Certain NETGEAR devices are affected by command injection by an authenticated user. This affects R6400 before 1.0.1.52, R6400v2 before 1.0.4.84, R6700v3 before 1.0.4.84, R6700v2 before 1.2.0.62, R6900v2 before 1.2.0.62, and R7000P before 1.3.2.124.

Certain NETGEAR devices are affected by incorrect configuration of security settings. This affects D6200 before 1.1.00.40, D7000 before 1.0.1.78, R6020 before 1.0.0.42, R6080 before 1.0.0.42, R6120 before 1.0.0.66, R6260 before 1.1.0.78, R6700v2 before 1.2.0.76, R6800 before 1.2.0.76, R6900v2 before 1.2.0.76, R7450 before 1.2.0.76, AC2100 before 1.2.0.76, and AC2400 before 1.2.0.76.

NETGEAR WAC104 devices before 1.0.4.15 are affected by incorrect configuration of security settings.

Certain NETGEAR devices are affected by command injection by an authenticated user. This affects D3600 before 1.0.0.75, D6000 before 1.0.0.75, D6100 before 1.0.0.63, EX2700 before 1.0.1.48, EX6100v2 before 1.0.1.76, EX6150v2 before 1.0.1.76, EX6200v2 before 1.0.1.72, EX6400 before 1.0.2.136, EX7300 before 1.0.2.136, EX8000 before 1.0.1.180, R7800 before 1.0.2.52, R8900 before 1.0.4.2, R9000 before 1.0.4.2, WN2000RPTv3 before 1.0.1.32, WN3000RPv2 before 1.0.0.68, WN3100RPv2 before 1.0.0.60, WNDR3700v4 before 1.0.2.102, WNDR4300v1 before 1.0.2.104, WNDR4300v2 before 1.0.0.58, WNDR4500v3 before 1.0.0.58, WNR2000v5 before 1.0.0.68, and XR500 before 2.3.2.32.

Certain NETGEAR devices are affected by command injection by an authenticated user. This affects D3600 before 1.0.0.75, D6000 before 1.0.0.75, D6100 before 1.0.0.63, R7800 before 1.0.2.52, R8900 before 1.0.4.2, R9000 before 1.0.4.2, WNDR3700v4 before 1.0.2.102, WNDR4300v1 before 1.0.2.104, WNDR4300v2 before 1.0.0.58, WNDR4500v3 before 1.0.0.58, WNR2000v5 before 1.0.0.68, and XR500 before 2.3.2.32.

Certain NETGEAR devices are affected by command injection by an authenticated user. This affects D6220 before 1.0.0.48, D6400 before 1.0.0.82, D7000v2 before 1.0.0.52, D8500 before 1.0.3.43, R6250 before 1.0.4.34, R6400 before 1.0.1.44, R6400v2 before 1.0.2.62, R7100LG before 1.0.0.48, R7300DST before 1.0.0.68, R7900 before 1.0.3.8, R7900P before 1.4.1.30, R8000 before 1.0.4.28, R8000P before 1.4.1.30, R8300 before 1.0.2.128, and R8500 before 1.0.2.128.

Certain NETGEAR devices are affected by a buffer overflow by an authenticated user. This affects D6220 before 1.0.0.52, D6400 before 1.0.0.86, D7000v2 before 1.0.0.53, D8500 before 1.0.3.44, DGN2200v4 before 1.0.0.110, DGND2200Bv4 before 1.0.0.109, R6250 before 1.0.4.34, R6300v2 before 1.0.4.32, R6400 before 1.0.1.46, R6400v2 before 1.0.2.62, R6700 before 1.0.2.6, R6900 before 1.0.2.4, R6900P before 1.3.1.64, R7000 before 1.0.9.60, R7000P before 1.3.1.64, R7100LG before 1.0.0.52, R7300DST before 1.0.0.70, R7900 before 1.0.3.8, R7900P before 1.4.1.30, R8000 before 1.0.4.28, R8000P before 1.4.1.30, R8300 before 1.0.2.128, R8500 before 1.0.2.128, WNDR3400v3 before 1.0.1.24, and WNR3500Lv2 before 1.2.0.56.

Certain NETGEAR devices are affected by command injection by an authenticated user. This affects R6400v2 before 1.0.4.84, R6700 before 1.0.2.8, R6700v3 before 1.0.4.84, R6900 before 1.0.2.8, and R7900 before 1.0.3.10.

Certain NETGEAR devices are affected by a buffer overflow by an authenticated user. This affects D8500 before 1.0.3.43, R8500 before 1.0.2.128, R8300 before 1.0.2.128, R8000 before 1.0.4.28, R7300DST before 1.0.0.68, R7100LG before 1.0.0.48, R6900P before 1.3.1.44, R7900P before 1.4.1.30, R8000P before 1.4.1.30, R7000P before 1.3.1.44, R7000 before 1.0.9.34, R6900 before 1.0.2.4, R6700 before 1.0.2.6, and R6400 before 1.0.1.44.

Certain NETGEAR devices are affected by command injection by an authenticated user. This affects D6000 before 1.0.0.75, D6100 before 1.0.0.63, EX2700 before 1.0.1.48, EX6100v2 before 1.0.1.76, EX6150v2 before 1.0.1.76, EX6200v2 before 1.0.1.72, EX6400 before 1.0.2.136, EX7300 before 1.0.2.136, EX8000 before 1.0.1.180, R7800 before 1.0.2.52, R8900 before 1.0.4.2, R9000 before 1.0.4.2, WN2000RPTv3 before 1.0.1.32, WN3000RPv2 before 1.0.0.68, WN3100RPv2 before 1.0.0.60, WNDR3700v4 before 1.0.2.102, WNDR4300v1 before 1.0.2.104, WNDR4300v2 before 1.0.0.58, WNDR4500v3 before 1.0.0.58, WNR2000v5 before 1.0.0.68, and XR500 before 2.3.2.32.

Certain NETGEAR devices are affected by command injection by an authenticated user. This affects D6100 before 1.0.0.63, R7800 before 1.0.2.52, R8900 before 1.0.4.2, R9000 before 1.0.4.2, WNDR3700v4 before 1.0.2.102, WNDR4300v1 before 1.0.2.104, WNDR4300v2 before 1.0.0.58, WNDR4500v3 before 1.0.0.58, WNR2000v5 before 1.0.0.68, and XR500 before 2.3.2.32.

NETGEAR RAX30 logCtrl Command Injection Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of NETGEAR RAX30 routers. Although authentication is required to exploit this vulnerability, the existing authentication mechanism can be bypassed. The specific flaw exists within the logCtrl action. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-19825.

Certain NETGEAR devices are affected by a buffer overflow by an authenticated user. This affects DGN2200 before 1.0.0.58, DGN2200B before 1.0.0.58, D8500 before 1.0.3.42, D7000v2 before 1.0.0.51, D6400 before 1.0.0.80, D6220 before 1.0.0.44, EX7000 before 1.0.0.66, EX6200 before 1.0.3.88, EX6150 before 1.0.0.42, EX7500 before 1.0.0.46, JNDR3000 before 1.0.0.24, R8000 before 1.0.4.18, R8500 before 1.0.2.122, R8300 before 1.0.2.122, R7900P before 1.4.0.10, R8000P before 1.4.0.10, R7900 before 1.0.2.16, R7000P before 1.3.1.44, R7300DST before 1.0.0.68, R7100LG before 1.0.0.46, R6900P before 1.3.1.44, R7000 before 1.0.9.32, R6900 before 1.0.1.46, R6700 before 1.0.1.46, R6400v2 before 1.0.2.56, R6400 before 1.0.1.42, R6300v2 before 1.0.4.28, R6250 before 1.0.4.26, WNDR4500v2 before 1.0.0.72, and WNR3500Lv2 before 1.2.0.54.

NETGEAR Insight Cloud with firmware before Insight 5.6 allows remote authenticated users to achieve command injection.

NETGEAR R7800 devices before 1.0.2.60 are affected by command injection by an authenticated user.

Certain NETGEAR devices are affected by command injection by an authenticated user. This affects D7800 before 1.0.1.44, EX6150v2 before 1.0.1.70, EX6100v2 before 1.0.1.70, EX6200v2 before 1.0.1.64, EX7300 before 1.0.2.136, EX6400 before 1.0.2.136, R6100 before 1.0.1.16, R7500 before 1.0.0.110, R7800 before 1.0.2.32, R9000 before 1.0.4.12, WN3000RPv2 before 1.0.0.56, WN3000RPv3 before 1.0.2.52, WNDR4300v2 before 1.0.0.50, and WNDR4500v3 before 1.0.0.50.

Certain NETGEAR devices are affected by command injection by an authenticated user. This affects D7800 before 1.0.1.34, R7500v2 before 1.0.3.26, R7800 before 1.0.2.42, R8900 before 1.0.3.10, R9000 before 1.0.3.10, WNDR4300v2 before 1.0.0.54, and WNDR4500v3 before 1.0.0.54.

Certain NETGEAR devices are affected by a buffer overflow by an authenticated user. This affects D7800 before 1.0.1.34, R7500v2 before 1.0.3.26, R7800 before 1.0.2.42, R8900 before 1.0.3.10, R9000 before 1.0.3.10, WNDR4300v2 before 1.0.0.54, and WNDR4500v3 before 1.0.0.54.

Certain NETGEAR devices are affected by command injection by an authenticated user. This affects D7800 before 1.0.1.34, EX6100v2 before 1.0.1.50, EX6150v2 before 1.0.1.50, EX6200v2 before 1.0.1.44, EX6400 before 1.0.1.60, EX7300 before 1.0.1.60, R6100 before 1.0.1.16, R7500 before 1.0.0.110, R7800 before 1.0.2.32, R9000 before 1.0.2.30, WN3000RPv3 before 1.0.2.50, WNDR4300v2 before 1.0.0.50, and WNDR4500v3 before 1.0.0.50.

Netgear Nighthawk R6700 version 1.0.4.120 contains a command injection vulnerability in update functionality of the device. By triggering a system update check via the SOAP interface, the device is susceptible to command injection via preconfigured values.

Netgear RAX43 version 1.0.3.96 makes use of hardcoded credentials. It does not appear that normal users are intended to be able to manipulate configuration backups due to the fact that they are encrypted. This encryption is accomplished via a password-protected zip file with a hardcoded password (RAX50w!a4udk). By unzipping the configuration using this password, a user can reconfigure settings not intended to be manipulated, re-zip the configuration, and restore a backup causing these settings to be changed.

NETGEAR R7800 net-cgi Out-Of-Bounds Write Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of NETGEAR R7800 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the parsing of the soap_block_table file. The issue results from the lack of proper validation of user-supplied data, which can result in a write past the end of an allocated data structure. An attacker can leverage this vulnerability to execute code in the context of root. . Was ZDI-CAN-13055.

Certain NETGEAR devices are affected by a stack-based buffer overflow by an authenticated user. This affects RBW30 before 2.6.2.2, RBK852 before 3.2.17.12, RBK853 before 3.2.17.12, RBK854 before 3.2.17.12, RBR850 before 3.2.17.12, RBS850 before 3.2.17.12, RBK752 before 3.2.17.12, RBK753 before 3.2.17.12, RBK753S before 3.2.17.12, RBK754 before 3.2.17.12, RBR750 before 3.2.17.12, and RBS750 before 3.2.17.12.

Certain NETGEAR devices are affected by a stack-based buffer overflow by an authenticated user. This affects RBW30 before 2.6.2.2, RBK852 before 3.2.17.12, RBK852 before 3.2.17.12, RBK852 before 3.2.17.12, RBR850 before 3.2.17.12, RBS850 before 3.2.17.12, RBK752 before 3.2.17.12, RBK753 before 3.2.17.12, RBK753S before 3.2.17.12, RBK754 before 3.2.17.12, RBR750 before 3.2.17.12, and RBS750 before 3.2.17.12.

Certain NETGEAR devices are affected by a stack-based buffer overflow by an authenticated user. This affects R8000P before 1.4.1.66, MK62 before 1.0.6.110, MR60 before 1.0.6.110, MS60 before 1.0.6.110, R7960P before 1.4.1.66, R7900P before 1.4.1.66, RAX15 before 1.0.2.82, RAX20 before 1.0.2.82, RAX45 before 1.0.2.72, RAX50 before 1.0.2.72, RAX75 before 1.0.3.106, RAX80 before 1.0.3.106, and RAX200 before 1.0.3.106.

This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of NETGEAR Nighthawk R7800. Although authentication is required to exploit this vulnerability, the existing authentication mechanism can be bypassed. The specific flaw exists within the handling of the rc_service parameter provided to apply_bind.cgi. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-12303.

A vulnerability was found in Netgear EX3700 up to 1.0.0.88. It has been classified as critical. Affected is the function sub_41619C of the file /mtd. The manipulation leads to stack-based buffer overflow. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. Upgrading to version 1.0.0.98 is able to address this issue. It is recommended to upgrade the affected component. This vulnerability only affects products that are no longer supported by the maintainer.

Certain NETGEAR devices are affected by a stack-based buffer overflow by an unauthenticated attacker. This affects R6700 before 1.0.1.48, R7900 before 1.0.2.16, R6900 before 1.0.1.48, R7000P before 1.3.1.44, R6900P before 1.3.1.44, R6250 before 1.0.4.30, R6300v2 before 1.0.4.32, R6400 before 1.0.1.44, R6400v2 before 1.0.2.60, R7000 before 1.0.9.34, R7100LG before 1.0.0.48, R7300 before 1.0.0.68, R8000 before 1.0.4.18, R8000P before 1.4.1.24, R7900P before 1.4.1.24, R8500 before 1.0.2.122, R8300 before 1.0.2.122, WN2500RPv2 before 1.0.1.54, EX3700 before 1.0.0.72, EX3800 before 1.0.0.72, EX6000 before 1.0.0.32, EX6100 before 1.0.2.24, EX6120 before 1.0.0.42, EX6130 before 1.0.0.24, EX6150v1 before 1.0.0.42, EX6200 before 1.0.3.88, EX7000 before 1.0.0.66, D7000v2 before 1.0.0.51, D6220 before 1.0.0.46, D6400 before 1.0.0.82, and D8500 before 1.0.3.42.

Certain NETGEAR devices are affected by a stack-based buffer overflow by an unauthenticated attacker. This affects WAC505 before 5.0.0.17 and WAC510 before 5.0.0.17.

Certain NETGEAR devices are affected by a stack-based buffer overflow by an unauthenticated attacker. This affects D7800 before 1.0.1.30, EX2700 before 1.0.1.28, R6100 before 1.0.1.20, R7500 before 1.0.0.118, R7500v2 before 1.0.3.24, R7800 before 1.0.2.40, R9000 before 1.0.2.52, WN2000RPTv3 before 1.0.1.20, WN3000RPv3 before 1.0.2.50, WN3100RPv2 before 1.0.0.56, WNDR3700v4 before 1.0.2.96, WNDR4300 before 1.0.2.98, WNDR4300v2 before 1.0.0.50, and WNDR4500v3 before 1.0.0.50.

Certain NETGEAR devices are affected by a stack-based buffer overflow by an unauthenticated attacker. This affects D3600 before 1.0.0.67, D6000 before 1.0.0.67, D7800 before 1.0.1.30, EX2700 before 1.0.1.28, R6100 before 1.0.1.20, R7500 before 1.0.0.118, R7500v2 before 1.0.3.24, R7800 before 1.0.2.40, R9000 before 1.0.2.52, WN2000RPTv3 before 1.0.1.20, WN3000RPv3 before 1.0.2.50, WN3100RPv2 before 1.0.0.56, WNDR3700v4 before 1.0.2.96, WNDR4300 before 1.0.2.98, WNDR4300v2 before 1.0.0.50, and WNDR4500v3 before 1.0.0.50.

Certain NETGEAR devices are affected by a stack-based buffer overflow by an unauthenticated attacker. This affects R6100 before 1.0.1.20, R9000 before 1.0.2.52, WNDR3700v4 before 1.0.2.96, WNDR4300 before 1.0.2.98, WNDR4300v2 before 1.0.0.50, and WNDR4500v3 before 1.0.0.50.

Certain NETGEAR devices are affected by a stack-based buffer overflow by an unauthenticated attacker. This affects D7800 before 1.0.1.30, R6100 before 1.0.1.20, R7500 before 1.0.0.118, R7500v2 before 1.0.3.24, R7800 before 1.0.2.40, R9000 before 1.0.2.52, WNDR3700v4 before 1.0.2.96, WNDR4300 before 1.0.2.98, WNDR4300v2 before 1.0.0.54, and WNDR4500v3 before 1.0.0.54.

Certain NETGEAR devices are affected by a stack-based buffer overflow by an unauthenticated attacker. This affects EX2700 before 1.0.1.28, R7800 before 1.0.2.40, WN2000RPTv3 before 1.0.1.20, WN3000RPv3 before 1.0.2.50, and WN3100RPv2 before 1.0.0.56.

A vulnerability has been found in Netgear R6900P and R7000P 1.3.3.154 and classified as critical. Affected by this vulnerability is the function sub_16C4C of the component HTTP Header Handler. The manipulation of the argument Host leads to buffer overflow. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

Certain NETGEAR devices are affected by a stack-based buffer overflow by an unauthenticated attacker. This affects D3600 before 1.0.0.76, D6000 before 1.0.0.78, D6200 before 1.1.00.32, D7000 before 1.0.1.68, D7800 before 1.0.1.56, DM200 before 1.0.0.61, EX2700 before 1.0.1.52, EX6100v2 before 1.0.1.76, EX6150v2 before 1.0.1.76, EX6200v2 before 1.0.1.74, EX6400 before 1.0.2.140, EX7300 before 1.0.2.140, EX8000 before 1.0.1.186, JR6150 before 1.0.1.18, PR2000 before 1.0.0.28, R6020 before 1.0.0.38, R6050 before 1.0.1.18, R6080 before 1.0.0.38, R6120 before 1.0.0.46, R6220 before 1.1.0.80, R6230 before 1.1.0.80, R6260 before 1.1.0.40, R6700v2 before 1.2.0.36, R6800 before 1.2.0.36, R6900v2 before 1.2.0.36, R7500v2 before 1.0.3.40, R7800 before 1.0.2.62, R8900 before 1.0.4.12, R9000 before 1.0.4.12, RBK20 before 2.3.0.28, RBR20 before 2.3.0.28, RBS20 before 2.3.0.28, RBK40 before 2.3.0.28, RBR40 before 2.3.0.28, RBS40 before 2.3.0.28, RBK50 before 2.3.0.32, RBR50 before 2.3.0.32, RBS50 before 2.3.0.32, WN2000RPTv3 before 1.0.1.34, WN3000RPv2 before 1.0.0.78, WN3000RPv2 before 1.0.0.78, WN3000RPv3 before 1.0.2.78, WN3100RPv2 before 1.0.0.66, WNR2000v5 before 1.0.0.70, WNR2020 before 1.1.0.62, XR450 before 2.3.2.32, and XR500 before 2.3.2.32.

upnpd on certain NETGEAR devices allows remote (LAN) attackers to execute arbitrary code via a stack-based buffer overflow. This affects R6400v2 V1.0.4.102_10.0.75, R6400 V1.0.1.62_1.0.41, R7000P V1.3.2.126_10.1.66, XR300 V1.0.3.50_10.3.36, R8000 V1.0.4.62, R8300 V1.0.2.136, R8500 V1.0.2.136, R7300DST V1.0.0.74, R7850 V1.0.5.64, R7900 V1.0.4.30, RAX20 V1.0.2.64, RAX80 V1.0.3.102, and R6250 V1.0.4.44.

Certain NETGEAR devices are affected by a stack-based buffer overflow by an authenticated user. This affects D6100 before 1.0.0.63, R7800 before 1.0.2.60, R8900 before 1.0.4.26, R9000 before 1.0.4.26, RBK20 before 2.3.0.28, RBR20 before 2.3.0.28, RBS20 before 2.3.0.28, RBK50 before 2.3.0.32, RBR50 before 2.3.0.32, RBS50 before 2.3.0.32, RBK40 before 2.3.0.28, RBR40 before 2.3.0.28, RBS40 before 2.3.0.28, SRK60 before 2.2.2.20, SRR60 before 2.2.2.20, SRS60 before 2.2.2.20, WN3000RPv2 before 1.0.0.78, WNDR4300v2 before 1.0.0.58, WNDR4500v3 before 1.0.0.58, WNR2000v5 before 1.0.0.70, XR450 before 2.3.2.40, and XR500 before 2.3.2.40.

In Netgear Orbi RBR750 firmware before V7.2.6.21, there is a stack-based buffer overflow in /usr/sbin/httpd.

This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of NETGEAR R6400v2 1.0.4.106_10.0.80 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the UPnP service, which listens on TCP port 5000 by default. When parsing the uuid request header, the process does not properly validate the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-14110.

NETGEAR RAX30 Telnet CLI passwd Stack-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of NETGEAR RAX30 routers. Although authentication is required to exploit this vulnerability, the existing authentication mechanism can be bypassed. The specific flaw exists within the telnet CLI service, which listens on TCP port 23. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-20009.

NETGEAR RAX30 cmsCli_authenticate Stack-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of NETGEAR RAX30 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within a shared library used by the telnetd service, which listens on TCP port 23 by default. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-19918.

Certain NETGEAR devices are affected by a stack-based buffer overflow by an unauthenticated attacker. This affects D6220 before 1.0.0.44, D6400 before 1.0.0.78, D7000v2 before 1.0.0.51, D8500 before 1.0.3.42, DGN2200v4 before 1.0.0.110, DGND2200Bv4 before 1.0.0.109, EX3700 before 1.0.0.70, EX3800 before 1.0.0.70, EX6000 before 1.0.0.30, EX6100 before 1.0.2.24, EX6120 before 1.0.0.40, EX6130 before 1.0.0.22, EX6150v1 before 1.0.0.42, EX6200 before 1.0.3.88, EX7000 before 1.0.0.66, R6250 before 1.0.4.26, R6300v2 before 1.0.4.28, R6400 before 1.0.1.36, R6400v2 before 1.0.2.52, R6700 before 1.0.1.46, R6900 before 1.0.1.46, R7000 before 1.0.9.28, R6900P before 1.3.1.44, R7000P before 1.3.1.44, R7100LG before 1.0.0.46, R7300DST before 1.0.0.68, R7900 before 1.0.2.10, R8000 before 1.0.4.12, R7900P before 1.3.0.10, R8000P before 1.3.0.10, R8300 before 1.0.2.122, R8500 before 1.0.2.122, WN2500RPv2 before 1.0.1.54, WNDR3400v3 before 1.0.1.22, and WNR3500Lv2 before 1.2.0.54.