A vulnerability in the CLI parser of Cisco IOS XE Software could allow an authenticated, local attacker to execute commands on the underlying Linux shell of an affected device with root privileges. The vulnerability exist because the affected software improperly sanitizes command arguments, failing to prevent access to certain internal data structures on an affected device. An attacker who has privileged EXEC mode (privilege level 15) access to an affected device could exploit these vulnerabilities on the device by executing CLI commands that contain custom arguments. A successful exploit could allow the attacker to execute arbitrary commands with root privileges on the affected device.

A vulnerability in the Sourcefire tunnel control channel protocol in Cisco Firepower System Software running on Cisco Firepower Threat Defense (FTD) sensors could allow an authenticated, local attacker to execute specific CLI commands with root privileges on the Cisco Firepower Management Center (FMC), or through Cisco FMC on other Firepower sensors and devices that are controlled by the same Cisco FMC. To send the commands, the attacker must have root privileges for at least one affected sensor or the Cisco FMC. The vulnerability exists because the affected software performs insufficient checks for certain CLI commands, if the commands are executed via a Sourcefire tunnel connection. An attacker could exploit this vulnerability by authenticating with root privileges to a Firepower sensor or Cisco FMC, and then sending specific CLI commands to the Cisco FMC or through the Cisco FMC to another Firepower sensor via the Sourcefire tunnel connection. A successful exploit could allow the attacker to modify device configurations or delete files on the device that is running Cisco FMC Software or on any Firepower device that is managed by Cisco FMC.

A vulnerability in one of the diagnostic test CLI commands on Cisco Industrial Ethernet 4010 Series Switches running Cisco IOS Software could allow an authenticated, local attacker to impact the stability of the device. This could result in arbitrary code execution or a denial of service (DoS) condition. The attacker has to have valid user credentials at privilege level 15. The vulnerability is due to a diagnostic test CLI command that allows the attacker to write to the device memory. An attacker could exploit this vulnerability by authenticating to the targeted device and issuing a specific diagnostic test command at the CLI. An exploit could allow the attacker to overwrite system memory locations, which could have a negative impact on the stability of the device. Cisco Bug IDs: CSCvf71150.

A vulnerability in the configuration and monitoring service of the Cisco SD-WAN Solution could allow an authenticated, local attacker to execute arbitrary code with root privileges or cause a denial of service (DoS) condition on an affected device. The vulnerability is due to incomplete bounds checks for data that is provided by the configuration and monitoring service of the affected solution. An attacker could exploit this vulnerability by sending malicious data to the vDaemon listening service on an affected device. A successful exploit could allow the attacker to cause a buffer overflow condition on the affected device, which could allow the attacker to execute arbitrary code with root privileges on the device or cause the vDaemon listening service to reload and result in a DoS condition on the device. This vulnerability affects the following Cisco products if they are running a release of the Cisco SD-WAN Solution prior to Release 18.3.0: vBond Orchestrator Software, vEdge 100 Series Routers, vEdge 1000 Series Routers, vEdge 2000 Series Routers, vEdge 5000 Series Routers, vEdge Cloud Router Platform, vManage Network Management Software, vSmart Controller Software. Cisco Bug IDs: CSCvi70003.

Cisco Wireless LAN Controller (WLC) devices with software 7.0(240.0) allow local users to execute arbitrary OS commands in a privileged context via crafted CLI commands, aka Bug ID CSCuj39474.

A vulnerability in the debug plug-in functionality of the Cisco Unified Computing System (UCS) Manager, Cisco Firepower 4100 Series Next-Generation Firewall (NGFW), and Cisco Firepower 9300 Security Appliance could allow an authenticated, local attacker to execute arbitrary commands, aka Privilege Escalation. More Information: CSCvb86725 CSCvb86797. Known Affected Releases: 2.0(1.68) 3.1(1k)A. Known Fixed Releases: 92.2(1.105) 92.1(1.1733) 2.1(1.69).

Cisco NX-OS allows local users to gain privileges and execute arbitrary commands via shell metacharacters in unspecified command parameters, aka Bug IDs CSCtf19827 and CSCtf27788.

Buffer overflows in the Cisco VPN 5000 Client before 5.2.7 for Linux, and VPN 5000 Client before 5.2.8 for Solaris, allow local users to gain root privileges via (1) close_tunnel and (2) open_tunnel.

A vulnerability in the dynamic link library (DLL) loading mechanism in Cisco Advanced Malware Protection (AMP) for Endpoints Windows Connector, ClamAV for Windows, and Immunet could allow an authenticated, local attacker to perform a DLL hijacking attack on an affected Windows system. To exploit this vulnerability, the attacker would need valid credentials on the system. The vulnerability is due to insufficient validation of directory search paths at run time. An attacker could exploit this vulnerability by placing a malicious DLL file on an affected system. A successful exploit could allow the attacker to execute arbitrary code with SYSTEM privileges.

Multiple vulnerabilities in the fast reload feature of Cisco IOS XE Software running on Cisco Catalyst 3850, Cisco Catalyst 9300, and Cisco Catalyst 9300L Series Switches could allow an authenticated, local attacker to either execute arbitrary code on the underlying operating system, install and boot a malicious software image, or execute unsigned binaries on an affected device. These vulnerabilities are due to improper checks performed by system boot routines. To exploit these vulnerabilities, the attacker would need privileged access to the CLI of the device. A successful exploit could allow the attacker to either execute arbitrary code on the underlying operating system or execute unsigned code and bypass the image verification check part of the secure boot process. For more information about these vulnerabilities, see the Details section of this advisory.

A vulnerability in the CLI of Cisco IOS XE SD-WAN Software could allow an authenticated, local attacker to inject arbitrary commands to be executed with root privileges on the underlying operating system. This vulnerability is due to insufficient input validation on certain CLI commands. An attacker could exploit this vulnerability by authenticating to the device and submitting crafted input to the CLI. The attacker must be authenticated as an administrative user to execute the affected commands. A successful exploit could allow the attacker to execute commands with root privileges.

A vulnerability in the role-based access control of Cisco IOS XE SD-WAN Software could allow an authenticated, local attacker with read-only privileges to obtain administrative privileges by using the console port when the device is in the default SD-WAN configuration. This vulnerability occurs because the default configuration is applied for console authentication and authorization. An attacker could exploit this vulnerability by connecting to the console port and authenticating as a read-only user. A successful exploit could allow a user with read-only permissions to access administrative privileges.

Cisco VPN Client 5.x through 5.0.07.0440 uses weak permissions for vpnclient.ini, which allows local users to gain privileges by entering an arbitrary program name in the Command field of the ApplicationLauncher section.

A vulnerability in a CLI command of Cisco IOS XR Software for the Cisco 8000 Series Routers and Network Convergence System 540 Series Routers running NCS540L software images could allow an authenticated, local attacker to elevate their privilege to root. To exploit this vulnerability, an attacker would need to have a valid account on an affected device. The vulnerability is due to insufficient validation of command line arguments. An attacker could exploit this vulnerability by authenticating to the device and entering a crafted command at the prompt. A successful exploit could allow an attacker with low-level privileges to escalate their privilege level to root.

Multiple vulnerabilities in the install, uninstall, and upgrade processes of Cisco AnyConnect Secure Mobility Client for Windows could allow an authenticated, local attacker to hijack DLL or executable files that are used by the application. A successful exploit could allow the attacker to execute arbitrary code on an affected device with SYSTEM privileges. To exploit these vulnerabilities, the attacker must have valid credentials on the Windows system. For more information about these vulnerabilities, see the Details section of this advisory.

Multiple vulnerabilities in Cisco DNA Spaces Connector could allow an authenticated, local attacker to elevate privileges and execute arbitrary commands on the underlying operating system as root. These vulnerabilities are due to insufficient restrictions during the execution of affected CLI commands. An attacker could exploit these vulnerabilities by leveraging the insufficient restrictions during execution of these commands. A successful exploit could allow the attacker to elevate privileges from dnasadmin and execute arbitrary commands on the underlying operating system as root.

A vulnerability in the upgrade process of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an authenticated, local attacker to inject commands that could be executed with root privileges on the underlying operating system (OS). This vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by uploading a crafted upgrade package file to an affected device. A successful exploit could allow the attacker to inject commands that could be executed with root privileges on the underlying OS.

A vulnerability in the internal message processing of Cisco RV340, RV340W, RV345, and RV345P Dual WAN Gigabit VPN Routers could allow an authenticated, local attacker to run arbitrary commands with root privileges on the underlying operating system (OS). This vulnerability exists because an internal messaging service does not properly sanitize input. An attacker could exploit this vulnerability by first authenticating to the device and then sending a crafted request to the internal service. A successful exploit could allow the attacker to run arbitrary commands with root privileges on the underlying OS. To exploit this vulnerability, the attacker must have valid Administrator credentials for the device.

A vulnerability in the ROM Monitor (ROMMON) of Cisco IOS XE Software for Cisco Catalyst IE3200, IE3300, and IE3400 Rugged Series Switches, Cisco Catalyst IE3400 Heavy Duty Series Switches, and Cisco Embedded Services 3300 Series Switches could allow an unauthenticated, physical attacker to execute unsigned code at system boot time. This vulnerability is due to incorrect validations of specific function arguments passed to a boot script when specific ROMMON variables are set. An attacker could exploit this vulnerability by setting malicious values for a specific ROMMON variable. A successful exploit could allow the attacker to execute unsigned code and bypass the image verification check during the secure boot process of an affected device. To exploit this vulnerability, the attacker would need to have unauthenticated, physical access to the device or obtain privileged access to the root shell on the device.

A vulnerability in the CLI of Cisco Firepower Threat Defense (FTD) Software could allow an authenticated, local attacker to execute arbitrary commands with root privileges on the underlying operating system of an affected device that is running in multi-instance mode. This vulnerability is due to insufficient validation of user-supplied command arguments. An attacker could exploit this vulnerability by submitting crafted input to the affected command. A successful exploit could allow the attacker to execute commands on the underlying operating system with root privileges.

A vulnerability in one of the diagnostic test CLI commands of Cisco IOS XE Software could allow an authenticated, local attacker to execute arbitrary code on an affected device. To exploit this vulnerability, the attacker would need to have valid user credentials at privilege level 15. This vulnerability exists because the affected software permits modification of the run-time memory of an affected device under specific circumstances. An attacker could exploit this vulnerability by authenticating to the affected device and issuing a specific diagnostic test command at the CLI. A successful exploit could trigger a logic error in the code that was designed to restrict run-time memory modifications. The attacker could take advantage of this logic error to overwrite system memory locations and execute arbitrary code on the underlying Linux operating system (OS) of the affected device.

Multiple vulnerabilities in Cisco SD-WAN vManage Software could allow an unauthenticated, remote attacker to execute arbitrary code or allow an authenticated, local attacker to gain escalated privileges on an affected system. For more information about these vulnerabilities, see the Details section of this advisory.

A vulnerability in Cisco Nexus 9000 Series Fabric Switches in Application Centric Infrastructure (ACI) mode could allow an authenticated, local attacker to elevate privileges on an affected device. This vulnerability is due to insufficient restrictions during the execution of a specific CLI command. An attacker with administrative privileges could exploit this vulnerability by performing a command injection attack on the vulnerable command. A successful exploit could allow the attacker to access the underlying operating system as root.

A vulnerability in the CLI of Cisco IOS XR Software could allow an authenticated, local attacker to inject arbitrary commands that are executed with root privileges on the underlying Linux operating system (OS) of an affected device. This vulnerability is due to insufficient input validation of commands that are supplied by the user. An attacker could exploit this vulnerability by authenticating to a device and submitting crafted input to an affected command. A successful exploit could allow the attacker to execute commands on the underlying Linux OS with root privileges.

A vulnerability in Cisco Enterprise NFV Infrastructure Software (NFVIS) could allow an authenticated, local attacker to perform a command injection attack on an affected device. The vulnerability is due to insufficient validation of user-supplied input to a configuration command. An attacker could exploit this vulnerability by including malicious input during the execution of this command. A successful exploit could allow a non-privileged attacker authenticated in the restricted CLI to execute arbitrary commands on the underlying operating system (OS) with root privileges.

A vulnerability in the update service of Cisco Webex Meetings Desktop App for Windows could allow an authenticated, local attacker to execute arbitrary commands as a privileged user. The vulnerability is due to insufficient validation of user-supplied parameters. An attacker could exploit this vulnerability by invoking the update service command with a crafted argument. An exploit could allow the attacker to run arbitrary commands with SYSTEM user privileges. While the CVSS Attack Vector metric denotes the requirement for an attacker to have local access, administrators should be aware that in Active Directory deployments, the vulnerability could be exploited remotely by leveraging the operating system remote management tools.

Cisco Aironet 1850 access points with software 8.1(112.4) allow local users to gain privileges via crafted CLI commands, aka Bug ID CSCuv79694.

Cisco AnyConnect Secure Mobility Client 4.1(8) on OS X and Linux does not verify pathnames before installation actions, which allows local users to obtain root privileges via a crafted installation file, aka Bug ID CSCuv11947.

A vulnerability in the SSH management feature of multiple Cisco Access Points (APs) platforms could allow a local, authenticated user to modify files on the affected device and possibly gain escalated privileges. The vulnerability is due to improper checking on file operations within the SSH management interface. A network administrator user could exploit this vulnerability by accessing an affected device through SSH management to make a configuration change. A successful exploit could allow the attacker to gain privileges equivalent to the root user.

Multiple vulnerabilities in the install, uninstall, and upgrade processes of Cisco AnyConnect Secure Mobility Client for Windows could allow an authenticated, local attacker to hijack DLL or executable files that are used by the application. A successful exploit could allow the attacker to execute arbitrary code on an affected device with SYSTEM privileges. To exploit these vulnerabilities, the attacker must have valid credentials on the Windows system. For more information about these vulnerabilities, see the Details section of this advisory.

Multiple vulnerabilities in Cisco DNA Spaces Connector could allow an authenticated, local attacker to elevate privileges and execute arbitrary commands on the underlying operating system as root. These vulnerabilities are due to insufficient restrictions during the execution of affected CLI commands. An attacker could exploit these vulnerabilities by leveraging the insufficient restrictions during execution of these commands. A successful exploit could allow the attacker to elevate privileges from dnasadmin and execute arbitrary commands on the underlying operating system as root.

A vulnerability in the software image verification functionality of Cisco IOS XE Software for the Cisco Catalyst 9000 Family of switches could allow an unauthenticated, physical attacker to execute unsigned code at system boot time. The vulnerability is due to an improper check in the code function that manages the verification of the digital signatures of system image files during the initial boot process. An attacker could exploit this vulnerability by loading unsigned software on an affected device. A successful exploit could allow the attacker to boot a malicious software image or execute unsigned code and bypass the image verification check part of the secure boot process of an affected device. To exploit this vulnerability, the attacker would need to have unauthenticated physical access to the device or obtain privileged access to the root shell on the device.

A vulnerability in the CLI of Cisco SD-WAN Software could allow an authenticated, local attacker to gain elevated privileges on an affected system. This vulnerability exists because the affected software does not properly restrict access to privileged processes. An attacker could exploit this vulnerability by invoking a privileged process in the affected system. A successful exploit could allow the attacker to perform actions with the privileges of the root user.

Cisco Prime Network Services Controller 3.0 allows local users to bypass intended access restrictions and execute arbitrary commands via additional parameters to an unspecified command, aka Bug ID CSCus99427.

The CLI command parser on Cisco RV110W, RV130W, and RV215W devices allows local users to execute arbitrary shell commands as an administrator via crafted parameters, aka Bug IDs CSCuv90134, CSCux58161, and CSCux73567.

The boot implementation on Cisco ASR 5000 and 5500 devices with software 14.0 allows local users to execute arbitrary Linux commands by leveraging administrative privileges for storage of these commands in a Compact Flash (CF) file, aka Bug ID CSCuu75278.

Multiple vulnerabilities in Cisco Small Business RV160, RV260, RV340, and RV345 Series Routers could allow an attacker to do any of the following: Execute arbitrary code Elevate privileges Execute arbitrary commands Bypass authentication and authorization protections Fetch and run unsigned software Cause denial of service (DoS) For more information about these vulnerabilities, see the Details section of this advisory.

Multiple vulnerabilities in Cisco Small Business RV160, RV260, RV340, and RV345 Series Routers could allow an attacker to do any of the following: Execute arbitrary code Elevate privileges Execute arbitrary commands Bypass authentication and authorization protections Fetch and run unsigned software Cause denial of service (DoS) For more information about these vulnerabilities, see the Details section of this advisory.

A vulnerability in Cisco SD-WAN Software could allow an authenticated, local attacker to elevate privileges to root on the underlying operating system. The vulnerability is due to insufficient security controls on the CLI. An attacker could exploit this vulnerability by using an affected CLI utility that is running on an affected system. A successful exploit could allow the attacker to gain root privileges.

A vulnerability in the CLI of Cisco StarOS operating system for Cisco ASR 5000 Series Routers could allow an authenticated, local attacker to elevate privileges on an affected device. The vulnerability is due to insufficient input validation of CLI commands. An attacker could exploit this vulnerability by sending crafted commands to the CLI. A successful exploit could allow the attacker to execute arbitrary code with the privileges of the root user on the affected device. To exploit this vulnerability, an attacker would need to have valid credentials on an affected device and know the password for the cli test-commands command.

A vulnerability in Cisco SD-WAN Software could allow an authenticated, local attacker to elevate privileges to root on the underlying operating system. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by sending a crafted request to a utility that is running on an affected system. A successful exploit could allow the attacker to gain root privileges.

A vulnerability in the CLI of Cisco SD-WAN Solution software could allow an authenticated, local attacker to inject arbitrary commands that are executed with root privileges. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by authenticating to the device and submitting crafted input to the CLI utility. The attacker must be authenticated to access the CLI utility. A successful exploit could allow the attacker to execute commands with root privileges.

A vulnerability in the loading mechanism of specific DLLs in the Cisco Webex Teams client for Windows could allow an authenticated, local attacker to load a malicious library. To exploit this vulnerability, the attacker needs valid credentials on the Windows system. The vulnerability is due to incorrect handling of directory paths at run time. An attacker could exploit this vulnerability by placing a malicious DLL file in a specific location on the targeted system. This file will execute when the vulnerable application launches. A successful exploit could allow the attacker to execute arbitrary code on the targeted system with the privileges of another user’s account.

A vulnerability in the CLI of Cisco IOS XE Software could allow an authenticated, local attacker to inject a command to the underlying operating system that will execute with root privileges upon the next reboot of the device. The authenticated user must have privileged EXEC permissions on the device. The vulnerability is due to insufficient protection of values passed to a script that executes during device startup. An attacker could exploit this vulnerability by writing values to a specific file. A successful exploit could allow the attacker to execute commands with root privileges each time the affected device is restarted.

A vulnerability in the Enable Secret feature of Cisco Nexus 3000 Series Switches and Cisco Nexus 9000 Series Switches in standalone NX-OS mode could allow an authenticated, local attacker to issue the enable command and get full administrative privileges. To exploit this vulnerability, the attacker would need to have valid credentials for the affected device. The vulnerability is due to a logic error in the implementation of the enable command. An attacker could exploit this vulnerability by logging in to the device and issuing the enable command. A successful exploit could allow the attacker to gain full administrative privileges without using the enable password. Note: The Enable Secret feature is disabled by default.

A vulnerability in the local management (local-mgmt) CLI of Cisco FXOS Software and Cisco UCS Manager Software could allow an authenticated, local attacker to execute arbitrary commands on the underlying operating system (OS) of an affected device. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by including crafted arguments to specific commands. A successful exploit could allow the attacker to execute arbitrary commands on the underlying OS with the privileges of the currently logged-in user for all affected platforms excluding Cisco UCS 6400 Series Fabric Interconnects. On Cisco UCS 6400 Series Fabric Interconnects, the injected commands are executed with root privileges.