An out-of-bounds read flaw was found in Shim when it tried to validate the SBAT information. This issue may expose sensitive data during the system's boot phase.

NVIDIA GPU Display Driver for Linux contains a vulnerability in the kernel mode layer handler, where an unprivileged regular user can cause an integer to be truncated, which may lead to denial of service or data tampering.

The function hso_get_config_data in drivers/net/usb/hso.c in the Linux kernel through 4.19.8 reads if_num from the USB device (as a u8) and uses it to index a small array, resulting in an object out-of-bounds (OOB) read that potentially allows arbitrary read in the kernel address space.

A vulnerability was found in libX11 due to a boundary condition within the _XkbReadKeySyms() function. This flaw allows a local user to trigger an out-of-bounds read error and read the contents of memory on the system.

A vulnerability was found in libXpm due to a boundary condition within the XpmCreateXpmImageFromBuffer() function. This flaw allows a local attacker to trigger an out-of-bounds read error and read the contents of memory on the system.

A vulnerability was found in libXpm where a vulnerability exists due to a boundary condition, a local user can trigger an out-of-bounds read error and read contents of memory on the system.

An out of bounds read was discovered in systemd-journald in the way it parses log messages that terminate with a colon ':'. A local attacker can use this flaw to disclose process memory data. Versions from v221 to v239 are vulnerable.

An out-of-bounds memory read flaw was found in the Linux kernel's BPF subsystem in how a user calls the bpf_tail_call function with a key larger than the max_entries of the map. This flaw allows a local user to gain unauthorized access to data.

An issue was discovered in FreeRDP before 2.1.1. An out-of-bounds (OOB) read vulnerability has been detected in security_fips_decrypt in libfreerdp/core/security.c due to an uninitialized value.

A vulnerability was found in DPDK versions 18.11 and above. The vhost-crypto library code is missing validations for user-supplied values, potentially allowing an information leak through an out-of-bounds memory read.

An out-of-bounds read vulnerability was found in the SLiRP networking implementation of the QEMU emulator. This flaw occurs in the icmp6_send_echoreply() routine while replying to an ICMP echo request, also known as ping. This flaw allows a malicious guest to leak the contents of the host memory, resulting in possible information disclosure. This flaw affects versions of libslirp before 4.3.1.

A flaw was found in the Linux kernel’s IP framework for transforming packets (XFRM subsystem). This issue may allow a malicious user with CAP_NET_ADMIN privileges to cause a 4 byte out-of-bounds read of XFRMA_MTIMER_THRESH when parsing netlink attributes, leading to potential leakage of sensitive heap data to userspace.

In create_pinctrl of core.c, there is a possible out of bounds read due to a use after free. This could lead to local information disclosure with no additional execution privileges needed. User interaction is not needed for exploitation.Product: AndroidVersions: Android kernelAndroid ID: A-140550171

In the Android kernel in F2FS driver there is a possible out of bounds read due to a missing bounds check. This could lead to local information disclosure with system execution privileges needed. User interaction is not needed for exploitation.

Out-of-bounds read in some Intel(R) oneVPL GPU software before version 22.6.5 may allow an authenticated user to potentially enable information disclosure via local access.

In uvc_parse_standard_control of uvc_driver.c, there is a possible out-of-bound read due to improper input validation. This could lead to local information disclosure with no additional execution privileges needed. User interaction is not needed for exploitation. Product: Android. Versions: Android kernel. Android ID: A-111760968.

QEMU, through version 2.10 and through version 3.1.0, is vulnerable to an out-of-bounds read of up to 128 bytes in the hw/i2c/i2c-ddc.c:i2c_ddc() function. A local attacker with permission to execute i2c commands could exploit this to read stack memory of the qemu process on the host.

An issue was discovered in the Linux kernel through 5.11.x. kernel/bpf/verifier.c performs undesirable out-of-bounds speculation on pointer arithmetic, leading to side-channel attacks that defeat Spectre mitigations and obtain sensitive information from kernel memory. Specifically, for sequences of pointer arithmetic operations, the pointer modification performed by the first operation is not correctly accounted for when restricting subsequent operations.

The KVM implementation in the Linux kernel through 4.14.7 allows attackers to obtain potentially sensitive information from kernel memory, aka a write_mmio stack-based out-of-bounds read, related to arch/x86/kvm/x86.c and include/trace/events/kvm.h.

The destroy_one_secret function in nm-setting-vpn.c in libnm-util in the NetworkManager package 0.8.999-3.git20110526 in Fedora 15 creates a log entry containing a certificate password, which allows local users to obtain sensitive information by reading a log file.

A flaw was found in ansible module where credentials are disclosed in the console log by default and not protected by the security feature when using the bitbucket_pipeline_variable module. This flaw allows an attacker to steal bitbucket_pipeline credentials. The highest threat from this vulnerability is to confidentiality.

glibc 2.1.9x and earlier does not properly clear the RESOLV_HOST_CONF, HOSTALIASES, or RES_OPTIONS environmental variables when executing setuid/setgid programs, which could allow local users to read arbitrary files.

An issue was discovered in the Linux kernel before 4.18.11. The ipddp_ioctl function in drivers/net/appletalk/ipddp.c allows local users to obtain sensitive kernel address information by leveraging CAP_NET_ADMIN to read the ipddp_route dev and next fields via an SIOCFINDIPDDPRT ioctl call.

MySQL-GUI-tools (mysql-administrator) leaks passwords into process list after with launch of mysql text console

mysql-gui-tools (mysql-query-browser and mysql-admin) before 5.0r14+openSUSE-2.3 exposes the password of a user connected to the MySQL server in clear text form via the list of running processes.

A flaw was found in pesign. The pesign package provides a systemd service used to start the pesign daemon. This service unit runs a script to set ACLs for /etc/pki/pesign and /run/pesign directories to grant access privileges to users in the 'pesign' group. However, the script doesn't check for symbolic links. This could allow an attacker to gain access to privileged files and directories via a path traversal attack.

An information disclosure flaw was found in ansible-core due to a failure to respect the ANSIBLE_NO_LOG configuration in some scenarios. Information is still included in the output in certain tasks, such as loop items. Depending on the task, this issue may include sensitive information, such as decrypted secret values.

The ax25_getname function in net/ax25/af_ax25.c in the Linux kernel before 2.6.37-rc2 does not initialize a certain structure, which allows local users to obtain potentially sensitive information from kernel stack memory by reading a copy of this structure.

The eql_g_master_cfg function in drivers/net/eql.c in the Linux kernel before 2.6.36-rc5 does not properly initialize a certain structure member, which allows local users to obtain potentially sensitive information from kernel stack memory via an EQL_GETMASTRCFG ioctl call.

The xfs_swapext function in fs/xfs/xfs_dfrag.c in the Linux kernel before 2.6.35 does not properly check the file descriptors passed to the SWAPEXT ioctl, which allows local users to leverage write access and obtain read access by swapping one file into another file.

Netty is an open-source, asynchronous event-driven network application framework for rapid development of maintainable high performance protocol servers & clients. In Netty before version 4.1.59.Final there is a vulnerability on Unix-like systems involving an insecure temp file. When netty's multipart decoders are used local information disclosure can occur via the local system temporary directory if temporary storing uploads on the disk is enabled. On unix-like systems, the temporary directory is shared between all user. As such, writing to this directory using APIs that do not explicitly set the file/directory permissions can lead to information disclosure. Of note, this does not impact modern MacOS Operating Systems. The method "File.createTempFile" on unix-like systems creates a random file, but, by default will create this file with the permissions "-rw-r--r--". Thus, if sensitive information is written to this file, other local users can read this information. This is the case in netty's "AbstractDiskHttpData" is vulnerable. This has been fixed in version 4.1.59.Final. As a workaround, one may specify your own "java.io.tmpdir" when you start the JVM or use "DefaultHttpDataFactory.setBaseDir(...)" to set the directory to something that is only readable by the current user.

sgml-tools (aka sgmltools) before 1.0.9-15 creates temporary files with insecure permissions, which allows other users to read files that are being processed by sgml-tools.

The patch_instruction function in hw/i386/kvmvapic.c in QEMU does not initialize the imm32 variable, which allows local guest OS administrators to obtain sensitive information from host stack memory by accessing the Task Priority Register (TPR).

arch/x86/ia32/ia32entry.S in the Linux kernel before 2.6.31.4 on the x86_64 platform does not clear certain kernel registers before a return to user mode, which allows local users to read register values from an earlier process by switching an ia32 process to 64-bit mode.

The tcf_fill_node function in net/sched/cls_api.c in the netlink subsystem in the Linux kernel 2.6.x before 2.6.32-rc5, and 2.4.37.6 and earlier, does not initialize a certain tcm__pad2 structure member, which might allow local users to obtain sensitive information from kernel memory via unspecified vectors. NOTE: this issue exists because of an incomplete fix for CVE-2005-4881.

libosinfo 1.5.0 allows local users to discover credentials by listing a process, because credentials are passed to osinfo-install-script via the command line.

liboping 1.3.2 allows users reading arbitrary files upon the local system.

An issue was discovered in the Linux kernel through 4.19. An information leak in cdrom_ioctl_select_disc in drivers/cdrom/cdrom.c could be used by local attackers to read kernel memory because a cast from unsigned long to int interferes with bounds checking. This is similar to CVE-2018-10940 and CVE-2018-16658.

sssd versions from 1.13.0 to before 2.0.0 did not properly restrict access to the infopipe according to the "allowed_uids" configuration parameter. If sensitive information were stored in the user directory, this could be inadvertently disclosed to local attackers.

The (1) ssh2_load_userkey and (2) ssh2_save_userkey functions in PuTTY 0.51 through 0.63 do not properly wipe SSH-2 private keys from memory, which allows local users to obtain sensitive information by reading the memory.

The HYPERVISOR_xen_version hypercall in Xen 3.2.x through 4.5.x does not properly initialize data structures, which allows local guest users to obtain sensitive information via unspecified vectors.

A flaw was found in the permissions of a log file created by kexec-tools. This flaw allows a local unprivileged user to read this file and leak kernel internal information from a previous panic. The highest threat from this vulnerability is to confidentiality. This flaw affects kexec-tools shipped by Fedora versions prior to 2.0.21-8 and RHEL versions prior to 2.0.20-47.

A security flaw was found in the Linux kernel in a way that the cleancache subsystem clears an inode after the final file truncation (removal). The new file created with the same inode may contain leftover pages from cleancache and the old file data instead of the new one.

A flaw has been found in 389-ds-base versions 1.4.x.x before 1.4.1.3. When executed in verbose mode, the dscreate and dsconf commands may display sensitive information, such as the Directory Manager password. An attacker, able to see the screen or record the terminal standard error output, could use this flaw to gain sensitive information.

Ansible "User" module leaks any data which is passed on as a parameter to ssh-keygen. This could lean in undesirable situations such as passphrases credentials passed as a parameter for the ssh-keygen executable. Showing those credentials in clear text form for every user which have access just to the process list.

nss-ldapd before 0.6.8 uses world-readable permissions for the /etc/nss-ldapd.conf file, which allows local users to obtain a cleartext password for the LDAP server by reading the bindpw field.

The spectre_v2_select_mitigation function in arch/x86/kernel/cpu/bugs.c in the Linux kernel before 4.18.1 does not always fill RSB upon a context switch, which makes it easier for attackers to conduct userspace-userspace spectreRSB attacks.

arch/x86/kernel/paravirt.c in the Linux kernel before 4.18.1 mishandles certain indirect calls, which makes it easier for attackers to conduct Spectre-v2 attacks against paravirtual guests.

In ssh-agent in OpenSSH before 9.6, certain destination constraints can be incompletely applied. When destination constraints are specified during addition of PKCS#11-hosted private keys, these constraints are only applied to the first key, even if a PKCS#11 token returns multiple keys.