Cisco Unified Presence Server (CUPS) 8.6, 9.0, and 9.1 before 9.1.1 allows remote attackers to cause a denial of service (CPU consumption) via crafted packets to the SIP TCP port, aka Bug ID CSCua89930.

The generic input/output control implementation in Cisco IOS does not properly manage buffers, which allows remote authenticated users to cause a denial of service (device reload) by sending many SNMP requests at the same time, aka Bug ID CSCub41105.

Buffer overflow in the exception handler in Cisco WebEx Recording Format (WRF) player T27 LD before SP32 EP16, T27 L10N before SP32_ORION111, and T28 before T28.8 allows remote attackers to execute arbitrary code or cause a denial of service (memory corruption) via a crafted WRF file, aka Bug ID CSCuc27639.

The mDNS snooping functionality on Cisco Wireless LAN Controller (WLC) devices with software 7.4.1.54 and earlier does not properly manage buffers, which allows remote authenticated users to cause a denial of service (device reload) via crafted mDNS packets, aka Bug ID CSCue04153.

Cisco Tivoli Business Service Manager (TBSM) in Hosted Collaboration Mediation (HCM) in Cisco Hosted Collaboration Solution allows remote attackers to cause a denial of service (temporary service hang) by sending many TCP packets to certain ports, aka Bug ID CSCue03703.

The NAT process on Cisco Adaptive Security Appliances (ASA) devices allows remote attackers to cause a denial of service (connections-table memory consumption) via crafted packets, aka Bug ID CSCue46386.

Stack-based buffer overflow in Cisco WebEx Recording Format (WRF) player T27 LD before SP32 EP16, T27 L10N before SP32_ORION111, and T28 before T28.8 allows remote attackers to execute arbitrary code via a crafted WRF file, aka Bug ID CSCuc27645.

The General Responder implementation in the IP Service Level Agreement (SLA) feature in Cisco IOS 15.2 and IOS XE 3.1.xS through 3.4.xS before 3.4.5S and 3.5.xS through 3.7.xS before 3.7.2S allows remote attackers to cause a denial of service (device reload) via crafted (1) IPv4 or (2) IPv6 IP SLA packets on UDP port 1167, aka Bug ID CSCuc72594.

Cisco Intrusion Prevention System (IPS) Software in ASA 5500-X IPS-SSP software modules before 7.1(7)sp1E4 allows remote attackers to cause a denial of service (Analysis Engine process hang or device reload) via fragmented (1) IPv4 or (2) IPv6 packets, aka Bug ID CSCue51272.

Buffer overflow in the Intelligent Platform Management Interface (IPMI) functionality in the Manager component in Cisco Unified Computing System (UCS) 1.0 and 1.1 before 1.1(1j) and 1.2 before 1.2(1b) allows remote attackers to execute arbitrary code via malformed data in a UDP packet, aka Bug ID CSCtd32371.

The IP stack in Cisco Intrusion Prevention System (IPS) Software in ASA 5500-X IPS-SSP software and hardware modules before 7.1(5)E4, IPS 4500 sensors before 7.1(6)E4, and IPS 4300 sensors before 7.1(5)E4 allows remote attackers to cause a denial of service (MainApp process hang) via malformed IPv4 packets, aka Bug ID CSCtx18596.

Buffer overflow in the SNMP implementation in Cisco NX-OS on Nexus 7000 devices 4.x and 5.x before 5.2(5) and 6.x before 6.1(1) and MDS 9000 devices 4.x and 5.x before 5.2(5) allows remote authenticated users to execute arbitrary code via a crafted SNMP request, aka Bug ID CSCtx54822.

Buffer overflow in Cisco WebEx Advanced Recording Format (ARF) player T27 LD before SP32 EP16, T27 L10N before SP32_ORION111, and T28 before T28.8 allows remote attackers to execute arbitrary code or cause a denial of service (memory corruption) via a crafted ARF file, aka Bug IDs CSCue74118, CSCub28371, CSCud23401, and CSCud31109.

Heap-based buffer overflow in ciscod.exe in the Cisco Security Service in Cisco AnyConnect Secure Mobility Client (aka AnyConnect VPN Client) allows local users to gain privileges via unspecified vectors, aka Bug ID CSCud14143.

Cisco Unified Communications Domain Manager allows remote attackers to cause a denial of service (CPU consumption) via a flood of malformed UDP packets, aka Bug ID CSCug47057.

Multiple buffer overflows in the (1) SNMP and (2) License Manager implementations in Cisco NX-OS on Nexus 7000 devices 4.x and 5.x before 5.2(5) and 6.x before 6.1(1) and MDS 9000 devices 4.x and 5.x before 5.2(5) allow remote authenticated users to execute arbitrary code via a crafted SNMP request, aka Bug ID CSCtx54830.

Array index error in the Virtual Ethernet Module (VEM) kernel driver for VMware ESXi in Cisco NX-OS on the Nexus 1000V, when STUN debugging is enabled, allows remote attackers to cause a denial of service (ESXi crash and purple screen of death) by sending crafted STUN packets to a VEM, aka Bug ID CSCud14825.

A vulnerability in Cisco SD-WAN Solution Software could allow an unauthenticated, remote attacker to cause a buffer overflow on an affected device. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by sending crafted traffic to an affected device. A successful exploit could allow the attacker to gain access to information that they are not authorized to access, make changes to the system that they are not authorized to make, and execute commands on an affected system with privileges of the root user.

The Simple Network Management Protocol (SNMP) subsystem of Cisco IOS and IOS XE Software contains multiple vulnerabilities that could allow an authenticated, remote attacker to remotely execute code on an affected system or cause an affected system to reload. An attacker could exploit these vulnerabilities by sending a crafted SNMP packet to an affected system via IPv4 or IPv6. Only traffic directed to an affected system can be used to exploit these vulnerabilities. The vulnerabilities are due to a buffer overflow condition in the SNMP subsystem of the affected software. The vulnerabilities affect all versions of SNMP - Versions 1, 2c, and 3. To exploit these vulnerabilities via SNMP Version 2c or earlier, the attacker must know the SNMP read-only community string for the affected system. To exploit these vulnerabilities via SNMP Version 3, the attacker must have user credentials for the affected system. A successful exploit could allow the attacker to execute arbitrary code and obtain full control of the affected system or cause the affected system to reload. Customers are advised to apply the workaround as contained in the Workarounds section below. Fixed software information is available via the Cisco IOS Software Checker. All devices that have enabled SNMP and have not explicitly excluded the affected MIBs or OIDs should be considered vulnerable. There are workarounds that address these vulnerabilities.

The Simple Network Management Protocol (SNMP) subsystem of Cisco IOS and IOS XE Software contains multiple vulnerabilities that could allow an authenticated, remote attacker to remotely execute code on an affected system or cause an affected system to reload. An attacker could exploit these vulnerabilities by sending a crafted SNMP packet to an affected system via IPv4 or IPv6. Only traffic directed to an affected system can be used to exploit these vulnerabilities. The vulnerabilities are due to a buffer overflow condition in the SNMP subsystem of the affected software. The vulnerabilities affect all versions of SNMP - Versions 1, 2c, and 3. To exploit these vulnerabilities via SNMP Version 2c or earlier, the attacker must know the SNMP read-only community string for the affected system. To exploit these vulnerabilities via SNMP Version 3, the attacker must have user credentials for the affected system. A successful exploit could allow the attacker to execute arbitrary code and obtain full control of the affected system or cause the affected system to reload. Customers are advised to apply the workaround as contained in the Workarounds section below. Fixed software information is available via the Cisco IOS Software Checker. All devices that have enabled SNMP and have not explicitly excluded the affected MIBs or OIDs should be considered vulnerable. There are workarounds that address these vulnerabilities.

The Simple Network Management Protocol (SNMP) subsystem of Cisco IOS and IOS XE Software contains multiple vulnerabilities that could allow an authenticated, remote attacker to remotely execute code on an affected system or cause an affected system to reload. An attacker could exploit these vulnerabilities by sending a crafted SNMP packet to an affected system via IPv4 or IPv6. Only traffic directed to an affected system can be used to exploit these vulnerabilities. The vulnerabilities are due to a buffer overflow condition in the SNMP subsystem of the affected software. The vulnerabilities affect all versions of SNMP - Versions 1, 2c, and 3. To exploit these vulnerabilities via SNMP Version 2c or earlier, the attacker must know the SNMP read-only community string for the affected system. To exploit these vulnerabilities via SNMP Version 3, the attacker must have user credentials for the affected system. A successful exploit could allow the attacker to execute arbitrary code and obtain full control of the affected system or cause the affected system to reload. Customers are advised to apply the workaround as contained in the Workarounds section below. Fixed software information is available via the Cisco IOS Software Checker. All devices that have enabled SNMP and have not explicitly excluded the affected MIBs or OIDs should be considered vulnerable. There are workarounds that address these vulnerabilities.

A vulnerability in the Fibre Channel over Ethernet (FCoE) protocol implementation in Cisco NX-OS Software could allow an unauthenticated, adjacent attacker to cause a denial of service (DoS) condition when an FCoE-related process unexpectedly reloads. This vulnerability affects Cisco NX-OS Software on the following Cisco devices when they are configured for FCoE: Multilayer Director Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches. More Information: CSCvc91729. Known Affected Releases: 8.3(0)CV(0.833). Known Fixed Releases: 8.3(0)ISH(0.62) 8.3(0)CV(0.944) 8.1(1) 8.1(0.8)S0 7.3(2)D1(0.47).

Buffer overflow in Cisco Unified MeetingPlace Web Conferencing before 7.1MR1 Patch 1, 8.0 before 8.0MR1 Patch 1, and 8.5 before 8.5MR3 allows remote attackers to cause a denial of service (daemon hang) via unspecified parameters in a POST request, aka Bug ID CSCua66341.

A vulnerability in the Secure Shell (SSH) subsystem of Cisco Small Business Managed Switches software could allow an authenticated, remote attacker to cause a reload of the affected switch, resulting in a denial of service (DoS) condition. The vulnerability is due to improper processing of SSH connections. An attacker could exploit this vulnerability by logging in to an affected switch via SSH and sending a malicious SSH message. This vulnerability affects the following Cisco products when SSH is enabled: Small Business 300 Series Managed Switches, Small Business 500 Series Stackable Managed Switches, 350 Series Managed Switches, 350X Series Stackable Managed Switches, 550X Series Stackable Managed Switches, ESW2 Series Advanced Switches. Cisco Bug IDs: CSCvb48377.

A vulnerability in SSL/TLS message handler for Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability exists because incoming SSL/TLS packets are not properly processed. An attacker could exploit this vulnerability by sending a crafted SSL/TLS packet to an affected device. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a DoS condition.

The Simple Network Management Protocol (SNMP) subsystem of Cisco IOS and IOS XE Software contains multiple vulnerabilities that could allow an authenticated, remote attacker to remotely execute code on an affected system or cause an affected system to reload. An attacker could exploit these vulnerabilities by sending a crafted SNMP packet to an affected system via IPv4 or IPv6. Only traffic directed to an affected system can be used to exploit these vulnerabilities. The vulnerabilities are due to a buffer overflow condition in the SNMP subsystem of the affected software. The vulnerabilities affect all versions of SNMP - Versions 1, 2c, and 3. To exploit these vulnerabilities via SNMP Version 2c or earlier, the attacker must know the SNMP read-only community string for the affected system. To exploit these vulnerabilities via SNMP Version 3, the attacker must have user credentials for the affected system. A successful exploit could allow the attacker to execute arbitrary code and obtain full control of the affected system or cause the affected system to reload. Customers are advised to apply the workaround as contained in the Workarounds section below. Fixed software information is available via the Cisco IOS Software Checker. All devices that have enabled SNMP and have not explicitly excluded the affected MIBs or OIDs should be considered vulnerable. There are workarounds that address these vulnerabilities.

A vulnerability in the SNMP implementation of could allow an authenticated, remote attacker to cause a reload of the affected system or to remotely execute code. An attacker could exploit this vulnerability by sending a crafted SNMP packet to the affected device.  The vulnerability is due to a buffer overflow in the affected code area. The vulnerability affects all versions of SNMP (versions 1, 2c, and 3). The attacker must know the SNMP read only community string (SNMP version 2c or earlier) or the user credentials (SNMPv3). An exploit could allow the attacker to execute arbitrary code and obtain full control of the system or to cause a reload of the affected system. Only traffic directed to the affected system can be used to exploit this vulnerability.

A vulnerability in the TCP throttling process of Cisco UCS C-Series Rack Servers 3.0(0.234) could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to insufficient rate-limiting protection. An attacker could exploit this vulnerability by sending a high rate of TCP SYN packets to a specific TCP listening port on an affected device. An exploit could allow the attacker to cause a specific TCP listening port to stop accepting new connections, resulting in a DoS condition. Cisco Bug IDs: CSCva65544.

The HTTP Profiler on the Cisco Aironet Access Point with software 15.2 and earlier does not properly manage buffers, which allows remote attackers to cause a denial of service (device reload) via crafted HTTP requests, aka Bug ID CSCuc62460.

Multiple buffer overflow vulnerabilities exist in the Cisco WebEx Network Recording Player for Advanced Recording Format (ARF) files. An attacker could exploit these vulnerabilities by providing a user with a malicious ARF file via email or URL and convincing the user to launch the file. Exploitation of these vulnerabilities could cause an affected player to crash and, in some cases, could allow arbitrary code execution on the system of a targeted user. The Cisco WebEx Network Recording Player is an application that is used to play back WebEx meeting recordings that have been recorded on the computer of an online meeting attendee. The player can be automatically installed when the user accesses a recording file that is hosted on a WebEx server. The following client builds are affected by this vulnerability: Cisco WebEx Business Suite (WBS29) client builds prior to T29.13.130, Cisco WebEx Business Suite (WBS30) client builds prior to T30.17, Cisco WebEx Business Suite (WBS31) client builds prior to T31.10. Cisco Bug IDs: CSCvc47758 CSCvc51227 CSCvc51242.

A vulnerability in the Control and Provisioning of Wireless Access Points (CAPWAP) Discovery Request parsing functionality of Cisco Wireless LAN Controllers could allow an unauthenticated, remote attacker to cause an affected device to restart unexpectedly, resulting in a denial of service (DoS) condition. The vulnerability is due to incomplete input validation of fields in CAPWAP Discovery Request packets by the affected device. An attacker could exploit this vulnerability by sending crafted CAPWAP Discovery Request packets to an affected device. A successful exploit could allow the attacker to cause the affected device to restart unexpectedly, resulting in a DoS condition. Cisco Bug IDs: CSCvb95842.

A vulnerability in the Access Network Query Protocol (ANQP) ingress frame processing functionality of Cisco Wireless LAN Controllers could allow an unauthenticated, Layer 2 RF-adjacent attacker to cause an affected device to restart unexpectedly, resulting in a denial of service (DoS) condition. The vulnerability is due to incomplete input validation of ANQP query frames by the affected device. An attacker could exploit this vulnerability by sending a malformed ANQP query frame to an affected device that is on an RF-adjacent network. A successful exploit could allow the attacker to cause the affected device to restart unexpectedly, resulting in a DoS condition. This vulnerability affects Cisco Wireless LAN Controllers that are running a vulnerable release of Cisco WLC Software and are configured to support Hotspot 2.0. Cisco Bug IDs: CSCve05779.

A "Cisco WebEx Network Recording Player Remote Code Execution Vulnerability" exists in Cisco WebEx Network Recording Player for Advanced Recording Format (ARF) and WebEx Recording Format (WRF) files. A remote attacker could exploit this by providing a user with a malicious ARF or WRF file via email or URL and convincing the user to launch the file. Exploitation of this could cause an affected player to crash and, in some cases, could allow arbitrary code execution on the system of a targeted user. Cisco Bug IDs: CSCvf38060, CSCvg54836, CSCvf38077, CSCvg54843, CSCvf38084, CSCvg54850.

A "Cisco WebEx Network Recording Player Remote Code Execution Vulnerability" exists in Cisco WebEx Network Recording Player for Advanced Recording Format (ARF) and WebEx Recording Format (WRF) files. A remote attacker could exploit this by providing a user with a malicious ARF or WRF file via email or URL and convincing the user to launch the file. Exploitation of this could cause an affected player to crash and, in some cases, could allow arbitrary code execution on the system of a targeted user. Cisco Bug IDs: CSCvf49650, CSCvg54853, CSCvg54856, CSCvf49697, CSCvg54861, CSCvf49707, CSCvg54867.

A "Cisco WebEx Network Recording Player Remote Code Execution Vulnerability" exists in Cisco WebEx Network Recording Player for Advanced Recording Format (ARF) and WebEx Recording Format (WRF) files. A remote attacker could exploit this by providing a user with a malicious ARF or WRF file via email or URL and convincing the user to launch the file. Exploitation of this could cause an affected player to crash and, in some cases, could allow arbitrary code execution on the system of a targeted user. Cisco Bug IDs: CSCvf57234, CSCvg54868, CSCvg54870.

Buffer overflow in the Cisco WebEx Recording Format (WRF) player T27 before LD SP32 EP10 and T28 before T28.4 allows remote attackers to execute arbitrary code via a crafted WRF file, aka Bug ID CSCtz72958.

MCServer in the Cisco Management Controller in Cisco Unified Computing System (UCS) allows local users to cause a denial of service (application crash) via invalid MCTools parameters, aka Bug ID CSCtg20734.

A "Cisco WebEx Network Recording Player Remote Code Execution Vulnerability" exists in Cisco WebEx Network Recording Player for Advanced Recording Format (ARF) and WebEx Recording Format (WRF) files. A remote attacker could exploit this by providing a user with a malicious ARF or WRF file via email or URL and convincing the user to launch the file. Exploitation of this could cause an affected player to crash and, in some cases, could allow arbitrary code execution on the system of a targeted user. Cisco Bug IDs: CSCve10584, CSCve10591, CSCve11503, CSCve10658, CSCve11507, CSCve10749, CSCve10744, CSCve11532, CSCve10762, CSCve10764, CSCve11538.

A Buffer Overflow vulnerability in Cisco WebEx Network Recording Player for Advanced Recording Format (.arf) files could allow an attacker to execute arbitrary code on a system. An attacker could exploit this vulnerability by providing a user with a malicious .arf file via email or URL and convincing the user to launch the file. Exploitation of this vulnerability could allow arbitrary code execution on the system of the targeted user. This vulnerability affects Cisco WebEx Business Suite meeting sites, Cisco WebEx Meetings sites, Cisco WebEx Meetings Server, and Cisco WebEx ARF players. Cisco Bug IDs: CSCve10729, CSCve10771, CSCve10779, CSCve11521, CSCve11543.

The DHCP relay subsystem of Cisco IOS 12.2 through 15.6 and Cisco IOS XE Software contains a vulnerability that could allow an unauthenticated, remote attacker to execute arbitrary code and gain full control of an affected system. The attacker could also cause an affected system to reload, resulting in a denial of service (DoS) condition. The vulnerability is due to a buffer overflow condition in the DHCP relay subsystem of the affected software. An attacker could exploit this vulnerability by sending a crafted DHCP Version 4 (DHCPv4) packet to an affected system. A successful exploit could allow the attacker to execute arbitrary code and gain full control of the affected system or cause the affected system to reload, resulting in a DoS condition. Cisco Bug IDs: CSCsm45390, CSCuw77959.

The SIP inspection engine on Cisco Adaptive Security Appliances (ASA) 5500 series devices, and the ASA Services Module (ASASM) in Cisco Catalyst 6500 series devices, with software 8.2 before 8.2(5.17), 8.3 before 8.3(2.28), 8.4 before 8.4(2.13), 8.5 before 8.5(1.4), and 8.6 before 8.6(1.5) allows remote attackers to cause a denial of service (device reload) via a crafted SIP media-update packet, aka Bug ID CSCtr63728.

The DMVPN tunnel implementation in Cisco IOS 15.2 allows remote attackers to cause a denial of service (persistent IKE state) via a large volume of hub-to-spoke traffic, aka Bug ID CSCtq39602.

Multiple buffer overflows in the administrative web interface in Cisco Unified Computing System (UCS) allow remote authenticated users to cause a denial of service (memory corruption and session termination) via long string values for unspecified parameters, aka Bug ID CSCtg20751.

A vulnerability in the gRPC code of Cisco IOS XR Software for Cisco Network Convergence System (NCS) 5500 Series Routers could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition when the emsd service stops. The vulnerability is due to the software's inability to process HTTP/2 packets. An attacker could exploit this vulnerability by sending a malformed HTTP/2 frame to the affected device. A successful exploit could allow the attacker to create a DoS condition when the emsd service stops. Cisco Bug IDs: CSCvb99388.

A vulnerability in the handling of list headers in Cisco cBR Series Converged Broadband Routers could allow an unauthenticated, remote attacker to cause the device to reload, resulting in a denial of service (DoS) condition. Cisco cBR-8 Converged Broadband Routers running vulnerable versions of Cisco IOS XE are affected. More Information: CSCux40637. Known Affected Releases: 15.5(3)S 15.6(1)S. Known Fixed Releases: 15.5(3)S2 15.6(1)S1 15.6(2)S 15.6(2)SP 16.4(1).

A vulnerability in the Simple Network Management Protocol (SNMP) subsystem of Cisco Wireless LAN Controllers could allow an authenticated, remote attacker to cause an affected device to restart, resulting in a denial of service (DoS) condition. The vulnerability is due to a memory leak that occurs on an affected device after the device fails to deallocate a buffer that is used when certain MIBs are polled. An attacker who knows the SNMP Version 2 SNMP Read string or has valid SNMP Version 3 credentials for an affected device could repeatedly poll the affected MIB object IDs (OIDs) and consume available memory on the device. When memory is sufficiently depleted on the device, the device will restart, resulting in a DoS condition. Cisco Bug IDs: CSCvc71674.

A vulnerability in the Independent Computing Architecture (ICA) accelerator feature for the Cisco Wide Area Application Services (WAAS) could allow an unauthenticated, remote attacker to cause an ICA application optimization-related process to restart, resulting in a partial denial of service (DoS) condition. The vulnerability is due to improperly aborting a connection when an unexpected protocol packet is received. An attacker could exploit this vulnerability by sending a crafted ICA traffic through the targeted device. A successful exploit could allow the attacker to cause a DoS condition that is due to a process unexpectedly restarting. The Cisco WAAS could drop ICA traffic while the process is restarting. This vulnerability affects Cisco Wide Area Application Services (WAAS) and Cisco Virtual Wide Area Application Services (vWAAS). Cisco Bug IDs: CSCve74457.