Multiple vulnerabilities in the CLI of Cisco Firepower Threat Defense (FTD) Software could allow an authenticated, local attacker to execute arbitrary commands with root privileges. For more information about these vulnerabilities, see the Details section of this advisory.

A vulnerability in the CLI of Cisco SD-WAN Software could allow an authenticated, local attacker to inject arbitrary commands to be executed with Administrator privileges on the underlying operating system. This vulnerability is due to insufficient input validation on certain CLI commands. An attacker could exploit this vulnerability by authenticating to the device and submitting crafted input to the CLI. The attacker must be authenticated as a low-privileged user to execute the affected commands. A successful exploit could allow the attacker to execute commands with Administrator privileges.

Multiple vulnerabilities in Cisco SD-WAN products could allow an authenticated attacker to perform command injection attacks against an affected device, which could allow the attacker to take certain actions with root privileges on the device. For more information about these vulnerabilities, see the Details section of this advisory.

Multiple vulnerabilities in Cisco SD-WAN products could allow an authenticated attacker to perform command injection attacks against an affected device, which could allow the attacker to take certain actions with root privileges on the device. For more information about these vulnerabilities, see the Details section of this advisory.

Multiple vulnerabilities in Cisco SD-WAN products could allow an authenticated attacker to perform command injection attacks against an affected device, which could allow the attacker to take certain actions with root privileges on the device. For more information about these vulnerabilities, see the Details section of this advisory.

A vulnerability in the CLI of Cisco IOS XE SD-WAN Software could allow an authenticated, local attacker to inject arbitrary commands to be executed with root privileges on the underlying operating system. This vulnerability is due to insufficient input validation on certain CLI commands. An attacker could exploit this vulnerability by authenticating to the device and submitting crafted input to the CLI. The attacker must be authenticated as an administrative user to execute the affected commands. A successful exploit could allow the attacker to execute commands with root privileges.

Multiple vulnerabilities in the CLI of Cisco IOS XE SD-WAN Software could allow an authenticated, local attacker to access the underlying operating system with root privileges. These vulnerabilities are due to insufficient input validation of certain CLI commands. An attacker could exploit these vulnerabilities by authenticating to the device and submitting crafted input to the CLI. The attacker must be authenticated as an administrative user to execute the affected commands. A successful exploit could allow the attacker to access the underlying operating system with root privileges.

A vulnerability in Cisco SD-WAN Solution Software could allow an authenticated, local attacker to elevate privileges to Administrator on the underlying operating system. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by sending a crafted request to an affected system. A successful exploit could allow the attacker to gain administrative privileges.

A vulnerability in the application-hosting subsystem of Cisco IOS XE Software could allow an authenticated, local attacker to elevate privileges to root on an affected device. The attacker could execute IOS XE commands outside the application-hosting subsystem Docker container as well as on the underlying Linux operating system. These commands could be run as the root user. The vulnerability is due to a combination of two factors: (a) incomplete input validation of the user payload of CLI commands, and (b) improper role-based access control (RBAC) when commands are issued at the command line within the application-hosting subsystem. An attacker could exploit this vulnerability by using a CLI command with crafted user input. A successful exploit could allow the lower-privileged attacker to execute arbitrary CLI commands with root privileges. The attacker would need valid user credentials to exploit this vulnerability.

Cisco Unified Computing System (UCS) Platform Emulator 2.5(2)TS4, 3.0(2c)A, and 3.0(2c)TS9 allows local users to gain privileges via crafted arguments on a ucspe-copy command line, aka Bug ID CSCux68832.

The Cisco PIX/ASA Finesse Operation System 7.1 and 7.2 allows local users to gain privileges by entering characters at the enable prompt, erasing these characters via the Backspace key, and then holding down the Backspace key for one second after erasing the final character. NOTE: third parties, including one who works for the vendor, have been unable to reproduce the flaw unless the enable password is blank

Cisco Secure Services Client (CSSC) 4.x, Trust Agent 1.x and 2.x, Cisco Security Agent (CSA) 5.0 and 5.1 (when a vulnerable Trust Agent has been deployed), and the Meetinghouse AEGIS SecureConnect Client do not properly parse commands, which allows local users to gain privileges via unspecified vectors, aka CSCsh30624.

Multiple vulnerabilities in the Cisco IOx application hosting environment on multiple Cisco platforms could allow an attacker to inject arbitrary commands into the underlying host operating system, execute arbitrary code on the underlying host operating system, install applications without being authenticated, or conduct a cross-site scripting (XSS) attack against a user of the affected software. For more information about these vulnerabilities, see the Details section of this advisory.

A vulnerability in the Meraki onboarding feature of Cisco IOS XE Software could allow an authenticated, local attacker to gain root level privileges on an affected device. This vulnerability is due to insufficient memory protection in the Meraki onboarding feature of an affected device. An attacker could exploit this vulnerability by modifying the Meraki registration parameters. A successful exploit could allow the attacker to elevate privileges to root.

A vulnerability in the CLI of Cisco ThousandEyes Enterprise Agent, Virtual Appliance installation type, could allow an authenticated, local attacker to elevate privileges to root on an affected device. This vulnerability is due to insufficient input validation of user-supplied CLI arguments. An attacker could exploit this vulnerability by authenticating to an affected device and using crafted commands at the prompt. A successful exploit could allow the attacker to execute arbitrary commands as root. The attacker must have valid credentials on the affected device.

A vulnerability in the installer script of Cisco AppDynamics PHP Agent could allow an authenticated, local attacker to elevate privileges on an affected device. This vulnerability is due to insufficient permissions that are set by the PHP Agent Installer on the PHP Agent install directory. An attacker could exploit this vulnerability by modifying objects in the PHP Agent install directory, which would run with the same privileges as PHP. A successful exploit could allow a lower-privileged attacker to elevate their privileges to root on an affected device.

A vulnerability in the privilege management functionality of all Cisco BroadWorks server types could allow an authenticated, local attacker to elevate privileges to root on an affected system. This vulnerability is due to incorrect implementation of user role permissions. An attacker could exploit this vulnerability by authenticating to the application as a user with the BWORKS or BWSUPERADMIN role and issuing crafted commands on an affected system. A successful exploit could allow the attacker to execute commands beyond the sphere of their intended access level, including initiating installs or running operating system commands with elevated permissions. There are workarounds that address this vulnerability.

A vulnerability in the client update process of Cisco AnyConnect Secure Mobility Client Software for Windows and Cisco Secure Client Software for Windows could allow a low-privileged, authenticated, local attacker to elevate privileges to those of SYSTEM. The client update process is executed after a successful VPN connection is established. This vulnerability exists because improper permissions are assigned to a temporary directory that is created during the update process. An attacker could exploit this vulnerability by abusing a specific function of the Windows installer process. A successful exploit could allow the attacker to execute code with SYSTEM privileges.

A vulnerability in the CLI of Cisco NX-OS Software could allow an authenticated, local attacker to execute arbitrary commands on the underlying operating system of an affected device. This vulnerability is due to insufficient validation of arguments that are passed to specific CLI commands. An attacker could exploit this vulnerability by including crafted input as the argument of an affected command. A successful exploit could allow the attacker to execute arbitrary commands on the underlying operating system with the privileges of the currently logged-in user.

A vulnerability in the iPXE boot function of Cisco IOS XR software could allow an authenticated, local attacker to install an unverified software image on an affected device. This vulnerability is due to insufficient image verification. An attacker could exploit this vulnerability by manipulating the boot parameters for image verification during the iPXE boot process on an affected device. A successful exploit could allow the attacker to boot an unverified software image on the affected device.

A vulnerability in the Cisco IOx application hosting subsystem of Cisco IOS XE Software could allow an authenticated, local attacker to elevate privileges to root on an affected device. This vulnerability is due to insufficient restrictions on the hosted application. An attacker could exploit this vulnerability by logging in to and then escaping the Cisco IOx application container. A successful exploit could allow the attacker to execute arbitrary commands on the underlying operating system with root privileges.

A vulnerability in the CLI of Cisco IOS XE SD-WAN Software could allow an authenticated, local attacker to execute arbitrary commands with elevated privileges. This vulnerability is due to insufficient input validation by the system CLI. An attacker with privileges to run commands could exploit this vulnerability by first authenticating to an affected device using either local terminal access or a management shell interface and then submitting crafted input to the system CLI. A successful exploit could allow the attacker to execute commands on the underlying operating system with root-level privileges. An attacker with limited user privileges could use this vulnerability to gain complete control over the system. Note: For additional information about specific impacts, see the Details section of this advisory.

Multiple vulnerabilities that affect Cisco Catalyst Digital Building Series Switches and Cisco Catalyst Micro Switches could allow an attacker to execute persistent code at boot time or to permanently prevent the device from booting, resulting in a permanent denial of service (DoS) condition. For more information about these vulnerabilities, see the Details section of this advisory.

A vulnerability in the Common Execution Environment (CEE) ConfD CLI of Cisco Ultra Cloud Core - Subscriber Microservices Infrastructure (SMI) software could allow an authenticated, local attacker to escalate privileges on an affected device. This vulnerability is due to insufficient access control in the affected CLI. An attacker could exploit this vulnerability by authenticating as a CEE ConfD CLI user and executing a specific CLI command. A successful exploit could allow an attacker to access privileged containers with root privileges.

Multiple vulnerabilities in Cisco Small Business RV160, RV260, RV340, and RV345 Series Routers could allow an attacker to do any of the following: Execute arbitrary code Elevate privileges Execute arbitrary commands Bypass authentication and authorization protections Fetch and run unsigned software Cause denial of service (DoS) For more information about these vulnerabilities, see the Details section of this advisory.

Unspecified vulnerability in the VPN Client for Windows Graphical User Interface (GUI) (aka the VPN client dialer) in Cisco VPN Client for Windows 4.8.00.* and earlier, except for 4.7.00.0533, allows local authenticated, interactive users to gain privileges, possibly due to privileges of dialog boxes, aka bug ID CSCsd79265.

Multiple vulnerabilities in the Cisco IOx application hosting environment on multiple Cisco platforms could allow an attacker to inject arbitrary commands into the underlying host operating system, execute arbitrary code on the underlying host operating system, install applications without being authenticated, or conduct a cross-site scripting (XSS) attack against a user of the affected software. For more information about these vulnerabilities, see the Details section of this advisory.

dne2000.sys in Citrix Deterministic Network Enhancer (DNE) 2.21.7.233 through 3.21.7.17464, as used in (1) Cisco VPN Client, (2) Blue Coat WinProxy, and (3) SafeNet SoftRemote and HighAssurance Remote, allows local users to gain privileges via a crafted DNE_IOCTL DeviceIoControl request to the \\.\DNE device interface.

A vulnerability in Cisco Umbrella Insights Virtual Appliances 2.1.0 and earlier could allow an authenticated, local attacker to log in to an affected virtual appliance with root privileges. The vulnerability is due to the presence of default, static user credentials for an affected virtual appliance. An attacker could exploit this vulnerability by using the hypervisor console to connect locally to an affected system and then using the static credentials to log in to an affected virtual appliance. A successful exploit could allow the attacker to log in to the affected appliance with root privileges. Cisco Bug IDs: CSCvg31220.

A vulnerability in the restricted shell of the Cisco Identity Services Engine (ISE) that is accessible via SSH could allow an authenticated, local attacker to run arbitrary CLI commands with elevated privileges. The vulnerability is due to incomplete input validation of the user input for CLI commands issued at the restricted shell. An attacker could exploit this vulnerability by authenticating to the targeted device and executing commands that could lead to elevated privileges. An attacker would need valid user credentials to the device to exploit this vulnerability. The vulnerability affects the following Cisco Identity Services Engine (ISE) products running Release 1.4, 2.0, 2.0.1, 2.1.0: ISE, ISE Express, ISE Virtual Appliance. Cisco Bug IDs: CSCve74916.

A vulnerability in Cisco NX-OS System Software could allow an authenticated, local attacker to bypass signature verification when loading a software patch. The vulnerability is due to insufficient NX-OS signature verification for software patches. An authenticated, local attacker could exploit this vulnerability to bypass signature verification and load a crafted, unsigned software patch on a targeted device. The attacker would need valid administrator credentials to perform this exploit. This vulnerability affects the following products running Cisco NX-OS System Software: Multilayer Director Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Unified Computing System Manager. Cisco Bug IDs: CSCvf16494, CSCvf23655.

A vulnerability in the Cisco Unified Computing System (UCS) Manager, Cisco Firepower 4100 Series Next-Generation Firewall (NGFW), and Cisco Firepower 9300 Security Appliance could allow an authenticated, local attacker to obtain root shell privileges on the device, aka Command Injection. The vulnerability is due to improper validation of string input in the shell application. An attacker could exploit this vulnerability through the use of malicious commands. A successful exploit could allow the attacker to obtain root shell privileges on the device. Cisco Bug IDs: CSCvf20741, CSCvf60078.

A vulnerability in the Cisco FindIT Network Discovery Utility could allow an authenticated, local attacker to perform a DLL preloading attack, potentially causing a partial impact to the device availability, confidentiality, and integrity, aka Insecure Library Loading. The vulnerability is due to the application loading a malicious copy of a specific, nondefined DLL file instead of the DLL file it was expecting. An attacker could exploit this vulnerability by placing an affected DLL within the search path of the host system. An exploit could allow the attacker to load a malicious DLL file into the system, thus partially compromising confidentiality, integrity, and availability on the device. Cisco Bug IDs: CSCvf37955.

A vulnerability in Cisco SD-WAN Solution software could allow an authenticated, local attacker to elevate privileges to root on the underlying operating system. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by sending a crafted request to an affected system. A successful exploit could allow the attacker to gain root-level privileges.

A vulnerability in the local management (local-mgmt) CLI of Cisco FXOS Software and Cisco UCS Manager Software could allow an authenticated, local attacker to execute arbitrary commands on the underlying operating system (OS) of an affected device. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by including crafted arguments to specific commands. A successful exploit could allow the attacker to execute arbitrary commands on the underlying OS with the privileges of the currently logged-in user for all affected platforms excluding Cisco UCS 6400 Series Fabric Interconnects. On Cisco UCS 6400 Series Fabric Interconnects, the injected commands are executed with root privileges.

A vulnerability in the CLI command parser of the Cisco Mobility Express 2800 and 3800 Series Wireless LAN Controllers could allow an authenticated, local attacker to obtain access to the underlying operating system shell with root-level privileges. More Information: CSCvb70351. Known Affected Releases: 8.3(102.0).

Cisco Firepower Management Center 6.0.1 has hardcoded database credentials, which allows local users to obtain sensitive information by leveraging CLI access, aka Bug ID CSCva30370.

Cisco Content Services (CSS) switch products 11800 and earlier, aka Arrowpoint, allows local users to gain privileges by entering debug mode.

A vulnerability in the installation procedure of the Cisco Hybrid Media Service could allow an authenticated, local attacker to elevate privileges to the root level. More Information: CSCvb81344. Known Affected Releases: 1.0.

Cisco IOS XR 6.1.1 allows local users to execute arbitrary OS commands as root by leveraging admin privileges, aka Bug ID CSCva38349.

A vulnerability in the command-line interface of the Cisco IP Interoperability and Collaboration System (IPICS) could allow an authenticated, local attacker to elevate the privilege level associated with their session. More Information: CSCva38636. Known Affected Releases: 4.10(1). Known Fixed Releases: 5.0(1).

Cisco Aironet 1800, 2800, and 3800 devices with software before 8.2.110.0, 8.2.12x before 8.2.121.0, and 8.3.x before 8.3.102.0 allow local users to gain privileges via crafted CLI parameters, aka Bug ID CSCuz24725.

iox in Cisco IOS, possibly 15.6 and earlier, and IOS XE, possibly 3.18 and earlier, allows local users to execute arbitrary IOx Linux commands on the guest OS via crafted iox command-line options, aka Bug ID CSCuz59223.

The installation procedure on Cisco Application Policy Infrastructure Controller (APIC) devices 1.3(2f) mishandles binary files, which allows local users to obtain root access via unspecified vectors, aka Bug ID CSCva50496.