The web framework on Cisco Unified IP 9900 phones with firmware 9.4(.1) and earlier allows remote attackers to upload files to arbitrary locations on a phone's filesystem via crafted HTTP requests, aka Bug ID CSCup90424.

Cisco IOS before 15.0(1)XA1, when certain TFTP debugging is enabled, allows remote attackers to cause a denial of service (device crash) via a TFTP copy over IPv6, aka Bug ID CSCtb28877.

Cisco Adaptive Security Appliances (ASA) 5500 series devices with software before 8.2(3) do not properly handle Online Certificate Status Protocol (OCSP) connection failures, which allows remote OCSP responders to cause a denial of service (TCP socket exhaustion) by rejecting connection attempts, aka Bug ID CSCsz36816.

The administrator web interface in Cisco TelePresence Video Communication Server (VCS) X8.5.2 allows remote authenticated users to execute arbitrary OS commands via crafted HTTP requests, aka Bug ID CSCuv11796.

Cisco IOS 15.1(2)T allows remote attackers to cause a denial of service (resource consumption and TCP outage) via spoofed TCP packets, related to embryonic TCP connections that remain in the SYN_RCVD or SYN_SENT state, aka Bug ID CSCti18193.

The Presence Engine (PE) service in Cisco Unified Presence 6.x before 6.0(7) and 7.x before 7.0(8) does not properly handle an erroneous Contact field in the header of a SIP SUBSCRIBE message, which allows remote attackers to cause a denial of service (process failure) via a malformed message, aka Bug ID CSCtd39629.

Unspecified vulnerability in the SunRPC inspection feature on the Cisco Firewall Services Module (FWSM) with software 3.1 before 3.1(17.2), 3.2 before 3.2(16.1), 4.0 before 4.0(10.1), and 4.1 before 4.1(1.1) for Catalyst 6500 series switches and 7600 series routers allows remote attackers to cause a denial of service (device reload) via crafted SunRPC messages, aka Bug ID CSCte61622.

The auto-update implementation in Cisco Adaptive Security Appliance (ASA) Software 9.0.3.6 and earlier allows remote attackers to cause a denial of service (device reload) via crafted update data, aka Bug ID CSCui33308.

The Cisco Content Services Switch (CSS) 11500 with software 8.20.4.02 and the Application Control Engine (ACE) 4710 with software A2(3.0) do not properly handle LF header terminators in situations where the GET line is terminated by CRLF, which allows remote attackers to conduct HTTP request smuggling attacks and possibly bypass intended header insertions via crafted header data, as demonstrated by an LF character between the ClientCert-Subject and ClientCert-Subject-CN headers. NOTE: this vulnerability exists because of an incomplete fix for CVE-2010-1576.

The SIP implementation on the Cisco PGW 2200 Softswitch with software 9.7(3)S before 9.7(3)S9 and 9.7(3)P before 9.7(3)P9 allows remote attackers to cause a denial of service (device crash) via a malformed header, aka Bug ID CSCsk04588.

The SIP implementation on the Cisco PGW 2200 Softswitch with software 9.7(3)S before 9.7(3)S9 and 9.7(3)P before 9.7(3)P9 allows remote attackers to cause a denial of service (device crash) via a malformed Contact header, aka Bug ID CSCsj98521.

The Cisco Content Services Switch (CSS) 11500 with software before 8.20.4.02 and the Application Control Engine (ACE) 4710 with software before A2(3.0) do not properly handle use of LF, CR, and LFCR as alternatives to the standard CRLF sequence between HTTP headers, which allows remote attackers to bypass intended header insertions or conduct HTTP request smuggling attacks via crafted header data, as demonstrated by LF characters preceding ClientCert-Subject and ClientCert-Subject-CN headers, aka Bug ID CSCta04885.

The SIP implementation on the Cisco PGW 2200 Softswitch with software 9.7(3)S before 9.7(3)S11 and 9.7(3)P before 9.7(3)P11 allows remote attackers to cause a denial of service (device crash) via a long message, aka Bug ID CSCsk44115.

The SIP implementation on the Cisco PGW 2200 Softswitch with software before 9.8(1)S5 allows remote attackers to cause a denial of service (device crash) via a malformed header, aka Bug ID CSCsz13590.

Cisco TFTP Server 1.1 allows remote attackers to cause a denial of service (daemon crash) via a crafted (1) read (aka RRQ) or (2) write (aka WRQ) request, or other TFTP packet. NOTE: some of these details are obtained from third party information.

Cisco Adaptive Security Appliances (ASA) 5580 series devices with software before 8.1(2) allow remote attackers to cause a denial of service (IKE process hang) via malformed NAT-T packets, aka Bug ID CSCsr74439.

The SIP implementation on the Cisco PGW 2200 Softswitch with software before 9.7(3)S11 allows remote attackers to cause a denial of service (device crash) via a malformed packet, aka Bug ID CSCsk32606.

A vulnerability in the egress packet processing functionality of the Cisco StarOS operating system for Cisco Aggregation Services Router (ASR) 5700 Series devices and Virtualized Packet Core (VPC) System Software could allow an unauthenticated, remote attacker to cause an interface on the device to cease forwarding packets. The device may need to be manually reloaded to clear this Interface Forwarding Denial of Service condition. The vulnerability is due to the failure to properly check that the length of a packet to transmit does not exceed the maximum supported length of the network interface card (NIC). An attacker could exploit this vulnerability by sending a crafted IP packet or a series of crafted IP fragments through an interface on the targeted device. A successful exploit could allow the attacker to cause the network interface to cease forwarding packets. This vulnerability could be triggered by either IPv4 or IPv6 network traffic. This vulnerability affects the following Cisco products when they are running the StarOS operating system and a virtual interface card is installed on the device: Aggregation Services Router (ASR) 5700 Series, Virtualized Packet Core-Distributed Instance (VPC-DI) System Software, Virtualized Packet Core-Single Instance (VPC-SI) System Software. Cisco Bug IDs: CSCvf32385.

Cisco IOS before 15.0(1)XA does not properly handle IRC traffic during a specific time period after an initial reload, which allows remote attackers to cause a denial of service (device reload) via an attempted connection to a certain IRC server, related to a "corrupted magic value," aka Bug ID CSCso05336.

A vulnerability in the Link Layer Discovery Protocol (LLDP) implementation for Cisco FXOS Software and Cisco NX-OS Software could allow an unauthenticated, adjacent attacker to cause a denial of service (DoS) condition when the device unexpectedly reloads. The vulnerability is due to improper input validation of certain type, length, value (TLV) fields of the LLDP frame header. An attacker could exploit this vulnerability by sending a crafted LLDP packet to an interface on the targeted device. A successful exploit could allow the attacker to cause the switch to reload unexpectedly.

A vulnerability in the web interface of the Cisco Adaptive Security Appliance (ASA) could allow an unauthenticated, remote attacker to cause an affected device to reload unexpectedly, resulting in a denial of service (DoS) condition. It is also possible on certain software releases that the ASA will not reload, but an attacker could view sensitive system information without authentication by using directory traversal techniques. The vulnerability is due to lack of proper input validation of the HTTP URL. An attacker could exploit this vulnerability by sending a crafted HTTP request to an affected device. An exploit could allow the attacker to cause a DoS condition or unauthenticated disclosure of information. This vulnerability applies to IPv4 and IPv6 HTTP traffic. This vulnerability affects Cisco ASA Software and Cisco Firepower Threat Defense (FTD) Software that is running on the following Cisco products: 3000 Series Industrial Security Appliance (ISA), ASA 1000V Cloud Firewall, ASA 5500 Series Adaptive Security Appliances, ASA 5500-X Series Next-Generation Firewalls, ASA Services Module for Cisco Catalyst 6500 Series Switches and Cisco 7600 Series Routers, Adaptive Security Virtual Appliance (ASAv), Firepower 2100 Series Security Appliance, Firepower 4100 Series Security Appliance, Firepower 9300 ASA Security Module, FTD Virtual (FTDv). Cisco Bug IDs: CSCvi16029.

Cisco IOS XR 5.1 and earlier allows remote attackers to cause a denial of service (process reload) via a malformed RSVP packet, aka Bug ID CSCuq12031.

A vulnerability in the web-based management interface of Cisco Identity Services Engine (ISE) could allow an authenticated, remote attacker to read and delete files on an affected device. This vulnerability is due to insufficient validation of user-supplied input. An attacker could exploit this vulnerability by sending a crafted HTTP request that contains certain character sequences to an affected system. A successful exploit could allow the attacker to read or delete specific files on the device that their configured administrative level should not have access to. Cisco plans to release software updates that address this vulnerability.

A vulnerability in the Simple Network Management Protocol (SNMP) feature of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an authenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by sending a crafted SNMP request to an affected device. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a DoS condition.

Cisco IOS XR 3.4.0 through 3.8.1 allows remote attackers to cause a denial of service (session reset) via a BGP UPDATE message with an invalid attribute, as demonstrated in the wild on 17 August 2009.

A vulnerability in the web UI of Cisco IOS XE Software could allow an authenticated, remote attacker to perform an injection attack against an affected device. This vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by sending crafted input to the web UI. A successful exploit could allow the attacker to execute arbitrary Cisco IOS XE Software CLI commands with level 15 privileges. Note: This vulnerability is exploitable only if the attacker obtains the credentials for a Lobby Ambassador account. This account is not configured by default.

A vulnerability in Cisco Secure Network Analytics could allow an authenticated, remote attacker to execute arbitrary code as a root user on an affected device. This vulnerability is due to insufficient validation of user input to the web interface. An attacker could exploit this vulnerability by uploading a crafted file to an affected device. A successful exploit could allow the attacker to execute code on the affected device. To exploit this vulnerability, an attacker would need to have valid Administrator credentials on the affected device.

Multiple vulnerabilities in the API of Cisco DNA Center Software could allow an authenticated, remote attacker to read information from a restricted container, enumerate user information, or execute arbitrary commands in a restricted container as the root user. For more information about these vulnerabilities, see the Details section of this advisory.

A vulnerability in the Intermediate System-to-Intermediate System (IS-IS) protocol of Cisco NX-OS Software for the Cisco Nexus 3000 Series Switches and Cisco Nexus 9000 Series Switches in standalone NX-OS mode could allow an unauthenticated, adjacent attacker to cause the IS-IS process to unexpectedly restart, which could cause an affected device to reload. This vulnerability is due to insufficient input validation when parsing an ingress IS-IS packet. An attacker could exploit this vulnerability by sending a crafted IS-IS packet to an affected device. A successful exploit could allow the attacker to cause a denial of service (DoS) condition due to the unexpected restart of the IS-IS process, which could cause the affected device to reload. Note: The IS-IS protocol is a routing protocol. To exploit this vulnerability, an attacker must be Layer 2 adjacent to the affected device.

A vulnerability in the web-based management interface of Cisco Small Business RV016, RV042, RV042G, RV082, RV320 and RV325 Routers could allow an authenticated, remote attacker to execute arbitrary commands on an affected device. This vulnerability is due to improper validation of user input within incoming HTTP packets. An attacker could exploit this vulnerability by sending a crafted HTTP request to the web-based management interface. A successful exploit could allow the attacker to gain root-level privileges and access unauthorized data. To exploit this vulnerability, an attacker would need to have valid administrative credentials on the affected device.

A vulnerability in the CLI of Cisco IOS XE SD-WAN Software could allow an authenticated, local attacker to execute arbitrary commands on the underlying operating system as the root user. The attacker must be authenticated on the affected device as a low-privileged user to exploit this vulnerability. This vulnerability is due to insufficient validation of user-supplied input. An attacker could exploit this vulnerability by injecting arbitrary commands to a file as a lower-privileged user. The commands are then executed on the device by the root user. A successful exploit could allow the attacker to execute arbitrary commands as the root user.

A vulnerability in the Internet Key Exchange Version 1 (IKEv1) XAUTH code of Cisco ASA Software could allow an authenticated, remote attacker to cause a reload of an affected system. The vulnerability is due to insufficient validation of the IKEv1 XAUTH parameters passed during an IKEv1 negotiation. An attacker could exploit this vulnerability by sending crafted parameters. Note: Only traffic directed to the affected system can be used to exploit this vulnerability. This vulnerability only affects systems configured in routed firewall mode and in single or multiple context mode. This vulnerability can be triggered by IPv4 or IPv6 traffic. A valid IKEv1 Phase 1 needs to be established to exploit this vulnerability, which means that an attacker would need to have knowledge of a pre-shared key or have a valid certificate for phase 1 authentication. This vulnerability affects Cisco ASA Software running on the following products: Cisco ASA 1000V Cloud Firewall, Cisco ASA 5500 Series Adaptive Security Appliances, Cisco ASA 5500-X Series Next-Generation Firewalls, Cisco ASA Services Module for Cisco Catalyst 6500 Series Switches and Cisco 7600 Series Routers, Cisco Adaptive Security Virtual Appliance (ASAv), Cisco ASA for Firepower 9300 Series, Cisco ISA 3000 Industrial Security Appliance. Fixed versions: 9.1(7.7) 9.2(4.11) 9.4(4) 9.5(3) 9.6(1.5). Cisco Bug IDs: CSCuz11685.

Multiple vulnerabilities in Cisco SD-WAN vManage Software could allow an unauthenticated, remote attacker to execute arbitrary code or allow an authenticated, local attacker to gain escalated privileges on an affected system. For more information about these vulnerabilities, see the Details section of this advisory.

A vulnerability in the interaction between the Server Message Block (SMB) protocol preprocessor and the Snort 3 detection engine for Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to bypass the configured policies or cause a denial of service (DoS) condition on an affected device. This vulnerability is due to improper error-checking when the Snort 3 detection engine is processing SMB traffic. An attacker could exploit this vulnerability by sending a crafted SMB packet stream through an affected device. A successful exploit could allow the attacker to cause the Snort process to reload, resulting in a DoS condition.

A vulnerability in the Web UI and administrative CLI of the Cisco Secure Email Gateway (ESA) and Cisco Secure Email and Web Manager (SMA) could allow an authenticated remote attacker and or authenticated local attacker to escalate their privilege level and gain root access. The attacker has to have a valid user credential with at least a [[privilege of operator - validate actual name]]. The vulnerability is due to the processing of a specially crafted SNMP configuration file. An attacker could exploit this vulnerability by authenticating to the targeted device and uploading a specially crafted SNMP configuration file that when uploaded could allow for the execution of commands as root. An exploit could allow the attacker to gain root access on the device.

A vulnerability in the file download feature of Cisco Firepower Management Center (FMC) Software could allow an authenticated, remote attacker to download arbitrary files from an affected system. This vulnerability is due to a lack of input sanitation. An attacker could exploit this vulnerability by sending a crafted HTTPS request. A successful exploit could allow the attacker to download arbitrary files from the affected system.

Multiple vulnerabilities in Cisco Identity Services Engine (ISE) could allow an authenticated attacker to delete or read arbitrary files on the underlying operating system. To exploit these vulnerabilities, an attacker must have valid credentials on an affected device. For more information about these vulnerabilities, see the Details section of this advisory.

A vulnerability in TACACS+ and RADIUS remote authentication for Cisco NX-OS Software could allow an unauthenticated, local attacker to cause an affected device to unexpectedly reload. This vulnerability is due to incorrect input validation when processing an authentication attempt if the directed request option is enabled for TACACS+ or RADIUS. An attacker could exploit this vulnerability by entering a crafted string at the login prompt of an affected device. A successful exploit could allow the attacker to cause the affected device to unexpectedly reload, resulting in a denial of service (DoS) condition.

A vulnerability in the change password functionality of Cisco Expressway Series and Cisco TelePresence Video Communication Server (VCS) could allow an authenticated, remote attacker with Read-only credentials to elevate privileges to Administrator on an affected system. This vulnerability is due to incorrect handling of password change requests. An attacker could exploit this vulnerability by authenticating to the application as a Read-only user and sending a crafted request to the web-based management interface. A successful exploit could allow the attacker to alter the passwords of any user on the system, including an administrative user, and then impersonate that user. Note: Cisco Expressway Series refers to the Expressway Control (Expressway-C) device and the Expressway Edge (Expressway-E) device.

A vulnerability in the web-based management interface of Cisco Small Business RV160 and RV260 Series VPN Routers could allow an authenticated, remote attacker to execute arbitrary commands on the underlying operating system of an affected device. This vulnerability is due to insufficient validation of user input. An attacker could exploit this vulnerability by sending a crafted request to the web-based management interface of an affected device. A successful exploit could allow the attacker to execute arbitrary commands using root-level privileges on the affected device. To exploit this vulnerability, the attacker must have valid Administrator-level credentials on the affected device.

A vulnerability in an API of the Web Bridge feature of Cisco Meeting Server could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition. This vulnerability is due to insufficient validation of HTTP requests. An attacker could exploit this vulnerability by sending crafted HTTP packets to an affected device. A successful exploit could allow the attacker to cause a partial availability condition, which could cause ongoing video calls to be dropped due to the invalid packets reaching the Web Bridge.

A vulnerability in the inter-device communication mechanisms between devices that are running Cisco Firepower Threat Defense (FTD) Software and devices that are running Cisco Firepower Management (FMC) Software could allow an authenticated, local attacker to execute arbitrary commands with root permissions on the underlying operating system of an affected device. This vulnerability is due to insufficient validation of user-supplied input. An attacker could exploit this vulnerability by accessing the expert mode of an affected device and submitting specific commands to a connected system. A successful exploit could allow the attacker to execute arbitrary code in the context of an FMC device if the attacker has administrative privileges on an associated FTD device. Alternatively, a successful exploit could allow the attacker to execute arbitrary code in the context of an FTD device if the attacker has administrative privileges on an associated FMC device.

Multiple vulnerabilities in Cisco Expressway Series and Cisco TelePresence Video Communication Server (VCS) could allow an authenticated attacker with Administrator-level read-only credentials to elevate their privileges to Administrator with read-write credentials on an affected system. Note: "Cisco Expressway Series" refers to Cisco Expressway Control (Expressway-C) devices and Cisco Expressway Edge (Expressway-E) devices. For more information about these vulnerabilities, see the Details section of this advisory.

A vulnerability in the web interface of the Cisco Registered Envelope Service could allow an unauthenticated, remote attacker to redirect a user to a undesired web page, aka an Open Redirect. This vulnerability affects the Cisco Registered Envelope cloud-based service. More Information: CSCvc60123. Known Affected Releases: 5.1.0-015.

A vulnerability in the Tomcat implementation for Cisco Unified Contact Center Express (Unified CCX) could allow an unauthenticated, remote attacker to cause a web cache poisoning attack on an affected device. This vulnerability is due to improper input validation of HTTP requests. An attacker could exploit this vulnerability by sending crafted HTTP requests to a specific API endpoint on the Unified CCX Finesse Portal. A successful exploit could allow the attacker to cause the internal WebProxy to redirect users to an attacker-controlled host.

Multiple vulnerabilities in the web interface of Cisco Webex Meetings could allow an authenticated, remote attacker to conduct a stored cross-site scripting (XSS) attack or upload arbitrary files as recordings. For more information about these vulnerabilities, see the Details section of this advisory.

Multiple vulnerabilities in the CLI of Cisco IOS XE SD-WAN Software could allow an authenticated, local attacker to access the underlying operating system with root privileges. These vulnerabilities are due to insufficient input validation of certain CLI commands. An attacker could exploit these vulnerabilities by authenticating to the device and submitting crafted input to the CLI. The attacker must be authenticated as an administrative user to execute the affected commands. A successful exploit could allow the attacker to access the underlying operating system with root privileges.

Multiple vulnerabilities in Cisco Identity Services Engine (ISE) could allow an authenticated attacker to delete or read arbitrary files on the underlying operating system. To exploit these vulnerabilities, an attacker must have valid credentials on an affected device. For more information about these vulnerabilities, see the Details section of this advisory.