runc through 1.1.4 has Incorrect Access Control leading to Escalation of Privileges, related to libcontainer/rootfs_linux.go. To exploit this, an attacker must be able to spawn two containers with custom volume-mount configurations, and be able to run custom images. NOTE: this issue exists because of a CVE-2019-19921 regression.

A vulnerability was found in all openshift/postgresql-apb 4.x.x versions prior to 4.3.0, where an insecure modification vulnerability in the /etc/passwd file was found in the container openshift/postgresql-apb. An attacker with access to the container could use this flaw to modify /etc/passwd and escalate their privileges.

libffi requests an executable stack allowing attackers to more easily trigger arbitrary code execution by overwriting the stack. Please note that libffi is used by a number of other libraries. It was previously stated that this affects libffi version 3.2.1 but this appears to be incorrect. libffi prior to version 3.1 on 32 bit x86 systems was vulnerable, and upstream is believed to have fixed this issue in version 3.1.

A use-after-free flaw was found in the Linux kernel’s mm/mremap memory address space accounting source code. This issue occurs due to a race condition between rmap walk and mremap, allowing a local user to crash the system or potentially escalate their privileges on the system.

A use-after-free vulnerability was found in usbredir in versions prior to 0.11.0 in the usbredirparser_serialize() in usbredirparser/usbredirparser.c. This issue occurs when serializing large amounts of buffered write data in the case of a slow or blocked destination.

A crafted JPEG image may lead the JPEG reader to underflow its data pointer, allowing user-controlled data to be written in heap. To a successful to be performed the attacker needs to perform some triage over the heap layout and craft an image with a malicious format and payload. This vulnerability can lead to data corruption and eventual code execution or secure boot circumvention. This flaw affects grub2 versions prior grub-2.12.

.A flaw was found in the CAN BCM networking protocol in the Linux kernel, where a local attacker can abuse a flaw in the CAN subsystem to corrupt memory, crash the system or escalate privileges. This race condition in net/can/bcm.c in the Linux kernel allows for local privilege escalation to root.

A crafted 16-bit grayscale PNG image may lead to a out-of-bounds write in the heap area. An attacker may take advantage of that to cause heap data corruption or eventually arbitrary code execution and circumvent secure boot protections. This issue has a high complexity to be exploited as an attacker needs to perform some triage over the heap layout to achieve signifcant results, also the values written into the memory are repeated three times in a row making difficult to produce valid payloads. This flaw affects grub2 versions prior grub-2.12.

An integer underflow issue exists in ntfs-3g 2017.3.23. A local attacker could potentially exploit this by running /bin/ntfs-3g with specially crafted arguments from a specially crafted directory to cause a heap buffer overflow, resulting in a crash or the ability to execute arbitrary code. In installations where /bin/ntfs-3g is a setuid-root binary, this could lead to a local escalation of privileges.

Uncontrolled search path in the QT Library before 5.14.0, 5.12.7 and 5.9.10 may allow an authenticated user to potentially enable elevation of privilege via local access.

The LiveUpdate capability (liveupdate.sh) in Symantec AntiVirus Scan Engine 4.0 and 4.3 for Red Hat Linux allows local users to create or append to arbitrary files via a symlink attack on /tmp/LiveUpdate.log.

Flatpak before 1.0.7, and 1.1.x and 1.2.x before 1.2.3, exposes /proc in the apply_extra script sandbox, which allows attackers to modify a host-side executable file.

A vulnerability was found in the Quay web application. Sessions in the Quay web application never expire. An attacker, able to gain access to a session, could use it to control or delete a user's container repository. Red Hat Quay 2 and 3 are vulnerable to this issue.

runc through 1.0.0-rc9 has Incorrect Access Control leading to Escalation of Privileges, related to libcontainer/rootfs_linux.go. To exploit this, an attacker must be able to spawn two containers with custom volume-mount configurations, and be able to run custom images. (This vulnerability does not affect Docker due to an implementation detail that happens to block the attack.)

In the Linux kernel before 5.2, a setxattr operation, after a mount of a crafted ext4 image, can cause a slab-out-of-bounds write access because of an ext4_xattr_set_entry use-after-free in fs/ext4/xattr.c when a large old_size value is used in a memset call, aka CID-345c0dbf3a30.

In PolicyKit (aka polkit) 0.115, the "start time" protection mechanism can be bypassed because fork() is not atomic, and therefore authorization decisions are improperly cached. This is related to lack of uid checking in polkitbackend/polkitbackendinteractiveauthority.c.

The fix for CVE-2019-11599, affecting the Linux kernel before 5.0.10 was not complete. A local user could use this flaw to obtain sensitive information, cause a denial of service, or possibly have other unspecified impacts by triggering a race condition with mmget_not_zero or get_task_mm calls.

In systemd before v242-rc4, it was discovered that pam_systemd does not properly sanitize the environment before using the XDG_SEAT variable. It is possible for an attacker, in some particular configurations, to set a XDG_SEAT environment variable which allows for commands to be checked against polkit policies using the "allow_active" element rather than "allow_any".

Multiple format string vulnerabilities in Condor 7.2.0 through 7.6.4, and possibly certain 7.7.x versions, as used in Red Hat MRG Grid and possibly other products, allow local users to cause a denial of service (condor_schedd daemon and failure to launch jobs) and possibly execute arbitrary code via format string specifiers in (1) the reason for a hold for a job that uses an XML user log, (2) the filename of a file to be transferred, and possibly other unspecified vectors.

Race condition in mm/gup.c in the Linux kernel 2.x through 4.x before 4.8.3 allows local users to gain privileges by leveraging incorrect handling of a copy-on-write (COW) feature to write to a read-only memory mapping, as exploited in the wild in October 2016, aka "Dirty COW."

A flaw was found in the PKI-server, where the spkispawn command, when run in debug mode, stores admin credentials in the installation log file. This flaw allows a local attacker to retrieve the file to obtain the admin password and gain admin privileges to the Dogtag CA manager. The highest threat from this vulnerability is to confidentiality.

pkexec, when used with --user nonpriv, allows local users to escape to the parent session via a crafted TIOCSTI ioctl call, which pushes characters to the terminal's input buffer.

arch/powerpc/mm/mmu_context_book3s64.c in the Linux kernel before 5.1.15 for powerpc has a bug where unrelated processes may be able to read/write to one another's virtual memory under certain conditions via an mmap above 512 TB. Only a subset of powerpc systems are affected.

An issue was discovered in the Linux kernel before 5.0.4. There is a use-after-free upon attempted read access to /proc/ioports after the ipmi_si module is removed, related to drivers/char/ipmi/ipmi_si_intf.c, drivers/char/ipmi/ipmi_si_mem_io.c, and drivers/char/ipmi/ipmi_si_port_io.c.

automount 5.0.8, when a program map uses certain interpreted languages, uses the calling user's USER and HOME environment variable values instead of the values for the user used to run the mapped program, which allows local users to gain privileges via a Trojan horse program in the user home directory.

Multiple integer overflows in the block drivers in QEMU, possibly before 2.0.0, allow local users to cause a denial of service (crash) via a crafted catalog size in (1) the parallels_open function in block/parallels.c or (2) bochs_open function in bochs.c, a large L1 table in the (3) qcow2_snapshot_load_tmp in qcow2-snapshot.c or (4) qcow2_grow_l1_table function in qcow2-cluster.c, (5) a large request in the bdrv_check_byte_request function in block.c and other block drivers, (6) crafted cluster indexes in the get_refcount function in qcow2-refcount.c, or (7) a large number of blocks in the cloop_open function in cloop.c, which trigger buffer overflows, memory corruption, large memory allocations and out-of-bounds read and writes.

The KVM subsystem in the Linux kernel before 3.0 does not check whether kernel addresses are specified during allocation of memory slots for use in a guest's physical address space, which allows local users to gain privileges or obtain sensitive information from kernel memory via a crafted application, related to arch/x86/kvm/paging_tmpl.h and virt/kvm/kvm_main.c.

A race condition was found in the Linux kernels implementation of the floppy disk drive controller driver software. The impact of this issue is lessened by the fact that the default permissions on the floppy device (/dev/fd0) are restricted to root. If the permissions on the device have changed the impact changes greatly. In the default configuration root (or equivalent) permissions are required to attack this flaw.

NVIDIA vGPU software for Windows and Linux contains a vulnerability where unprivileged users could execute privileged operations on the host. A successful exploit of this vulnerability might lead to data tampering, escalation of privileges, and denial of service.

A privilege escalation flaw was found in gluster 3.x snapshot scheduler. Any gluster client allowed to mount gluster volumes could also mount shared gluster storage volume and escalate privileges by scheduling malicious cronjob via symlink.

Ansible Tower before version 3.2.4 has a flaw in the management of system and organization administrators that allows for privilege escalation. System administrators that are members of organizations can have their passwords reset by organization administrators, allowing organization administrators access to the entire system.

A flaw was found in the way samba handled file and directory permissions. An authenticated user could use this flaw to gain access to certain file and directory information which otherwise would be unavailable to the attacker.

A flaw was found in Quay. When an organization acts as a proxy cache, and a user or robot pulls an image that hasn't been mirrored yet, they are granted "Admin" permissions on the newly created repository.

An insecure modification flaw in the /etc/passwd file was found in the redhat-sso-7 container. An attacker with access to the container can use this flaw to modify the /etc/passwd and escalate their privileges.

An insecure modification vulnerability in the /etc/passwd file was found in the openshift/ansible-service-broker as shipped in Red Hat Openshift 4 and 3.11. An attacker with access to the container could use this flaw to modify /etc/passwd and escalate their privileges.

It was found that the improper default permissions on /tmp/auth directory in JBoss Enterprise Application Platform before 7.1.0 can allow any local user to connect to CLI and allow the user to execute any arbitrary operations.

A privilege escalation flaw was found in the Ansible Tower. When Tower before 3.0.3 deploys a PostgreSQL database, it incorrectly configures the trust level of postgres user. An attacker could use this vulnerability to gain admin level access to the database.

An insecure modification vulnerability in the /etc/passwd file was found in the operator-framework/hadoop as shipped in Red Hat Openshift 4. An attacker with access to the container could use this flaw to modify /etc/passwd and escalate their privileges.

A flaw was found during the upgrade of an existing OpenShift Container Platform 3.x cluster. Using CRI-O, the dockergc service account is assigned to the current namespace of the user performing the upgrade. This flaw can allow an unprivileged user to escalate their privileges to those allowed by the privileged Security Context Constraints.

A flaw was found in cifs-utils in versions before 6.13. A user when mounting a krb5 CIFS file system from within a container can use Kerberos credentials of the host. The highest threat from this vulnerability is to data confidentiality and integrity.

A vulnerability was found in TRENDnet TEW-822DRE FW103B02. It has been classified as problematic. This affects an unknown part of the component vsftpd. The manipulation leads to least privilege violation. Attacking locally is a requirement. The complexity of an attack is rather high. The exploitability is told to be difficult. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was found in TRENDnet TV-IP110WN 1.2.2 and classified as problematic. Affected by this issue is some unknown functionality of the file /server/boa.conf of the component Embedded Boa Web Server. The manipulation leads to least privilege violation. Local access is required to approach this attack. The complexity of an attack is rather high. The exploitation is known to be difficult. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

An incorrect privilege assignment vulnerability when writing application-specific files in the Palo Alto Networks Global Protect Agent for Linux on ARM platform allows a local authenticated user to gain root privileges on the system. This issue affects Palo Alto Networks Global Protect Agent for Linux 5.0 versions before 5.0.8; 5.1 versions before 5.1.1.

The misconfiguration in the sudoers configuration of the operating system in Infinera G42 version R6.1.3 allows low privileged OS users to read/write physical memory via devmem command line tool. This could allow sensitive information disclosure, denial of service, and privilege escalation by tampering with kernel memory. Details: The output of "sudo -l" reports the presence of "devmem" command executable as super user without using a password. This command allows to read and write an arbitrary memory area of the target device, specifying an absolute address.