5700 Series devices and Virtualized Packet Core (VPC) System Software could allow an unauthenticated, remote attacker to cause an interface on the device to cease forwarding packets. The device may need to be manually reloaded to clear this Interface Forwarding Denial of Service condition. The vulnerability is due to the failure to properly check that the length of a packet to transmit does not exceed the maximum supported length of the network interface card (NIC). An attacker could exploit this vulnerability by sending a crafted IP packet or a series of crafted IP fragments through an interface on the targeted device. A successful exploit could allow the attacker to cause the network interface to cease forwarding packets. This vulnerability could be triggered by either IPv4 or IPv6 network traffic. This vulnerability affects the following Cisco products when they are running the StarOS operating system and a virtual interface card is installed on the device: Aggregation Services Router (ASR) 5700 Series, Virtualized Packet Core-Distributed Instance (VPC-DI) System Software, Virtualized Packet Core-Single Instance (VPC-SI) System Software. Cisco Bug IDs: CSCvf32385.
The ethernet-lldp component in Cisco IOS 12.2 before 12.2(33)SXJ1 does not properly support a large number of LLDP Management Address (MA) TLVs, which allows remote attackers to cause a denial of service (device crash) via crafted LLDPDUs, aka Bug ID CSCtj22354.
A vulnerability in the Secure Sockets Layer (SSL) packet reassembly functionality of the detection engine in Cisco Firepower System Software could allow an unauthenticated, remote attacker to cause the detection engine to consume excessive system memory on an affected device, which could cause a denial of service (DoS) condition. The vulnerability is due to the affected software improperly handling changes to SSL connection states. An attacker could exploit this vulnerability by sending crafted SSL connections through an affected device. A successful exploit could allow the attacker to cause the detection engine to consume excessive system memory on the affected device, which could cause a DoS condition. The device may need to be reloaded manually to recover from this condition. This vulnerability affects Cisco Firepower System Software Releases 6.0.0 and later, running on any of the following Cisco products: Adaptive Security Appliance (ASA) 5500-X Series Firewalls with FirePOWER Services, Adaptive Security Appliance (ASA) 5500-X Series Next-Generation Firewalls, Advanced Malware Protection (AMP) for Networks, 7000 Series Appliances, Advanced Malware Protection (AMP) for Networks, 8000 Series Appliances, Firepower 4100 Series Appliances, FirePOWER 7000 Series Appliances, FirePOWER 8000 Series Appliances, Firepower 9300 Series Security Appliances, Firepower Threat Defense for Integrated Services Routers (ISRs), Firepower Threat Defense Virtual for VMware, Industrial Security Appliance 3000, Sourcefire 3D System Appliances. Cisco Bug IDs: CSCve23031.
A vulnerability in the Local Packet Transport Services (LPTS) feature set of Cisco ASR 9000 Series Aggregation Services Router Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to a lack of input and validation checking on certain Precision Time Protocol (PTP) ingress traffic to an affected device. An attacker could exploit this vulnerability by injecting malformed traffic into an affected device. A successful exploit could allow the attacker to cause services on the device to become unresponsive, resulting in a DoS condition. Cisco Bug IDs: CSCvj22858.
A vulnerability in the internal packet-processing functionality of Cisco Firepower Threat Defense (FTD) Software for Cisco Firepower 2100 Series Security Appliances could allow an unauthenticated, remote attacker to cause an affected device to stop processing traffic, resulting in a denial of service (DoS) condition. The vulnerability is due to the affected software improperly validating IP Version 4 (IPv4) and IP Version 6 (IPv6) packets after the software reassembles the packets (following IP Fragmentation). An attacker could exploit this vulnerability by sending a series of malicious, fragmented IPv4 or IPv6 packets to an affected device. A successful exploit could allow the attacker to cause Snort processes on the affected device to hang at 100% CPU utilization, which could cause the device to stop processing traffic and result in a DoS condition until the device is reloaded manually. This vulnerability affects Cisco Firepower Threat Defense (FTD) Software Releases 6.2.1 and 6.2.2, if the software is running on a Cisco Firepower 2100 Series Security Appliance. Cisco Bug IDs: CSCvf91098.
A vulnerability in the TCP throttling process of Cisco Prime Network could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to insufficient rate limiting protection for TCP listening ports. An attacker could exploit this vulnerability by sending the affected device a high rate of TCP SYN packets to the local IP address of the targeted application. A successful exploit could allow the attacker to cause the device to consume a high amount of memory and become slow, or to stop accepting new TCP connections to the application. Cisco Bug IDs: CSCvg48152.
The Neighbor Discovery (ND) protocol implementation in the IPv6 stack in Cisco IOS before 15.0(1)XA5 allows remote attackers to cause a denial of service (CPU consumption and device hang) by sending many Router Advertisement (RA) messages with different source addresses, as demonstrated by the flood_router6 program in the thc-ipv6 package, aka Bug ID CSCti33534.
A vulnerability in the Cisco Aironet Series Access Points (APs) software could allow an authenticated, adjacent attacker to cause an affected device to reload unexpectedly, resulting in a denial of service (DoS) condition. The vulnerability is due to a deadlock condition that may occur when an affected AP attempts to dequeue aggregated traffic that is destined to an attacker-controlled wireless client. An attacker who can successfully transition between multiple Service Set Identifiers (SSIDs) hosted on the same AP while replicating the required traffic patterns could trigger the deadlock condition. A watchdog timer that detects the condition will trigger a reload of the device, resulting in a DoS condition while the device restarts.
CallManager Express (CME) on Cisco IOS before 15.0(1)XA1 does not properly handle SIP TRUNK traffic that contains rate bursts and a "peculiar" request size, which allows remote attackers to cause a denial of service (memory consumption) by sending this traffic over a long duration, aka Bug ID CSCtb47950.
A vulnerability in the application server of the Cisco Unified Customer Voice Portal (CVP) could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on the affected device. The vulnerability is due to malformed SIP INVITE traffic received on the CVP during communications with the Cisco Virtualized Voice Browser (VVB). An attacker could exploit this vulnerability by sending malformed SIP INVITE traffic to the targeted appliance. An exploit could allow the attacker to impact the availability of services and data on the device, causing a DoS condition. This vulnerability affects Cisco Unified CVP running any software release prior to 11.6(1). Cisco Bug IDs: CSCve85840.
A vulnerability in the file descriptor handling of Cisco TelePresence Video Communication Server (VCS) Expressway could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition. The vulnerability is due to exhaustion of file descriptors while processing a high volume of traffic. An attacker could exploit this vulnerability by establishing a high number of concurrent TCP connections to the vulnerable system. An exploit could allow the attacker to cause a restart in a specific process, resulting in a temporary interruption of service. Cisco Bug IDs: CSCvh77056, CSCvh77058, CSCvh95264.
A vulnerability in management interface access control list (ACL) configuration of Cisco NX-OS System Software could allow an unauthenticated, remote attacker to bypass configured ACLs on the management interface. This could allow traffic to be forwarded to the NX-OS CPU for processing, leading to high CPU utilization and a denial of service (DoS) condition. The vulnerability is due to a bad code fix in the 7.3.2 code train that could allow traffic to the management interface to be misclassified and not match the proper configured ACLs. An attacker could exploit this vulnerability by sending crafted traffic to the management interface. An exploit could allow the attacker to bypass the configured management interface ACLs and impact the CPU of the targeted device, resulting in a DoS condition. This vulnerability affects the following Cisco products running Cisco NX-OS System Software: Multilayer Director Switches, Nexus 2000 Series Switches, Nexus 3000 Series Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Nexus 9000 Series Switches in standalone NX-OS mode. Cisco Bug IDs: CSCvf31132.
A vulnerability in IPv6 ingress packet processing for Cisco UCS Central Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition due to high CPU utilization on the targeted device. The vulnerability is due to insufficient rate limiting protection for IPv6 ingress traffic. An attacker could exploit this vulnerability by sending the affected device a high rate of IPv6 packets. Successful exploitation could allow the attacker to cause a DoS condition due to CPU and resource constraints. Cisco Bug IDs: CSCuv34544.
A vulnerability in the memory management of Cisco Adaptive Security Appliance (ASA) Software and Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to improper resource management when connection rates are high. An attacker could exploit this vulnerability by opening a significant number of connections on an affected device. A successful exploit could allow the attacker to cause the device to reload, resulting in a DoS condition.
Multiple vulnerabilities in the Cisco ATA 190 Series Analog Telephone Adapter Software could allow an attacker to perform a command injection attack resulting in remote code execution or cause a denial of service (DoS) condition on an affected device. For more information about these vulnerabilities, see the Details section of this advisory.
A vulnerability in the Cisco Discovery Protocol (CDP) module of Cisco IOS XE Software Releases 16.6.1 and 16.6.2 could allow an unauthenticated, adjacent attacker to cause a memory leak that may lead to a denial of service (DoS) condition. The vulnerability is due to incorrect processing of certain CDP packets. An attacker could exploit this vulnerability by sending certain CDP packets to an affected device. A successful exploit could cause an affected device to continuously consume memory and eventually result in a memory allocation failure that leads to a crash, triggering a reload of the affected device.
A vulnerability in the implementation of a specific CLI command and the associated Simple Network Management Protocol (SNMP) MIB for Cisco NX-OS (in standalone NX-OS mode) on Cisco Nexus 3000 and 9000 Series Switches could allow an authenticated, remote attacker to exhaust system memory on an affected device, resulting in a denial of service (DoS) condition. The vulnerability is due to the incorrect implementation of the CLI command, resulting in a failure to free all allocated memory upon completion. An attacker could exploit this vulnerability by authenticating to the affected device and repeatedly issuing a specific CLI command or sending a specific SNMP poll request for a specific Object Identifier (OID). A successful exploit could allow the attacker to cause the IP routing process to restart or to cause a device reset, resulting in a DoS condition. Cisco Bug IDs: CSCvf23136.
A vulnerability in the 802.11r Fast Transition feature set of Cisco IOS Access Points (APs) Software could allow an unauthenticated, adjacent attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to a corruption of certain timer mechanisms triggered by specific roaming events. This corruption will eventually cause a timer crash. An attacker could exploit this vulnerability by sending malicious reassociation events multiple times to the same AP in a short period of time, causing a DoS condition on the affected AP.
A vulnerability in the DHCPv6 feature of the Cisco Nexus 9000 Series Fabric Switches in Application-Centric Infrastructure (ACI) Mode could allow an unauthenticated, remote attacker to cause the device to run low on system memory, which could result in a Denial of Service (DoS) condition on an affected system. The vulnerability is due to improper memory management when DHCPv6 packets are received on an interface of the targeted device. An attacker could exploit this vulnerability by sending a high number of malicious DHCPv6 packets to be processed by an affected device. A successful exploit could allow the attacker to cause the system to run low on memory, which could cause an eventual reboot of an affected device. The vulnerability only applies to IPv6 protocol packets and not for IPv4 protocol packets. This vulnerability affects Cisco Nexus 9000 Series Fabric Switches in ACI Mode running software version 13.0(1k). The vulnerability can only be exploited when unicast routing is enabled on the Bridge Domain (BD). DHCP and DHCP relay do not have to be configured for the vulnerability to be exploited. Cisco Bug IDs: CSCvg38918.