Directory traversal vulnerability in ZZIPlib 0.13.69 allows attackers to overwrite arbitrary files via a .. (dot dot) in a zip file, because of the function unzzip_cat in the bins/unzzipcat-mem.c file.

An issue was discovered in Croc through 9.6.5. A sender can cause a receiver to overwrite files during ZIP extraction.

squashfs_opendir in unsquash-2.c in Squashfs-Tools 4.5 allows Directory Traversal, a different vulnerability than CVE-2021-40153. A squashfs filesystem that has been crafted to include a symbolic link and then contents under the same filename in a filesystem can cause unsquashfs to first create the symbolic link pointing outside the expected directory, and then the subsequent write operation will cause the unsquashfs process to write through the symbolic link elsewhere in the filesystem.

squashfs_opendir in unsquash-1.c in Squashfs-Tools 4.5 stores the filename in the directory entry; this is then used by unsquashfs to create the new file during the unsquash. The filename is not validated for traversal outside of the destination directory, and thus allows writing to locations outside of the destination.

The npm package "tar" (aka node-tar) before versions 6.1.2, 5.0.7, 4.4.15, and 3.2.3 has an arbitrary File Creation/Overwrite vulnerability via insufficient symlink protection. `node-tar` aims to guarantee that any file whose location would be modified by a symbolic link is not extracted. This is, in part, achieved by ensuring that extracted directories are not symlinks. Additionally, in order to prevent unnecessary `stat` calls to determine whether a given path is a directory, paths are cached when directories are created. This logic was insufficient when extracting tar files that contained both a directory and a symlink with the same name as the directory. This order of operations resulted in the directory being created and added to the `node-tar` directory cache. When a directory is present in the directory cache, subsequent calls to mkdir for that directory are skipped. However, this is also where `node-tar` checks for symlinks occur. By first creating a directory, and then replacing that directory with a symlink, it was thus possible to bypass `node-tar` symlink checks on directories, essentially allowing an untrusted tar file to symlink into an arbitrary location and subsequently extracting arbitrary files into that location, thus allowing arbitrary file creation and overwrite. This issue was addressed in releases 3.2.3, 4.4.15, 5.0.7 and 6.1.2.

hawtio 2.17.2 is vulnerable to Path Traversal. it is possible to input malicious zip files, which can result in the high-risk files after decompression being stored in any location, even leading to file overwrite.

Rasa X before 0.42.4 allows Directory Traversal during archive extraction. In the functionality that allows a user to load a trained model archive, an attacker has arbitrary write capability within specific directories via a crafted archive file.

The npm package "tar" (aka node-tar) before versions 6.1.1, 5.0.6, 4.4.14, and 3.3.2 has a arbitrary File Creation/Overwrite vulnerability due to insufficient absolute path sanitization. node-tar aims to prevent extraction of absolute file paths by turning absolute paths into relative paths when the `preservePaths` flag is not set to `true`. This is achieved by stripping the absolute path root from any absolute file paths contained in a tar file. For example `/home/user/.bashrc` would turn into `home/user/.bashrc`. This logic was insufficient when file paths contained repeated path roots such as `////home/user/.bashrc`. `node-tar` would only strip a single path root from such paths. When given an absolute file path with repeating path roots, the resulting path (e.g. `///home/user/.bashrc`) would still resolve to an absolute path, thus allowing arbitrary file creation and overwrite. This issue was addressed in releases 3.2.2, 4.4.14, 5.0.6 and 6.1.1. Users may work around this vulnerability without upgrading by creating a custom `onentry` method which sanitizes the `entry.path` or a `filter` method which removes entries with absolute paths. See referenced GitHub Advisory for details. Be aware of CVE-2021-32803 which fixes a similar bug in later versions of tar.

Rasa is an open source machine learning framework to automate text-and voice-based conversations. In affected versions a vulnerability exists in the functionality that loads a trained model `tar.gz` file which allows a malicious actor to craft a `model.tar.gz` file which can overwrite or replace bot files in the bot directory. The vulnerability is fixed in Rasa 2.8.10. For users unable to update ensure that users do not upload untrusted model files, and restrict CLI or API endpoint access where a malicious actor could target a deployed Rasa instance.

An issue was discovered in MetInfo 6.0.0. admin/app/batch/csvup.php allows remote attackers to delete arbitrary files via a flienamecsv=../ directory traversal. This can be exploited via CSRF.

zip4j before 1.3.3 is vulnerable to directory traversal, allowing attackers to write to arbitrary files via a ../ (dot dot slash) in a Zip archive entry that is mishandled during extraction. This vulnerability is also known as 'Zip-Slip'.

SharpZipLib before 1.0 RC1 is vulnerable to directory traversal, allowing attackers to write to arbitrary files via a ../ (dot dot slash) in a Zip archive entry that is mishandled during extraction. This vulnerability is also known as 'Zip-Slip'.

zt-zip before 1.13 is vulnerable to directory traversal, allowing attackers to write to arbitrary files via a ../ (dot dot slash) in a Zip archive entry that is mishandled during extraction. This vulnerability is also known as 'Zip-Slip'.

adm-zip npm library before 0.4.9 is vulnerable to directory traversal, allowing attackers to write to arbitrary files via a ../ (dot dot slash) in a Zip archive entry that is mishandled during extraction. This vulnerability is also known as 'Zip-Slip'.

DotNetZip.Semvered before 1.11.0 is vulnerable to directory traversal, allowing attackers to write to arbitrary files via a ../ (dot dot slash) in a Zip archive entry that is mishandled during extraction. This vulnerability is also known as 'Zip-Slip'.

Directory traversal vulnerability in ver.2.8.4.0 and earlier and ver.3.3.0.0 and earlier allows an attacker to create or overwrite existing files via specially crafted ATC file.

Directory traversal vulnerability in Lhaplus before 1.70 allows remote attackers to write to arbitrary files via a crafted archive.

Directory traversal vulnerability in CREAR AL-Mail32 before 1.13d allows remote attackers to write to arbitrary files via a crafted filename of an attachment.

bit7z is a cross-platform C++ static library that allows the compression/extraction of archive files. Prior to version 4.0.11, a path traversal vulnerability ("Zip Slip") exists in bit7z's archive extraction functionality. The library does not adequately validate file paths contained in archive entries, allowing files to be written outside the intended extraction directory through three distinct mechanisms: relative path traversal, absolute path traversal, and symbolic link traversal. An attacker can exploit this by providing a malicious archive to any application that uses bit7z to extract untrusted archives. Successful exploitation results in arbitrary file write with the privileges of the process performing the extraction. This could lead to overwriting of application binaries, configuration files, or other sensitive data. The vulnerability does not directly enable reading of file contents; the confidentiality impact is limited to the calling application's own behavior after extraction. However, applications that subsequently serve or display extracted files may face secondary confidentiality risks from attacker-created symlinks. Fixes have been released in version 4.0.11. If upgrading is not immediately possible, users can mitigate the vulnerability by validating each entry's destination path before writing. Other mitigations include running extraction with least privilege and extracting untrusted archives in a sandboxed directory.

Open-source ARJ archiver 3.10.22 does not properly remove leading slashes from paths, which allows remote attackers to conduct absolute path traversal attacks and write to arbitrary files via multiple leading slashes in a path in an ARJ archive.

Directory traversal vulnerability in Archive collectively operation utility Ver.2.10.1.0 and earlier allows an attacker to create or overwrite files by leading a user to expand a malicious ZIP archives.

A path handling issue was addressed with improved validation. This issue is fixed in macOS Sequoia 15.2, macOS Sonoma 14.7.2, macOS Ventura 13.7.2. An app may be able to overwrite arbitrary files.

A flaw was found in the Libreoffice package. An attacker can craft an odb containing a "database/script" file with a SCRIPT command where the contents of the file could be written to a new file whose location was determined by the attacker.

eml_parser serves as a python module for parsing eml files and returning various information found in the e-mail as well as computed information. Prior to version 2.0.1, the official example script examples/recursively_extract_attachments.py contains a path traversal vulnerability that allows arbitrary file write outside the intended output directory. Attachment filenames extracted from parsed emails are directly used to construct output file paths without any sanitization, allowing an attacker-controlled filename to escape the target directory. This issue has been patched in version 2.0.1.

A path traversal vulnerability affects jefferson's JFFS2 filesystem extractor. By crafting malicious JFFS2 files, attackers could force jefferson to write outside of the extraction directory.This issue affects jefferson: before 0.4.1.

A path traversal vulnerability affects yaffshiv YAFFS filesystem extractor. By crafting a malicious YAFFS file, an attacker could force yaffshiv to write outside of the extraction directory. This issue affects yaffshiv up to version 0.1 included, which is the most recent at time of publication.

ubireader_extract_files is vulnerable to path traversal when run against specifically crafted UBIFS files, allowing the attacker to overwrite files outside of the extraction directory (provided the process has write access to that file or directory). This is due to the fact that a node name (dent_node.name) is considered trusted and joined to the extraction directory path during processing, then the node content is written to that joined path. By crafting a malicious UBIFS file with node names holding path traversal payloads (e.g. ../../tmp/outside.txt), it's possible to force ubi_reader to write outside of the extraction directory. This issue affects ubi-reader before 0.8.5.

OpenClaw versions 2026.1.16-2 prior to 2026.2.14 contain a path traversal vulnerability in archive extraction during installation commands that allows arbitrary file writes outside the intended directory. Attackers can craft malicious archives that, when extracted via skills install, hooks install, plugins install, or signal install commands, write files to arbitrary locations enabling persistence or code execution.

Directory traversal vulnerability in the ES File Explorer File Manager application before 3.0.4 for Android allows remote attackers to overwrite or create arbitrary files via unspecified vectors.

A CWE-22 Improper Limitation of a Pathname to a Restricted Directory ('Path Transversal') vulnerability exists in SCADAPack 7x Remote Connect (V3.6.3.574 and prior) which allows an attacker to place content in any unprotected folder on the target system using a crafted .RCZ file.

A CWE-22: Improper Limitation of a Pathname to a Restricted Directory ('Path Traversal') vulnerability during zip file extraction exists in EcoStruxure Operator Terminal Expert 3.1 Service Pack 1 and prior (formerly known as Vijeo XD) which could cause unauthorized write access outside of expected path folder when opening the project file.

Directory traversal vulnerability in the apps4u@android SD Card Manager application before 20140224 for Android allows attackers to overwrite or create arbitrary files via a crafted filename.

Directory traversal vulnerability in the tetra filer application 2.3.1 and earlier for Android 4.0.3, tetra filer free application 2.3.1 and earlier for Android 4.0.3, tetra filer application 1.5.1 and earlier for Android before 4.0.3, and tetra filer free application 1.5.1 and earlier for Android before 4.0.3 allows attackers to overwrite or create arbitrary files via unspecified vectors.

Directory traversal vulnerability in the aokitaka ZIP with Pass application 4.5.7 and earlier, and ZIP with Pass Pro application 6.3.8 and earlier, for Android allows attackers to overwrite or create arbitrary files via unspecified vectors.

Directory traversal vulnerability in the NeoFiler application 5.4.3 and earlier, NeoFiler Free application 5.4.3 and earlier, and NeoFiler Lite application 2.4.2 and earlier for Android allows attackers to overwrite or create arbitrary files via unspecified vectors.

A vulnerability in the configuration restore feature of Cisco Nexus Data Broker software could allow an unauthenticated, remote attacker to perform a directory traversal attack on an affected device. The vulnerability is due to insufficient validation of configuration backup files. An attacker could exploit this vulnerability by persuading an administrator to restore a crafted configuration backup file. A successful exploit could allow the attacker to overwrite arbitrary files that are accessible through the affected software on an affected device.

Directory traversal vulnerability in the CGENE Security File Manager Pro application 1.0.6 and earlier, and Security File Manager Trial application 1.0.6 and earlier, for Android allows attackers to overwrite or create arbitrary files via unspecified vectors.

The SUPERGRIDLib.SuperGrid ActiveX control in SuperGrid.ocx before 65.30.30000.10002 in WellinTech KingView before 6.53 does not properly restrict ReplaceDBFile method calls, which allows remote attackers to create or overwrite arbitrary files, and subsequently execute arbitrary programs, via the two pathname arguments, as demonstrated by a directory traversal attack.

Multiple directory traversal vulnerabilities in the (1) tar_extract_glob and (2) tar_extract_all functions in libtar 1.2.20 and earlier allow remote attackers to overwrite arbitrary files via a .. (dot dot) in a crafted tar file.

Mate 9 smartphones with software MHA-AL00AC00B125 have a directory traversal vulnerability in Push module. Since the system does not verify the file name during decompression, system directories are traversed. It could be exploited to cause the attacker to replace files and impact the service.

malcontent discovers supply-chain compromises through. context, differential analysis, and YARA. Starting in version 1.8.0 and prior to version 1.20.3, malcontent could be made to create symlinks outside the intended extraction directory when scanning a specially crafted tar or deb archive. The `handleSymlink` function received arguments in the wrong order, causing the symlink target to be used as the symlink location. Additionally, symlink targets were not validated to ensure they resolved within the extraction directory. Version 1.20.3 introduces fixes that swap handleSymlink arguments, validate symlink location, and validate symlink targets that resolve within an extraction directory.

wheel is a command line tool for manipulating Python wheel files, as defined in PEP 427. In versions 0.40.0 through 0.46.1, the unpack function is vulnerable to file permission modification through mishandling of file permissions after extraction. The logic blindly trusts the filename from the archive header for the chmod operation, even though the extraction process itself might have sanitized the path. Attackers can craft a malicious wheel file that, when unpacked, changes the permissions of critical system files (e.g., /etc/passwd, SSH keys, config files), allowing for Privilege Escalation or arbitrary code execution by modifying now-writable scripts. This issue has been fixed in version 0.46.2.

A vulnerability was discovered in the filename parameter in pathindex.php?r=cms-backend/attachment/delete&sub=&filename=../../../../111.txt&filetype=image/jpeg of the master version of RKCMS. This vulnerability allows for an attacker to perform a directory traversal via a crafted .txt file.

A vulnerability in all versions of Kuba allows attackers to overwrite arbitrary files in arbitrary directories with crafted Zip files due to improper validation of file paths in .zip archives.

Directory traversal vulnerability in the web player in NeoAxis NeoAxis web player 1.4 and earlier allows user-assisted remote attackers to write arbitrary files via a .. (dot dot) in a filename in the neoaxis_web_application_win32.zip ZIP archive.

Directory traversal vulnerability in the Manager service in the management console in Symantec Endpoint Protection (SEP) 12.1 before 12.1 RU1-MP1 allows remote attackers to delete files via unspecified vectors.

A path validation issue in WhatsApp for iOS prior to v2.20.61 and WhatsApp Business for iOS prior to v2.20.61 could have allowed for directory traversal overwriting files when sending specially crafted docx, xlsx, and pptx files as attachments to messages.

A path handling issue was addressed with improved logic. This issue is fixed in Safari 26.3, iOS 18.7.5 and iPadOS 18.7.5, iOS 26.3 and iPadOS 26.3, macOS Sequoia 15.7.5, macOS Sonoma 14.8.4, macOS Tahoe 26.3, visionOS 26.3. A remote user may be able to write arbitrary files.

Huawei iReader app before 8.0.2.301 has a path traversal vulnerability due to insufficient validation on file storage paths. An attacker can exploit this vulnerability to store downloaded malicious files in an arbitrary directory.

This issue was addressed by removing the vulnerable code. This issue is fixed in iOS 18 and iPadOS 18, macOS Sequoia 15, macOS Sonoma 14.7, macOS Ventura 13.7, visionOS 2. An app may be able to overwrite arbitrary files.